/**************************************************************************** * net/sixlowpan/sixlowpan_framelist.c * * Copyright (C) 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Parts of this file derive from Contiki: * * Copyright (c) 2008, Swedish Institute of Computer Science. * All rights reserved. * Authors: Adam Dunkels * Nicolas Tsiftes * Niclas Finne * Mathilde Durvy * Julien Abeille * Joakim Eriksson * Joel Hoglund * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "sixlowpan/sixlowpan_internal.h" #ifdef CONFIG_NET_6LOWPAN /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* A single IOB must be big enough to hold a full frame */ #if CONFIG_IOB_BUFSIZE < CONFIG_NET_6LOWPAN_FRAMELEN # error IOBs must be large enough to hold full IEEE802.14.5 frame #endif /* There must be at least enough IOBs to hold the full MTU. Probably still * won't work unless there are a few more. */ #if CONFIG_NET_6LOWPAN_MTU > (CONFIG_IOB_BUFSIZE * CONFIG_IOB_NBUFFERS) # error Not enough IOBs to hold one full 6LoWPAN packet #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: sixlowpan_compress_ipv6hdr * * Description: * IPv6 dispatch "compression" function. Packets "Compression" when only * IPv6 dispatch is used * * There is no compression in this case, all fields are sent * inline. We just add the IPv6 dispatch byte before the packet. * * 0 1 2 3 * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | IPv6 Dsp | IPv6 header and payload ... * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * Input Parameters: * ipv6hdr - Pointer to the IPv6 header to "compress" * fptr - Pointer to the beginning of the frame under construction * * Returned Value: * None * ****************************************************************************/ static void sixlowpan_compress_ipv6hdr(FAR const struct ipv6_hdr_s *ipv6hdr, FAR uint8_t *fptr) { uint16_t protosize; /* Indicate the IPv6 dispatch and length */ fptr[g_frame_hdrlen] = SIXLOWPAN_DISPATCH_IPV6; g_frame_hdrlen += SIXLOWPAN_IPV6_HDR_LEN; /* Copy the IPv6 header and adjust pointers */ memcpy(&fptr[g_frame_hdrlen] , ipv6hdr, IPv6_HDRLEN); g_frame_hdrlen += IPv6_HDRLEN; g_uncomp_hdrlen += IPv6_HDRLEN; /* Copy the following protocol header, */ switch (ipv6hdr->proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: { FAR struct tcp_hdr_s *tcp = &((FAR struct ipv6tcp_hdr_s *)ipv6hdr)->tcp; /* The TCP header length is encoded in the top 4 bits of the * tcpoffset field (in units of 32-bit words). */ protosize = ((uint16_t)tcp->tcpoffset >> 4) << 2; } break; #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: protosize = sizeof(struct udp_hdr_s); break; #endif #ifdef CONFIG_NET_ICMPv6 case IP_PROTO_ICMP6: protosize = sizeof(struct icmpv6_hdr_s); break; #endif default: nwarn("WARNING: Unrecognized proto: %u\n", ipv6hdr->proto); return; } /* Copy the protocol header. */ memcpy(fptr + g_frame_hdrlen, (FAR uint8_t *)ipv6hdr + g_uncomp_hdrlen, protosize); g_frame_hdrlen += protosize; g_uncomp_hdrlen += protosize; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: sixlowpan_queue_frames * * Description: * Process an outgoing UDP or TCP packet. This function is called from * send interrupt logic when a TX poll is received. It formats the * list of frames to be sent by the IEEE802.15.4 MAC driver. * * The payload data is in the caller 'buf' and is of length 'buflen'. * Compressed headers will be added and if necessary the packet is * fragmented. The resulting packet/fragments are submitted to the MAC * where they are queue for transfer. * * Input Parameters: * ieee - The IEEE802.15.4 MAC driver instance * ipv6hdr - IPv6 header followed by TCP, UDP, or ICMPv6 header. * buf - Beginning of the packet packet to send (with IPv6 + protocol * headers) * buflen - Length of data to send (include IPv6 and protocol headers) * destmac - The IEEE802.15.4 MAC address of the destination * * Returned Value: * Ok is returned on success; Othewise a negated errno value is returned. * This function is expected to fail if the driver is not an IEEE802.15.4 * MAC network driver. In that case, the UDP/TCP will fall back to normal * IPv4/IPv6 formatting. * * Assumptions: * Called with the network locked. * ****************************************************************************/ int sixlowpan_queue_frames(FAR struct ieee802154_driver_s *ieee, FAR const struct ipv6_hdr_s *destip, FAR const void *buf, size_t buflen, FAR const struct rimeaddr_s *destmac) { struct ieee802154_frame_meta_s meta; FAR struct iob_s *iob; FAR uint8_t *fptr; int framer_hdrlen; struct rimeaddr_s bcastmac; uint16_t pktlen; uint16_t paysize; uint16_t dest_panid; #ifdef CONFIG_NET_6LOWPAN_FRAG uint16_t outlen = 0; #endif int ret; /* Initialize global data. Locking the network guarantees that we have * exclusive use of the global values for intermediate calculations. */ g_uncomp_hdrlen = 0; g_frame_hdrlen = 0; /* Reset rime buffer, packet buffer metatadata */ memset(g_pktattrs, 0, PACKETBUF_NUM_ATTRS * sizeof(uint16_t)); memset(g_pktaddrs, 0, PACKETBUF_NUM_ADDRS * sizeof(struct rimeaddr_s)); g_pktattrs[PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS] = CONFIG_NET_6LOWPAN_MAX_MACTRANSMITS; /* Set stream mode for all TCP packets, except FIN packets. */ if (destip->proto == IP_PROTO_TCP) { FAR const struct tcp_hdr_s *tcp = &((FAR const struct ipv6tcp_hdr_s *)destip)->tcp; if ((tcp->flags & TCP_FIN) == 0 && (tcp->flags & TCP_CTL) != TCP_ACK) { g_pktattrs[PACKETBUF_ATTR_PACKET_TYPE] = PACKETBUF_ATTR_PACKET_TYPE_STREAM; } else if ((tcp->flags & TCP_FIN) == TCP_FIN) { g_pktattrs[PACKETBUF_ATTR_PACKET_TYPE] = PACKETBUF_ATTR_PACKET_TYPE_STREAM_END; } } /* The destination address will be tagged to each outbound packet. If the * argument destmac is NULL, we are sending a broadcast packet. */ if (destmac == NULL) { memset(&bcastmac, 0, sizeof(struct rimeaddr_s)); destmac = &bcastmac; } /* Pre-allocate the IOB to hold frame or the first fragment, waiting if * necessary. */ iob = iob_alloc(false); DEBUGASSERT(iob != NULL); /* Initialize the IOB */ iob->io_flink = NULL; iob->io_len = 0; iob->io_offset = 0; iob->io_pktlen = 0; fptr = iob->io_data; ninfo("Sending packet length %d\n", buflen); /* Set the source and destination address */ rimeaddr_copy(&g_pktaddrs[PACKETBUF_ADDR_SENDER], &ieee->i_dev.d_mac.ieee802154); rimeaddr_copy(&g_pktaddrs[PACKETBUF_ADDR_RECEIVER], destmac); /* Get the destination PAN ID. * * REVISIT: For now I am assuming that the source and destination * PAN IDs are the same. */ dest_panid = 0xffff; (void)sixlowpan_src_panid(ieee, &dest_panid); /* Based on the collected attributes and addresses, construct the MAC meta * data structure that we need to interface with the IEEE802.15.4 MAC. */ ret = sixlowpan_meta_data(dest_panid, &meta); if (ret < 0) { nerr("ERROR: sixlowpan_meta_data() failed: %d\n", ret); } /* Pre-calculate frame header length. */ framer_hdrlen = sixlowpan_frame_hdrlen(ieee, &meta); if (framer_hdrlen < 0) { /* Failed to determine the size of the header failed. */ nerr("ERROR: sixlowpan_frame_hdrlen() failed: %d\n", framer_hdrlen); return framer_hdrlen; } /* This sill be the initial offset into io_data. Valid data begins at * this offset and must be reflected in io_offset. */ g_frame_hdrlen = framer_hdrlen; iob->io_offset = framer_hdrlen; #ifndef CONFIG_NET_6LOWPAN_COMPRESSION_IPv6 if (buflen >= CONFIG_NET_6LOWPAN_COMPRESSION_THRESHOLD) { /* Try to compress the headers */ #if defined(CONFIG_NET_6LOWPAN_COMPRESSION_HC1) sixlowpan_compresshdr_hc1(ieee, destip, destmac, fptr); #elif defined(CONFIG_NET_6LOWPAN_COMPRESSION_HC06) sixlowpan_compresshdr_hc06(ieee, destip, destmac, fptr); #else # error No compression specified #endif } else #endif /* !CONFIG_NET_6LOWPAN_COMPRESSION_IPv6 */ { /* Small.. use IPv6 dispatch (no compression) */ sixlowpan_compress_ipv6hdr(destip, fptr); } ninfo("Header of length %d\n", g_frame_hdrlen); /* Check if we need to fragment the packet into several frames */ if (buflen > (CONFIG_NET_6LOWPAN_FRAMELEN - g_frame_hdrlen)) { #ifdef CONFIG_NET_6LOWPAN_FRAG /* qhead will hold the generated frame list; frames will be * added at qtail. */ FAR struct iob_s *qhead; FAR struct iob_s *qtail; FAR uint8_t *frame1; FAR uint8_t *fragptr; uint16_t frag1_hdrlen; /* The outbound IPv6 packet is too large to fit into a single 15.4 * packet, so we fragment it into multiple packets and send them. * The first fragment contains frag1 dispatch, then * IPv6/HC1/HC06/HC_UDP dispatchs/headers. * The following fragments contain only the fragn dispatch. */ ninfo("Sending fragmented packet length %d\n", buflen); /* Create 1st Fragment */ /* Move HC1/HC06/IPv6 header to make space for the FRAG1 header at the * beginning of the frame. */ fragptr = fptr + framer_hdrlen; memmove(fragptr + SIXLOWPAN_FRAG1_HDR_LEN, fragptr, g_frame_hdrlen - framer_hdrlen); /* Setup up the fragment header. * * The fragment header contains three fields: Datagram size, datagram * tag and datagram offset: * * 1. Datagram size describes the total (un-fragmented) payload. * 2. Datagram tag identifies the set of fragments and is used to * match fragments of the same payload. * 3. Datagram offset identifies the fragment’s offset within the un- * fragmented payload. * * The fragment header length is 4 bytes for the first header and 5 * bytes for all subsequent headers. */ pktlen = buflen + g_uncomp_hdrlen; PUTINT16(fragptr, RIME_FRAG_DISPATCH_SIZE, ((SIXLOWPAN_DISPATCH_FRAG1 << 8) | pktlen)); PUTINT16(fragptr, RIME_FRAG_TAG, ieee->i_dgramtag); g_frame_hdrlen += SIXLOWPAN_FRAG1_HDR_LEN; /* Copy payload and enqueue. NOTE that the size is a multiple of eight * bytes. */ paysize = (CONFIG_NET_6LOWPAN_FRAMELEN - g_frame_hdrlen) & ~7; memcpy(fptr + g_frame_hdrlen, buf, paysize); /* Set outlen to what we already sent from the IP payload */ iob->io_len = paysize + g_frame_hdrlen; outlen = paysize; ninfo("First fragment: length %d, tag %d\n", paysize, ieee->i_dgramtag); sixlowpan_dumpbuffer("Outgoing frame", (FAR const uint8_t *)iob->io_data, iob->io_len); /* Add the first frame to the IOB queue */ qhead = iob; qtail = iob; /* Keep track of the total amount of data queue */ iob->io_pktlen = iob->io_len; /* Create following fragments */ frame1 = iob->io_data; frag1_hdrlen = g_frame_hdrlen; while (outlen < buflen) { uint16_t fragn_hdrlen; /* Allocate an IOB to hold the next fragment, waiting if * necessary. */ iob = iob_alloc(false); DEBUGASSERT(iob != NULL); /* Initialize the IOB */ iob->io_flink = NULL; iob->io_len = 0; iob->io_offset = framer_hdrlen; iob->io_pktlen = 0; fptr = iob->io_data; /* Copy the HC1/HC06/IPv6 header the frame header from first * frame, into the correct location after the FRAGN header * of subsequent frames. */ fragptr = fptr + framer_hdrlen; memcpy(fragptr + SIXLOWPAN_FRAGN_HDR_LEN, frame1 + framer_hdrlen + SIXLOWPAN_FRAG1_HDR_LEN, frag1_hdrlen - framer_hdrlen); fragn_hdrlen = frag1_hdrlen - SIXLOWPAN_FRAG1_HDR_LEN; /* Setup up the FRAGN header after the frame header. */ PUTINT16(fragptr, RIME_FRAG_DISPATCH_SIZE, ((SIXLOWPAN_DISPATCH_FRAGN << 8) | pktlen)); PUTINT16(fragptr, RIME_FRAG_TAG, ieee->i_dgramtag); fragptr[RIME_FRAG_OFFSET] = outlen >> 3; fragn_hdrlen += SIXLOWPAN_FRAGN_HDR_LEN; /* Copy payload and enqueue */ /* Check for the last fragment */ paysize = (CONFIG_NET_6LOWPAN_FRAMELEN - fragn_hdrlen) & SIXLOWPAN_DISPATCH_FRAG_MASK; if (buflen - outlen < paysize) { /* Last fragment, truncate to the correct length */ paysize = buflen - outlen; } memcpy(fptr + fragn_hdrlen, buf + outlen, paysize); /* Set outlen to what we already sent from the IP payload */ iob->io_len = paysize + fragn_hdrlen; outlen += paysize; ninfo("Fragment offset=%d, paysize=%d, i_dgramtag=%d\n", outlen >> 3, paysize, ieee->i_dgramtag); sixlowpan_dumpbuffer("Outgoing frame", (FAR const uint8_t *)iob->io_data, iob->io_len); /* Add the next frame to the tail of the IOB queue */ qtail->io_flink = iob; qtail = iob; /* Keep track of the total amount of data queue */ qhead->io_pktlen += iob->io_len; } /* Submit all of the fragments to the MAC. We send all frames back- * to-back like this to eliminate any possible condition where some * frame which is not a fragment from this sequence from intervening. */ ret = sixlowpan_frame_submit(ieee, &meta, qhead); if (ret < 0) { nerr("ERROR: sixlowpan_frame_submit() failed: %d\n", ret); } /* Update the datagram TAG value */ ieee->i_dgramtag++; #else nerr("ERROR: Packet too large: %d\n", buflen); nerr(" Cannot to be sent without fragmentation support\n"); nerr(" dropping packet\n"); return -E2BIG; #endif } else { /* The packet does not need to be fragmented just copy the "payload" * and send in one frame. */ /* Copy the payload into the frame. */ memcpy(fptr + g_frame_hdrlen, buf, buflen); iob->io_len = buflen + g_frame_hdrlen; iob->io_pktlen = iob->io_len; ninfo("Non-fragmented: length %d\n", iob->io_len); sixlowpan_dumpbuffer("Outgoing frame", (FAR const uint8_t *)iob->io_data, iob->io_len); /* Submit the frame to the MAC */ ret = sixlowpan_frame_submit(ieee, &meta, iob); if (ret < 0) { nerr("ERROR: sixlowpan_frame_submit() failed: %d\n", ret); } } return OK; } #endif /* CONFIG_NET_6LOWPAN */