/**************************************************************************** * syscall/syscall_stublookup.c * * Copyright (C) 2011-2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include /* The content of this file is only meaningful during the kernel phase of * a kernel build. */ #if defined(CONFIG_LIB_SYSCALL) /**************************************************************************** * Pre-processor definitions ****************************************************************************/ /**************************************************************************** * Stub Function Prototypes ****************************************************************************/ /* These first system calls are supported regardless of the NuttX * configuration */ uintptr_t STUB__exit(int nbr, uintptr_t parm1); uintptr_t STUB_exit(int nbr, uintptr_t parm1); uintptr_t STUB_get_errno(int nbr); uintptr_t STUB_getpid(int nbr); uintptr_t STUB_sched_getparam(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_sched_getscheduler(int nbr, uintptr_t parm1); uintptr_t STUB_sched_lock(int nbr); uintptr_t STUB_sched_lockcount(int nbr); uintptr_t STUB_sched_rr_get_interval(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_sched_setparam(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_sched_setscheduler(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sched_unlock(int nbr); uintptr_t STUB_sched_yield(int nbr); /* Semaphores */ uintptr_t STUB_sem_close(int nbr, uintptr_t parm1); uintptr_t STUB_sem_destroy(int nbr, uintptr_t parm1); uintptr_t STUB_sem_open(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_sem_post(int nbr, uintptr_t parm1); uintptr_t STUB_sem_timedwait(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_sem_trywait(int nbr, uintptr_t parm1); uintptr_t STUB_sem_unlink(int nbr, uintptr_t parm1); uintptr_t STUB_sem_wait(int nbr, uintptr_t parm1); uintptr_t STUB_set_errno(int nbr, uintptr_t parm1); uintptr_t STUB_pgalloc(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_task_create(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_task_delete(int nbr, uintptr_t parm1); uintptr_t STUB_task_restart(int nbr, uintptr_t parm1); uintptr_t STUB_up_assert(int nbr, uintptr_t parm1, uintptr_t parm2); /* The following can be individually enabled */ uintptr_t STUB_vfork(int nbr); uintptr_t STUB_atexit(int nbr, uintptr_t parm1); uintptr_t STUB_on_exit(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_waitpid(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_wait(int nbr, uintptr_t parm1); uintptr_t STUB_waitid(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); /* The following can only be defined if we are configured to execute * programs from a file system. */ uintptr_t STUB_posix_spawn(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_posix_spawnp(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_execv(int nbr, uintptr_t parm1, uintptr_t parm2); /* The following are only defined is signals are supported in the NuttX * configuration. */ uintptr_t STUB_kill(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_sigaction(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sigpending(int nbr, uintptr_t parm1); uintptr_t STUB_sigprocmask(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sigqueue(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sigsuspend(int nbr, uintptr_t parm1); uintptr_t STUB_sigtimedwait(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sigwaitinfo(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_nanosleep(int nbr, uintptr_t parm1, uintptr_t parm2); /* The following are only defined if the system clock is enabled in the * NuttX configuration. */ uintptr_t STUB_clock_systimer(int nbr); uintptr_t STUB_clock_getres(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_clock_gettime(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_clock_settime(int nbr, uintptr_t parm1, uintptr_t parm2); /* The following are defined only if POSIX timers are supported */ uintptr_t STUB_timer_create(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_timer_delete(int nbr, uintptr_t parm1); uintptr_t STUB_timer_getoverrun(int nbr, uintptr_t parm1); uintptr_t STUB_timer_gettime(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_timer_settime(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); /* The following are defined if either file or socket descriptor are * enabled. */ uintptr_t STUB_close(int nbr, uintptr_t parm1); #ifdef CONFIG_LIBC_IOCTL_VARIADIC uintptr_t STUB_fs_ioctl(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); #else uintptr_t STUB_ioctl(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); #endif uintptr_t STUB_read(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_write(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_pread(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_pwrite(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_poll(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_select(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_aio_read(int nbr, uintptr_t parm1); uintptr_t STUB_aio_write(int nbr, uintptr_t parm1); uintptr_t STUB_aio_fsync(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_aio_cancel(int nbr, uintptr_t parm1, uintptr_t parm2); /* Board support */ uintptr_t STUB_boardctl(int nbr, uintptr_t parm1, uintptr_t parm2); /* The following are defined if file descriptors are enabled */ uintptr_t STUB_closedir(int nbr, uintptr_t parm1); uintptr_t STUB_dup(int nbr, uintptr_t parm1); uintptr_t STUB_dup2(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_fcntl(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_lseek(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_mkfifo(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_mmap(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_open(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_opendir(int nbr, uintptr_t parm1); uintptr_t STUB_pipe(int nbr, uintptr_t parm1); uintptr_t STUB_readdir(int nbr, uintptr_t parm1); uintptr_t STUB_rewinddir(int nbr, uintptr_t parm1); uintptr_t STUB_seekdir(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_stat(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_statfs(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_telldir(int nbr, uintptr_t parm1); uintptr_t STUB_fs_fdopen(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_sched_getstreams(int nbr); ssize_t sendfile(int outfd, int infd, FAR off_t *offset, size_t count); uintptr_t STUB_fsync(int nbr, uintptr_t parm1); uintptr_t STUB_mkdir(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_mount(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_rename(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_rmdir(int nbr, uintptr_t parm1); uintptr_t STUB_umount2(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_unlink(int nbr, uintptr_t parm1); /* Shared memory interfaces */ uintptr_t STUB_shmget(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_shmat(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_shmctl(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_shmdt(int nbr, uintptr_t parm1); /* The following are defined if pthreads are enabled */ uintptr_t STUB_pthread_barrier_destroy(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_barrier_init(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_pthread_barrier_wait(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_cancel(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_cond_broadcast(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_cond_destroy(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_cond_init(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_cond_signal(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_cond_wait(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_create(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_pthread_detach(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_exit(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_getschedparam(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_pthread_getspecific(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_join(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_key_create(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_key_delete(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_mutex_destroy(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_mutex_init(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_mutex_lock(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_mutex_trylock(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_mutex_unlock(int nbr, uintptr_t parm1); uintptr_t STUB_pthread_once(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_setcancelstate(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_setschedparam(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_pthread_setschedprio(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_setspecific(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_yield(int nbr); uintptr_t STUB_pthread_cond_timedwait(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_pthread_kill(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_pthread_sigmask(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); /* The following are defined only if message queues are enabled */ uintptr_t STUB_mq_close(int nbr, uintptr_t parm1); uintptr_t STUB_mq_getattr(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_mq_notify(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_mq_open(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_mq_receive(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_mq_send(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_mq_setattr(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_mq_timedreceive(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_mq_timedsend(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_mq_unlink(int nbr, uintptr_t parm1); /* The following are defined only if environment variables are supported */ uintptr_t STUB_clearenv(int nbr); uintptr_t STUB_getenv(int nbr, uintptr_t parm1); uintptr_t STUB_putenv(int nbr, uintptr_t parm1); uintptr_t STUB_setenv(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_unsetenv(int nbr, uintptr_t parm1); /* The following are defined only if networking AND sockets are supported */ uintptr_t STUB_accept(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_bind(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_connect(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); uintptr_t STUB_getsockopt(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_listen(int nbr, uintptr_t parm1, uintptr_t parm2); uintptr_t STUB_recv(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_recvfrom(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_send(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4); uintptr_t STUB_sendto(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5, uintptr_t parm6); uintptr_t STUB_setsockopt(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); uintptr_t STUB_socket(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3); /* The following is defined only if CONFIG_TASK_NAME_SIZE > 0 */ uintptr_t STUB_prctl(int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3, uintptr_t parm4, uintptr_t parm5); /**************************************************************************** * Public Data ****************************************************************************/ /* Stub lookup tables. This table is indexed by the system call number. * Given the system call number, the corresponding entry in this table * provides the address of the stub function. */ const uintptr_t g_stublookup[SYS_nsyscalls] = { # undef SYSCALL_LOOKUP1 # define SYSCALL_LOOKUP1(f,n,p) (uintptr_t)p # undef SYSCALL_LOOKUP # define SYSCALL_LOOKUP(f,n,p) , (uintptr_t)p # include "syscall_lookup.h" }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ #endif /* CONFIG_LIB_SYSCALL */