/**************************************************************************** * include/sys/socket.h * * Copyright (C) 2007, 2009, 2011, 2015-2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __INCLUDE_SYS_SOCKET_H #define __INCLUDE_SYS_SOCKET_H /**************************************************************************** * Included Files ****************************************************************************/ #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* The socket()domain parameter specifies a communication domain; this selects * the protocol family which will be used for communication. */ /* Supported Protocol Families */ #define PF_UNSPEC 0 /* Protocol family unspecified */ #define PF_UNIX 1 /* Local communication */ #define PF_LOCAL 1 /* Local communication */ #define PF_INET 2 /* IPv4 Internet protocols */ #define PF_INET6 3 /* IPv6 Internet protocols */ #define PF_PACKET 4 /* Low level packet interface */ #define PF_IEEE802154 5 /* Low level IEEE 802.15.4 radio frame interface */ #define PF_PKTRADIO 6 /* Low level packet radio interface */ /* Supported Address Families. Opengroup.org requires only AF_UNSPEC, * AF_UNIX, AF_INET and AF_INET6. */ #define AF_UNSPEC PF_UNSPEC #define AF_UNIX PF_UNIX #define AF_LOCAL PF_LOCAL #define AF_INET PF_INET #define AF_INET6 PF_INET6 #define AF_PACKET PF_PACKET #define AF_IEEE802154 PF_IEEE802154 #define AF_PKTRADIO PF_PKTRADIO /* The socket created by socket() has the indicated type, which specifies * the communication semantics. */ #define SOCK_STREAM 0 /* Provides sequenced, reliable, two-way, connection-based byte streams. * An out-of-band data transmission mechanism may be supported. */ #define SOCK_DGRAM 1 /* Supports datagrams (connectionless, unreliable messages of a fixed * maximum length). */ #define SOCK_SEQPACKET 2 /* Provides a sequenced, reliable, two-way connection-based data * transmission path for datagrams of fixed maximum length; a consumer * is required to read an entire packet with each read system call. */ #define SOCK_RAW 3 /* Provides raw network protocol access. */ #define SOCK_RDM 4 /* Provides a reliable datagram layer that does not guarantee ordering. */ #define SOCK_PACKET 5 /* Obsolete and should not be used in new programs */ /* Bits in the FLAGS argument to `send', `recv', et al. These are the bits * recognized by Linus, not all are supported by NuttX. */ #define MSG_OOB 0x0001 /* Process out-of-band data. */ #define MSG_PEEK 0x0002 /* Peek at incoming messages. */ #define MSG_DONTROUTE 0x0004 /* Don't use local routing. */ #define MSG_CTRUNC 0x0008 /* Control data lost before delivery. */ #define MSG_PROXY 0x0010 /* Supply or ask second address. */ #define MSG_TRUNC 0x0020 #define MSG_DONTWAIT 0x0040 /* Enable nonblocking IO. */ #define MSG_EOR 0x0080 /* End of record. */ #define MSG_WAITALL 0x0100 /* Wait for a full request. */ #define MSG_FIN 0x0200 #define MSG_SYN 0x0400 #define MSG_CONFIRM 0x0800 /* Confirm path validity. */ #define MSG_RST 0x1000 #define MSG_ERRQUEUE 0x2000 /* Fetch message from error queue. */ #define MSG_NOSIGNAL 0x4000 /* Do not generate SIGPIPE. */ #define MSG_MORE 0x8000 /* Sender will send more. */ /* Protocol levels supported by get/setsockopt(): */ #define SOL_SOCKET 0 /* Only socket-level options supported */ /* Socket-level options */ #define SO_ACCEPTCONN 0 /* Reports whether socket listening is enabled (get only). * arg: pointer to integer containing a boolean value */ #define SO_BROADCAST 1 /* Permits sending of broadcast messages (get/set). * arg: pointer to integer containing a boolean value */ #define SO_DEBUG 2 /* Enables recording of debugging information (get/set). * arg: pointer to integer containing a boolean value */ #define SO_DONTROUTE 3 /* Requests that outgoing messages bypass standard routing (get/set) * arg: pointer to integer containing a boolean value */ #define SO_ERROR 4 /* Reports and clears error status (get only). arg: returns * an integer value */ #define SO_KEEPALIVE 5 /* Keeps connections active by enabling the periodic transmission * of messages (get/set). * arg: pointer to integer containing a boolean value */ #define SO_LINGER 6 /* Lingers on a close() if data is present (get/set) * arg: struct linger */ #define SO_OOBINLINE 7 /* Leaves received out-of-band data (data marked urgent) inline * (get/set) arg: pointer to integer containing a boolean value */ #define SO_RCVBUF 8 /* Sets receive buffer size. arg: integer value (get/set). */ #define SO_RCVLOWAT 9 /* Sets the minimum number of bytes to process for socket input * (get/set). arg: integer value */ #define SO_RCVTIMEO 10 /* Sets the timeout value that specifies the maximum amount of time * an input function waits until it completes (get/set). * arg: struct timeval */ #define SO_REUSEADDR 11 /* Allow reuse of local addresses (get/set) * arg: pointer to integer containing a boolean value */ #define SO_SNDBUF 12 /* Sets send buffer size. arg: integer value (get/set). */ #define SO_SNDLOWAT 13 /* Sets the minimum number of bytes to process for socket output * (get/set). arg: integer value */ #define SO_SNDTIMEO 14 /* Sets the timeout value specifying the amount of time that an * output function blocks because flow control prevents data from * being sent(get/set). arg: struct timeval */ #define SO_TYPE 15 /* Reports the socket type (get only). return: int */ /* Protocol-level socket options may begin with this value */ #define __SO_PROTOCOL 16 /* Values for the 'how' argument of shutdown() */ #define SHUT_RD 1 /* Bit 0: Disables further receive operations */ #define SHUT_WR 2 /* Bit 1: Disables further send operations */ #define SHUT_RDWR 3 /* Bits 0+1: Disables further send and receive operations */ /**************************************************************************** * Type Definitions ****************************************************************************/ /* sockaddr_storage structure. This structure must be (1) large enough to * accommodate all supported protocol-specific address structures, and (2) * aligned at an appropriate boundary so that pointers to it can be cast * as pointers to protocol-specific address structures and used to access * the fields of those structures without alignment problems */ #ifdef CONFIG_NET_IPv6 struct sockaddr_storage { sa_family_t ss_family; /* Address family */ char ss_data[18]; /* 18-bytes of address data */ }; #else struct sockaddr_storage { sa_family_t ss_family; /* Address family */ char ss_data[14]; /* 14-bytes of address data */ }; #endif /* The sockaddr structure is used to define a socket address which is used * in the bind(), connect(), getpeername(), getsockname(), recvfrom(), and * sendto() functions. */ struct sockaddr { sa_family_t sa_family; /* Address family: See AF_* definitions */ char sa_data[14]; /* 14-bytes of address data */ }; /* Used with the SO_LINGER socket option */ struct linger { int l_onoff; /* Indicates whether linger option is enabled. */ int l_linger; /* Linger time, in seconds. */ }; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif int socket(int domain, int type, int protocol); int bind(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen); int connect(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen); int listen(int sockfd, int backlog); int accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen); ssize_t send(int sockfd, FAR const void *buf, size_t len, int flags); ssize_t sendto(int sockfd, FAR const void *buf, size_t len, int flags, FAR const struct sockaddr *to, socklen_t tolen); ssize_t recv(int sockfd, FAR void *buf, size_t len, int flags); ssize_t recvfrom(int sockfd, FAR void *buf, size_t len, int flags, FAR struct sockaddr *from, FAR socklen_t *fromlen); int shutdown(int sockfd, int how); int setsockopt(int sockfd, int level, int option, FAR const void *value, socklen_t value_len); int getsockopt(int sockfd, int level, int option, FAR void *value, FAR socklen_t *value_len); int getsockname(int sockfd, FAR struct sockaddr *addr, FAR socklen_t *addrlen); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __INCLUDE_SYS_SOCKET_H */