/**************************************************************************** * net/sixlowpan/sixlowpan_input.c * 6loWPAN implementation (RFC4944 and draft-ietf-6loWPAN-hc-06) * * Copyright (C) 2017, Gregory Nutt, all rights reserved * Author: Gregory Nutt * * Derives in large part from Contiki: * * Copyright (c) 2008, Swedish Institute of Computer Science. * All rights reserved. * Authors: Adam Dunkels * Nicolas Tsiftes * Niclas Finne * Mathilde Durvy * Julien Abeille * Joakim Eriksson * Joel Hoglund * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #ifdef CONFIG_NET_6LOWPAN_FRAG # include "nuttx/clock.h" #endif #include "nuttx/net/netdev.h" #include "nuttx/net/ip.h" #include "nuttx/net/sixlowpan.h" #ifdef CONFIG_NET_PKT # include "pkt/pkt.h" #endif #include "sixlowpan/sixlowpan_internal.h" #ifdef CONFIG_NET_6LOWPAN /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Success return values from sixlowpan_frame_process */ #define INPUT_PARTIAL 0 /* Frame processed successful, packet incomplete */ #define INPUT_COMPLETE 1 /* Frame processed successful, packet complete */ /* Re-assembly timeout in clock ticks */ #define NET_6LOWPAN_TIMEOUT SEC2TICK(CONFIG_NET_6LOWPAN_MAXAGE) /* This is the size of a buffer large enough to hold the largest uncompressed * HC06 or HC1 headers. */ #ifdef CONFIG_NET_TCP /* The basic TCP header length is TCP_HDRLEN but could include up to 16 * additional 32-bit words of optional data. */ # define UNCOMP_MAXHDR (IPv6_HDRLEN + TCP_HDRLEN + 16*sizeof(uint32_t)) #elif defined(CONFIG_NET_UDP) /* The UDP header length is always 8 bytes */ # define UNCOMP_MAXHDR (IPv6_HDRLEN + TCP_HDRLEN) #elif defined(CONFIG_NET_ICMPv6) /* The ICMPv6 header length is a mere 4 bytes */ # define UNCOMP_MAXHDR (IPv6_HDRLEN + ICMPv6_HDRLEN) #else /* No other header type is handled. */ # define UNCOMP_MAXHDR IPv6_HDRLEN #endif /* Buffer access helpers */ #define IPv6BUF(dev) ((FAR struct ipv6_hdr_s *)((dev)->d_buf)) #define TCPBUF(dev) ((FAR struct tcp_hdr_s *)&(dev)->d_buf[IPv6_HDRLEN]) /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_NET_6LOWPAN_FRAG /* This big buffer could be avoided with a little more effort */ static uint8_t g_bitbucket[UNCOMP_MAXHDR]; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: sixlowpan_recv_hdrlen * * Description: * Get the length of the IEEE802.15.4 FCF header on the received frame. * * Input Parameters: * ieee - The IEEE802.15.4 MAC network driver interface. * iob - The IOB containing the frame. * * Returned Value: * Ok is returned on success; Othewise a negated errno value is returned. * * Assumptions: * Network is locked * ****************************************************************************/ int sixlowpan_recv_hdrlen(FAR const uint8_t *fptr) { uint16_t hdrlen; uint8_t addrmode; /* Minimum header: 2 byte FCF + 1 byte sequence number */ hdrlen = 3; /* Account for destination address size */ addrmode = (fptr[1] & FRAME802154_DSTADDR_MASK) >> FRAME802154_DSTADDR_SHIFT; if (addrmode == FRAME802154_SHORTADDRMODE) { /* 2 byte dest PAN + 2 byte dest short address */ hdrlen += 4; } else if (addrmode == FRAME802154_LONGADDRMODE) { /* 2 byte dest PAN + 6 byte dest long address */ hdrlen += 10; } else if (addrmode != FRAME802154_NOADDR) { nwarn("WARNING: Unrecognized address mode\n"); return -ENOSYS; } else if ((fptr[0] & (1 << FRAME802154_PANIDCOMP_SHIFT)) != 0) { nwarn("WARNING: PAN compression, but no destination address\n"); return -EINVAL; } /* Account for source address size */ addrmode = (fptr[1] & FRAME802154_SRCADDR_MASK) >> FRAME802154_SRCADDR_SHIFT; if (addrmode == FRAME802154_NOADDR) { return hdrlen; } else { if ((fptr[0] & (1 << FRAME802154_PANIDCOMP_SHIFT)) == 0) { hdrlen += 2; } /* Add the length of the source address */ if (addrmode == FRAME802154_SHORTADDRMODE) { return hdrlen + 2; } else if (addrmode == FRAME802154_LONGADDRMODE) { return hdrlen + 8; } } return 0; } /**************************************************************************** * Name: sixlowpan_compress_ipv6hdr * * Description: * IPv6 dispatch "compression" function. Packets "Compression" when only * IPv6 dispatch is used * * There is no compression in this case, all fields are sent * inline. We just add the IPv6 dispatch byte before the packet. * * 0 1 2 3 * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | IPv6 Dsp | IPv6 header and payload ... * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * Input Parameters: * fptr - Pointer to the beginning of the frame under construction * bptr - Output goes here. Normally this is a known offset into d_buf, * may be redirected to g_bitbucket on the case of FRAGN frames. * * Returned Value: * None * ****************************************************************************/ static void sixlowpan_uncompress_ipv6hdr(FAR uint8_t *fptr, FAR uint8_t *bptr) { FAR struct ipv6_hdr_s *ipv6 = (FAR struct ipv6_hdr_s *)bptr; uint16_t protosize; /* Put uncompressed IPv6 header in d_buf. */ g_frame_hdrlen += SIXLOWPAN_IPV6_HDR_LEN; memcpy(ipv6, fptr + g_frame_hdrlen, IPv6_HDRLEN); /* Update g_uncomp_hdrlen and g_frame_hdrlen. */ g_frame_hdrlen += IPv6_HDRLEN; g_uncomp_hdrlen += IPv6_HDRLEN; /* Copy the following protocol header, */ switch (ipv6->proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: { FAR struct tcp_hdr_s *tcp = &((FAR struct ipv6tcp_hdr_s *)ipv6)->tcp; /* The TCP header length is encoded in the top 4 bits of the * tcpoffset field (in units of 32-bit words). */ protosize = ((uint16_t)tcp->tcpoffset >> 4) << 2; } break; #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: protosize = sizeof(struct udp_hdr_s); break; #endif #ifdef CONFIG_NET_ICMPv6 case IP_PROTO_ICMP6: protosize = sizeof(struct icmpv6_hdr_s); break; #endif default: nwarn("WARNING: Unrecognized proto: %u\n", ipv6->proto); return; } /* Copy the protocol header. */ memcpy((FAR uint8_t *)ipv6 + g_uncomp_hdrlen, fptr + g_frame_hdrlen, protosize); g_frame_hdrlen += protosize; g_uncomp_hdrlen += protosize; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: sixlowpan_frame_process * * Description: * Process an incoming 6loWPAN frame in 'iob'. * * If its a FRAG1 or a non-fragmented frame we first uncompress the IP * header. The 6loWPAN payload and possibly the uncompressed IP header * are then copied into d_buf. An indication is returned if the packet * in d_buf is complete (i.e., non-fragmented frame or and the last * FRAGN frame). * * NOTE: We do not check for overlapping sixlowpan fragments (that is a * SHALL in the RFC 4944 and should never happen) * * Input Parameters: * ieee - The IEEE802.15.4 MAC network driver interface. * iob - The IOB containing the frame. * * Returned Value: * Ok is returned on success; Othewise a negated errno value is returned. * * Assumptions: * Network is locked * ****************************************************************************/ static int sixlowpan_frame_process(FAR struct ieee802154_driver_s *ieee, FAR struct iob_s *iob) { FAR uint8_t *fptr; /* Convenience pointer to beginning of the frame */ FAR uint8_t *bptr; /* Used to redirect uncompressed header to the bitbucket */ FAR uint8_t *hc1; /* Convenience pointer to HC1 data */ uint16_t fragsize = 0; /* Size of the IP packet (read from fragment) */ uint16_t paysize; /* Size of the data payload */ uint8_t fragoffset = 0; /* Offset of the fragment in the IP packet */ int reqsize; /* Required buffer size */ int hdrsize; /* Size of the IEEE802.15.4 header */ #ifdef CONFIG_NET_6LOWPAN_FRAG FAR uint8_t *fragptr; /* Pointer to the fragmentation header */ bool isfrag = false; bool isfirstfrag = false; uint16_t fragtag = 0; /* Tag of the fragment */ systime_t elapsed; /* Elapsed time */ #endif /* CONFIG_NET_6LOWPAN_FRAG */ /* Get a pointer to the payload following the IEEE802.15.4 frame header(s). * This size includes both fragmentation and FCF headers. */ fptr = iob->io_data; hdrsize = sixlowpan_recv_hdrlen(fptr); if (hdrsize < 0) { nwarn("Invalid IEEE802.15.2 header: %d\n", hdrsize); return hdrsize; } /* Initialize global data. Locking the network guarantees that we have * exclusive use of the global values for intermediate calculations. */ g_uncomp_hdrlen = 0; g_frame_hdrlen = hdrsize; #ifdef CONFIG_NET_6LOWPAN_FRAG /* Since we don't support the mesh and broadcast header, the first header * we look for is the fragmentation header. NOTE that g_frame_hdrlen * already includes the fragementation header, if presetn. */ fragptr = fptr + hdrsize; switch ((GETINT16(fragptr, RIME_FRAG_DISPATCH_SIZE) & 0xf800) >> 8) { /* First fragment of new reassembly */ case SIXLOWPAN_DISPATCH_FRAG1: { /* Set up for the reassembly */ fragsize = GETINT16(fragptr, RIME_FRAG_DISPATCH_SIZE) & 0x07ff; fragtag = GETINT16(fragptr, RIME_FRAG_TAG); g_frame_hdrlen += SIXLOWPAN_FRAG1_HDR_LEN; ninfo("FRAG1: fragsize=%d fragtag=%d fragoffset=%d\n", fragsize, fragtag, fragoffset); /* Indicate the first fragment of the reassembly */ isfirstfrag = true; isfrag = true; } break; case SIXLOWPAN_DISPATCH_FRAGN: { /* Set offset, tag, size. Offset is in units of 8 bytes. */ fragoffset = fragptr[RIME_FRAG_OFFSET]; fragtag = GETINT16(fragptr, RIME_FRAG_TAG); fragsize = GETINT16(fragptr, RIME_FRAG_DISPATCH_SIZE) & 0x07ff; g_frame_hdrlen += SIXLOWPAN_FRAGN_HDR_LEN; ninfo("FRAGN: fragsize=%d fragtag=%d fragoffset=%d\n", fragsize, fragtag, fragoffset); ninfo("FRAGN: i_accumlen=%d paysize=%u fragsize=%u\n", ieee->i_accumlen, iob->io_len - g_frame_hdrlen, fragsize); /* Indicate that this frame is a another fragment for reassembly */ isfrag = true; } break; /* Not a fragment */ default: break; } /* Check if we are currently reassembling a packet */ bptr = ieee->i_dev.d_buf; if (ieee->i_accumlen > 0) { /* If reassembly timed out, cancel it */ elapsed = clock_systimer() - ieee->i_time; if (elapsed > NET_6LOWPAN_TIMEOUT) { nwarn("WARNING: Reassembly timed out\n"); ieee->i_pktlen = 0; ieee->i_accumlen = 0; } /* In this case what we expect is that the next frame will hold the * next FRAGN of the sequence. We have to handle a few exeptional * cases that we need to handle: * * 1. If we are currently reassembling a packet, but have just received * the first fragment of another packet. We can either ignore it and * hope to receive the rest of the under-reassembly packet fragments, * or we can discard the previous packet altogether, and start * reassembling the new packet. Here we discard the previous packet, * and start reassembling the new packet. * 2. The new frame is not a fragment. We should be able to handle this * case, but we cannot because that would require two packet buffers. * It could be handled with a more extensive design. * 3. The fragment came from a different sender. What would this mean? * */ else if (!isfrag) { /* Discard the partially assembled packet */ nwarn("WARNING: Non-fragment frame received during reassembly\n"); ieee->i_pktlen = 0; ieee->i_accumlen = 0; } /* It is a fragment of some kind. Drop any zero length fragments */ else if (fragsize == 0) { nwarn("WARNING: Dropping zero-length 6loWPAN fragment\n"); return INPUT_PARTIAL; } /* A non-zero, first fragement received while we are in the middle of * rassembly. Discard the partially assembled packet and start over. */ else if (isfirstfrag) { nwarn("WARNING: First fragment frame received during reassembly\n"); ieee->i_pktlen = 0; ieee->i_accumlen = 0; } /* Verify that this fragment is part of that reassembly sequence */ else if (fragsize != ieee->i_pktlen || ieee->i_reasstag != fragtag || !rimeaddr_cmp(&ieee->i_fragsrc, &g_pktaddrs[PACKETBUF_ADDR_SENDER])) { /* The packet is a fragment that does not belong to the packet * being reassembled or the packet is not a fragment. */ nwarn("WARNING: Dropping 6loWPAN packet that is not a fragment of " "the packet currently being reassembled\n"); return INPUT_PARTIAL; } else { /* Looks good. We are currently processing a reassembling sequence * and we recieved a valid FRAGN fragment. Redirect the header * uncompression to our bitbucket. */ bptr = g_bitbucket; } } /* There is no reassembly in progress. Check if we received a fragment */ else if (isfrag) { /* Another case that we have to handle is if a FRAGN fragment of a * reassembly is received, but we are not currently reassembling a * packet. I think we have no choice but to drop the packet in this * case. */ if (!isfirstfrag) { nwarn("WARNING: FRAGN 6loWPAN fragment while not reassembling\n"); return OK; } /* Drop the packet if it cannot fit into the d_buf */ if (fragsize > CONFIG_NET_6LOWPAN_MTU) { nwarn("WARNING: Reassembled packet size exeeds CONFIG_NET_6LOWPAN_MTU\n"); return OK; } ieee->i_pktlen = fragsize; ieee->i_reasstag = fragtag; ieee->i_time = clock_systimer(); ninfo("Starting reassembly: i_pktlen %u, i_reasstag %d\n", ieee->i_pktlen, ieee->i_reasstag); rimeaddr_copy(&ieee->i_fragsrc, &g_pktaddrs[PACKETBUF_ADDR_SENDER]); } #endif /* CONFIG_NET_6LOWPAN_FRAG */ /* Process next dispatch and headers */ hc1 = fptr + g_frame_hdrlen; #ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC06 if ((hc1[RIME_HC1_DISPATCH] & SIXLOWPAN_DISPATCH_IPHC_MASK) == SIXLOWPAN_DISPATCH_IPHC) { ninfo("IPHC Dispatch\n"); sixlowpan_uncompresshdr_hc06(fragsize, iob, fptr, bptr); } else #endif /* CONFIG_NET_6LOWPAN_COMPRESSION_HC06 */ #ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC1 if (hc1[RIME_HC1_DISPATCH] == SIXLOWPAN_DISPATCH_HC1) { ninfo("HC1 Dispatch\n"); sixlowpan_uncompresshdr_hc1(fragsize, iob, fptr, bptr); } else #endif /* CONFIG_NET_6LOWPAN_COMPRESSION_HC1 */ if (hc1[RIME_HC1_DISPATCH] == SIXLOWPAN_DISPATCH_IPV6) { ninfo("IPv6 Dispatch\n"); sixlowpan_uncompress_ipv6hdr(fptr, bptr); } else { /* Unknown or unsupported header */ nwarn("WARNING: Unknown dispatch: %u\n", hc1[RIME_HC1_DISPATCH]); return OK; } #ifdef CONFIG_NET_6LOWPAN_FRAG /* Is this the first fragment is a sequence? */ if (isfirstfrag) { /* Yes.. Remember the offset from the beginning of d_buf where we * begin placing the data payload. */ ieee->i_boffset = g_uncomp_hdrlen; } /* No.. is this a subsequent fragment in the same sequence? */ else if (isfrag) { /* Yes, recover the offset from the beginning of the d_buf where * we began placing payload data. */ g_uncomp_hdrlen = ieee->i_boffset; } #endif /* CONFIG_NET_6LOWPAN_FRAG */ /* Copy "payload" from the rime buffer to the IEEE802.15.4 MAC driver's * d_buf. If this frame is a first fragment or not part of a fragmented * packet, we have already copied the compressed headers, g_uncomp_hdrlen * and g_frame_hdrlen are non-zerio, fragoffset is. */ paysize = iob->io_len - g_frame_hdrlen; if (paysize > CONFIG_NET_6LOWPAN_MTU) { nwarn("WARNING: Packet dropped due to payload (%u) > packet buffer (%u)\n", paysize, CONFIG_NET_6LOWPAN_MTU); return OK; } /* Sanity-check size of incoming packet to avoid buffer overflow */ reqsize = g_uncomp_hdrlen + (fragoffset << 3) + paysize; if (reqsize > CONFIG_NET_6LOWPAN_MTU) { nwarn("WARNING: Required buffer size: %u+%u+%u=%u Available=%u\n", g_uncomp_hdrlen, (fragoffset << 3), paysize, reqsize, CONFIG_NET_6LOWPAN_MTU); return -ENOMEM; } memcpy(ieee->i_dev.d_buf + g_uncomp_hdrlen + (fragoffset << 3), fptr + g_frame_hdrlen, paysize); #ifdef CONFIG_NET_6LOWPAN_FRAG /* Update ieee->i_accumlen if the frame is a fragment, ieee->i_pktlen * otherwise. */ if (isfrag) { /* Check if it is the last fragment to be processed. * * If this is the last fragment, we may shave off any extrenous * bytes at the end. We must be liberal in what we accept. */ ieee->i_accumlen = g_uncomp_hdrlen + (fragoffset << 3) + paysize; } else { ieee->i_pktlen = paysize + g_uncomp_hdrlen; } /* If we have a full IP packet in sixlowpan_buf, deliver it to * the IP stack */ ninfo("i_accumlen=%d i_pktlen=%d paysize=%d\n", ieee->i_accumlen, ieee->i_pktlen, paysize); if (ieee->i_accumlen == 0 || ieee->i_accumlen >= ieee->i_pktlen) { ninfo("IP packet ready (length %d)\n", ieee->i_pktlen); ieee->i_dev.d_len = ieee->i_pktlen; ieee->i_pktlen = 0; ieee->i_accumlen = 0; return INPUT_COMPLETE; } return INPUT_PARTIAL; #else /* Deliver the packet to the IP stack */ ieee->i_dev.d_len = paysize + g_uncomp_hdrlen; return INPUT_COMPLETE; #endif /* CONFIG_NET_6LOWPAN_FRAG */ } /**************************************************************************** * Function: sixlowpan_dispatch * * Description: * Inject the packet in d_buf into the network for normal packet processing. * * Parameters: * ieee - The IEEE802.15.4 MAC network driver interface. * * Returned Value: * None * ****************************************************************************/ static int sixlowpan_dispatch(FAR struct ieee802154_driver_s *ieee) { sixlowpan_dumpbuffer("Incoming packet", (FAR const uint8_t *)IPv6BUF(&ieee->i_dev), ieee->i_dev.d_len); #ifdef CONFIG_NET_PKT /* When packet sockets are enabled, feed the frame into the packet tap */ ninfo("Packet tap\n"); pkt_input(&ieee->i_dev); #endif /* We only accept IPv6 packets. */ ninfo("Iv6 packet dispatch\n"); NETDEV_RXIPV6(&ieee->i_dev); /* Give the IPv6 packet to the network layer. NOTE: If there is a * problem with IPv6 header, it will be silently dropped and d_len will * be set to zero. Oddly, ipv6_input() will return OK in this case. */ return ipv6_input(&ieee->i_dev); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: sixlowpan_input * * Description: * Process an incoming 6loWPAN frame. * * This function is called when the device driver has received a 6loWPAN * frame from the network. The frame from the device driver must be * provided in a IOB present in the i_framelist: The frame data is in the * IOB io_data[] buffer and the length of the frame is in the IOB io_len * field. Only a single IOB is expected in the i_framelist. This incoming * data will be processed one frame at a time. * * An non-NULL d_buf of size CONFIG_NET_6LOWPAN_MTU must also be provided. * The frame will be decompressed and placed in the d_buf. Fragmented * packets will also be reassembled in the d_buf as they are received * (meaning for the driver, that two packet buffers are required: One for * reassembly of RX packets and one used for TX polling). * * After each frame is processed into d_buf, the IOB is removed and * deallocated. i_framelist will be nullified. If reassembly is * incomplete, this function will return to called with i_framelist * equal to NULL. The partially reassembled packet must be preserved by * the IEEE802.15.4 MAC and provided again when the next frame is * received. * * When the packet in the d_buf is fully reassembled, it will be provided * to the network as with any other received packet. d_len will be set * the the length of the uncompressed, reassembled packet. * * After the network processes the packet, d_len will be set to zero. * Network logic may also decide to send a response to the packet. In * that case, the outgoing network packet will be placed in d_buf the * d_buf and d_len will be set to a non-zero value. That case is handled * by this function. * * If that case occurs, the packet will be converted to a list of * compressed and possibly fragmented frames in i_framelist as with other * TX operations. * * So from the standpoint of the IEEE802.15.4 MAC driver, there are two * possible results: (1) i_framelist is NULL meaning that the frame * was fully processed and freed, or (2) i_framelist is non-NULL meaning * that there are outgoing frame(s) to be sent. * * Input Parameters: * ieee - The IEEE802.15.4 MAC network driver interface. * * Returned Value: * Ok is returned on success; Othewise a negated errno value is returned. * ****************************************************************************/ int sixlowpan_input(FAR struct ieee802154_driver_s *ieee) { int ret = -EINVAL; DEBUGASSERT(ieee != NULL && !FRAME_IOB_EMPTY(ieee)); /* Verify that an IOB is provided in the device structure */ while (!FRAME_IOB_EMPTY(ieee)) { FAR struct iob_s *iob; /* Remove the IOB containing the frame from the device structure */ FRAME_IOB_REMOVE(ieee, iob); DEBUGASSERT(iob != NULL); sixlowpan_dumpbuffer("Incoming frame", iob->io_data, iob->io_len); /* Process the frame, decompressing it into the packet buffer */ ret = sixlowpan_frame_process(ieee, iob); /* Free the IOB the held the consumed frame */ iob_free(iob); /* Was the frame successfully processed? Is the packet in d_buf fully * reassembled? */ if (ret == INPUT_COMPLETE) { /* Inject the uncompressed, reassembled packet into the network */ ret = sixlowpan_dispatch(ieee); if (ret >= 0) { /* Check if this resulted in a request to send an outgoing * packet. */ if (ieee->i_dev.d_len > 0) { FAR struct ipv6_hdr_s *ipv6hdr; FAR uint8_t *buffer; struct rimeaddr_s destmac; size_t hdrlen; size_t buflen; /* The IPv6 header followed by TCP or UDP headers should * lie at the beginning of d_buf since there is no link * layer protocol header. */ ipv6hdr = IPv6BUF(&ieee->i_dev); /* Get the Rime MAC address of the destination. This * assumes an encoding of the MAC address in the IPv6 * address. */ sixlowpan_rimefromip(ipv6hdr->destipaddr, &destmac); /* The data payload should follow the IPv6 header plus * the protocol header. */ if (ipv6hdr->proto != IP_PROTO_TCP) { FAR struct tcp_hdr_s *tcp = TCPBUF(&ieee->i_dev); uint16_t tcplen; /* The TCP header length is encoded in the top 4 bits * of the tcpoffset field (in units of 32-bit words). */ tcplen = ((uint16_t)tcp->tcpoffset >> 4) << 2; hdrlen = IPv6_HDRLEN + tcplen; } else if (ipv6hdr->proto != IP_PROTO_UDP) { hdrlen = IPv6_HDRLEN + UDP_HDRLEN; } else if (ipv6hdr->proto != IP_PROTO_ICMP6) { hdrlen = IPv6_HDRLEN + ICMPv6_HDRLEN; } else { nwarn("WARNING: Unsupported protoype: %u\n", ipv6hdr->proto); ret = -EPROTO; goto drop; } if (hdrlen < ieee->i_dev.d_len) { nwarn("WARNING: Packet to small: Have %u need >%u\n", ieee->i_dev.d_len, hdrlen); ret = -ENOBUFS; goto drop; } /* Convert the outgoing packet into a frame list. */ buffer = ieee->i_dev.d_buf + hdrlen; buflen = ieee->i_dev.d_len - hdrlen; ret = sixlowpan_queue_frames(ieee, ipv6hdr, buffer, buflen, &destmac); drop: ieee->i_dev.d_len = 0; } } } } return ret; } #endif /* CONFIG_NET_6LOWPAN */