/**************************************************************************** * sched/signal/sig_dispatch.c * * Copyright (C) 2007, 2009, 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "sched/sched.h" #include "group/group.h" #include "semaphore/semaphore.h" #include "signal/signal.h" #include "mqueue/mqueue.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Type Declarations ****************************************************************************/ /**************************************************************************** * Public Data ****************************************************************************/ /**************************************************************************** * Private Variables ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: sig_queueaction * * Description: * Queue a signal action for delivery to a task. * * Returned Value: * Returns 0 (OK) on success or a negated errno value on failure. * ****************************************************************************/ static int sig_queueaction(FAR struct tcb_s *stcb, siginfo_t *info) { FAR sigactq_t *sigact; FAR sigq_t *sigq; irqstate_t saved_state; int ret = OK; sched_lock(); /* Find the sigaction associated with this signal */ sigact = sig_findaction(stcb, info->si_signo); /* Check if a valid signal handler is available and if the signal is * unblocked. NOTE: There is no default action. */ if ((sigact) && (sigact->act.sa_u._sa_sigaction)) { /* Allocate a new element for the signal queue. NOTE: * sig_allocatependingsigaction will force a system crash if it is * unable to allocate memory for the signal data */ sigq = sig_allocatependingsigaction(); if (!sigq) { ret = -ENOMEM; } else { /* Populate the new signal queue element */ sigq->action.sighandler = sigact->act.sa_u._sa_sigaction; sigq->mask = sigact->act.sa_mask; memcpy(&sigq->info, info, sizeof(siginfo_t)); /* Put it at the end of the pending signals list */ saved_state = irqsave(); sq_addlast((FAR sq_entry_t *)sigq, &(stcb->sigpendactionq)); irqrestore(saved_state); } } sched_unlock(); return ret; } /**************************************************************************** * Name: sig_allocatependingsignal * * Description: * Allocate a pending signal list entry * ****************************************************************************/ static FAR sigpendq_t *sig_allocatependingsignal(void) { FAR sigpendq_t *sigpend; irqstate_t saved_state; /* Check if we were called from an interrupt handler. */ if (up_interrupt_context()) { /* Try to get the pending signal structure from the free list */ sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingsignal); if (!sigpend) { /* If no pending signal structure is available in the free list, * then try the special list of structures reserved for * interrupt handlers */ sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingirqsignal); } } /* If we were not called from an interrupt handler, then we are * free to allocate pending action structures if necessary. */ else { /* Try to get the pending signal structure from the free list */ saved_state = irqsave(); sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingsignal); irqrestore(saved_state); /* Check if we got one. */ if (!sigpend) { /* No... Allocate the pending signal */ if (!sigpend) { sigpend = (FAR sigpendq_t *)kmm_malloc((sizeof (sigpendq_t))); } /* Check if we got an allocated message */ if (sigpend) { sigpend->type = SIG_ALLOC_DYN; } } } return sigpend; } /**************************************************************************** * Name: sig_findpendingsignal * * Description: * Find a specified element in the pending signal list * ****************************************************************************/ static FAR sigpendq_t *sig_findpendingsignal(FAR struct task_group_s *group, int signo) { FAR sigpendq_t *sigpend = NULL; irqstate_t saved_state; DEBUGASSERT(group); /* Pending sigals can be added from interrupt level. */ saved_state = irqsave(); /* Seach the list for a sigpendion on this signal */ for (sigpend = (FAR sigpendq_t *)group->sigpendingq.head; (sigpend && sigpend->info.si_signo != signo); sigpend = sigpend->flink); irqrestore(saved_state); return sigpend; } /**************************************************************************** * Name: sig_addpendingsignal * * Description: * Add the specified signal to the signal pending list. NOTE: This * function will queue only one entry for each pending signal. This * was done intentionally so that a run-away sender cannot consume * all of memory. * ****************************************************************************/ static FAR sigpendq_t *sig_addpendingsignal(FAR struct tcb_s *stcb, FAR siginfo_t *info) { FAR struct task_group_s *group = stcb->group; FAR sigpendq_t *sigpend; irqstate_t saved_state; DEBUGASSERT(group); /* Check if the signal is already pending */ sigpend = sig_findpendingsignal(group, info->si_signo); if (sigpend) { /* The signal is already pending... retain only one copy */ memcpy(&sigpend->info, info, sizeof(siginfo_t)); } /* No... There is nothing pending for this signo */ else { /* Allocate a new pending signal entry */ sigpend = sig_allocatependingsignal(); if (sigpend) { /* Put the signal information into the allocated structure */ memcpy(&sigpend->info, info, sizeof(siginfo_t)); /* Add the structure to the pending signal list */ saved_state = irqsave(); sq_addlast((FAR sq_entry_t *)sigpend, &group->sigpendingq); irqrestore(saved_state); } } return sigpend; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: sig_tcbdispatch * * Description: * All signals received the task (whatever the source) go through this * function to be processed. This function is responsible for: * * - Determining if the signal is blocked. * - Queuing and dispatching signal actions * - Unblocking tasks that are waiting for signals * - Queuing pending signals. * * This function will deliver the signal to the task associated with * the specified TCB. This function should *not* typically be used * to dispatch signals since it will *not* follow the group signal * deliver algorithms. * * Returned Value: * Returns 0 (OK) on success or a negated errno value on failure. * ****************************************************************************/ int sig_tcbdispatch(FAR struct tcb_s *stcb, siginfo_t *info) { irqstate_t saved_state; int ret = OK; sdbg("TCB=0x%08x signo=%d code=%d value=%d mask=%08x\n", stcb, info->si_signo, info->si_code, info->si_value.sival_int, stcb->sigprocmask); DEBUGASSERT(stcb && info); /************************* MASKED SIGNAL HANDLING ************************/ /* Check if the signal is masked -- if it is, it will be added to the list * of pending signals. */ if (sigismember(&stcb->sigprocmask, info->si_signo)) { /* Check if the task is waiting for this pending signal. If so, then unblock it. * This must be performed in a critical section because signals can be queued * from the interrupt level. */ saved_state = irqsave(); if (stcb->task_state == TSTATE_WAIT_SIG && sigismember(&stcb->sigwaitmask, info->si_signo)) { memcpy(&stcb->sigunbinfo, info, sizeof(siginfo_t)); stcb->sigwaitmask = NULL_SIGNAL_SET; up_unblock_task(stcb); irqrestore(saved_state); } /* Its not one we are waiting for... Add it to the list of pending * signals. */ else { irqrestore(saved_state); ASSERT(sig_addpendingsignal(stcb, info)); } } /************************ UNMASKED SIGNAL HANDLING ***********************/ else { /* Queue any sigaction's requested by this task. */ ret = sig_queueaction(stcb, info); /* Then schedule execution of the signal handling action on the * recipient's thread. */ up_schedule_sigaction(stcb, sig_deliver); /* Check if the task is waiting for an unmasked signal. If so, then * unblock it. This must be performed in a critical section because * signals can be queued from the interrupt level. */ saved_state = irqsave(); if (stcb->task_state == TSTATE_WAIT_SIG) { memcpy(&stcb->sigunbinfo, info, sizeof(siginfo_t)); stcb->sigwaitmask = NULL_SIGNAL_SET; up_unblock_task(stcb); } irqrestore(saved_state); /* If the task neither was waiting for the signal nor had a signal * handler attached to the signal, then the default action is * simply to ignore the signal */ /*********************** OTHER SIGNAL HANDLING ***********************/ /* If the task is blocked waiting for a semaphore, then that task must * be unblocked when a signal is received. */ if (stcb->task_state == TSTATE_WAIT_SEM) { sem_waitirq(stcb, EINTR); } /* If the task is blocked waiting on a message queue, then that task * must be unblocked when a signal is received. */ #ifndef CONFIG_DISABLE_MQUEUE if (stcb->task_state == TSTATE_WAIT_MQNOTEMPTY || stcb->task_state == TSTATE_WAIT_MQNOTFULL) { mq_waitirq(stcb, EINTR); } #endif } return ret; } /**************************************************************************** * Name: sig_dispatch * * Description: * This is the front-end for sig_tcbdispatch that should be typically * be used to dispatch a signal. If HAVE_GROUP_MEMBERS is defined, * then function will follow the group signal delivery algorthrims: * * This front-end does the following things before calling * sig_tcbdispatch. * * With HAVE_GROUP_MEMBERS defined: * - Get the TCB associated with the pid. * - If the TCB was found, get the group from the TCB. * - If the PID has already exited, lookup the group that that was * started by this task. * - Use the group to pick the TCB to receive the signal * - Call sig_tcbdispatch with the TCB * * With HAVE_GROUP_MEMBERS *not* defined * - Get the TCB associated with the pid. * - Call sig_tcbdispatch with the TCB * * Returned Value: * Returns 0 (OK) on success or a negated errno value on failure. * ****************************************************************************/ int sig_dispatch(pid_t pid, FAR siginfo_t *info) { #ifdef HAVE_GROUP_MEMBERS FAR struct tcb_s *stcb; FAR struct task_group_s *group; /* Get the TCB associated with the pid */ stcb = sched_gettcb(pid); if (stcb) { /* The task/thread associated with this PID is still active. Get its * task group. */ group = stcb->group; } else { /* The task/thread associated with this PID has exited. In the normal * usage model, the PID should correspond to the PID of the task that * created the task group. Try looking it up. */ group = group_findbypid(pid); } /* Did we locate the group? */ if (group) { /* Yes.. call group_signal() to send the signal to the correct group * member. */ return group_signal(group, info); } else { return -ESRCH; } #else FAR struct tcb_s *stcb; /* Get the TCB associated with the pid */ stcb = sched_gettcb(pid); if (!stcb) { return -ESRCH; } return sig_tcbdispatch(stcb, info); #endif }