/************************************************************************************
* configs/stm32f746g-disco/include/board.h
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H
#define __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#ifdef CONFIG_STM32F7_SDMMC1
# include "stm32_sdmmc.h"
#endif
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The STM32F7 Discovery board provides the following clock sources:
*
* X1: 24 MHz oscillator for USB OTG HS PHY and camera module (daughter board)
* X2: 25 MHz oscillator for STM32F746NGH6 microcontroller and Ethernet PHY.
* X3: 32.768 KHz crystal for STM32F746NGH6 embedded RTC
*
* So we have these clock source available within the STM32
*
* HSI: 16 MHz RC factory-trimmed
* LSI: 32 KHz RC
* HSE: On-board crystal frequency is 25MHz
* LSE: 32.768 kHz
*/
#define STM32_BOARD_XTAL 25000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE = 25,000,000
*
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* Subject to:
*
* 2 <= PLLM <= 63
* 192 <= PLLN <= 432
* 192 MHz <= PLL_VCO <= 432MHz
*
* SYSCLK = PLL_VCO / PLLP
* Subject to
*
* PLLP = {2, 4, 6, 8}
* SYSCLK <= 216 MHz
*
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
* Subject to
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
* and the random number generator need a frequency lower than or equal
* to 48 MHz to work correctly.
*
* 2 <= PLLQ <= 15
*/
#if defined(CONFIG_STM32F7_USBOTHFS)
/* Highest SYSCLK with USB OTG FS clock = 48 MHz
*
* PLL_VCO = (25,000,000 / 25) * 384 = 384 MHz
* SYSCLK = 384 MHz / 2 = 192 MHz
* USB OTG FS, SDMMC and RNG Clock = 384 MHz / 8 = 48MHz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(384)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(8)
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 384)
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 8)
#elif defined(CONFIG_STM32F7_SDMMC1) || defined(CONFIG_STM32F7_RNG)
/* Highest SYSCLK with USB OTG FS clock <= 48MHz
*
* PLL_VCO = (25,000,000 / 25) * 432 = 432 MHz
* SYSCLK = 432 MHz / 2 = 216 MHz
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 10 = 43.2 MHz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(10)
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 432)
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 10)
#else
/* Highest SYSCLK
*
* PLL_VCO = (25,000,000 / 25) * 432 = 432 MHz
* SYSCLK = 432 MHz / 2 = 216 MHz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(10)
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 432)
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 10)
#endif
/* Several prescalers allow the configuration of the two AHB buses, the
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
* the low-speed APB domain is 54 MHz.
*/
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* FLASH wait states
*
* --------- ---------- -----------
* VDD MAX SYSCLK WAIT STATES
* --------- ---------- -----------
* 1.7-2.1 V 180 MHz 8
* 2.1-2.4 V 216 MHz 9
* 2.4-2.7 V 216 MHz 8
* 2.7-3.6 V 216 MHz 7
* --------- ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 7
/* LED definitions ******************************************************************/
/* The STM32F746G-DISCO board has numerous LEDs but only one, LD1 located near the
* reset button, that can be controlled by software (LD2 is a power indicator, LD3-6
* indicate USB status, LD7 is controlled by the ST-Link).
*
* LD1 is controlled by PI1 which is also the SPI2_SCK at the Arduino interface.
* One end of LD1 is grounded so a high output on PI1 will illuminate the LED.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_NLEDS 1
#define BOARD_LD1 BOARD_LED1
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
* events as follows:
*
* SYMBOL Meaning LD1
* ------------------- ----------------------- ------
* LED_STARTED NuttX has been started OFF
* LED_HEAPALLOCATE Heap has been allocated OFF
* LED_IRQSENABLED Interrupts enabled OFF
* LED_STACKCREATED Idle stack created ON
* LED_INIRQ In an interrupt N/C
* LED_SIGNAL In a signal handler N/C
* LED_ASSERTION An assertion failed N/C
* LED_PANIC The system has crashed FLASH
*
* Thus is LD1 is statically on, NuttX has successfully booted and is,
* apparently, running normally. If LD1 is flashing at approximately
* 2Hz, then a fatal error has been detected and the system has halted.
*/
#define LED_STARTED 0 /* LD1=OFF */
#define LED_HEAPALLOCATE 0 /* LD1=OFF */
#define LED_IRQSENABLED 0 /* LD1=OFF */
#define LED_STACKCREATED 1 /* LD1=ON */
#define LED_INIRQ 2 /* LD1=no change */
#define LED_SIGNAL 2 /* LD1=no change */
#define LED_ASSERTION 2 /* LD1=no change */
#define LED_PANIC 3 /* LD1=flashing */
/* Button definitions ***************************************************************/
/* The STM32F7 Discovery supports one button: Pushbutton B1, labelled "User", is
* connected to GPIO PI11. A high value will be sensed when the button is depressed.
*/
#define BUTTON_USER 0
#define NUM_BUTTONS 1
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Alternate function pin selections ************************************************/
/* USART6:
*
* These configurations assume that you are using a standard Arduio RS-232 shield
* with the serial interface with RX on pin D0 and TX on pin D1:
*
* -------- ---------------
* STM32F7
* ARDUIONO FUNCTION GPIO
* -- ----- --------- -----
* DO RX USART6_RX PC7
* D1 TX USART6_TX PC6
* -- ----- --------- -----
*/
#define GPIO_USART6_RX GPIO_USART6_RX_1
#define GPIO_USART6_TX GPIO_USART6_TX_1
/* The STM32 F7 connects to a SMSC LAN8742A PHY using these pins:
*
* STM32 F7 BOARD LAN8742A
* GPIO SIGNAL PIN NAME
* -------- ------------ -------------
* PG11 RMII_TX_EN TXEN
* PG13 RMII_TXD0 TXD0
* PG14 RMII_TXD1 TXD1
* PC4 RMII_RXD0 RXD0/MODE0
* PC5 RMII_RXD1 RXD1/MODE1
* PG2 RMII_RXER RXER/PHYAD0 -- Not used
* PA7 RMII_CRS_DV CRS_DV/MODE2
* PC1 RMII_MDC MDC
* PA2 RMII_MDIO MDIO
* N/A NRST nRST
* PA1 RMII_REF_CLK nINT/REFCLK0
* N/A OSC_25M XTAL1/CLKIN
*
* The PHY address is either 0 or 1, depending on the state of PG2 on reset.
* PG2 is not controlled but appears to result in a PHY address of 0.
*/
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H */