# # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # if ARCH_BOARD_STM32F429I_DISCO config STM32F429I_DISCO_FLASH bool "MTD driver for external 8Mbyte SST25 FLASH on SPI4" default n select MTD select MTD_SST25XX select MTD_SMART select FS_SMARTFS select STM32_SPI4 select MTD_BYTE_WRITE ---help--- Configures an MTD device for use with the onboard flash config STM32F429I_DISCO_FLASH_MINOR int "Minor number for the FLASH /dev/smart entry" default 0 depends on STM32F429I_DISCO_FLASH ---help--- Sets the minor number for the FLASH MTD /dev entry config STM32F429I_DISCO_FLASH_PART bool "Enable partition support on FLASH" default n depends on STM32F429I_DISCO_FLASH ---help--- Enables creation of partitions on the FLASH config STM32F429I_DISCO_FLASH_CONFIG_PART bool "Create application config data partition on FLASH" default y depends on STM32F429I_DISCO_FLASH_PART depends on PLATFORM_CONFIGDATA ---help--- Enables creation of a /dev/config partition on the FLASH config STM32F429I_DISCO_FLASH_CONFIG_PART_NUMBER int "Index number of config partition (in list below)" default 0 depends on STM32F429I_DISCO_FLASH_CONFIG_PART ---help--- Specifies the index number of the config data partition from the partition list. config STM32F429I_DISCO_FLASH_PART_LIST string "Flash partition size list" default "4,8188" depends on STM32F429I_DISCO_FLASH_PART ---help--- Comma separated list of partition sizes in KB. config STM32F429I_DISCO_FLASH_PART_NAMES string "Flash partition name list" default "config,rfs" depends on STM32F429I_DISCO_FLASH_PART depends on MTD_PARTITION_NAMES ---help--- Comma separated list of partition names. config STM32F429I_DISCO_RAMMTD bool "MTD driver for SMARTFS RAM disk" default n select MTD select RAMMTD ---help--- Configures an MTD based RAM device for use with SMARTFS. config STM32F429I_DISCO_RAMMTD_MINOR int "Minor number for RAM /dev/smart entry" default 1 depends on STM32F429I_DISCO_RAMMTD ---help--- Sets the minor number for the RAM MTD /dev entry config STM32F429I_DISCO_RAMMTD_SIZE int "Size in KB of the RAM device to create" default 32 depends on STM32F429I_DISCO_RAMMTD ---help--- Sets the size of static RAM allocation for the SMART RAM device config PM_BUTTONS bool "PM Button support" default n depends on PM && ARCH_IRQBUTTONS ---help--- Enable PM button EXTI interrupts to support PM testing config PM_BUTTON_ACTIVITY int "Button PM activity weight" default 10 depends on PM_BUTTONS ---help--- The activity weight to report to the power management subsystem when a button is pressed. config PM_ALARM_SEC int "PM_STANDBY delay (seconds)" default 15 depends on PM && RTC_ALARM ---help--- Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode. config PM_ALARM_NSEC int "PM_STANDBY delay (nanoseconds)" default 0 depends on PM && RTC_ALARM ---help--- Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode. config PM_SLEEP_WAKEUP bool "PM_SLEEP wake-up alarm" default n depends on PM && RTC_ALARM ---help--- Wake-up of PM_SLEEP mode after a delay and resume normal operation. config PM_SLEEP_WAKEUP_SEC int "PM_SLEEP delay (seconds)" default 10 depends on PM && RTC_ALARM ---help--- Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode. config PM_SLEEP_WAKEUP_NSEC int "PM_SLEEP delay (nanoseconds)" default 0 depends on PM && RTC_ALARM ---help--- Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode. menuconfig STM32F429I_DISCO_ILI9341 bool "LCD driver for ILI9341 Liquid Crystal Display Controller" default n ---help--- Enables support for a connected display based on ili9341 LCD Single Chip Driver. This sub driver supports only communication with the display driver connected via 4-wire serial (spi) mcu interface. if STM32F429I_DISCO_ILI9341 choice prompt "LCD Interface Type" default STM32F429I_DISCO_ILI9341_NONE if !LCD_ILI9341 && !STM32_LTDC default STM32F429I_DISCO_ILI9341_LCDIFACE if LCD_ILI9341 && !STM32_LTDC default STM32F429I_DISCO_ILI9341_FBIFACE if STM32_LTDC config STM32F429I_DISCO_ILI9341_NONE bool "No LCD interface" config STM32F429I_DISCO_ILI9341_LCDIFACE bool "Enable support for nuttx LCD interface" depends on LCD_ILI9341 ---help--- Enable lcd driver support for the nuttx lcd interface. config STM32F429I_DISCO_ILI9341_FBIFACE bool "Enable support for nuttx framebuffer interface" depends on STM32_LTDC ---help--- Enable lcd driver support for the nuttx framebuffer interface to displaying data via ltdc controller of the stm32f429i mcu. endchoice # LCD Interface Type if STM32F429I_DISCO_ILI9341_LCDIFACE config STM32F429I_DISCO_ILI9341_LCDDEVICE int "LCD interface" default 0 range 0 1 depends on STM32F429I_DISCO_ILI9341_LCDIFACE ---help--- Define the lcd interface which should be used. This must be corresponding to the configured ili9341 LCD device in the driver section. config STM32F429I_DISCO_ILI9341_SPIFREQUENCY int "SPI frequency" default 12000000 ---help--- Define the bus frequency of the SPI device. config STM32F429I_DISCO_ILI9341_SPIBITS16 bool "Enable 16 bit pixel read/write" default n ---help--- This enables faster 16-bit SPI mode for transmitting or receiving pixel data to or from the display gram. But uses default 8-bit SPI mode for all other display operations. endif # STM32F429I_DISCO_ILI9341_LCDIFACE if STM32F429I_DISCO_ILI9341_FBIFACE choice prompt "LCD Orientation" default STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT ---help--- Configure display orientation. config STM32F429I_DISCO_ILI9341_FBIFACE_LANDSCAPE bool "Landscape orientation" ---help--- Define for "landscape" orientation support. config STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT bool "Portrait orientation" ---help--- Define for "portrait" orientation support. config STM32F429I_DISCO_ILI9341_FBIFACE_RLANDSCAPE bool "Reverse landscape orientation" ---help--- Define for "reverse landscape" orientation support. config STM32F429I_DISCO_ILI9341_FBIFACE_RORTRAIT bool "Reverse portrait display" ---help--- Define for "reverse portrait" orientation support. endchoice endif # STM32F429I_DISCO_ILI9341_FBIFACE endif # STM32F429I_DISCO_ILI9341 endif # ARCH_BOARD_STM32F429I_DISCO