README ====== This README discusses issues unique to NuttX configurations for the ST NucleoF401RE board from ST Micro (http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1577/LN1810/PF258797) Microprocessor: 32-bit ARM Cortex M4 at 84MHz STM32F104RE Memory: 512 KB Flash and 96 KB SRAM I/O Pins Out: 37, 17 On the Connector Network: TI CC3000 Wifi Module ADCs: 1 (at 12-bit resolution) Peripherals: 10 timers, 2 I2Cs, 2 SPI ports, 3 USARTs, 1 led Other: Sleep, stop, and standby modes; serial wire debug and JTAG interfaces Expansion I/F Ardino and Morpho Headers Uses a STM32F103 to provide a ST-Link for programming, debug similar to the OpenOcd FTDI function - USB to JTAG front-end. Wireless WIFI + SD Card SDIO via a "CC3000 WiFi Arduino Shield" added card RS232 console support via a "RS232 Arduino Shield" added card Contents ======== - Development Environment - GNU Toolchain Options - IDEs - NuttX EABI "buildroot" Toolchain - NXFLAT Toolchain - Hardware - Button - LED - USARTs and Serial Consoles - LQFP64 - mbed - Shields - Configurations Development Environment ======================= Either Linux or Cygwin on Windows can be used for the development environment. The source has been built only using the GNU toolchain (see below). Other toolchains will likely cause problems. GNU Toolchain Options ===================== Toolchain Configurations ------------------------ The NuttX make system has been modified to support the following different toolchain options. 1. The CodeSourcery GNU toolchain, 2. The Atollic Toolchain, 3. The devkitARM GNU toolchain, 4. Raisonance GNU toolchain, or 5. The NuttX buildroot Toolchain (see below). All testing has been conducted using the CodeSourcery toolchain for Linux. To use the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to add one of the following configuration options to your .config (or defconfig) file: CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=n : CodeSourcery under Windows CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y : The Atollic toolchain under Windows CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=n : devkitARM under Windows CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y : Raisonance RIDE7 under Windows CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=n : NuttX buildroot under Linux or Cygwin (default) If you change the default toolchain, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or Linux native toolchains. There are several limitations to using a Windows based toolchain in a Cygwin environment. The three biggest are: 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are performed automatically in the Cygwin makefiles using the 'cygpath' utility but you might easily find some new path problems. If so, check out 'cygpath -w' 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links are used in Nuttx (e.g., include/arch). The make system works around these problems for the Windows tools by copying directories instead of linking them. But this can also cause some confusion for you: For example, you may edit a file in a "linked" directory and find that your changes had no effect. That is because you are building the copy of the file in the "fake" symbolic directory. If you use a Windows toolchain, you should get in the habit of making like this: V=1 make clean_context all 2>&1 |tee mout An alias in your .bashrc file might make that less painful. 3. Dependencies are not made when using Windows versions of the GCC. This is because the dependencies are generated using Windows pathes which do not work with the Cygwin make. MKDEP = $(TOPDIR)/tools/mknulldeps.sh The CodeSourcery Toolchain (2009q1) ----------------------------------- The CodeSourcery toolchain (2009q1) does not work with default optimization level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with -Os. The Atollic "Pro" and "Lite" Toolchain -------------------------------------- One problem that I had with the Atollic toolchains is that the provide a gcc.exe and g++.exe in the same bin/ file as their ARM binaries. If the Atollic bin/ path appears in your PATH variable before /usr/bin, then you will get the wrong gcc when you try to build host executables. This will cause to strange, uninterpretable errors build some host binaries in tools/ when you first make. Also, the Atollic toolchains are the only toolchains that have built-in support for the FPU in these configurations. If you plan to use the Cortex-M4 FPU, you will need to use the Atollic toolchain for now. See the FPU section below for more information. The Atollic "Lite" Toolchain ---------------------------- The free, "Lite" version of the Atollic toolchain does not support C++ nor does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite" toolchain, you will have to set: CONFIG_HAVE_CXX=n In order to compile successfully. Otherwise, you will get errors like: "C++ Compiler only available in TrueSTUDIO Professional" The make may then fail in some of the post link processing because of some of the other missing tools. The Make.defs file replaces the ar and nm with the default system x86 tool versions and these seem to work okay. Disable all of the following to avoid using objcopy: CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_MOTOROLA_SREC=n CONFIG_RAW_BINARY=n devkitARM --------- The devkitARM toolchain includes a version of MSYS make. Make sure that the the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM path or will get the wrong version of make. IDEs ==== NuttX is built using command-line make. It can be used with an IDE, but some effort will be required to create the project. Makefile Build -------------- Under Eclipse, it is pretty easy to set up an "empty makefile project" and simply use the NuttX makefile to build the system. That is almost for free under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty makefile project in order to work with Windows (Google for "Eclipse Cygwin" - there is a lot of help on the internet). Using Sourcery CodeBench from http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/overview Download and install the latest version (as of this writting it was sourceryg++-2013.05-64-arm-none-eabi) Import the project from git. File->import->Git-URI, then import a Exiting code as a Makefile progject from the working directory the git clone was done to. Select the Sourcery CodeBench for ARM EABI. N.B. You must do one command line build, before the make will work in CodeBench. Native Build ------------ Here are a few tips before you start that effort: 1) Select the toolchain that you will be using in your .config file 2) Start the NuttX build at least one time from the Cygwin command line before trying to create your project. This is necessary to create certain auto-generated files and directories that will be needed. 3) Set up include pathes: You will need include/, arch/arm/src/stm32, arch/arm/src/common, arch/arm/src/armv7-m, and sched/. 4) All assembly files need to have the definition option -D __ASSEMBLY__ on the command line. Startup files will probably cause you some headaches. The NuttX startup file is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX one time from the Cygwin command line in order to obtain the pre-built startup object needed by RIDE. NuttX EABI "buildroot" Toolchain ================================ A GNU GCC-based toolchain is assumed. The files */setenv.sh should be modified to point to the correct path to the Cortex-M3 GCC toolchain (if different from the default in your PATH variable). If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/). This GNU toolchain builds and executes in the Linux or Cygwin environment. 1. You must have already configured Nuttx in /nuttx. $ (cd tools; ./configure.sh nucleo-f401re/nsh) $ make qconfig $ V=1 make context all 2>&1 | tee mout 2. Download the latest buildroot package into 3. unpack the buildroot tarball. The resulting directory may have versioning information on it like buildroot-x.y.z. If so, rename /buildroot-x.y.z to /buildroot. 4. cd /buildroot 5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config 6. make oldconfig 7. make 8. Edit setenv.h, if necessary, so that the PATH variable includes the path to the newly built binaries. See the file configs/README.txt in the buildroot source tree. That has more details PLUS some special instructions that you will need to follow if you are building a Cortex-M3 toolchain for Cygwin under Windows. NOTE: Unfortunately, the 4.6.3 EABI toolchain is not compatible with the the NXFLAT tools. See the top-level TODO file (under "Binary loaders") for more information about this problem. If you plan to use NXFLAT, please do not use the GCC 4.6.3 EABI toolchain; instead use the GCC 4.3.3 EABI toolchain. NXFLAT Toolchain ================ If you are *not* using the NuttX buildroot toolchain and you want to use the NXFLAT tools, then you will still have to build a portion of the buildroot tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can be downloaded from the NuttX SourceForge download site (https://sourceforge.net/projects/nuttx/files/). This GNU toolchain builds and executes in the Linux or Cygwin environment. 1. You must have already configured Nuttx in /nuttx. cd tools ./configure.sh lpcxpresso-lpc1768/ 2. Download the latest buildroot package into 3. unpack the buildroot tarball. The resulting directory may have versioning information on it like buildroot-x.y.z. If so, rename /buildroot-x.y.z to /buildroot. 4. cd /buildroot 5. cp configs/cortexm3-defconfig-nxflat .config 6. make oldconfig 7. make 8. Edit setenv.h, if necessary, so that the PATH variable includes the path to the newly builtNXFLAT binaries. mbed ==== The Nucleo-F401RE includes boot loader from mbed: https://mbed.org/platforms/ST-Nucleo-F401RE/ https://mbed.org/handbook/Homepage Using the mbed loader: 1. Connect the Nucleo-F401RE to the host PC using the USB connector. 2. A new file system will appear called NUCLEO; open it with Windows Explorer (assuming that you are using Windows). 3. Drag and drop nuttx.bin into the MBED window. This will load the nuttx.bin binary into the Nucleo-F401RE. The NUCLEO window will close then re-open and the Nucleo-F401RE will be running the new code. Hardware ======== GPIO ---- SERIAL_TX=PA_2 USER_BUTTON=PC_13 SERIAL_RX=PA_3 LED1 =PA_5 A0=PA_0 USART2RX D0=PA_3 D8 =PA_9 A1=PA_1 USART2TX D1=PA_2 D9 =PC_7 A2=PA_4 D2=PA_10 WIFI_CS=D10=PB_6 SPI_CS A3=PB_0 WIFI_INT=D3=PB_3 D11=PA_7 SPI_MOSI A4=PC_1 SDCS=D4=PB_5 D12=PA_6 SPI_MISO A5=PC_0 WIFI_EN=D5=PB_4 LED1=D13=PA_5 SPI_SCK LED2=D6=PB_10 I2C1_SDA=D14=PB_9 Probe D7=PA_8 I2C1_SCL=D15=PB_8 Probe From: https://mbed.org/platforms/ST-Nucleo-F401RE/ Buttons ------- B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32 microcontroller. LEDs ---- The Nucleo F401RE and a single user LED, LD2. LD2 is the green LED connected to Arduino signal D13 corresponding to MCU I/O PA5 (pin 21) or PB13 (pin 34) depending on the STM32target. - When the I/O is HIGH value, the LED is on. - When the I/O is LOW, the LED is off. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is defined. In that case, the usage by the board port is defined in include/board.h and src/sam_leds.c. The LEDs are used to encode OS-related events as follows when the red LED (PE24) is available: SYMBOL Meaning LD2 ------------------- ----------------------- ----------- LED_STARTED NuttX has been started OFF LED_HEAPALLOCATE Heap has been allocated OFF LED_IRQSENABLED Interrupts enabled OFF LED_STACKCREATED Idle stack created ON LED_INIRQ In an interrupt No change LED_SIGNAL In a signal handler No change LED_ASSERTION An assertion failed No change LED_PANIC The system has crashed Blinking LED_IDLE MCU is is sleep mode Not used Thus if LD2, NuttX has successfully booted and is, apparently, running normally. If LD2 is flashing at approximately 2Hz, then a fatal error has been detected and the system has halted. Serial Consoles =============== USART1 ------ RXD: PA11 CN10 pin 14 PB7 CN7 pin 21 TXD: PA10 CN9 pin 3, CN10 pin 33 PB6 CN5 pin 3, CN10 pin 17 USART2 ----- RXD: PA3 CN9 pin 1 (See SB13, 14, 62, 63). CN10 pin 37 PD6 TXD: PA2 CN9 pin 2(See SB13, 14, 62, 63). CN10 pin 35 PD5 If you have a 3.3 V TTL to RS-232 converter then this is the most convenient serial console to use. UART2 is the default in all of these configurations. Nucleo CN9 STM32F401RE ----------- ------------ Pin 1 PA3 USART2_RX Pin 2 PA2 USART2_TX Solder Bridges. This configuration requires: - SB62 and SB63 Closed: PA2 and PA3 on STM32 MCU are connected to D1 and D0 (pin 7 and pin 8) on Arduino connector CN9 and ST Morpho connector CN10 as USART signals. Thus SB13 and SB14 should be OFF. - SB13 and SB14 Open: PA2 and PA3 on STM32F103C8T6 (ST-LINK MCU) are disconnected to PA3 and PA2 on STM32 MCU. USART6 ------ RXD: PC7 CN5 pin2, CN10 pin 19 PA12 CN10, pin 12 TXD: PC6 CN10, pin 4 PA11 CN10, pin 14 Virtual COM Port ---------------- Yet another option is to use UART0 and the USB virtual COM port. This option may be more convenient for long term development, but was painful to use during board bring-up. Solder Bridges. This configuration requires: - SB62 and SB63 Open: PA2 and PA3 on STM32 MCU are disconnected to D1 and D0 (pin 7 and pin 8) on Arduino connector CN9 and ST Morpho connector CN10. - SB13 and SB14 Closed: PA2 and PA3 on STM32F103C8T6 (ST-LINK MCU) are connected to PA3 and PA2 on STM32 MCU to have USART communication between them. Thus SB61,SB62 and SB63 should be OFF. Default ------- As shipped, SB62 and SB63 are open and SB13 and SB14 closed, so the virtual COM port is enabled. Shields ======= 1. RS-232 from Cutedigi.com. Supports a single RS-232 connected via Nucleo CN9 STM32F401RE Cutedigi ----------- ------------ -------- Pin 1 PA3 USART2_RX RXD Pin 2 PA2 USART2_TX TXD Support for this shield is enabled by selecting: CONFIG_STM32_USART2=y CONFIG_USART2_ISUART=y CONFIG_USART2_SERIAL_CONSOLE=y CONFIG_USART2_RXBUFSIZE=256 CONFIG_USART2_TXBUFSIZE=256 CONFIG_USART2_BAUD=115200 CONFIG_USART2_BITS=8 CONFIG_USART2_PARITY=0 CONFIG_USART2_2STOP=0 2. CC3000 Wireless shield Support this shield is enabled by configuring the CC3000 networking: CONFIG_WL_CC3000 Configurations ============== Composite: The composite is a super set of all the functions in nsh, usbserial, usbmsc. (usbnsh has not been rung out). Build it with make distclean;(cd tools;./configure.sh nucleo-f401re/nsh) then run make menuconfig if you wish to customize things. or $ make qconfig N.B. Memory is tight, both Flash and RAM are taxed. If you enable debugging you will need to add -Os following the line -g in the line: ifeq ($(CONFIG_DEBUG_SYMBOLS),y) ARCHOPTIMIZATION = -g in the top level Make.degs or the code will not fit. Stack space has been hand optimized using the stack coloring by enabling "Stack usage debug hooks" (CONFIG_DEBUG_STACK) in Build Setup-> Debug Options. I have selected values that have 8-16 bytes of headroom with network debugging on. If you enable more debugging and get a hard fault or any weirdness like commands hanging. Then the Idle, main or Interrupt stack my be too small. Stop the target and have a look a memory for a blown stack: No DEADBEEF at the lowest address of a given stack. Given the RAM memory constraints it is not possible to be running the network and USB CDC/ACM and MSC at the same time. But on the bright side, you can export the FLASH memory to the PC. Write files on the Flash. Reboot and mount the FAT FS and run network code that will have access the files. You can use the scripts/cdc-acm.inf file to install the windows composite device. Network control is facilitated by running the c3b (cc3000basic) application. Run c3b from the nsh prompt. +-------------------------------------------+ | Nuttx CC3000 Demo Program | +-------------------------------------------+ 01 - Initialize the CC3000 02 - Show RX & TX buffer sizes, & free RAM 03 - Start Smart Config 04 - Manually connect to AP 05 - Manually add connection profile 06 - List access points 07 - Show CC3000 information 08 - Telnet Type 01-07 to select above option: Select 01. Then use 03 and the TI Smart config application running on an IOS or Android device to configure join your network. Use 07 to see the IP address of the device. (On the next reboot running c3b 01 the CC3000 will automaticaly rejoin the network after the 01 give it a few seconds and enter 07 or 08) Use 08 to start Telnet. Then you can connect to the device using the address listed in command 07. qq will exit the c3b with the telnet deamon running (if started) Slow.... You will be thinking 300 bps. This is because of packet sizes and how the select thread runs in the telnet session. Telnet is not the best showcase for the CC3000, but simply a proof of network connectivity. http POST and GET should be more efficient.