/****************************************************************************** * drivers/wireless/spirit/include/spirit_gpio.h * This file provides all the low level API to manage SPIRIT GPIO. * * Copyright(c) 2015 STMicroelectronics * Author: VMA division - AMS * Version 3.2.2 08-July-2015 * * Adapted for NuttX by: * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************/ #ifndef __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_GPIO_H #define __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_GPIO_H /* This module can be used to configure the Spirit GPIO pins to perform * specific functions. The structure gpioIRQ can be used to specify these * features for one of the four Spirit GPIO pin. * * The following example shows how to configure a pin (GPIO 3) to be used as * an IRQ source for a microcontroller using the spirit_gpio_initialize() * function. * * Example: * * struct spirit_gpio_init_s g_gpio_init = * { * SPIRIT_GPIO_3, * SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP, * SPIRIT_GPIO_DIG_OUT_IRQ * }; * * ... * * spirit_gpio_initialize(&g_gpio_init); * * NOTE: Please read the functions documentation for the other GPIO * features. */ /****************************************************************************** * Included Files ******************************************************************************/ #include "spirit_regs.h" #include "spirit_types.h" /****************************************************************************** * Pre-processor Definitions ******************************************************************************/ /* Macros used in debug assertions */ #define IS_SPIRIT_GPIO(pin) \ ((pin == SPIRIT_GPIO_0) || (pin == SPIRIT_GPIO_1) || \ (pin == SPIRIT_GPIO_2) || (pin == SPIRIT_GPIO_3)) #define IS_SPIRIT_GPIO_MODE(mode) \ ((mode == SPIRIT_GPIO_MODE_DIGITAL_INPUT) || \ (mode == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP) || \ (mode == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP)) #define IS_SPIRIT_GPIO_IO(iosel) \ ((iosel == SPIRIT_GPIO_DIG_OUT_IRQ) || \ (iosel == SPIRIT_GPIO_DIG_OUT_POR_INV) || \ (iosel == SPIRIT_GPIO_DIG_OUT_WUT_EXP) || \ (iosel == SPIRIT_GPIO_DIG_OUT_LBD) || \ (iosel == SPIRIT_GPIO_DIG_OUT_TX_DATA) || \ (iosel == SPIRIT_GPIO_DIG_OUT_TX_STATE) || \ (iosel == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY) || \ (iosel == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RX_DATA) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RX_CLOCK) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RX_STATE) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY) || \ (iosel == SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH) || \ (iosel == SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE) || \ (iosel == SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED) || \ (iosel == SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD) || \ (iosel == SPIRIT_GPIO_DIG_OUT_MCU_CLOCK) || \ (iosel == SPIRIT_GPIO_DIG_OUT_TX_RX_MODE) || \ (iosel == SPIRIT_GPIO_DIG_OUT_VDD) || \ (iosel == SPIRIT_GPIO_DIG_OUT_GND) || \ (iosel == SPIRIT_GPIO_DIG_OUT_SMPS_EXT) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_READY) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_LOCK) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT) ||\ (iosel == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG) ||\ (iosel == SPIRIT_GPIO_DIG_IN_TX_COMMAND) ||\ (iosel == SPIRIT_GPIO_DIG_IN_RX_COMMAND) ||\ (iosel == SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF) ||\ (iosel == SPIRIT_GPIO_DIG_IN_DATA_WAKEUP) ||\ (iosel == SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ)) #define IS_SPIRIT_GPIO_LEVEL(level) \ (((level) == LOW) || ((level) == HIGH)) #define IS_SPIRIT_CLOCK_OUTPUT_XO(ratio) \ (((ratio) == XO_RATIO_1) || ((ratio) == XO_RATIO_2_3) || \ ((ratio) == XO_RATIO_1_2) || ((ratio) == XO_RATIO_1_3) || \ ((ratio) == XO_RATIO_1_4) || ((ratio) == XO_RATIO_1_6) || \ ((ratio) == XO_RATIO_1_8) || ((ratio) == XO_RATIO_1_12) || \ ((ratio) == XO_RATIO_1_16) || ((ratio) == XO_RATIO_1_24) || \ ((ratio) == XO_RATIO_1_36) || ((ratio) == XO_RATIO_1_48) || \ ((ratio) == XO_RATIO_1_64) || ((ratio) == XO_RATIO_1_96) || \ ((ratio) == XO_RATIO_1_128) || ((ratio) == XO_RATIO_1_192)) #define IS_SPIRIT_CLOCK_OUTPUT_RCO(ratio) \ (((ratio) == RCO_RATIO_1) || ((ratio) == RCO_RATIO_1_128)) #define IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(cycles) \ (((cycles) == EXTRA_CLOCK_CYCLES_0) || \ ((cycles) == EXTRA_CLOCK_CYCLES_64) || \ ((cycles) == EXTRA_CLOCK_CYCLES_256) || \ ((cycles) == EXTRA_CLOCK_CYCLES_512)) /****************************************************************************** * Public Types ******************************************************************************/ #ifdef __cplusplus extern "C" { #endif /* SPIRIT GPIO pin enumeration. */ enum spirit_gpio_pin_e { SPIRIT_GPIO_0 = GPIO0_CONF_BASE, /* GPIO_0 selected */ SPIRIT_GPIO_1 = GPIO1_CONF_BASE, /* GPIO_1 selected */ SPIRIT_GPIO_2 = GPIO2_CONF_BASE, /* GPIO_2 selected */ SPIRIT_GPIO_3 = GPIO3_CONF_BASE /* GPIO_3 selected */ }; /* SPIRIT GPIO mode enumeration. */ enum spirit_gpio_mode_e { SPIRIT_GPIO_MODE_DIGITAL_INPUT = 0x01, /* Digital Input on GPIO */ SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP = 0x02, /* Digital Output on GPIO * (low current) */ SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP = 0x03 /* Digital Output on GPIO * (high current) */ }; /* SPIRIT I/O selection enumeration. */ enum spirit_gpio_io_e { SPIRIT_GPIO_DIG_OUT_IRQ = 0x00, /* nIRQ (Interrupt Request, * active low) , default * configuration after POR */ SPIRIT_GPIO_DIG_OUT_POR_INV = 0x08, /* POR inverted (active low) */ SPIRIT_GPIO_DIG_OUT_WUT_EXP = 0x10, /* Wake-Up Timer expiration: * "1" when WUT has expired */ SPIRIT_GPIO_DIG_OUT_LBD = 0x18, /* Low battery detection: "1" * when battery is below * threshold setting */ SPIRIT_GPIO_DIG_OUT_TX_DATA = 0x20, /* TX data internal clock * output (TX data are sampled * on the rising edge of it) */ SPIRIT_GPIO_DIG_OUT_TX_STATE = 0x28, /* TX state indication: "1" * when Spirit1 is passing in * the TX state */ SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY = 0x30, /* TX FIFO Almost Empty Flag */ SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL = 0x38, /* TX FIFO Almost Full Flag */ SPIRIT_GPIO_DIG_OUT_RX_DATA = 0x40, /* RX data output */ SPIRIT_GPIO_DIG_OUT_RX_CLOCK = 0x48, /* RX clock output * (recovered from received * data) */ SPIRIT_GPIO_DIG_OUT_RX_STATE = 0x50, /* RX state indication: "1" * when Spirit1 is passing in * the RX state */ SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL = 0x58, /* RX FIFO Almost Full Flag */ SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY = 0x60, /* RX FIFO Almost Empty Flag */ SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH = 0x68, /* Antenna switch used for * antenna diversity */ SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE = 0x70, /* Valid Preamble Detected Flag */ SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED = 0x78, /* Sync WordSync Word Detected * Flag */ SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD = 0x80, /* RSSI above threshold */ SPIRIT_GPIO_DIG_OUT_MCU_CLOCK = 0x88, /* MCU Clock */ SPIRIT_GPIO_DIG_OUT_TX_RX_MODE = 0x90, /* TX or RX mode indicator * (to enable an external range * extender) */ SPIRIT_GPIO_DIG_OUT_VDD = 0x98, /* VDD (to emulate an additional * GPIO of the MCU, programmable * by SPI) */ SPIRIT_GPIO_DIG_OUT_GND = 0xa0, /* GND (to emulate an additional * GPIO of the MCU, programmable * by SPI) */ SPIRIT_GPIO_DIG_OUT_SMPS_EXT = 0xa8, /* External SMPS enable * signal (active high) */ SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY = 0xb0, SPIRIT_GPIO_DIG_OUT_READY = 0xb8, SPIRIT_GPIO_DIG_OUT_LOCK = 0xc0, SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG = 0xc8, SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK = 0xd0, SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG = 0xd8, SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET = 0xe0, SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION = 0xe8, SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT = 0xf0, SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG = 0xff, SPIRIT_GPIO_DIG_IN_TX_COMMAND = 0x00, SPIRIT_GPIO_DIG_IN_RX_COMMAND = 0x08, SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF = 0x10, SPIRIT_GPIO_DIG_IN_DATA_WAKEUP = 0x18, SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ = 0x20 }; /* SPIRIT GPIO Init structure definition. */ struct spirit_gpio_init_s { enum spirit_gpio_pin_e gpiopin; /* Specifies the GPIO pins to be * configured. This parameter can be * any value of enum spirit_gpio_pin_e */ enum spirit_gpio_mode_e gpiomode; /* Specifies the operating mode for * the selected pins. This parameter * can be a value of enum * spirit_gpio_mode_e */ enum spirit_gpio_io_e gpioio; /* Specifies the I/O selection for * the selected pins. This parameter * can be a value of enum spirit_gpio_io_e */ }; /* SPIRIT OutputLevel enumeration. */ enum spirit_outputlevel_e { LOW = 0, HIGH = 1 }; /* SPIRIT clock output XO prescaler enumeration. */ enum spirit_clockoutput_xoprescaler_e { XO_RATIO_1 = 0x00, /* XO Clock signal available on the GPIO divided by 1 */ XO_RATIO_2_3 = 0x02, /* XO Clock signal available on the GPIO divided by 2/3 */ XO_RATIO_1_2 = 0x04, /* XO Clock signal available on the GPIO divided by 1/2 */ XO_RATIO_1_3 = 0x06, /* XO Clock signal available on the GPIO divided by 1/3 */ XO_RATIO_1_4 = 0x08, /* XO Clock signal available on the GPIO divided by 1/4 */ XO_RATIO_1_6 = 0x0a, /* XO Clock signal available on the GPIO divided by 1/6 */ XO_RATIO_1_8 = 0x0C, /* XO Clock signal available on the GPIO divided by 1/8 */ XO_RATIO_1_12 = 0x0e, /* XO Clock signal available on the GPIO divided by 1/12 */ XO_RATIO_1_16 = 0x10, /* XO Clock signal available on the GPIO divided by 1/16 */ XO_RATIO_1_24 = 0x12, /* XO Clock signal available on the GPIO divided by 1/24 */ XO_RATIO_1_36 = 0x14, /* XO Clock signal available on the GPIO divided by 1/36 */ XO_RATIO_1_48 = 0x16, /* XO Clock signal available on the GPIO divided by 1/48 */ XO_RATIO_1_64 = 0x18, /* XO Clock signal available on the GPIO divided by 1/64 */ XO_RATIO_1_96 = 0x1a, /* XO Clock signal available on the GPIO divided by 1/96 */ XO_RATIO_1_128 = 0x1c, /* XO Clock signal available on the GPIO divided by 1/128 */ XO_RATIO_1_192 = 0x1e /* XO Clock signal available on the GPIO divided by 1/196 */ }; /* SPIRIT Clock Output RCO prescaler enumeration. */ enum spirit_clockoutput_rcoprescaler_e { RCO_RATIO_1 = 0x00, /* RCO Clock signal available on the GPIO divided by 1 */ RCO_RATIO_1_128 = 0x01 /* RCO Clock signal available on the GPIO divided by 1/128 */ }; /* SPIRIT Extra Clock Cycles enumeration. */ enum spirit_extra_clockcycles_e { EXTRA_CLOCK_CYCLES_0 = 0x00, /* 0 extra clock cycles provided to the MCU * before switching to STANDBY * state */ EXTRA_CLOCK_CYCLES_64 = 0x20, /* 64 extra clock cycles provided to the * MCU before switching to STANDBY state */ EXTRA_CLOCK_CYCLES_256 = 0x40, /* 256 extra clock cycles provided to the * MCU before switching to STANDBY state */ EXTRA_CLOCK_CYCLES_512 = 0x60 /* 512 extra clock cycles provided to the * MCU before switching to STANDBY state */ }; /* SPIRIT Clock Output initialization structure definition. */ struct spirit_clockoutput_init_s { uint8_t xoprescaler; /* Specifies the XO Ratio as clock output. This * parameter can be any value from enum * spirit_clockoutput_xoprescaler_e */ uint8_t rcoprescaler; /* Specifies the RCO Ratio as clock output. This * parameter can be any value from enum * spirit_clockoutput_rcoprescaler_e */ uint8_t xtracycles; /* Specifies the Extra Clock Cycles provided before * entering in Standby State. This parameter can * be any value from enum spirit_extra_clockcycles_e */ }; /****************************************************************************** * Public Function Prototypes ******************************************************************************/ /****************************************************************************** * Name: spirit_gpio_initialize * * Description: * Initializes the Spirit GPIOx according to the specified parameters in * the gpioinit parameter. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * gpioinit - A pointer to a struct spirit_gpio_init_s structure that * contains the configuration information for the specified * SPIRIT GPIO. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_initialize(FAR struct spirit_library_s *spirit, FAR const struct spirit_gpio_init_s *gpioinit); /****************************************************************************** * Name: spirit_gpio_enable_tempsensor * * Description: * Enables or Disables the output of temperature sensor on SPIRIT GPIO_0. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * newstate - Bew state for temperature sensor. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_enable_tempsensor(FAR struct spirit_library_s *spirit, enum spirit_functional_state_e newstate); /****************************************************************************** * Name: spirit_gpio_set_outputlevel * * Description: * Forces SPIRIT GPIO_x configured as digital output, to VDD or GND. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * gpio - Specifies the GPIO to be configured. This parameter can be one * of following values: * * SPIRIT_GPIO_0: SPIRIT GPIO_0 * SPIRIT_GPIO_1: SPIRIT GPIO_1 * SPIRIT_GPIO_2: SPIRIT GPIO_2 * SPIRIT_GPIO_3: SPIRIT GPIO_3 * * level - Specifies the level. This parameter can be: HIGH or LOW. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_set_outputlevel(FAR struct spirit_library_s *spirit, enum spirit_gpio_pin_e gpio, enum spirit_outputlevel_e level); /****************************************************************************** * Name: spirit_gpio_get_outputlevel * * Description: * Returns output value (VDD or GND) of SPIRIT GPIO_x, when it is configured * as digital output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * gpio - Specifies the GPIO to be read. This parameter can be one of * following values: * * SPIRIT_GPIO_0: SPIRIT GPIO_0 * SPIRIT_GPIO_1: SPIRIT GPIO_1 * SPIRIT_GPIO_2: SPIRIT GPIO_2 * SPIRIT_GPIO_3: SPIRIT GPIO_3 * * Returned Value: * Logical level of selected GPIO configured as digital output. This * parameter can be: HIGH or LOW. * ******************************************************************************/ enum spirit_outputlevel_e spirit_gpio_get_outputlevel(FAR struct spirit_library_s *spirit, enum spirit_gpio_pin_e gpio); /****************************************************************************** * Name: spirit_gpio_enable_clockoutput * * Description: * Enables or Disables the MCU clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * newstate - New state for the MCU clock output. This parameter can be: * S_ENABLE or S_DISABLE. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_enable_clockoutput(FAR struct spirit_library_s *spirit, enum spirit_functional_state_e newstate); /****************************************************************************** * Name: spirit_gpio_clockoutput_initialize * * Description: * Initializes the SPIRIT Clock Output according to the specified parameters * in the xClockOutputInitStruct. * * NOTE: The function spirit_gpio_enable_clockoutput() must be called in order to * enable or disable the MCU clock dividers. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * clockoutput - Pointer to a struct spirit_clockoutput_init_s structure * that contains the configuration information for the SPIRIT * Clock Output. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_clockoutput_initialize(FAR struct spirit_library_s *spirit, FAR const struct spirit_clockoutput_init_s *clockoutput); /****************************************************************************** * Name: spirit_gpio_set_xoprescaler * * Description: * Sets the XO ratio as clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * xoprescaler - the XO prescaler to be used as clock output. This * parameter can be any value from enum * spirit_clockoutput_xoprescaler_e . * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_set_xoprescaler(FAR struct spirit_library_s *spirit, enum spirit_clockoutput_xoprescaler_e xoprescaler); /****************************************************************************** * Name: spirit_gpio_get_xoprescaler * * Description: * Returns the settled XO prescaler as clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Settled XO prescaler used for clock output. * ******************************************************************************/ enum spirit_clockoutput_xoprescaler_e spirit_gpio_get_xoprescaler(FAR struct spirit_library_s *spirit); /****************************************************************************** * Name: spirit_gpio_set_rcoprescaler * * Description: * Sets the RCO ratio as clock output * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * rcoprescaler - The RCO prescaler to be used as clock output. This * parameter can be any value from enum * spirit_clockoutput_rcoprescaler_e . * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_set_rcoprescaler(FAR struct spirit_library_s *spirit, enum spirit_clockoutput_rcoprescaler_e rcoprescaler); /****************************************************************************** * Name: spirit_gpio_get_rcoprescaler * * Description: * Returns the settled RCO prescaler as clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Settled RCO prescaler used for clock output. * ******************************************************************************/ enum spirit_clockoutput_rcoprescaler_e spirit_gpio_get_rcoprescaler(FAR struct spirit_library_s *spirit); /****************************************************************************** * Name: spirit_gpio_set_extracycles * * Description: * Sets the RCO ratio as clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * xtracycles - The number of extra clock cycles provided before switching * to STANDBY state. This parameter can be any value of enum * spirit_extra_clockcycles_e. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ******************************************************************************/ int spirit_gpio_set_extracycles(FAR struct spirit_library_s *spirit, enum spirit_extra_clockcycles_e xtracycles); /****************************************************************************** * Name: spirit_gpio_get_extracycles * * Description: * Returns the settled RCO prescaler as clock output. * * Input Parameters: * spirit - Reference to a Spirit library state structure instance * * Returned Value: * Settled number of extra clock cycles provided before switching to STANDBY * state. * ******************************************************************************/ enum spirit_extra_clockcycles_e spirit_gpio_get_extracycles(FAR struct spirit_library_s *spirit); #endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_GPIO_H*/