#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menuconfig INPUT
	bool "Input Device Support"
	default n
	---help---
		This directory holds implementations of input device drivers.
		This includes such things as touchscreen and keypad drivers.
		See include/nuttx/input/*.h for registration information.

if INPUT

config INPUT_MOUSE
	bool
	default n
	---help---
		Enable support for mouse devices.

if INPUT_MOUSE

config INPUT_MOUSE_WHEEL
	bool "Enable mouse wheel support"
	default n
	---help---
		Enable support for a 4-button mouse report that includes a wheel
		position.

endif # INPUT_MOUSE

config INPUT_TOUCHSCREEN
	bool
	default n

config INPUT_KEYBOARD
	bool
	default n

config INPUT_UINPUT
	bool
	default n
	---help---
		Enable support virtual input device driver

config UINPUT_RPMSG
	bool "Enable uinput rpmsg"
	depends on INPUT_UINPUT
	depends on RPTUN
	default n
	---help---
		Enable support uinput cross core communication

config UINPUT_TOUCH
	bool "Enable uinput touch"
	select INPUT_TOUCHSCREEN
	select INPUT_UINPUT
	default n
	---help---
		Enable support virtual input touch device driver

if UINPUT_TOUCH

config UINPUT_TOUCH_MAXPOINT
	int "Maximum number of touch points supported"
	default 1

config UINPUT_TOUCH_BUFNUMBER
	int "Number of touch data buffer"
	default 8

endif

config UINPUT_BUTTONS
	bool "Enable uinput buttons"
	select INPUT_BUTTONS
	select INPUT_UINPUT
	default n
	---help---
		Enable support virtual input button device driver

config UINPUT_KEYBOARD
	bool "Enable uinput keyboard"
	select INPUT_KEYBOARD
	select INPUT_UINPUT
	default n
	---help---
		Enable support virtual input keyboard device driver

if UINPUT_KEYBOARD

config UINPUT_KEYBOARD_BUFNUMBER
	int "Number keyboard data buffer"
	default 8

endif

config INPUT_MAX11802
	bool "MAX11802 touchscreen controller"
	default n
	select SPI
	select INPUT_TOUCHSCREEN
	---help---
		Enable support for the MAX11802 touchscreen controller

config INPUT_TSC2007
	bool "TI TSC2007 touchscreen controller"
	default n
	select I2C
	select INPUT_TOUCHSCREEN
	---help---
		Enable support for the TI TSC2007 touchscreen controller

if INPUT_TSC2007

config TSC2007_8BIT
	bool "TSC2007 8-bit Conversions"
	default n
	---help---
		Use faster, but less accurate, 8-bit conversions.  Default: 12-bit conversions.

config TSC2007_MULTIPLE
	bool "Multiple TSC2007 Devices"
	default n
	---help---
		Can be defined to support multiple TSC2007 devices on board.

config TSC2007_NPOLLWAITERS
	int "Number TSC2007 poll waiters"
	default 4
	---help---
		Maximum number of threads that can be waiting on poll()

endif # INPUT_TSC2007

config INPUT_FT5X06
	bool "FocalTech FT5x06 multi-touch, capacitive touch panel controller"
	default n
	select I2C
	select INPUT_TOUCHSCREEN
	---help---
		Enable support for the FocalTech FT5x06 multi-touch, capacitive
		touch panel controller

config INPUT_FT5336
	bool "FocalTech FT5336 multi-touch, capacitive touch panel controller"
	default n
	select I2C
	select INPUT_FT5X06
	select INPUT_TOUCHSCREEN
	depends on EXPERIMENTAL
	---help---
		Enable support for the FocalTech FT5x06 multi-touch, capacitive
		touch panel controller

if INPUT_FT5X06

config FT5X06_POLLMODE
	bool "Polled mode"
	default n
	---help---
		Run the FT5x06 in a non-interrupt driven polled mode.  Events will
		not be driven by interrupts but rather based on a timed poll.

		This is a non-optimal design both because (1) it will lead to delays
		in detecting touch related events and (2) it will consume a
		significant amount of CPU time to perform the polling.

config FT5X06_SWAPXY
	bool "Swap X/Y"
	default n
	---help---
		Reverse the meaning of X and Y to handle different LCD orientations.

config FT5X06_SINGLEPOINT
	bool "Single point"
	default n
	---help---
		Do no report multi-touch events

if FT5X06_SINGLEPOINT

config FT5X06_THRESHX
	int "X threshold"
	default 12
	---help---
		New touch positions will only be reported when the X or Y data changes by these
		thresholds. This trades reduced data rates for some loss in dragging accuracy.  For
		12-bit values the raw ranges are 0-4095. So for example, if your display is
		320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel.  Default: 12

config FT5X06_THRESHY
	int "Y threshold"
	default 12
	---help---
		New touch positions will only be reported when the X or Y data changes by these
		thresholds. This trades reduced data rates for some loss in dragging accuracy.  For
		12-bit values the raw ranges are 0-4095. So for example, if your display is
		320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel.  Default: 12

endif # FT5X06_SINGLEPOINT

config FT5X06_NPOLLWAITERS
	int "Number FT5336/FT5x06 poll waiters"
	default 4
	---help---
		Maximum number of threads that can be waiting on poll()

endif # INPUT_FT5X06

config INPUT_ADS7843E
	bool "TI ADS7843/TSC2046 touchscreen controller"
	default n
	select SPI
	select INPUT_TOUCHSCREEN
	---help---
		Enable support for the TI/Burr-Brown ADS7842 touchscreen controller.  I believe
		that driver should be compatible with the TI/Burr-Brown TSC2046 and XPT2046
		touchscreen controllers as well.

if INPUT_ADS7843E

config ADS7843E_MULTIPLE
	bool "Multiple ADS7843E Devices"
	default n
	---help---
		Can be defined to support multiple ADS7843E devices on board.

config ADS7843E_NPOLLWAITERS
	int "Number poll waiters"
	default 4
	---help---
		Maximum number of threads that can be waiting on poll()

config ADS7843E_SPIDEV
	int "SPI bus number"
	default 0
	---help---
		Selects the SPI bus number identifying that SPI interface that
		connects the ADS843E to the MCU.

config ADS7843E_DEVMINOR
	int "Input device minor number"
	default 0
	---help---
		The ADS7843E device will be registered as /dev/inputN where N is the
		value provided by this setting.

config ADS7843E_SPIMODE
	int "SPI mode"
	default 0
	range 0 3
	---help---
		Controls the SPI mode.  The device should work in mode 0, but
		sometimes you need to experiment.

config ADS7843E_FREQUENCY
	int "SPI frequency"
	default 100000
	---help---
		Define to use a different SPI bus frequency.

config ADS7843E_SWAPXY
	bool "Swap X/Y"
	default n
	---help---
		Reverse the meaning of X and Y to handle different LCD orientations.

config ADS7843E_THRESHX
	int "X threshold"
	default 12
	---help---
		New touch positions will only be reported when the X or Y data changes by these
		thresholds. This trades reduced data rates for some loss in dragging accuracy.  For
		12-bit values the raw ranges are 0-4095. So for example, if your display is
		320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel.  Default: 12

config ADS7843E_THRESHY
	int "Y threshold"
	default 12
	---help---
		New touch positions will only be reported when the X or Y data changes by these
		thresholds. This trades reduced data rates for some loss in dragging accuracy.  For
		12-bit values the raw ranges are 0-4095. So for example, if your display is
		320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel.  Default: 12

endif # INPUT_ADS7843E

config INPUT_MXT
	bool "Atmel maXTouch Driver"
	select INPUT_TOUCHSCREEN
	default n
	---help---
		Enables support for the Atmel maXTouch driver

if INPUT_MXT

config MXT_THRESHX
	int "X threshold"
	default 5
	---help---
		New touch positions will only be reported when the X or Y data
		changes by these thresholds. This trades reduced data rates for some
		loss in dragging accuracy.  For 12-bit values the raw ranges are
		0-4095. So for example, if your display is 800x480, then THRESHX=5
		and THRESHY=8 would correspond to a one pixel change. Default: 5

		NOTE: This does nothing to reduce the interrupt rate.  It only
		reduces the rate at which touch events are reports.

config MXT_THRESHY
	int "Y threshold"
	default 8
	---help---
		New touch positions will only be reported when the X or Y data
		changes by these thresholds. This trades reduced data rates for some
		loss in dragging accuracy.  For 12-bit values the raw ranges are
		0-4095. So for example, if your display is 800x480, then THRESHX=5
		and THRESHY=8 would correspond to a one pixel change. Default: 8

		NOTE: This does nothing to reduce the interrupt rate.  It only
		reduces the rate at which touch events are reports.

config MXT_NPOLLWAITERS
	int "Number poll waiters"
	default 4
	---help---
		Maximum number of threads that can be waiting on poll()

config MXT_DISABLE_CONFIG_DEBUG_INFO
	bool "Disable verbose debug output"
	default y
	depends on DEBUG_INPUT_INFO
	---help---
		The maXTouch tends to generate interrupts at a high rate during the
		contact.  If verbose debug is enabled in this driver, you may not
		be able to get anything done because of the high debug output rate.

		This setting will allow you to keep verbose touchscreen debug output
		in other modules, but to specifically suppress the debug out from
		the MXT driver.  Debug (non-verbose) errors will still be generated,
		but the chit-chat level will be eliminated.

endif # INPUT_MXT

config INPUT_STMPE811
	bool "STMicro STMPE811 Driver"
	default n
	select INPUT_TOUCHSCREEN
	---help---
		Enables support for the STMPE811 driver

if INPUT_STMPE811

choice
	prompt "STMPE Interface"
	default STMPE811_I2C

config STMPE811_SPI
	bool "SPI Interface"
	select SPI
	---help---
		Enables support for the SPI interface (not currently supported)

config STMPE811_I2C
	bool "STMPE811 I2C Interface"
	select I2C
	---help---
		Enables support for the I2C interface

endchoice

config STMPE811_ACTIVELOW
	bool "Active Low Interrupt"
	default n
	---help---
		The STMPE811 interrupt is provided by a discrete input (usually a
		GPIO interrupt on most MCU architectures).  This setting determines
		whether the interrupt is active high (or rising edge triggered) or
		active low (or falling edge triggered).  Default:  Active
		high/rising edge.

config STMPE811_EDGE
	bool "Edge triggered Interrupt"
	default n
	---help---
		The STMPE811 interrupt is provided by a discrete input (usually a
		GPIO interrupt on most MCU architectures).  This setting determines
		whether the interrupt is edge or level triggered.  Default: Level
		triggered.

config STMPE811_MULTIPLE
	bool "Multiple STMPE811 Devices"
	default n
	---help---
		Can be defined to support multiple STMPE811 devices on board.

config STMPE811_NPOLLWAITERS
	int "Number poll waiters"
	default 4
	---help---
		Maximum number of threads that can be waiting on poll()

config STMPE811_TSC_DISABLE
	bool "Disable STMPE811 Touchscreen Support"
	default n
	---help---
		Disable driver touchscreen functionality.

config STMPE811_SWAPXY
	bool "Swap X/Y"
	default n
	depends on !STMPE811_TSC_DISABLE
	---help---
		Reverse the meaning of X and Y to handle different LCD orientations.

config STMPE811_THRESHX
	int "X threshold"
	default 12
	depends on !STMPE811_TSC_DISABLE
	---help---
		STMPE811 touchscreen data comes in at a very high rate.  New touch
		positions will only be reported when the X or Y data changes by these
		thresholds.  This trades reduced data rates for some loss in dragging
		accuracy.  The STMPE811 is configured for 12-bit values; the raw ranges
		are 0-4095.  So for example, if your display is 320x240, then THRESHX=13
		and THRESHY=17 would correspond to one pixel.  Default: 12

config STMPE811_THRESHY
	int "Y threshold"
	default 12
	depends on !STMPE811_TSC_DISABLE
	---help---
		STMPE811 touchscreen data comes in at a very high rate.  New touch
		positions will only be reported when the X or Y data changes by these
		thresholds.  This trades reduced data rates for some loss in dragging
		accuracy.  The STMPE811 is configured for 12-bit values; the raw ranges
		are 0-4095. So for example, if your display is 320x240, then THRESHX=13
		and THRESHY=17 would correspond to one pixel.  Default: 12

config STMPE811_ADC_DISABLE
	bool "Disable STMPE811 ADC Support"
	default y
	---help---
		Disable driver ADC functionality.

config STMPE811_GPIO_DISABLE
	bool "Disable STMPE811 GPIO Support"
	default y
	---help---
		Disable driver GPIO functionality.

config STMPE811_GPIOINT_DISABLE
	bool "Disable STMPE811 GPIO Interrupt Support"
	default y
	depends on !STMPE811_GPIO_DISABLE
	---help---
		Disable driver GPIO interrupt functionality (ignored if GPIO
		functionality is disabled).

config STMPE811_TEMP_DISABLE
	bool "Disable STMPE811 Temperature Sensor Support"
	default y
	---help---
		Disable driver temperature sensor functionality.

config STMPE811_REGDEBUG
	bool "Enable Register-Level STMPE811 Debug"
	default n
	depends on DEBUG_FEATURES
	---help---
		Enable very low register-level debug output.

endif # INPUT_STMPE811

config INPUT_CYPRESS_MBR3108
	bool "Enable Cypress MBR3108 CapSense driver"
	default n
	select INPUT_TOUCHSCREEN
	---help---
		Enable support for Cypress MBR3108 CapSense touch button & proximity
		input sensor.

if INPUT_CYPRESS_MBR3108

config INPUT_CYPRESS_MBR3108_DEBUG
	bool "Enable debug support for Cypress sensor"
	default n
	depends on DEBUG_FEATURES
	---help---
		Enable debugging traces for MBR3108 driver

config INPUT_CYPRESS_MBR3108_NPOLLWAITERS
	int "Number of waiters to poll"
	default 1
	---help---
		Maximum number of threads that can be waiting on poll()

endif # INPUT_CYPRESS_MBR3108

config INPUT_BUTTONS
	bool "Button Inputs"
	default n
	---help---
		Enable standard button upper half driver.

if INPUT_BUTTONS

config INPUT_BUTTONS_LOWER
	bool "Generic Lower Half Button Driver"
	default n
	depends on ARCH_BUTTONS && ARCH_IRQBUTTONS
	---help---
		If the board supports the standard button interfaces as defined in
		include/nuttx/board.h header file, then this standard button lower
		half driver might be usable.

		In order for this generic driver to be usable:
		1. The board implementation must provide the button interfaces as
		   defined in include/nuttx/board.h
		2. The board implementation must support interrupts for each button.

		If your board does not meet these requirements, then the
		button_lower.c file can still be copied to your board src/ directory
		and modified for your specific board requirements.

config INPUT_BUTTONS_NPOLLWAITERS
	int "Max Number of Poll Waiters"
	default 2

endif # INPUT_BUTTONS

config INPUT_DJOYSTICK
	bool "Discrete Joystick"
	default n
	---help---
		Enable standard discrete joystick upper half driver.  A discrete
		joystick refers to a joystick that could be implemented entirely
		with GPIO input pins.  So up, down, left, and right are all discrete
		values like buttons (as opposed to integer values like you might
		obtain from an analog joystick).

if INPUT_DJOYSTICK

config INPUT_DJOYSTICK_NPOLLWAITERS
	int "Max Number of Poll Waiters"
	default 2

endif # INPUT_DJOYSTICK

config INPUT_AJOYSTICK
	bool "Analog Joystick"
	default n
	---help---
		Enable standard analog joystick upper half driver.  An analog
		joystick refers to a joystick that provides position data as an
		integer value that might have been obtained through Analog-
		to-Digital Conversion (ADC).  The analog positional data may also
		be accompanied by discrete button data.

if INPUT_AJOYSTICK

config INPUT_AJOYSTICK_NPOLLWAITERS
	int "Max Number of Poll Waiters"
	default 2

endif # INPUT_AJOYSTICK

config INPUT_NUNCHUCK
	bool "Nintendo Wii Nunchuck Joystick (White Model)"
	default n
	select I2C
	---help---
		Enable a Nintendo Wii Nunchuck joystick upper half driver. The
		nunchuck joystick provides position data as an integer value.The
		analog positional data may also be accompanied by discrete button
		data.

if INPUT_NUNCHUCK

config NUNCHUCK_NPOLLWAITERS
	int "Max Number of Poll Waiters"
	default 2

endif # INPUT_NUNCHUCK

config INPUT_SPQ10KBD
	bool "Solder Party Q10 BlackBerry Keyboard"
	default n
	select I2C
	---help---
		Enable the Solder Party Q10 BlackBerry Keyboard support.  This
		exposes itself as a standard keyboard at /dev/kbdN.
		This keyboard exists both as a standalone module and integrated
		into the Solder Party Keyboard FeatherWing.  Information on this
		can be found at https://www.solder.party/docs/keyboard-pmod/

if INPUT_SPQ10KBD

config SPQ10KBD_DJOY
	bool "Joystick Interface for Buttons"
	select INPUT_DJOYSTICK
	default n

config SPQ10KBD_REGDBG
	bool "Keyboard Register Debug"
	default n

config SPQ10KBD_BUFSIZE
	int "Keyboard Buffer Size"
	default 10

config SPQ10KBD_NPOLLWAITERS
	int "Max Number of Poll Waiters"
	default 2

endif # INPUT_SPQ10KBD

endif # INPUT