/**************************************************************************** * drivers/pipes/pipe_common.c * * Copyright (C) 2008-2009, 2011, 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if CONFIG_DEBUG # include #endif #include "pipe_common.h" #if CONFIG_DEV_PIPE_SIZE > 0 /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* CONFIG_DEV_PIPEDUMP will dump the contents of each transfer into and out * of the pipe. */ #ifdef CONFIG_DEV_PIPEDUMP # define pipe_dumpbuffer(m,a,n) lib_dumpbuffer(m,a,n) #else # define pipe_dumpbuffer(m,a,n) #endif /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void pipecommon_semtake(sem_t *sem); /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: pipecommon_semtake ****************************************************************************/ static void pipecommon_semtake(sem_t *sem) { while (sem_wait(sem) != 0) { /* The only case that an error should occur here is if the wait was * awakened by a signal. */ ASSERT(get_errno() == EINTR); } } /**************************************************************************** * Name: pipecommon_pollnotify ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL static void pipecommon_pollnotify(FAR struct pipe_dev_s *dev, pollevent_t eventset) { int i; for (i = 0; i < CONFIG_DEV_PIPE_NPOLLWAITERS; i++) { struct pollfd *fds = dev->d_fds[i]; if (fds) { fds->revents |= (fds->events & eventset); if (fds->revents != 0) { fvdbg("Report events: %02x\n", fds->revents); sem_post(fds->sem); } } } } #else # define pipecommon_pollnotify(dev,event) #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: pipecommon_allocdev ****************************************************************************/ FAR struct pipe_dev_s *pipecommon_allocdev(void) { struct pipe_dev_s *dev; /* Allocate a private structure to manage the pipe */ dev = (struct pipe_dev_s *)kmm_malloc(sizeof(struct pipe_dev_s)); if (dev) { /* Initialize the private structure */ memset(dev, 0, sizeof(struct pipe_dev_s)); sem_init(&dev->d_bfsem, 0, 1); sem_init(&dev->d_rdsem, 0, 0); sem_init(&dev->d_wrsem, 0, 0); } return dev; } /**************************************************************************** * Name: pipecommon_freedev ****************************************************************************/ void pipecommon_freedev(FAR struct pipe_dev_s *dev) { sem_destroy(&dev->d_bfsem); sem_destroy(&dev->d_rdsem); sem_destroy(&dev->d_wrsem); kmm_free(dev); } /**************************************************************************** * Name: pipecommon_open ****************************************************************************/ int pipecommon_open(FAR struct file *filep) { struct inode *inode = filep->f_inode; struct pipe_dev_s *dev = inode->i_private; int sval; int ret; DEBUGASSERT(dev); /* Make sure that we have exclusive access to the device structure. The * sem_wait() call should fail only if we are awakened by a signal. */ ret = sem_wait(&dev->d_bfsem); if (ret != OK) { fdbg("sem_wait failed: %d\n", get_errno()); DEBUGASSERT(get_errno() > 0); return -get_errno(); } /* If this the first reference on the device, then allocate the buffer. In the * case of d_policy == 1, the buffer already be present when the pipe is * first opened. */ if (dev->d_refs == 0 && dev->d_buffer == NULL) { dev->d_buffer = (uint8_t*)kmm_malloc(CONFIG_DEV_PIPE_SIZE); if (!dev->d_buffer) { (void)sem_post(&dev->d_bfsem); return -ENOMEM; } } /* Increment the reference count on the pipe instance */ dev->d_refs++; /* If opened for writing, increment the count of writers on on the pipe instance */ if ((filep->f_oflags & O_WROK) != 0) { dev->d_nwriters++; /* If this this is the first writer, then the read semaphore indicates the * number of readers waiting for the first writer. Wake them all up. */ if (dev->d_nwriters == 1) { while (sem_getvalue(&dev->d_rdsem, &sval) == 0 && sval < 0) { sem_post(&dev->d_rdsem); } } } /* If opened for read-only, then wait for either (1) at least one writer * on the pipe (policy == 0), or (2) until there is buffered data to be * read (policy == 1). */ sched_lock(); (void)sem_post(&dev->d_bfsem); if ((filep->f_oflags & O_RDWR) == O_RDONLY && /* Read-only */ dev->d_nwriters < 1 && /* No writers on the pipe */ dev->d_wrndx == dev->d_rdndx) /* Buffer is empty */ { /* NOTE: d_rdsem is normally used when the read logic waits for more * data to be written. But until the first writer has opened the * pipe, the meaning is different: it is used prevent O_RDONLY open * calls from returning until there is at least one writer on the pipe. * This is required both by spec and also because it prevents * subsequent read() calls from returning end-of-file because there is * no writer on the pipe. */ ret = sem_wait(&dev->d_rdsem); if (ret != OK) { /* The sem_wait() call should fail only if we are awakened by * a signal. */ fdbg("sem_wait failed: %d\n", get_errno()); DEBUGASSERT(get_errno() > 0); ret = -get_errno(); /* Immediately close the pipe that we just opened */ (void)pipecommon_close(filep); } } sched_unlock(); return ret; } /**************************************************************************** * Name: pipecommon_close ****************************************************************************/ int pipecommon_close(FAR struct file *filep) { struct inode *inode = filep->f_inode; struct pipe_dev_s *dev = inode->i_private; int sval; DEBUGASSERT(dev && dev->d_refs > 0); /* Make sure that we have exclusive access to the device structure. * NOTE: close() is supposed to return EINTR if interrupted, however * I've never seen anyone check that. */ pipecommon_semtake(&dev->d_bfsem); /* Decrement the number of references on the pipe. Check if there are * still oustanding references to the pipe. */ /* Check if the decremented reference count would go to zero */ if (--dev->d_refs > 0) { /* No more references.. If opened for writing, decrement the count of * writers on the pipe instance. */ if ((filep->f_oflags & O_WROK) != 0) { /* If there are no longer any writers on the pipe, then notify all of the * waiting readers that they must return end-of-file. */ if (--dev->d_nwriters <= 0) { while (sem_getvalue(&dev->d_rdsem, &sval) == 0 && sval < 0) { sem_post(&dev->d_rdsem); } } } } /* What is the buffer management policy? Do we free the buffe when the * last client closes the pipe (d_policy == 0), or when the buffer becomes * empty (d_policy). In the latter case, the buffer data will remain * valid and can be obtained when the pipe is re-opened. */ else if (dev->d_policy == 0 || dev->d_wrndx == dev->d_rdndx) { /* Policy 0 or the buffer is empty ... deallocate the buffer now. */ kmm_free(dev->d_buffer); dev->d_buffer = NULL; /* And reset all counts and indices */ dev->d_wrndx = 0; dev->d_rdndx = 0; dev->d_refs = 0; dev->d_nwriters = 0; } sem_post(&dev->d_bfsem); return OK; } /**************************************************************************** * Name: pipecommon_read ****************************************************************************/ ssize_t pipecommon_read(FAR struct file *filep, FAR char *buffer, size_t len) { struct inode *inode = filep->f_inode; struct pipe_dev_s *dev = inode->i_private; #ifdef CONFIG_DEV_PIPEDUMP FAR uint8_t *start = (uint8_t*)buffer; #endif ssize_t nread = 0; int sval; int ret; DEBUGASSERT(dev); /* Make sure that we have exclusive access to the device structure */ if (sem_wait(&dev->d_bfsem) < 0) { return ERROR; } /* If the pipe is empty, then wait for something to be written to it */ while (dev->d_wrndx == dev->d_rdndx) { /* If O_NONBLOCK was set, then return EGAIN */ if (filep->f_oflags & O_NONBLOCK) { sem_post(&dev->d_bfsem); return -EAGAIN; } /* If there are no writers on the pipe, then return end of file */ if (dev->d_nwriters <= 0) { sem_post(&dev->d_bfsem); return 0; } /* Otherwise, wait for something to be written to the pipe */ sched_lock(); sem_post(&dev->d_bfsem); ret = sem_wait(&dev->d_rdsem); sched_unlock(); if (ret < 0 || sem_wait(&dev->d_bfsem) < 0) { return ERROR; } } /* Then return whatever is available in the pipe (which is at least one byte) */ nread = 0; while (nread < len && dev->d_wrndx != dev->d_rdndx) { *buffer++ = dev->d_buffer[dev->d_rdndx]; if (++dev->d_rdndx >= CONFIG_DEV_PIPE_SIZE) { dev->d_rdndx = 0; } nread++; } /* Notify all waiting writers that bytes have been removed from the buffer */ while (sem_getvalue(&dev->d_wrsem, &sval) == 0 && sval < 0) { sem_post(&dev->d_wrsem); } /* Notify all poll/select waiters that they can write to the FIFO */ pipecommon_pollnotify(dev, POLLOUT); sem_post(&dev->d_bfsem); pipe_dumpbuffer("From PIPE:", start, nread); return nread; } /**************************************************************************** * Name: pipecommon_write ****************************************************************************/ ssize_t pipecommon_write(FAR struct file *filep, FAR const char *buffer, size_t len) { struct inode *inode = filep->f_inode; struct pipe_dev_s *dev = inode->i_private; ssize_t nwritten = 0; ssize_t last; int nxtwrndx; int sval; DEBUGASSERT(dev); pipe_dumpbuffer("To PIPE:", (uint8_t*)buffer, len); /* At present, this method cannot be called from interrupt handlers. That is * because it calls sem_wait (via pipecommon_semtake below) and sem_wait cannot * be called from interrupt level. This actually happens fairly commonly * IF dbg() is called from interrupt handlers and stdout is being redirected * via a pipe. In that case, the debug output will try to go out the pipe * (interrupt handlers should use the lldbg() APIs). * * On the other hand, it would be very valuable to be able to feed the pipe * from an interrupt handler! TODO: Consider disabling interrupts instead * of taking semaphores so that pipes can be written from interupt handlers */ DEBUGASSERT(up_interrupt_context() == false) /* Make sure that we have exclusive access to the device structure */ if (sem_wait(&dev->d_bfsem) < 0) { return ERROR; } /* Loop until all of the bytes have been written */ last = 0; for (;;) { /* Calculate the write index AFTER the next byte is written */ nxtwrndx = dev->d_wrndx + 1; if (nxtwrndx >= CONFIG_DEV_PIPE_SIZE) { nxtwrndx = 0; } /* Would the next write overflow the circular buffer? */ if (nxtwrndx != dev->d_rdndx) { /* No... copy the byte */ dev->d_buffer[dev->d_wrndx] = *buffer++; dev->d_wrndx = nxtwrndx; /* Is the write complete? */ if (++nwritten >= len) { /* Yes.. Notify all of the waiting readers that more data is available */ while (sem_getvalue(&dev->d_rdsem, &sval) == 0 && sval < 0) { sem_post(&dev->d_rdsem); } /* Notify all poll/select waiters that they can write to the FIFO */ pipecommon_pollnotify(dev, POLLIN); /* Return the number of bytes written */ sem_post(&dev->d_bfsem); return len; } } else { /* There is not enough room for the next byte. Was anything written in this pass? */ if (last < nwritten) { /* Yes.. Notify all of the waiting readers that more data is available */ while (sem_getvalue(&dev->d_rdsem, &sval) == 0 && sval < 0) { sem_post(&dev->d_rdsem); } } last = nwritten; /* If O_NONBLOCK was set, then return partial bytes written or EGAIN */ if (filep->f_oflags & O_NONBLOCK) { if (nwritten == 0) { nwritten = -EAGAIN; } sem_post(&dev->d_bfsem); return nwritten; } /* There is more to be written.. wait for data to be removed from the pipe */ sched_lock(); sem_post(&dev->d_bfsem); pipecommon_semtake(&dev->d_wrsem); sched_unlock(); pipecommon_semtake(&dev->d_bfsem); } } } /**************************************************************************** * Name: pipecommon_poll ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL int pipecommon_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct inode *inode = filep->f_inode; FAR struct pipe_dev_s *dev = inode->i_private; pollevent_t eventset; pipe_ndx_t nbytes; int ret = OK; int i; DEBUGASSERT(dev && fds); /* Are we setting up the poll? Or tearing it down? */ pipecommon_semtake(&dev->d_bfsem); if (setup) { /* This is a request to set up the poll. Find an available * slot for the poll structure reference */ for (i = 0; i < CONFIG_DEV_PIPE_NPOLLWAITERS; i++) { /* Find an available slot */ if (!dev->d_fds[i]) { /* Bind the poll structure and this slot */ dev->d_fds[i] = fds; fds->priv = &dev->d_fds[i]; break; } } if (i >= CONFIG_DEV_PIPE_NPOLLWAITERS) { fds->priv = NULL; ret = -EBUSY; goto errout; } /* Should immediately notify on any of the requested events? * First, determine how many bytes are in the buffer */ if (dev->d_wrndx >= dev->d_rdndx) { nbytes = dev->d_wrndx - dev->d_rdndx; } else { nbytes = (CONFIG_DEV_PIPE_SIZE-1) + dev->d_wrndx - dev->d_rdndx; } /* Notify the POLLOUT event if the pipe is not full */ eventset = 0; if (nbytes < (CONFIG_DEV_PIPE_SIZE-1)) { eventset |= POLLOUT; } /* Notify the POLLIN event if the pipe is not empty */ if (nbytes > 0) { eventset |= POLLIN; } if (eventset) { pipecommon_pollnotify(dev, eventset); } } else { /* This is a request to tear down the poll. */ struct pollfd **slot = (struct pollfd **)fds->priv; #ifdef CONFIG_DEBUG if (!slot) { ret = -EIO; goto errout; } #endif /* Remove all memory of the poll setup */ *slot = NULL; fds->priv = NULL; } errout: sem_post(&dev->d_bfsem); return ret; } #endif /**************************************************************************** * Name: pipecommon_ioctl ****************************************************************************/ int pipecommon_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct pipe_dev_s *dev = inode->i_private; /* Only one command supported */ if (cmd == PIPEIOC_POLICY) { dev->d_policy = (arg != 0); return OK; } return -ENOTTY; } #endif /* CONFIG_DEV_PIPE_SIZE > 0 */