/**************************************************************************** * drivers/sensors/lm92.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_LM92) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef CONFIG_LM92_I2C_FREQUENCY # define CONFIG_LM92_I2C_FREQUENCY 400000 #endif /* Centigrade to Fahrenheit conversion: F = 9*C/5 + 32 */ #define B16_9DIV5 (9 * 65536 / 5) #define B16_32 (32 * 65536) /**************************************************************************** * Private ****************************************************************************/ struct lm92_dev_s { FAR struct i2c_master_s *i2c; /* I2C interface */ uint8_t addr; /* I2C address */ bool fahrenheit; /* true: temperature will be reported in Fahrenheit */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* I2C Helpers */ static int lm92_i2c_write(FAR struct lm92_dev_s *priv, FAR const uint8_t *buffer, int buflen); static int lm92_i2c_read(FAR struct lm92_dev_s *priv, FAR uint8_t *buffer, int buflen); static int lm92_readb16(FAR struct lm92_dev_s *priv, uint8_t regaddr, FAR b16_t *regvalue); static int lm92_writeb16(FAR struct lm92_dev_s *priv, uint8_t regaddr, b16_t regval); static int lm92_readtemp(FAR struct lm92_dev_s *priv, FAR b16_t *temp); static int lm92_readconf(FAR struct lm92_dev_s *priv, FAR uint8_t *conf); static int lm92_writeconf(FAR struct lm92_dev_s *priv, uint8_t conf); /* Character driver methods */ static int lm92_open(FAR struct file *filep); static int lm92_close(FAR struct file *filep); static ssize_t lm92_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t lm92_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int lm92_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_lm92fops = { lm92_open, lm92_close, lm92_read, lm92_write, NULL, lm92_ioctl, NULL }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lm92_i2c_write * * Description: * Write to the I2C device. * ****************************************************************************/ static int lm92_i2c_write(FAR struct lm92_dev_s *priv, FAR const uint8_t *buffer, int buflen) { struct i2c_msg_s msg; int ret; /* Setup for the transfer */ msg.frequency = CONFIG_LM92_I2C_FREQUENCY, msg.addr = priv->addr; msg.flags = 0; msg.buffer = (FAR uint8_t *)buffer; /* Override const */ msg.length = buflen; /* Then perform the transfer. */ ret = I2C_TRANSFER(priv->i2c, &msg, 1); return (ret >= 0) ? OK : ret; } /**************************************************************************** * Name: lm92_i2c_read * * Description: * Read from the I2C device. * ****************************************************************************/ static int lm92_i2c_read(FAR struct lm92_dev_s *priv, FAR uint8_t *buffer, int buflen) { struct i2c_msg_s msg; int ret; /* Setup for the transfer */ msg.frequency = CONFIG_LM92_I2C_FREQUENCY, msg.addr = priv->addr, msg.flags = I2C_M_READ; msg.buffer = buffer; msg.length = buflen; /* Then perform the transfer. */ ret = I2C_TRANSFER(priv->i2c, &msg, 1); return (ret >= 0) ? OK : ret; } /**************************************************************************** * Name: lm92_readb16 * * Description: * Read a 16-bit register (LM92_TEMP_REG, LM92_THYS_REG, LM92_TCRIT_REG, * LM92_TLOW_REG, LM92_THIGH_REG, or LM92_ID_REG) * ****************************************************************************/ static int lm92_readb16(FAR struct lm92_dev_s *priv, uint8_t regaddr, FAR b16_t *regvalue) { uint8_t buffer[2]; int ret; /* Write the register address */ ret = lm92_i2c_write(priv, ®addr, 1); if (ret < 0) { snerr("ERROR: i2c_write failed: %d\n", ret); return ret; } /* Restart and read 16 bits from the register (discarding 3) */ ret = lm92_i2c_read(priv, buffer, 2); if (ret < 0) { snerr("ERROR: i2c_read failed: %d\n", ret); return ret; } /* Data format is: * TTTTTTTT TTTTTxxx where TTTTTTTTTTTTT is a thirteen-bit, * signed temperature value with LSB = 0.0625 degrees Centigrade. */ *regvalue = (b16_t)((uint32_t)(buffer[0] & (1 << 7)) << 24 | (uint32_t)(buffer[0] & ~(1 << 7)) << 17 | (uint32_t)(buffer[1] & ~7) << 9); sninfo("addr: %02x value: %08x ret: %d\n", regaddr, *regvalue, ret); return OK; } /**************************************************************************** * Name: lm92_writeb16 * * Description: * Write to a 16-bit register * (LM92_TEMP_REG, LM92_THYS_REG, LM92_TCRIT_REG, * LM92_TLOW_REG, LM92_THIGH_REG, or LM92_ID_REG) * ****************************************************************************/ static int lm92_writeb16(FAR struct lm92_dev_s *priv, uint8_t regaddr, b16_t regval) { uint8_t buffer[3]; sninfo("addr: %02x value: %08x\n", regaddr, regval); /* Set up a 3-byte message to send */ buffer[0] = regaddr; buffer[1] = (uint8_t)(((uint32_t)regval & (1 << 31)) >> 24 | ((uint32_t)regval & ~(1 << 31)) >> 17); buffer[2] = (uint8_t)(((uint32_t)regval & ~(1 << 31)) >> 9); /* Write the register address followed by the data (no RESTART) */ return lm92_i2c_write(priv, buffer, 3); } /**************************************************************************** * Name: lm92_readtemp * * Description: * Read the temperature register with special scaling (LM92_TEMP_REG) * ****************************************************************************/ static int lm92_readtemp(FAR struct lm92_dev_s *priv, FAR b16_t *temp) { b16_t temp16; int ret; /* Read the raw temperature data (b16_t) */ ret = lm92_readb16(priv, LM92_TEMP_REG, &temp16); if (ret < 0) { snerr("ERROR: lm92_readb16 failed: %d\n", ret); return ret; } add_sensor_randomness(temp16); sninfo("Centigrade: %08x\n", temp16); /* Was Fahrenheit requested? */ if (priv->fahrenheit) { /* Centigrade to Fahrenheit conversion: F = 9*C/5 + 32 */ temp16 = b16mulb16(temp16, B16_9DIV5) + B16_32; sninfo("Fahrenheit: %08x\n", temp16); } *temp = temp16; return OK; } /**************************************************************************** * Name: lm92_readconf * * Description: * Read the 8-bit LM92 configuration register * ****************************************************************************/ static int lm92_readconf(FAR struct lm92_dev_s *priv, FAR uint8_t *conf) { uint8_t buffer; int ret; /* Write the configuration register address */ buffer = LM92_CONF_REG; ret = lm92_i2c_write(priv, &buffer, 1); if (ret < 0) { snerr("ERROR: i2c_write failed: %d\n", ret); return ret; } /* Restart and read 8 bits from the register */ ret = lm92_i2c_read(priv, conf, 1); sninfo("conf: %02x ret: %d\n", *conf, ret); return ret; } /**************************************************************************** * Name: lm92_writeconf * * Description: * Write to a 8-bit LM92 configuration register. * ****************************************************************************/ static int lm92_writeconf(FAR struct lm92_dev_s *priv, uint8_t conf) { uint8_t buffer[2]; sninfo("conf: %02x\n", conf); /* Set up a 2-byte message to send */ buffer[0] = LM92_CONF_REG; buffer[1] = conf; /* Write the register address followed by the data (no RESTART) */ return lm92_i2c_write(priv, buffer, 2); } /**************************************************************************** * Name: lm92_readid * * Description: * Read the 16-bit LM92 identification register * ****************************************************************************/ static int lm92_readid(FAR struct lm92_dev_s *priv, FAR uint16_t *id) { uint8_t buffer[2]; uint8_t regaddr; int ret; /* Write the identification register address */ regaddr = LM92_ID_REG; ret = lm92_i2c_write(priv, ®addr, 1); if (ret < 0) { snerr("ERROR: i2c_write failed: %d\n", ret); return ret; } /* Restart and read 16 bits from the register */ ret = lm92_i2c_read(priv, buffer, 2); if (ret < 0) { snerr("ERROR: i2c_read failed: %d\n", ret); return ret; } *id = (uint16_t)buffer[0] << 8 | (uint16_t)buffer[1]; sninfo("id: %04x ret: %d\n", *id, ret); return OK; } /**************************************************************************** * Name: lm92_open * * Description: * This function is called whenever the LM92 device is opened. * ****************************************************************************/ static int lm92_open(FAR struct file *filep) { return OK; } /**************************************************************************** * Name: lm92_close * * Description: * This function is called whenever the LM92 device is closed. * ****************************************************************************/ static int lm92_close(FAR struct file *filep) { return OK; } /**************************************************************************** * Name: lm92_read ****************************************************************************/ static ssize_t lm92_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct lm92_dev_s *priv = inode->i_private; FAR b16_t *ptr; ssize_t nsamples; int i; int ret; /* How many samples were requested to get? */ nsamples = buflen / sizeof(b16_t); ptr = (FAR b16_t *)buffer; sninfo("buflen: %d nsamples: %d\n", buflen, nsamples); /* Get the requested number of samples */ for (i = 0; i < nsamples; i++) { b16_t temp = 0; /* Read the next b16_t temperature value */ ret = lm92_readtemp(priv, &temp); if (ret < 0) { snerr("ERROR: lm92_readtemp failed: %d\n", ret); return (ssize_t)ret; } /* Save the temperature value in the user buffer */ *ptr++ = temp; } return nsamples * sizeof(b16_t); } /**************************************************************************** * Name: lm92_write ****************************************************************************/ static ssize_t lm92_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: lm92_ioctl ****************************************************************************/ static int lm92_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct lm92_dev_s *priv = inode->i_private; int ret = OK; switch (cmd) { /* Read from the configuration register. Arg: uint8_t* pointer */ case SNIOC_READCONF: { FAR uint8_t *ptr = (FAR uint8_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readconf(priv, ptr); sninfo("conf: %02x ret: %d\n", *ptr, ret); } break; /* Write to the configuration register. Arg: uint8_t value */ case SNIOC_WRITECONF: ret = lm92_writeconf(priv, (uint8_t)arg); sninfo("conf: %02x ret: %d\n", *(uint8_t *)arg, ret); break; /* Shutdown the LM92. Arg: None */ case SNIOC_SHUTDOWN: { uint8_t conf; ret = lm92_readconf(priv, &conf); if (ret == OK) { ret = lm92_writeconf(priv, conf | LM92_CONF_SHUTDOWN); } sninfo("conf: %02x ret: %d\n", conf | LM92_CONF_SHUTDOWN, ret); } break; /* Powerup the LM92. Arg: None */ case SNIOC_POWERUP: { uint8_t conf; ret = lm92_readconf(priv, &conf); if (ret == OK) { ret = lm92_writeconf(priv, conf & ~LM92_CONF_SHUTDOWN); } sninfo("conf: %02x ret: %d\n", conf & ~LM92_CONF_SHUTDOWN, ret); } break; /* Report samples in Fahrenheit. Arg: None */ case SNIOC_FAHRENHEIT: priv->fahrenheit = true; sninfo("Fahrenheit\n"); break; /* Report samples in Centigrade. Arg: None */ case SNIOC_CENTIGRADE: priv->fahrenheit = false; sninfo("Centigrade\n"); break; /* Read THYS temperature register. Arg: b16_t* pointer */ case SNIOC_READTHYS: { FAR b16_t *ptr = (FAR b16_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readb16(priv, LM92_THYS_REG, ptr); sninfo("THYS: %08x ret: %d\n", *ptr, ret); } break; /* Write THYS temperature register. Arg: b16_t value */ case SNIOC_WRITETHYS: ret = lm92_writeb16(priv, LM92_THYS_REG, (b16_t)arg); sninfo("THYS: %08x ret: %d\n", (b16_t)arg, ret); break; /* Read TCRIT temperature register. Arg: b16_t* pointer */ case SNIOC_READTCRIT: { FAR b16_t *ptr = (FAR b16_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readb16(priv, LM92_TCRIT_REG, ptr); sninfo("TCRIT: %08x ret: %d\n", *ptr, ret); } break; /* Write TCRIT temperature register. Arg: b16_t value */ case SNIOC_WRITETCRIT: ret = lm92_writeb16(priv, LM92_TCRIT_REG, (b16_t)arg); sninfo("TCRIT: %08x ret: %d\n", (b16_t)arg, ret); break; /* Read TLOW temperature register. Arg: b16_t* pointer */ case SNIOC_READTLOW: { FAR b16_t *ptr = (FAR b16_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readb16(priv, LM92_TLOW_REG, ptr); sninfo("TLOW: %08x ret: %d\n", *ptr, ret); } break; /* Write TLOW temperature register. Arg: b16_t value */ case SNIOC_WRITETLOW: ret = lm92_writeb16(priv, LM92_TLOW_REG, (b16_t)arg); sninfo("TLOW: %08x ret: %d\n", (b16_t)arg, ret); break; /* Read THIGH temperature register. Arg: b16_t* pointer */ case SNIOC_READTHIGH: { FAR b16_t *ptr = (FAR b16_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readb16(priv, LM92_THIGH_REG, ptr); sninfo("THIGH: %08x ret: %d\n", *ptr, ret); } break; /* Write THIGH temperature register. Arg: b16_t value */ case SNIOC_WRITETHIGH: ret = lm92_writeb16(priv, LM92_THIGH_REG, (b16_t)arg); sninfo("THIGH: %08x ret: %d\n", (b16_t)arg, ret); break; /* Read from the identification register. Arg: uint16_t* pointer */ case SNIOC_READID: { FAR uint16_t *ptr = (FAR uint16_t *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); ret = lm92_readid(priv, ptr); sninfo("id: %04x ret: %d\n", *ptr, ret); } break; default: snerr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: lm92_register * * Description: * Register the LM92 character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/temp0". * i2c - An instance of the I2C interface to use to communicate * with the LM92. * addr - The I2C address of the LM92. The base I2C address of the LM92 * is 0x48. Bits 0-2 can be controlled to get 4 unique addresses * from 0x48 through 0x4b. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int lm92_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, uint8_t addr) { FAR struct lm92_dev_s *priv; int ret; /* Sanity check */ DEBUGASSERT(i2c != NULL); DEBUGASSERT(addr == CONFIG_LM92_ADDR0 || addr == CONFIG_LM92_ADDR1 || addr == CONFIG_LM92_ADDR2 || addr == CONFIG_LM92_ADDR3); /* Initialize the LM92 device structure */ priv = (FAR struct lm92_dev_s *)kmm_malloc(sizeof(struct lm92_dev_s)); if (priv == NULL) { snerr("ERROR: Failed to allocate instance\n"); return -ENOMEM; } priv->i2c = i2c; priv->addr = addr; priv->fahrenheit = false; /* Register the character driver */ ret = register_driver(devpath, &g_lm92fops, 0666, priv); if (ret < 0) { snerr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); } return ret; } #endif /* CONFIG_I2C && CONFIG_SENSORS_LM92 */