/**************************************************************************** * drivers/rwbuffer.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_DRVR_WRITEBUFFER) || defined(CONFIG_DRVR_READAHEAD) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef CONFIG_DRVR_WRDELAY # define CONFIG_DRVR_WRDELAY 350 #endif #if !defined(CONFIG_SCHED_WORKQUEUE) && CONFIG_DRVR_WRDELAY != 0 # error "Worker thread support is required (CONFIG_SCHED_WORKQUEUE)" #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static ssize_t rwb_read_(FAR struct rwbuffer_s *rwb, off_t startblock, size_t nblocks, FAR uint8_t *rdbuffer); /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: rwb_semtake ****************************************************************************/ static int rwb_semtake(FAR sem_t *sem) { return nxsem_wait_uninterruptible(sem); } /**************************************************************************** * Name: rwb_forcetake ****************************************************************************/ static int rwb_forcetake(FAR sem_t *sem) { int result; int ret = OK; do { result = rwb_semtake(sem); /* The only expected failure is if the thread is canceled */ DEBUGASSERT(result == OK || result == -ECANCELED); if (ret == OK && result < 0) { /* Remember the first error */ ret = result; } } while (result < 0); return ret; } /**************************************************************************** * Name: rwb_semgive ****************************************************************************/ #define rwb_semgive(s) nxsem_post(s) /**************************************************************************** * Name: rwb_overlap ****************************************************************************/ static inline bool rwb_overlap(off_t blockstart1, size_t nblocks1, off_t blockstart2, size_t nblocks2) { off_t blockend1 = blockstart1 + nblocks1 - 1; off_t blockend2 = blockstart2 + nblocks2 - 1; /* If the buffer 1 is wholly outside of buffer 2, return false */ if ((blockend1 < blockstart2) || /* Wholly "below" */ (blockstart1 > blockend2)) /* Wholly "above" */ { return false; } else { return true; } } /**************************************************************************** * Name: rwb_resetwrbuffer ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER static inline void rwb_resetwrbuffer(FAR struct rwbuffer_s *rwb) { /* We assume that the caller holds the wrsem */ rwb->wrnblocks = 0; rwb->wrblockstart = -1; } #endif /**************************************************************************** * Name: rwb_wrflush * * Assumptions: * The caller holds the wrsem semaphore. * ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER static void rwb_wrflush(FAR struct rwbuffer_s *rwb) { int ret; if (rwb->wrnblocks > 0) { size_t padblocks; finfo("Flushing: blockstart=0x%08lx nblocks=%d from buffer=%p\n", (long)rwb->wrblockstart, rwb->wrnblocks, rwb->wrbuffer); padblocks = rwb->wrnblocks % rwb->wralignblocks; if (padblocks) { padblocks = rwb->wralignblocks - padblocks; rwb_read_(rwb, rwb->wrblockstart + rwb->wrnblocks, padblocks, &rwb->wrbuffer[rwb->wrnblocks * rwb->blocksize]); rwb->wrnblocks += padblocks; } /* Flush cache. On success, the flush method will return the number * of blocks written. Anything other than the number requested is * an error. */ ret = rwb->wrflush(rwb->dev, rwb->wrbuffer, rwb->wrblockstart, rwb->wrnblocks); if (ret != rwb->wrnblocks) { ferr("ERROR: Error flushing write buffer: %d\n", ret); } rwb_resetwrbuffer(rwb); } } #endif /**************************************************************************** * Name: rwb_wrtimeout ****************************************************************************/ #if defined(CONFIG_DRVR_WRITEBUFFER) && CONFIG_DRVR_WRDELAY != 0 static void rwb_wrtimeout(FAR void *arg) { /* The following assumes that the size of a pointer is 4-bytes or less */ FAR struct rwbuffer_s *rwb = (FAR struct rwbuffer_s *)arg; DEBUGASSERT(rwb != NULL); finfo("Timeout!\n"); /* If a timeout elapses with write buffer activity, this watchdog * handler function will be evoked on the thread of execution of the * worker thread. */ rwb_forcetake(&rwb->wrsem); rwb_wrflush(rwb); rwb_semgive(&rwb->wrsem); } #endif /**************************************************************************** * Name: rwb_wrstarttimeout ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER static void rwb_wrstarttimeout(FAR struct rwbuffer_s *rwb) { #if CONFIG_DRVR_WRDELAY != 0 /* CONFIG_DRVR_WRDELAY provides the delay period in milliseconds. CLK_TCK * provides the clock tick of the system (frequency in Hz). */ int ticks = MSEC2TICK(CONFIG_DRVR_WRDELAY); work_queue(LPWORK, &rwb->work, rwb_wrtimeout, (FAR void *)rwb, ticks); #endif } #endif /**************************************************************************** * Name: rwb_wrcanceltimeout ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER static inline void rwb_wrcanceltimeout(FAR struct rwbuffer_s *rwb) { #if CONFIG_DRVR_WRDELAY != 0 work_cancel(LPWORK, &rwb->work); #endif } #endif /**************************************************************************** * Name: rwb_writebuffer ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER static ssize_t rwb_writebuffer(FAR struct rwbuffer_s *rwb, off_t startblock, uint32_t nblocks, FAR const uint8_t *wrbuffer) { uint32_t nwritten = nblocks; /* Write writebuffer Logic */ rwb_wrcanceltimeout(rwb); /* Is data saved in the write buffer? */ if (rwb->wrnblocks > 0) { off_t wrbend; off_t newend; /* Now there are five cases: * * 1. We update the non-overlapping region */ wrbend = rwb->wrblockstart + rwb->wrnblocks; newend = startblock + nblocks; if (wrbend < startblock || rwb->wrblockstart > newend) { /* Nothing to do */; } /* 2. We update the entire write buffer. */ else if (rwb->wrblockstart > startblock && wrbend < newend) { rwb->wrnblocks = 0; } /* We are going to update a subset of the write buffer. Three * more cases to consider: * * 3. We update a portion in the middle of the write buffer */ else if (rwb->wrblockstart <= startblock && wrbend >= newend) { FAR uint8_t *dest; size_t offset; /* Copy the data to the middle of write buffer */ offset = startblock - rwb->wrblockstart; dest = rwb->wrbuffer + offset * rwb->blocksize; memcpy(dest, wrbuffer, nblocks * rwb->blocksize); nblocks = 0; } /* 4. We upate a portion at the end of the write buffer */ else if (wrbend >= startblock && wrbend <= newend) { FAR uint8_t *dest; size_t offset; size_t ncopy; /* Copy the data from the updating region to the end * of the write buffer. */ offset = rwb->wrnblocks - (wrbend - startblock); ncopy = rwb->wrmaxblocks - offset; if (ncopy > nblocks) { ncopy = nblocks; } dest = rwb->wrbuffer + offset * rwb->blocksize; memcpy(dest, wrbuffer, ncopy * rwb->blocksize); rwb->wrnblocks = offset + ncopy; wrbuffer += ncopy * rwb->blocksize; startblock += ncopy; nblocks -= ncopy; } /* 5. We update a portion at the beginning of the write buffer */ else /* if (rwb->wrblockstart >= startblock && wrbend >= newend) */ { FAR uint8_t *dest; FAR const uint8_t *src; size_t ncopy; DEBUGASSERT(rwb->wrblockstart >= startblock && wrbend >= newend); /* Move the cached data to the end of the write buffer */ ncopy = rwb->wrblockstart - startblock; if (ncopy > rwb->wrmaxblocks - rwb->wrnblocks) { ncopy = rwb->wrmaxblocks - rwb->wrnblocks; } dest = rwb->wrbuffer + ncopy * rwb->blocksize; memmove(dest, rwb->wrbuffer, ncopy * rwb->blocksize); rwb->wrblockstart -= ncopy; rwb->wrnblocks += ncopy; /* Copy the data from the updating region to the beginning * of the write buffer. */ ncopy = newend - rwb->wrblockstart; src = wrbuffer + (nblocks - ncopy) * rwb->blocksize; memcpy(rwb->wrbuffer, src, ncopy * rwb->blocksize); nblocks -= ncopy; } } /* Use the block cache unless the buffer size is bigger than block cache */ if (nblocks > rwb->wrmaxblocks) { ssize_t ret = rwb->wrflush(rwb->dev, wrbuffer, startblock, nblocks); if (ret < 0) { return ret; } } else if (nblocks) { /* Flush the write buffer */ rwb_wrflush(rwb); /* Buffer the data in the write buffer */ memcpy(rwb->wrbuffer, wrbuffer, nblocks * rwb->blocksize); rwb->wrblockstart = startblock; rwb->wrnblocks = nblocks; } if (rwb->wrnblocks > 0) { rwb_wrstarttimeout(rwb); } return nwritten; } #endif /**************************************************************************** * Name: rwb_resetrhbuffer ****************************************************************************/ #ifdef CONFIG_DRVR_READAHEAD static inline void rwb_resetrhbuffer(FAR struct rwbuffer_s *rwb) { /* We assume that the caller holds the readAheadBufferSemphore */ rwb->rhnblocks = 0; rwb->rhblockstart = -1; } #endif /**************************************************************************** * Name: rwb_bufferread ****************************************************************************/ #ifdef CONFIG_DRVR_READAHEAD static inline void rwb_bufferread(FAR struct rwbuffer_s *rwb, off_t startblock, size_t nblocks, FAR uint8_t **rdbuffer) { FAR uint8_t *rhbuffer; /* We assume that (1) the caller holds the readAheadBufferSemphore, and (2) * that the caller already knows that all of the blocks are in the * read-ahead buffer. */ /* Convert the units from blocks to bytes */ off_t blockoffset = startblock - rwb->rhblockstart; off_t byteoffset = rwb->blocksize * blockoffset; size_t nbytes = rwb->blocksize * nblocks; /* Get the byte address in the read-ahead buffer */ rhbuffer = rwb->rhbuffer + byteoffset; /* Copy the data from the read-ahead buffer into the IO buffer */ memcpy(*rdbuffer, rhbuffer, nbytes); /* Update the caller's copy for the next address */ *rdbuffer += nbytes; } #endif /**************************************************************************** * Name: rwb_rhreload ****************************************************************************/ #ifdef CONFIG_DRVR_READAHEAD static int rwb_rhreload(FAR struct rwbuffer_s *rwb, off_t startblock) { off_t endblock; size_t nblocks; int ret; /* Check for attempts to read beyond the end of the media */ if (startblock >= rwb->nblocks) { return -ESPIPE; } /* Get the block number +1 of the last block that will fit in the * read-ahead buffer */ endblock = startblock + rwb->rhmaxblocks; /* Make sure that we don't read past the end of the device */ if (endblock > rwb->nblocks) { endblock = rwb->nblocks; } nblocks = endblock - startblock; /* Reset the read buffer */ rwb_resetrhbuffer(rwb); /* Now perform the read */ ret = rwb->rhreload(rwb->dev, rwb->rhbuffer, startblock, nblocks); if (ret == nblocks) { /* Update information about what is in the read-ahead buffer */ rwb->rhnblocks = nblocks; rwb->rhblockstart = startblock; /* The return value is not the number of blocks we asked to be * loaded. */ return nblocks; } return -EIO; } #endif /**************************************************************************** * Name: rwb_invalidate_writebuffer * * Description: * Invalidate a region of the write buffer * ****************************************************************************/ #if defined(CONFIG_DRVR_WRITEBUFFER) && defined(CONFIG_DRVR_INVALIDATE) int rwb_invalidate_writebuffer(FAR struct rwbuffer_s *rwb, off_t startblock, size_t blockcount) { int ret = OK; /* Is there a write buffer? Is data saved in the write buffer? */ if (rwb->wrmaxblocks > 0 && rwb->wrnblocks > 0) { off_t wrbend; off_t invend; finfo("startblock=%d blockcount=%p\n", startblock, blockcount); ret = rwb_semtake(&rwb->wrsem); if (ret < 0) { return ret; } /* Now there are five cases: * * 1. We invalidate nothing */ wrbend = rwb->wrblockstart + rwb->wrnblocks; invend = startblock + blockcount; if (wrbend <= startblock || rwb->wrblockstart >= invend) { ret = OK; } /* 2. We invalidate the entire write buffer. */ else if (rwb->wrblockstart >= startblock && wrbend <= invend) { rwb->wrnblocks = 0; ret = OK; } /* We are going to invalidate a subset of the write buffer. Three * more cases to consider: * * 3. We invalidate a portion in the middle of the write buffer */ else if (rwb->wrblockstart < startblock && wrbend > invend) { FAR uint8_t *src; off_t block; off_t offset; size_t nblocks; /* Write the blocks at the end of the media to hardware */ nblocks = wrbend - invend; block = invend; offset = block - rwb->wrblockstart; src = rwb->wrbuffer + offset * rwb->blocksize; ret = rwb->wrflush(rwb->dev, src, block, nblocks); if (ret < 0) { ferr("ERROR: wrflush failed: %d\n", ret); } /* Keep the blocks at the beginning of the buffer up the * start of the invalidated region. */ else { rwb->wrnblocks = startblock - rwb->wrblockstart; ret = OK; } } /* 4. We invalidate a portion at the end of the write buffer */ else if (wrbend > startblock && wrbend <= invend) { rwb->wrnblocks -= wrbend - startblock; ret = OK; } /* 5. We invalidate a portion at the beginning of the write buffer */ else /* if (rwb->wrblockstart >= startblock && wrbend > invend) */ { FAR uint8_t *src; size_t ninval; size_t nkeep; DEBUGASSERT(rwb->wrblockstart >= startblock && wrbend > invend); /* Copy the data from the uninvalidated region to the beginning * of the write buffer. * * First calculate the source and destination of the transfer. */ ninval = invend - rwb->wrblockstart; src = rwb->wrbuffer + ninval * rwb->blocksize; /* Calculate the number of blocks we are keeping. We keep * the ones that we don't invalidate. */ nkeep = rwb->wrnblocks - ninval; /* Then move the data that we are keeping to the beginning * the write buffer. */ memcpy(rwb->wrbuffer, src, nkeep * rwb->blocksize); /* Update the block info. The first block is now the one just * after the invalidation region and the number buffered blocks * is the number that we kept. */ rwb->wrblockstart = invend; rwb->wrnblocks = nkeep; ret = OK; } rwb_semgive(&rwb->wrsem); } return ret; } #endif /**************************************************************************** * Name: rwb_invalidate_readahead * * Description: * Invalidate a region of the read-ahead buffer * ****************************************************************************/ #if defined(CONFIG_DRVR_READAHEAD) && defined(CONFIG_DRVR_INVALIDATE) int rwb_invalidate_readahead(FAR struct rwbuffer_s *rwb, off_t startblock, size_t blockcount) { int ret = OK; if (rwb->rhmaxblocks > 0 && rwb->rhnblocks > 0) { off_t rhbend; off_t invend; finfo("startblock=%d blockcount=%p\n", startblock, blockcount); ret = rwb_semtake(&rwb->rhsem); if (ret < 0) { return ret; } /* Now there are five cases: * * 1. We invalidate nothing */ rhbend = rwb->rhblockstart + rwb->rhnblocks; invend = startblock + blockcount; if (rhbend <= startblock || rwb->rhblockstart >= invend) { ret = OK; } /* 2. We invalidate the entire read-ahead buffer. */ else if (rwb->rhblockstart >= startblock && rhbend <= invend) { rwb->rhnblocks = 0; ret = OK; } /* We are going to invalidate a subset of the read-ahead buffer. * Three more cases to consider: * * 2. We invalidate a portion in the middle of the read-ahead buffer */ else if (rwb->rhblockstart < startblock && rhbend > invend) { /* Keep the blocks at the beginning of the buffer up the * start of the invalidated region. */ rwb->rhnblocks = startblock - rwb->rhblockstart; ret = OK; } /* 3. We invalidate a portion at the end of the read-ahead buffer */ else if (rhbend > startblock && rhbend <= invend) { rwb->rhnblocks -= rhbend - startblock; ret = OK; } /* 4. We invalidate a portion at the begin of the read-ahead buffer */ else /* if (rwb->rhblockstart >= startblock && rhbend > invend) */ { FAR uint8_t *src; size_t ninval; size_t nkeep; DEBUGASSERT(rwb->rhblockstart >= startblock && rhbend > invend); /* Copy the data from the uninvalidated region to the beginning * of the read buffer. * * First calculate the source and destination of the transfer. */ ninval = invend - rwb->rhblockstart; src = rwb->rhbuffer + ninval * rwb->blocksize; /* Calculate the number of blocks we are keeping. We keep * the ones that we don't invalidate. */ nkeep = rwb->rhnblocks - ninval; /* Then move the data that we are keeping to the beginning * the read buffer. */ memmove(rwb->rhbuffer, src, nkeep * rwb->blocksize); /* Update the block info. The first block is now the one just * after the invalidation region and the number buffered blocks * is the number that we kept. */ rwb->rhblockstart = invend; rwb->rhnblocks = nkeep; } rwb_semgive(&rwb->rhsem); } return ret; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: rwb_initialize ****************************************************************************/ int rwb_initialize(FAR struct rwbuffer_s *rwb) { uint32_t allocsize; /* Sanity checking */ DEBUGASSERT(rwb != NULL); DEBUGASSERT(rwb->blocksize > 0); DEBUGASSERT(rwb->nblocks > 0); DEBUGASSERT(rwb->dev != NULL); /* Setup so that rwb_uninitialize can handle a failure */ #ifdef CONFIG_DRVR_WRITEBUFFER DEBUGASSERT(rwb->wrflush != NULL); rwb->wrbuffer = NULL; #endif #ifdef CONFIG_DRVR_READAHEAD DEBUGASSERT(rwb->rhreload != NULL); rwb->rhbuffer = NULL; #endif #ifdef CONFIG_DRVR_WRITEBUFFER if (rwb->wrmaxblocks > 0) { finfo("Initialize the write buffer\n"); if (rwb->wralignblocks == 0) { rwb->wralignblocks = 1; } DEBUGASSERT(rwb->wralignblocks <= rwb->wrmaxblocks && rwb->wrmaxblocks % rwb->wralignblocks == 0); /* Initialize the write buffer access semaphore */ nxsem_init(&rwb->wrsem, 0, 1); /* Initialize write buffer parameters */ rwb_resetwrbuffer(rwb); /* Allocate the write buffer */ allocsize = rwb->wrmaxblocks * rwb->blocksize; rwb->wrbuffer = kmm_malloc(allocsize); if (!rwb->wrbuffer) { ferr("Write buffer kmm_malloc(%d) failed\n", allocsize); return -ENOMEM; } finfo("Write buffer size: %d bytes\n", allocsize); } #endif /* CONFIG_DRVR_WRITEBUFFER */ #ifdef CONFIG_DRVR_READAHEAD if (rwb->rhmaxblocks > 0) { finfo("Initialize the read-ahead buffer\n"); /* Initialize the read-ahead buffer access semaphore */ nxsem_init(&rwb->rhsem, 0, 1); /* Initialize read-ahead buffer parameters */ rwb_resetrhbuffer(rwb); /* Allocate the read-ahead buffer */ allocsize = rwb->rhmaxblocks * rwb->blocksize; rwb->rhbuffer = kmm_malloc(allocsize); if (!rwb->rhbuffer) { ferr("Read-ahead buffer kmm_malloc(%d) failed\n", allocsize); return -ENOMEM; } finfo("Read-ahead buffer size: %d bytes\n", allocsize); } #endif /* CONFIG_DRVR_READAHEAD */ return OK; } /**************************************************************************** * Name: rwb_uninitialize ****************************************************************************/ void rwb_uninitialize(FAR struct rwbuffer_s *rwb) { #ifdef CONFIG_DRVR_WRITEBUFFER if (rwb->wrmaxblocks > 0) { rwb_wrcanceltimeout(rwb); rwb_wrflush(rwb); nxsem_destroy(&rwb->wrsem); if (rwb->wrbuffer) { kmm_free(rwb->wrbuffer); } } #endif #ifdef CONFIG_DRVR_READAHEAD if (rwb->rhmaxblocks > 0) { nxsem_destroy(&rwb->rhsem); if (rwb->rhbuffer) { kmm_free(rwb->rhbuffer); } } #endif } /**************************************************************************** * Name: rwb_read_ ****************************************************************************/ static ssize_t rwb_read_(FAR struct rwbuffer_s *rwb, off_t startblock, size_t nblocks, FAR uint8_t *rdbuffer) { int ret = OK; #ifdef CONFIG_DRVR_READAHEAD if (rwb->rhmaxblocks > 0) { size_t remaining; ret = nxsem_wait(&rwb->rhsem); if (ret < 0) { return ret; } /* Loop until we have read all of the requested blocks */ for (remaining = nblocks; remaining > 0; ) { /* Is there anything in the read-ahead buffer? */ if (rwb->rhnblocks > 0) { off_t bufferend; /* How many blocks are available in this buffer? */ bufferend = rwb->rhblockstart + rwb->rhnblocks; if (startblock >= rwb->rhblockstart && startblock < bufferend) { size_t rdblocks = bufferend - startblock; if (rdblocks > remaining) { rdblocks = remaining; } /* Then read the data from the read-ahead buffer */ rwb_bufferread(rwb, startblock, rdblocks, &rdbuffer); startblock += rdblocks; remaining -= rdblocks; } } /* If we did not get all of the data from the buffer, then we have * to refill the buffer and try again. */ if (remaining > 0) { ret = rwb_rhreload(rwb, startblock); if (ret < 0) { ferr("ERROR: Failed to fill the read-ahead buffer: %d\n", ret); rwb_semgive(&rwb->rhsem); return ret; } } } /* On success, return the number of blocks that we were requested to * read. This is for compatibility with the normal return of a block * driver read method */ rwb_semgive(&rwb->rhsem); ret = nblocks; } else #endif { /* No read-ahead buffering, (re)load the data directly into * the user buffer. */ ret = rwb->rhreload(rwb->dev, rdbuffer, startblock, nblocks); } return ret; } /**************************************************************************** * Name: rwb_read ****************************************************************************/ ssize_t rwb_read(FAR struct rwbuffer_s *rwb, off_t startblock, size_t nblocks, FAR uint8_t *rdbuffer) { int ret = OK; size_t readblocks = 0; finfo("startblock=%ld nblocks=%ld rdbuffer=%p\n", (long)startblock, (long)nblocks, rdbuffer); #ifdef CONFIG_DRVR_WRITEBUFFER /* If the new read data overlaps any part of the write buffer, we * directly copy write buffer to read buffer. This boost performance. */ if (rwb->wrmaxblocks > 0) { ret = nxsem_wait(&rwb->wrsem); if (ret < 0) { return ret; } /* If the write buffer overlaps the block(s) requested */ if (rwb_overlap(rwb->wrblockstart, rwb->wrnblocks, startblock, nblocks)) { size_t rdblocks = 0; size_t wrnpass = 0; if (rwb->wrblockstart > startblock) { rdblocks = rwb->wrblockstart - startblock; ret = rwb_read_(rwb, startblock, rdblocks, rdbuffer); if (ret < 0) { rwb_semgive(&rwb->wrsem); return ret; } startblock += ret; nblocks -= ret; rdbuffer += ret * rwb->blocksize; readblocks += ret; } if (rwb->wrblockstart < startblock) { wrnpass = startblock - rwb->wrblockstart; } rdblocks = nblocks > (rwb->wrnblocks - wrnpass) ? (rwb->wrnblocks - wrnpass) : nblocks; memcpy(rdbuffer, &rwb->wrbuffer[wrnpass * rwb->blocksize], rdblocks * rwb->blocksize); startblock += rdblocks; nblocks -= rdblocks; rdbuffer += rdblocks * rwb->blocksize; readblocks += rdblocks; } rwb_semgive(&rwb->wrsem); } #endif ret = rwb_read_(rwb, startblock, nblocks, rdbuffer); if (ret < 0) { return ret; } return readblocks + ret; } /**************************************************************************** * Name: rwb_write ****************************************************************************/ ssize_t rwb_write(FAR struct rwbuffer_s *rwb, off_t startblock, size_t nblocks, FAR const uint8_t *wrbuffer) { int ret = OK; #ifdef CONFIG_DRVR_READAHEAD if (rwb->rhmaxblocks > 0) { /* If the new write data overlaps any part of the read buffer, then * flush the data from the read buffer. We could attempt some more * exotic handling -- but this simple logic is well-suited for simple * streaming applications. */ ret = nxsem_wait(&rwb->rhsem); if (ret < 0) { return ret; } if (rwb_overlap(rwb->rhblockstart, rwb->rhnblocks, startblock, nblocks)) { #ifdef CONFIG_DRVR_INVALIDATE /* Just invalidate the read buffer startblock + nblocks data */ ret = rwb_invalidate_readahead(rwb, startblock, nblocks); if (ret < 0) { ferr("ERROR: rwb_invalidate_readahead failed: %d\n", ret); rwb_semgive(&rwb->rhsem); return ret; } #else rwb_resetrhbuffer(rwb); #endif } rwb_semgive(&rwb->rhsem); } #endif #ifdef CONFIG_DRVR_WRITEBUFFER if (rwb->wrmaxblocks > 0) { finfo("startblock=%d wrbuffer=%p\n", startblock, wrbuffer); ret = nxsem_wait(&rwb->wrsem); if (ret < 0) { return ret; } ret = rwb_writebuffer(rwb, startblock, nblocks, wrbuffer); rwb_semgive(&rwb->wrsem); /* On success, return the number of blocks that we were requested to * write. This is for compatibility with the normal return of a block * driver write method */ } else #endif /* CONFIG_DRVR_WRITEBUFFER */ { /* No write buffer.. just pass the write operation through via the * flush callback. */ ret = rwb->wrflush(rwb->dev, wrbuffer, startblock, nblocks); } return ret; } /**************************************************************************** * Name: rwb_readbytes * * Description: * Character-oriented read * ****************************************************************************/ #ifdef CONFIG_DRVR_READBYTES ssize_t rwb_readbytes(FAR struct rwbuffer_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buffer) { /* Loop while there are bytes still be be read */ /* Make sure that the sector containing the next bytes to transfer is in * memory. */ /* How many bytes can be transfer from the in-memory data? */ /* Transfer the bytes */ /* Adjust counts and offsets for the next time through the loop */ #warning Not Implemented return -ENOSYS; } #endif /**************************************************************************** * Name: rwb_mediaremoved * * Description: * The following function is called when media is removed * ****************************************************************************/ #ifdef CONFIG_DRVR_REMOVABLE int rwb_mediaremoved(FAR struct rwbuffer_s *rwb) { #ifdef CONFIG_DRVR_WRITEBUFFER if (rwb->wrmaxblocks > 0) { ret = rwb_semtake(&rwb->wrsem); if (ret < 0) { return ret; } rwb_resetwrbuffer(rwb); rwb_semgive(&rwb->wrsem); } #endif #ifdef CONFIG_DRVR_READAHEAD if (rwb->rhmaxblocks > 0) { ret = rwb_semtake(&rwb->rhsem); if (ret < 0) { return ret; } rwb_resetrhbuffer(rwb); rwb_semgive(&rwb->rhsem); } #endif return OK; } #endif /**************************************************************************** * Name: rwb_invalidate * * Description: * Invalidate a region of the caches * ****************************************************************************/ #ifdef CONFIG_DRVR_INVALIDATE int rwb_invalidate(FAR struct rwbuffer_s *rwb, off_t startblock, size_t blockcount) { int ret; #ifdef CONFIG_DRVR_WRITEBUFFER ret = rwb_invalidate_writebuffer(rwb, startblock, blockcount); if (ret < 0) { ferr("ERROR: rwb_invalidate_writebuffer failed: %d\n", ret); return ret; } #endif #ifdef CONFIG_DRVR_READAHEAD ret = rwb_invalidate_readahead(rwb, startblock, blockcount); if (ret < 0) { ferr("ERROR: rwb_invalidate_readahead failed: %d\n", ret); return ret; } #endif return OK; } #endif /**************************************************************************** * Name: rwb_flush * * Description: * Flush the write buffer * ****************************************************************************/ #ifdef CONFIG_DRVR_WRITEBUFFER int rwb_flush(FAR struct rwbuffer_s *rwb) { int ret; ret = rwb_forcetake(&rwb->wrsem); rwb_wrcanceltimeout(rwb); rwb_wrflush(rwb); rwb_semgive(&rwb->wrsem); return ret; } #endif #endif /* CONFIG_DRVR_WRITEBUFFER || CONFIG_DRVR_READAHEAD */