# # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # menuconfig ANALOG bool "Analog Device(ADC/DAC) Support" default n ---help--- This directory holds implementations of analog device drivers. This includes drivers for Analog to Digital Conversion (ADC) as well as drivers for Digital to Analog Conversion (DAC). See include/nuttx/analog/*.h for registration information. if ANALOG config ADC bool "Analog-to-Digital Conversion" default n ---help--- Select to enable support for analog input device support. This includes not only Analog-to-Digital Converters (ADC) but also amplifiers and analog multiplexers. This selection enables: - The upper half, device-independent ADC character driver, and - Selection of common lower half ADC drivers. MCU-specific, lower half drivers may be selected independently of CONFIG_ADC. However, if CONFIG_ADC is selected, then it is assume that lower half ADC drivers will be used only with the common ADC upper half driver. if ADC config ADC_FIFOSIZE int "ADC buffer size" default 8 ---help--- This variable defines the size of the ADC ring buffer that is used to queue received ADC data until they can be retrieved by the application by reading from the ADC character device. NOTE: Since this is a ring buffer, the actual number of bytes that can be retained in buffer is (ADC_FIFOSIZE - 1). config ADC_NPOLLWAITERS int "Number of poll waiters" default 2 ---help--- Maximum number of threads that can be waiting on poll. config ADC_ADS1242 bool "TI ADS1242 support" default n select SPI ---help--- Enable driver support for the ADS1242 24-Bit SPI powered ADC. This driver supports reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface. config ADC_ADS125X bool "TI ADS1255/ADS1256 support" default n select SPI select SCHED_HPWORK depends on ALLOW_BSD_COMPONENTS if ADC_ADS125X config ADS1255_FREQUENCY int "ADS1255/ADS1256 SPI frequency" default 1000000 endif # ADC_ADS125X config ADC_LTC1867L bool "LTC 1863L/1867L support" default n select SPI ---help--- Enable driver support for the LTC 1863L (12 bit) and LTC 1867L (16 bit) SPI powered ADC. Note that the ADC conversion is started via the ANIOC_TRIGGER iotcl. if ADC_LTC1867L config LTC1867L_FREQUENCY int "LTC 1863L/1867L SPI frequency" default 1000000 ---help--- LTC 1863L/1867L SPI frequency. Maximum is 20 MHz. endif # ADC_LTC1867L config ADC_PGA11X bool "TI PGA112/3/6/7 support" default n select SPI ---help--- Enables support for the PGA112, PGA113, PGA116, PGA117 Zero-Drift PROGRAMMABLE GAIN AMPLIFIER with MUX if ADC_PGA11X config PGA11X_SPIFREQUENCY int "TI PGA112/3/6/7 SPI frequency" default 1000000 ---help--- PGA11x SPI frequency. config PGA11X_SPIMODE int "TI PGA112/3/6/7 SPI mode" default 0 ---help--- PGA11x SPI mode. The specification says that the device operates in Mode 0 or Mode 3. But sometimes you need to tinker with this to get things to work correctly. Default: Mode 0 config PGA11X_DAISYCHAIN bool "TI PGA112/3/6/7 daisy chain mode" default n ---help--- Enable support to use two PGA116/7's in Daisy Chain configuration. config PGA11X_MULTIPLE bool "Multiple TI PGA112/3/6/7 support" default n depends on !PGA11X_DAISYCHAIN ---help--- Can be defined to support multiple PGA11X devices on board with separate chip selects (not daisy chained). Each device will require a customized SPI interface to distinguish them when SPI_SELECT is called with devid=SPIDEV_MUX(n). endif # if ADC_PGA11X config ADC_ADS7828 bool "TI ADS7828 support" default n select I2C ---help--- Enable driver support for the ADS7828 12-Bit I2C powered ADC. This driver supports reading single or multiple ADC conversion result as well as onfiguring the ADC, via ioctl calls. if ADC_ADS7828 config ADS7828_FREQUENCY int "TI ADS7828 I2C frequency" default 100000 ---help--- ADS7828 supports standard, fast, and high-speed I2C modes. endif # ADC_ADS7828 config ADC_MAX1161X bool "Maxim MAX11612-11617 support" default n select I2C ---help--- Enable driver support for the MAX1161X 12-Bit I2C powered ADC Family. This driver supports reading single or multiple ADC conversion result as well as onfiguring the ADC, via ioctl calls. if ADC_MAX1161X config MAX1161X_FREQUENCY int "Maxim MAX1161X I2C frequency" default 100000 ---help--- MAX1161X supports standard, fast, and high-speed I2C modes. choice prompt "Maxim MAX1161X Chip Type" config MAX1161X_4CHAN bool "MAX11612/MAX11613 4 Channels" config MAX1161X_8CHAN bool "MAX11614/MAX11615 8 Channels" config MAX1161X_12CHAN bool "MAX11616/MAX11617 12 Channels" endchoice endif # ADC_MAX1161X config ADC_HX711 bool "Avia Semiconductor HX711 support" default n ---help--- Enable driver to support Avia Semiconductor HX711 ADC designed for weight scales. Driver supports both 'a' and 'b' channels with 32, 64 and 128 gain. Driver does not support continuous read and is not buffered. Driver uses interrupts to not hog the CPU while waiting for hx711 to be ready. if ADC_HX711 config ADC_HA711_ADD_DELAY bool "Add 1us delay between clock pulses" default y if BOARD_LOOPSPERMSEC >= 15000 ---help--- HX711 requires about 1us between clock pulses to work. This is not an issue on slower chips, but faster chips will most likely try to clock HX711 too fast, which will result in data lose. If this is enabled, code will insert 1us of delay to each clock change. Enable this only if you get data lose, or else you will just introduce unnecessary delay to your program. Best way to know if you need this, is to compile HX711 demo program and run it. If there are no errors reported during runtime, you can turn this of. If you see communication errors, then you should enable this. endif # ADC_HX711 endif # ADC config COMP bool "Analog Comparator" default n ---help--- Select to enable support for Analog Comparators (COMPs). config DAC bool "Digital-to-Analog Conversion" default n ---help--- Select to enable support for Digital-to-Analog Converters (DACs). if DAC config DAC_AD5410 bool "AD5410 support" default n depends on ALLOW_BSD_COMPONENTS select SPI config DAC7571 bool "DAC7571 support" default n select I2C ---help--- Enable driver support for the Texas Instruments DAC7571 dac. config DAC7571_I2C_FREQUENCY int "DAC7571 I2C frequency" default 400000 depends on DAC7571 config DAC7554 bool "DAC7554 support" default n select SPI ---help--- Enable driver support for the Texas Instruments DAC7554 dac. config MCP48XX bool "MCP4802/4812/4822 support" default n select SPI ---help--- Enable driver support for the Microchip MCP4802/4812/4822 dac. choice prompt "MCP48XX variant" default MCP4802 depends on MCP48XX config MCP4802 bool "MCP4802 (8-bit) dac" config MCP4812 bool "MCP4812 (10-bit) dac" config MCP4822 bool "MCP4822 (12-bit) dac" endchoice # MCP48XX variant config MCP48XX_SPI_FREQUENCY int "MCP48XX SPI frequency" default 4000000 depends on MCP48XX endif # DAC config OPAMP bool "Operational Amplifier" default n ---help--- Select to enable support for Operational Amplifiers (OPAMPs). config LMP92001 bool "LMP92001 support" default n select I2C ---help--- Enable driver support for the Texas Instruments LMP92001. config LMP92001_I2C_FREQUENCY int "LMP92001 I2C frequency" default 400000 depends on LMP92001 endif # ANALOG