/**************************************************************************** * drivers/lcd/lpm013m091a.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Display resolution */ #define LPM013M091A_XRES 320 #define LPM013M091A_YRES 300 /* TODO: Stride should be configurable by LCD orientation */ #define LPM013M091A_STRIDE LPM013M091A_XRES /* Dolor depth and format */ #define LPM013M091A_BPP 16 #define LPM013M091A_COLORFMT FB_FMT_RGB16_565 /**************************************************************************** * Private types ****************************************************************************/ struct lpm013m091a_dev_s { /* Publicly visible device structure */ struct lcd_dev_s dev; /* Private lcd-specific information follows */ struct lpm013m091a_lcd_s *lcd; uint8_t power; /* Current power setting */ }; /**************************************************************************** * Private Function Protototypes ****************************************************************************/ static void lpm013m091a_selectarea(FAR struct lpm013m091a_lcd_s *lcd, uint16_t x0, int16_t y0, uint16_t x1, int16_t y1); static int lpm013m091a_hwinitialize(FAR struct lpm013m091a_dev_s *dev); /* lcd data transfer methods */ static int lpm013m091a_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, size_t npixels); #ifndef CONFIG_LCD_NOGETRUN static int lpm013m091a_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, size_t npixels); #endif /* lcd configuration */ static int lpm013m091a_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo); static int lpm013m091a_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo); /* lcd specific controls */ static int lpm013m091a_getpower(FAR struct lcd_dev_s *dev); static int lpm013m091a_setpower(FAR struct lcd_dev_s *dev, int power); static int lpm013m091a_getcontrast(FAR struct lcd_dev_s *dev); static int lpm013m091a_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast); /**************************************************************************** * Private Data ****************************************************************************/ static uint16_t g_runbuffer[LPM013M091A_STRIDE]; /* This structure describes the overall lcd video controller */ static const struct fb_videoinfo_s g_videoinfo = { .fmt = LPM013M091A_COLORFMT, /* Color format: rgb16-565: rrrr rggg gggb bbbb */ .xres = LPM013M091A_XRES, /* Horizontal resolution in pixel columns */ .yres = LPM013M091A_YRES, /* Vertical resolution in pixel rows */ .nplanes = 1, /* Number of color planes supported */ }; /* This is the standard, nuttx plane information object */ static const struct lcd_planeinfo_s g_planeinfo = { .putrun = lpm013m091a_putrun, /* Put a run into lcd memory */ #ifndef CONFIG_LCD_NOGETRUN .getrun = lpm013m091a_getrun, /* Get a run from lcd memory */ #endif .buffer = (uint8_t *) g_runbuffer, /* Run scratch buffer */ .bpp = LPM013M091A_BPP, /* Bits-per-pixel */ }; static struct lpm013m091a_dev_s g_lpm013m091a_dev = { .dev = { /* lcd configuration */ .getvideoinfo = lpm013m091a_getvideoinfo, .getplaneinfo = lpm013m091a_getplaneinfo, /* lcd specific controls */ .getpower = lpm013m091a_getpower, .setpower = lpm013m091a_setpower, .getcontrast = lpm013m091a_getcontrast, .setcontrast = lpm013m091a_setcontrast, }, .lcd = 0, }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lpm013m091a_selectarea * * Description: * Select the active area for displaying pixel * * Parameter: * lcd - Reference to private driver structure * x0 - Start x position * y0 - Start y position * x1 - End x position * y1 - End y position * ****************************************************************************/ static void lpm013m091a_selectarea(FAR struct lpm013m091a_lcd_s *lcd, uint16_t x0, int16_t y0, uint16_t x1, int16_t y1) { lcd->sendcmd(lcd, LPM013M091A_CASET); lcd->sendparam(lcd, x0 >> 8); lcd->sendparam(lcd, x0 & 0xff); lcd->sendparam(lcd, x1 >> 8); lcd->sendparam(lcd, x1 & 0xff); lcd->sendcmd(lcd, LPM013M091A_PASET); lcd->sendparam(lcd, y0 >> 8); lcd->sendparam(lcd, y0 & 0xff); lcd->sendparam(lcd, y1 >> 8); lcd->sendparam(lcd, y1 & 0xff); } /**************************************************************************** * Name: lpm013m091a_hwinitialize * * Description: * Initialize and configure the LPM013M091A LCD driver hardware. * * Parameter: * dev - A reference to the driver specific structure * * Returned Value: * * On success - OK * On error - EINVAL * ****************************************************************************/ static int lpm013m091a_hwinitialize(FAR struct lpm013m091a_dev_s *dev) { FAR struct lpm013m091a_lcd_s *lcd = dev->lcd; /* Soft reset */ lcd->sendcmd(lcd, LPM013M091A_SWRESET); up_mdelay(10); /* Analog mode */ lcd->sendcmd(lcd, 0xb3); lcd->sendparam(lcd, 0x02); /* Set Display Mode */ lcd->sendcmd(lcd, 0xbb); lcd->sendparam(lcd, 0x10); /* SPI GRAM access enable */ lcd->sendcmd(lcd, 0xf3); lcd->sendparam(lcd, 0x02); /* Bright Level Max */ lcd->sendcmd(lcd, 0x51); lcd->sendparam(lcd, 0xff); /* Backlight ON */ lcd->sendcmd(lcd, 0x53); lcd->sendparam(lcd, 0x24); /* Frame rate 60Hz */ lcd->sendcmd(lcd, 0xff); lcd->sendparam(lcd, 0x24); lcd->sendcmd(lcd, 0xd8); lcd->sendparam(lcd, 0x41); lcd->sendcmd(lcd, 0xd9); lcd->sendparam(lcd, 0x1e); lcd->sendcmd(lcd, 0xff); lcd->sendparam(lcd, 0x10); /* Set the color format (18bit:0x06, 16bit:0x05) */ lcd->sendcmd(lcd, LPM013M091A_PIXFMT); lcd->sendparam(lcd, 0x05); /* Sleep out */ lcd->sendcmd(lcd, LPM013M091A_SLPOUT); up_mdelay(10); /* Display on */ lcd->sendcmd(lcd, LPM013M091A_DISPON); up_mdelay(120); return OK; } /**************************************************************************** * Name: lpm013m091a_putrun * * Description: * Write a partial raster line to the LCD. * * Parameters: * devno - Number of lcd device * row - Starting row to write to (range: 0 <= row < yres) * col - Starting column to write to (range: 0 <= col <= xres-npixels) * buffer - The buffer containing the run to be written to the LCD * npixels - The number of pixels to write to the * (range: 0 < npixels <= xres-col) * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ static int lpm013m091a_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, size_t npixels) { FAR struct lpm013m091a_dev_s *dev = (FAR struct lpm013m091a_dev_s *) &g_lpm013m091a_dev; FAR struct lpm013m091a_lcd_s *lcd = dev->lcd; FAR const uint16_t *src = (FAR const uint16_t *)buffer; DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0); /* Check if position outside of area */ if (col + npixels > LPM013M091A_XRES || row > LPM013M091A_YRES) { return -EINVAL; } /* Select lcd driver */ lcd->select(lcd); /* Select column and area similar to the partial raster line */ lpm013m091a_selectarea(lcd, col, row, col + npixels - 1, row); /* Send memory write cmd */ lcd->sendcmd(lcd, LPM013M091A_RAMWR); /* Send pixel to gram */ lcd->sendgram(lcd, src, npixels); /* Deselect the lcd driver */ lcd->deselect(lcd); return OK; } /**************************************************************************** * Name: lpm013m091a_getrun * * Description: * Read a partial raster line from the LCD. * * Parameter: * devno - Number of the lcd device * row - Starting row to read from (range: 0 <= row < yres) * col - Starting column to read read (range: 0 <= col <= xres-npixels) * buffer - The buffer in which to return the run read from the LCD * npixels - The number of pixels to read from the LCD * (range: 0 < npixels <= xres-col) * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ #ifndef CONFIG_LCD_NOGETRUN int lpm013m091a_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t * buffer, size_t npixels) { lcderr("getrun is not supported for now.\n"); return -ENOSYS; } #endif /**************************************************************************** * Name: lpm013m091a_getvideoinfo * * Description: * Get information about the LCD video controller configuration. * * Parameter: * dev - A reference to the driver specific structure * vinfo - A reference to the videoinfo structure * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ static int lpm013m091a_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo) { if (dev && vinfo) { memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s)); lcdinfo("fmt: %d xres: %d yres: %d nplanes: %d\n", vinfo->fmt, vinfo->xres, vinfo->yres, vinfo->nplanes); return OK; } return -EINVAL; } /**************************************************************************** * Name: lpm013m091a_getplaneinfo * * Description: * Get information about the configuration of each LCD color plane. * * Parameter: * dev - A reference to the driver specific structure * planeno - The plane number * pinfo - A reference to the planeinfo structure * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ static int lpm013m091a_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo) { if (dev && pinfo && planeno == 0) { memcpy(pinfo, &g_planeinfo, sizeof(struct lcd_planeinfo_s)); lcdinfo("planeno: %d bpp: %d\n", planeno, pinfo->bpp); return OK; } return -EINVAL; } /**************************************************************************** * Name: lpm013m091a_getpower * * Description: * Get the LCD panel power status * 0: full off - CONFIG_LCD_MAXPOWER: full on. * On backlit LCDs, this setting may correspond to the backlight setting. * * Parameter: * dev - A reference to the driver specific structure * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ static int lpm013m091a_getpower(FAR struct lcd_dev_s *dev) { FAR struct lpm013m091a_dev_s *priv = (FAR struct lpm013m091a_dev_s *)dev; lcdinfo("%d\n", priv->power); return priv->power; } /**************************************************************************** * Name: lpm013m091a_setpower * * Description: * Enable/disable LCD panel power * (0: full off - CONFIG_LCD_MAXPOWER: full on). * On backlight LCDs, this setting may correspond to the backlight setting. * * Parameter: * dev - A reference to the driver specific structure * power - Value of the power * * Returned Value: * * On success - OK * On error - -EINVAL * ****************************************************************************/ static int lpm013m091a_setpower(FAR struct lcd_dev_s *dev, int power) { FAR struct lpm013m091a_dev_s *priv = (FAR struct lpm013m091a_dev_s *)dev; FAR struct lpm013m091a_lcd_s *lcd = priv->lcd; if (!dev) { return -EINVAL; } lcdinfo("%d\n", power); lcd->select(lcd); if (power > 0) { lcd->backlight(lcd, power); lcd->sendcmd(lcd, LPM013M091A_DISPON); up_mdelay(120); } else { lcd->sendcmd(lcd, LPM013M091A_DISPOFF); } lcd->deselect(lcd); priv->power = power; return OK; } /**************************************************************************** * Name: ili9340_getcontrast * * Description: * Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST). * * Parameter: * dev - A reference to the lcd driver structure * * Returned Value: * * On success - current contrast value * On error - -ENOSYS, not supported by the ili9340. * ****************************************************************************/ static int lpm013m091a_getcontrast(FAR struct lcd_dev_s *dev) { lcdinfo("Not implemented\n"); return -ENOSYS; } /**************************************************************************** * Name: ili9340_setcontrast * * Description: * Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST). * * Parameter: * dev - A reference to the lcd driver structure * * Returned Value: * * On success - OK * On error - -ENOSYS, not supported by the ili9340. * ****************************************************************************/ static int lpm013m091a_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast) { lcdinfo("Not implemented\n"); return -ENOSYS; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Initialize LCD ****************************************************************************/ FAR struct lcd_dev_s * lpm013m091a_initialize(FAR struct lpm013m091a_lcd_s *lcd, int devno) { FAR struct lpm013m091a_dev_s *priv = &g_lpm013m091a_dev; if (lcd && devno == 0) { if (!priv->lcd) { FAR struct lcd_dev_s *dev = &priv->dev; int ret; /* Initialize internal structure */ dev->getvideoinfo = lpm013m091a_getvideoinfo; dev->getplaneinfo = lpm013m091a_getplaneinfo; dev->getpower = lpm013m091a_getpower; dev->setpower = lpm013m091a_setpower; dev->getcontrast = lpm013m091a_getcontrast; dev->setcontrast = lpm013m091a_setcontrast; priv->lcd = lcd; /* Initialize the LCD driver */ ret = lpm013m091a_hwinitialize(priv); if (ret == OK) { return &priv->dev; } } } return NULL; }