/**************************************************************************** * drivers/syslog/syslog_intbuffer.c * * Copyright (C) 2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "syslog.h" #ifdef CONFIG_SYSLOG_INTBUFFER /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Extend the size of the interrupt buffer so that a "[truncated]\n" * indication can be append to the end. * * The usable capacity of the interrupt buffer is (CONFIG_SYSLOG_INTBUFSIZE - 1). */ #define SYSLOG_BUFOVERRUN_MESSAGE "[truncated]\n" #define SYSLOG_BUFOVERRUN_SIZE 13 #if CONFIG_SYSLOG_INTBUFSIZE > (65535 - SYSLOG_BUFOVERRUN_SIZE) # undef CONFIG_SYSLOG_INTBUFSIZE # define CONFIG_SYSLOG_INTBUFSIZE (65535 - SYSLOG_BUFOVERRUN_SIZE) # define SYSLOG_INTBUFSIZE 65535 #else # define SYSLOG_INTBUFSIZE \ (CONFIG_SYSLOG_INTBUFSIZE + SYSLOG_BUFOVERRUN_SIZE) #endif #define USABLE_INTBUFSIZE (CONFIG_SYSLOG_INTBUFSIZE - 1) /**************************************************************************** * Private Types ****************************************************************************/ /* This structure encapsulates the interrupt buffer state */ struct g_syslog_intbuffer_s { volatile uint16_t si_inndx; volatile uint16_t si_outndx; uint8_t si_buffer[SYSLOG_INTBUFSIZE]; }; /**************************************************************************** * Private Data ****************************************************************************/ static struct g_syslog_intbuffer_s g_syslog_intbuffer; static const char g_overrun_msg[SYSLOG_BUFOVERRUN_SIZE] = SYSLOG_BUFOVERRUN_MESSAGE; /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Name: syslog_remove_intbuffer * * Description: * Extract any characters that may have been added to the interrupt buffer * to the SYSLOG device. * * Input Parameters: * None * * Returned Value: * On success, the extracted character is returned. EOF is returned if * the interrupt buffer is empty. * * Assumptions: * Interrupts may or may not be disabled. * ****************************************************************************/ int syslog_remove_intbuffer(void) { irqstate_t flags; uint32_t inndx; uint32_t outndx; uint32_t endndx; int inuse = 0; int ch; /* Extraction of the character and adjustment of the circular buffer * indices must be performed in a critical section to protect from * concurrent modification from interrupt handlers. */ flags = enter_critical_section(); /* How much space is left in the inbuffer? */ inndx = (uint32_t)g_syslog_intbuffer.si_inndx; outndx = (uint32_t)g_syslog_intbuffer.si_outndx; if (inndx != outndx) { /* Handle the case where the endndx has wrapped around */ endndx = outndx; if (endndx < outndx) { endndx += SYSLOG_INTBUFSIZE; } inuse = (int)(endndx - outndx); /* Take the next character from the interrupt buffer */ ch = g_syslog_intbuffer.si_buffer[outndx]; /* Increment the OUT index, handling wrap-around */ if (++outndx >= SYSLOG_INTBUFSIZE) { outndx -= SYSLOG_INTBUFSIZE; } g_syslog_intbuffer.si_outndx = (uint16_t)outndx; } leave_critical_section(flags); /* Now we can send the extracted character to the SYSLOG device */ return (inuse > 0) ? ch : EOF; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: syslog_add_intbuffer * * Description: * Add one more character to the interrupt buffer. In the event of * buffer overlowed, the character will be dropped. The indication * "[truncated]\n" will be appended to the end of the interrupt buffer. * * Input Parameters: * ch - The character to add to the interrupt buffer (must be positive). * * Returned Value: * Zero success, the character is echoed back to the caller. A negated * errno value is returned on any failure. * * Assumptions: * - Called only from interrupt handling logic; Interrupts will be * disabled. * - Requires caution because there may be an interrupted execution of * syslog_flush_intbuffer(): Only the outndx can be modified. * ****************************************************************************/ int syslog_add_intbuffer(int ch) { uint32_t inndx; uint32_t outndx; uint32_t endndx; unsigned int inuse; int i; /* How much space is left in the inbuffer? */ inndx = (uint32_t)g_syslog_intbuffer.si_inndx; outndx = (uint32_t)g_syslog_intbuffer.si_outndx; endndx = outndx; if (endndx < outndx) { endndx += SYSLOG_INTBUFSIZE; } inuse = (unsigned int)(endndx - outndx); /* Is there space for another character (reserving space for the overrun * message)? */ if (inuse == USABLE_INTBUFSIZE) { /* Copy the truncated message one character at a time, handing index * wrap-around on each character. */ for (i = 0; i < SYSLOG_BUFOVERRUN_SIZE; i++) { /* Copy one character */ g_syslog_intbuffer.si_buffer[inndx] = (uint8_t)g_overrun_msg[i]; /* Increment the IN index, handling wrap-around */ if (++inndx >= SYSLOG_INTBUFSIZE) { inndx -= SYSLOG_INTBUFSIZE; } DEBUGASSERT(inndx != outndx); } g_syslog_intbuffer.si_inndx = (uint16_t)inndx; return -ENOSPC; } else if (inuse < USABLE_INTBUFSIZE) { /* Copy one character */ g_syslog_intbuffer.si_buffer[inndx] = (uint8_t)ch; /* Increment the IN index, handling wrap-around */ if (++inndx >= SYSLOG_INTBUFSIZE) { inndx -= SYSLOG_INTBUFSIZE; } g_syslog_intbuffer.si_inndx = (uint16_t)inndx; return OK; } else { /* This character goes to the bit bucket. We have already copied * the overrun message so there is nothing else to do. */ return -ENOSPC; } } /**************************************************************************** * Name: syslog_flush_intbuffer * * Description: * Flush any characters that may have been added to the interrupt buffer * to the SYSLOG device. * * Input Parameters: * channel - The syslog channel to use in performing the flush operation. * force - Use the force() method of the channel vs. the putc() method. * * Returned Value: * On success, the character is echoed back to the caller. A negated * errno value is returned on any failure. * * Assumptions: * Interrupts may or may not be disabled. * ****************************************************************************/ int syslog_flush_intbuffer(FAR const struct syslog_channel_s *channel, bool force) { syslog_putc_t putfunc; int ch; int ret = OK; /* Select which putc function to use for this flush */ putfunc = force ? channel->sc_putc : channel->sc_force; /* This logic is performed with the scheduler disabled to protect from * concurrent modification by other tasks. */ sched_lock(); do { /* Transfer one character to time. This is inefficient, but is * done in this way to: (1) Deal with concurrent modification of * the interrutp buffer from interrupt activity, (2) Avoid keeper * interrupts disabled for a long time, and (3) to handler * wraparound of the circular buffer indices. */ ch = syslog_remove_intbuffer(); if (ch != EOF) { ret = putfunc(ch); } } while (ch != EOF && ret >= 0); return ret; } #endif /* CONFIG_SYSLOG_INTBUFFER */