/**************************************************************************** * drivers/audio/es8388.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "es8388.h" /**************************************************************************** * Private Function Prototypes ****************************************************************************/ #if !defined(CONFIG_ES8388_REGDUMP) static #endif uint8_t es8388_readreg(FAR struct es8388_dev_s *priv, uint8_t regaddr); static void es8388_writereg(FAR struct es8388_dev_s *priv, uint8_t regaddr, uint16_t regval); #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static void es8388_setvolume(FAR struct es8388_dev_s *priv, es_module_e module, uint16_t volume); #endif static void es8388_setmclkfrequency(FAR struct es8388_dev_s *priv); #ifndef CONFIG_AUDIO_EXCLUDE_MUTE static void es8388_setmute(FAR struct es8388_dev_s *priv, es_module_e module, bool enable); #endif static void es8388_setmicgain(FAR struct es8388_dev_s *priv, uint32_t gain); static void es8388_setbitspersample(FAR struct es8388_dev_s *priv); static void es8388_setsamplerate(FAR struct es8388_dev_s *priv); static int es8388_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps); #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps); #else static int es8388_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps); #endif static int es8388_shutdown(FAR struct audio_lowerhalf_s *dev); static void es8388_processdone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result); static void es8388_returnbuffers(FAR struct es8388_dev_s *priv); static int es8388_processbegin(FAR struct es8388_dev_s *priv); #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_start(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int es8388_start(FAR struct audio_lowerhalf_s *dev); #endif #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int es8388_stop(FAR struct audio_lowerhalf_s *dev); #endif #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session); static int es8388_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int es8388_pause(FAR struct audio_lowerhalf_s *dev); static int es8388_resume(FAR struct audio_lowerhalf_s *dev); #endif #endif static int es8388_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int es8388_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int es8388_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg); #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session); #else static int es8388_reserve(FAR struct audio_lowerhalf_s *dev); #endif #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_release(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int es8388_release(FAR struct audio_lowerhalf_s *dev); #endif static void *es8388_workerthread(pthread_addr_t pvarg); static void es8388_audio_output(FAR struct es8388_dev_s *priv); static void es8388_audio_input(FAR struct es8388_dev_s *priv); static void es8388_reset(FAR struct es8388_dev_s *priv); /**************************************************************************** * Private Data ****************************************************************************/ static const struct audio_ops_s g_audioops = { es8388_getcaps, /* getcaps */ es8388_configure, /* configure */ es8388_shutdown, /* shutdown */ es8388_start, /* start */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP es8388_stop, /* stop */ #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME es8388_pause, /* pause */ es8388_resume, /* resume */ #endif NULL, /* allocbuffer */ NULL, /* freebuffer */ es8388_enqueuebuffer, /* enqueue_buffer */ es8388_cancelbuffer, /* cancel_buffer */ es8388_ioctl, /* ioctl */ NULL, /* read */ NULL, /* write */ es8388_reserve, /* reserve */ es8388_release /* release */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: es8388_readreg * * Description: * Read the specified 8-bit register from the ES8388 device through I2C. * * priv - A reference to the driver state structure. * regaddr - Address of the register to be read. * * Returned Value: * On success, the byte stored in the register. * On failure, 0. * ****************************************************************************/ #if !defined(CONFIG_ES8388_REGDUMP) static #endif uint8_t es8388_readreg(FAR struct es8388_dev_s *priv, uint8_t regaddr) { int retries; /* Try up to three times to read the register */ for (retries = 0; retries < 3; retries++) { struct i2c_msg_s msg[2]; uint8_t data; int ret; /* Set up to write the address */ msg[0].frequency = priv->lower->frequency; msg[0].addr = priv->lower->address; msg[0].flags = 0; msg[0].buffer = ®addr; msg[0].length = 1; /* Followed by the read data */ msg[1].frequency = priv->lower->frequency; msg[1].addr = priv->lower->address; msg[1].flags = I2C_M_READ; msg[1].buffer = &data; msg[1].length = 12; /* Read the register data. The returned value is the number messages * completed. */ ret = I2C_TRANSFER(priv->i2c, msg, 2); if (ret < 0) { #ifdef CONFIG_I2C_RESET /* Perhaps the I2C bus is locked up? Try to shake the bus free */ audwarn("WARNING: I2C_TRANSFER failed: %d ... Resetting\n", ret); ret = I2C_RESET(priv->i2c); if (ret < 0) { auderr("I2C_RESET failed: %d\n", ret); break; } #else auderr("I2C_TRANSFER failed: %d\n", ret); #endif } else { /* The I2C transfer was successful... break out of the loop and * return the value read. */ audinfo("Read: %02x -> %02x\n", regaddr, data); return data; } audinfo("retries=%d regaddr=%02x\n", retries, regaddr); } /* No error indication is returned on a failure... just return zero */ return 0; } /**************************************************************************** * Name: es8388_writereg * * Description: * Write the specified 8-bit register to the ES8388 device through I2C. * * Input Parameters: * priv - A reference to the driver state structure. * regaddr - Address of the register to be written. * regval - Value to be written. * * Returned Value: * None. * ****************************************************************************/ static void es8388_writereg(FAR struct es8388_dev_s *priv, uint8_t regaddr, uint16_t regval) { struct i2c_config_s config; int retries; /* Setup up the I2C configuration */ config.frequency = priv->lower->frequency; config.address = priv->lower->address; config.addrlen = 7; /* Try up to three times to write the register */ for (retries = 0; retries < 3; retries++) { uint8_t data[2]; int ret; /* Set up the data to write */ data[0] = regaddr; data[1] = regval; /* Read the register data. The returned value is the number messages * completed. */ ret = i2c_write(priv->i2c, &config, data, 2); if (ret < 0) { #ifdef CONFIG_I2C_RESET /* Perhaps the I2C bus is locked up? Try to shake the bus free */ audwarn("WARNING: i2c_write failed: %d ... Resetting\n", ret); ret = I2C_RESET(priv->i2c); if (ret < 0) { auderr("I2C_RESET failed: %d\n", ret); break; } #else auderr("I2C_TRANSFER failed: %d\n", ret); #endif } else { /* The I2C transfer was successful... break out of the loop and * return. */ audinfo("Write: %02x <- %02x\n", regaddr, regval); return; } audinfo("retries=%d regaddr=%02x\n", retries, regaddr); } } /**************************************************************************** * Name: es8388_setmicgain * * Description: * Set the microphone gain. * * Input Parameters: * priv - A reference to the driver state structure. * gain - The microphone gain to be set in the codec (0..24). * * Returned Value: * None. * ****************************************************************************/ static void es8388_setmicgain(FAR struct es8388_dev_s *priv, uint32_t gain) { static const es_mic_gain_e gain_map[] = { ES_MIC_GAIN_0DB, ES_MIC_GAIN_3DB, ES_MIC_GAIN_6DB, ES_MIC_GAIN_9DB, ES_MIC_GAIN_12DB, ES_MIC_GAIN_15DB, ES_MIC_GAIN_18DB, ES_MIC_GAIN_21DB, ES_MIC_GAIN_24DB, }; priv->mic_gain = gain_map[MIN(gain, 24) / 3]; es8388_writereg(priv, ES8388_ADCCONTROL1, ES8388_MICAMPR(priv->mic_gain) | ES8388_MICAMPL(priv->mic_gain)); } /**************************************************************************** * Name: es8388_setvolume * * Description: * Set the right and left volume values in the ES8388 device based on the * desired volume and balance settings. * * Input Parameters: * priv - A reference to the driver state structure; * module - The module to change the volume for; * volume - The volume to be set in the codec (0..1000). * * Returned Value: * None. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static void es8388_setvolume(FAR struct es8388_dev_s *priv, es_module_e module, uint16_t volume) { uint16_t leftlvl; int16_t dbleftlvl; uint16_t rightlvl; int16_t dbrightlvl; if (volume > AUDIO_VOLUME_MAX) { audwarn("Warning: Volume > AUDIO_VOLUME_MAX!\n"); volume = AUDIO_VOLUME_MAX; } audinfo("Volume = %u\n", volume); #ifndef CONFIG_AUDIO_EXCLUDE_BALANCE /* Calculate the left channel volume level {0..1000} */ if (priv->balance <= AUDIO_BALANCE_CENTER) { leftlvl = volume; } else if (priv->balance == AUDIO_BALANCE_RIGHT) { leftlvl = AUDIO_VOLUME_MIN; } else { leftlvl = ((((AUDIO_BALANCE_RIGHT - priv->balance) * 100) / AUDIO_BALANCE_CENTER) * volume) / 100; } /* Calculate the right channel volume level {0..1000} */ if (priv->balance >= AUDIO_BALANCE_CENTER) { rightlvl = volume; } else if (priv->balance == AUDIO_BALANCE_LEFT) { rightlvl = AUDIO_VOLUME_MIN; } else { rightlvl = (((priv->balance * 100) / AUDIO_BALANCE_CENTER) * volume) / 100; } # else leftlvl = volume; rightlvl = volume; # endif /* Convert from (0..1000) to (-96..0) */ dbleftlvl = (int16_t) (leftlvl ? (20 * log10f((float)rightlvl / AUDIO_VOLUME_MAX)) : -96); dbrightlvl = (int16_t) (rightlvl ? (20 * log10f((float)rightlvl / AUDIO_VOLUME_MAX)) : -96); audinfo("Volume: dbleftlvl = %d, dbrightlvl = %d\n", dbleftlvl, dbrightlvl); /* Convert and truncate to 1 byte */ dbleftlvl = ((-dbleftlvl) << 1) & 0xff; dbrightlvl = ((-dbrightlvl) << 1) & 0xff; /* Set the volume */ if (module == ES_MODULE_DAC || module == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACCONTROL4, ES8388_LDACVOL(dbleftlvl)); es8388_writereg(priv, ES8388_DACCONTROL5, ES8388_RDACVOL(dbrightlvl)); priv->volume_out = volume; } if (module == ES_MODULE_ADC || module == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_ADCCONTROL8, ES8388_LADCVOL(dbleftlvl)); es8388_writereg(priv, ES8388_ADCCONTROL9, ES8388_RADCVOL(dbrightlvl)); priv->volume_in = volume; } } #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ /**************************************************************************** * Name: es8388_setmclkfrequency * * Description: * Set the frequency of the I2S' Master Clock (MCLK). * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ static void es8388_setmclkfrequency(FAR struct es8388_dev_s *priv) { int i; priv->mclk = 0; for (i = 0; i < nitems(es8388_mclk_rate); i++) { if (es8388_mclk_rate[i].sample_rate == priv->samprate) { /* Normally master clock should be multiple of the sample rate * and bclk at the same time. The field mclk_rate_s::multiple * means the multiple of mclk to the sample rate. If data width * is 24 bits, in order to keep mclk a multiple to the bclk, * mclk_rate_s::multiple should be a divisible by 3, otherwise * the ws signal will be inaccurate. */ priv->mclk = es8388_mclk_rate[i].mclk; if (es8388_mclk_rate[i].multiple % (priv->bpsamp / 8) == 0) { break; } } } if (priv->mclk) { audinfo("MCLK Freq: %u\n", priv->mclk); int ret = I2S_SETMCLKFREQUENCY(priv->i2s, priv->mclk); if (ret < 0) { if (ret != -ENOTTY) { auderr("Failed to set the MCLK on lower half\n"); } else { priv->mclk = 0; auderr("MCLK cannot be set on lower half\n"); } } } else { auderr("Unsupported combination of sample rate and" " data width\n"); } } /**************************************************************************** * Name: es8388_setmute * * Description: * Mute/unmute the ADC or DAC of the codec based on the current settings. * * Input Parameters: * priv - A reference to the driver state structure. * enable - Boolean to enable or disable the mute function. * * Returned Value: * None. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_MUTE static void es8388_setmute(FAR struct es8388_dev_s *priv, es_module_e module, bool enable) { uint8_t reg = 0; audinfo("module=%d, mute=%d\n", module, (int)enable); priv->mute = enable; if (module == ES_MODULE_DAC || module == ES_MODULE_ADC_DAC) { reg = es8388_readreg(priv, ES8388_DACCONTROL3) & (~ES8388_DACMUTE_BITMASK); es8388_writereg(priv, ES8388_DACCONTROL3, reg | ES8388_DACMUTE(enable)); } if (module == ES_MODULE_ADC || module == ES_MODULE_ADC_DAC) { reg = es8388_readreg(priv, ES8388_ADCCONTROL7) & (~ES8388_ADCMUTE_BITMASK); es8388_writereg(priv, ES8388_ADCCONTROL7, reg | ES8388_ADCMUTE(enable)); } } #endif /**************************************************************************** * Name: es8388_setbitspersample * * Description: * Set the number of bits per sample used by the I2S driver and the codec. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. * ****************************************************************************/ static void es8388_setbitspersample(FAR struct es8388_dev_s *priv) { uint8_t reg; uint8_t bit_config; DEBUGASSERT(priv && priv->lower); switch (priv->bpsamp) { case 16: bit_config = ES_WORD_LENGTH_16BITS; break; case 18: bit_config = ES_WORD_LENGTH_18BITS; break; case 20: bit_config = ES_WORD_LENGTH_20BITS; break; case 24: bit_config = ES_WORD_LENGTH_24BITS; break; case 32: bit_config = ES_WORD_LENGTH_32BITS; break; default: audwarn("Data length not supported.\n"); return; } I2S_TXDATAWIDTH(priv->i2s, priv->bpsamp); I2S_RXDATAWIDTH(priv->i2s, priv->bpsamp); if (priv->audio_mode == ES_MODULE_ADC || priv->audio_mode == ES_MODULE_ADC_DAC) { reg = es8388_readreg(priv, ES8388_ADCCONTROL4) & (~ES8388_ADCWL_BITMASK); es8388_writereg(priv, ES8388_ADCCONTROL4, reg | ES8388_ADCWL(bit_config)); } if (priv->audio_mode == ES_MODULE_DAC || priv->audio_mode == ES_MODULE_ADC_DAC) { reg = es8388_readreg(priv, ES8388_DACCONTROL1) & (~ES8388_DACWL_BITMASK); es8388_writereg(priv, ES8388_DACCONTROL1, reg | ES8388_DACWL(bit_config)); } audinfo("Datawidth set to %u\n", priv->bpsamp); } /**************************************************************************** * Name: es8388_setsamplerate * * Description: * Sets the sample frequency for the codec ADC/DAC and the I2S driver. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. * ****************************************************************************/ static void es8388_setsamplerate(FAR struct es8388_dev_s *priv) { DEBUGASSERT(priv && priv->lower); uint16_t regval; switch (priv->samprate) { case 8000: regval = ES_LCLK_DIV_1536; break; case 11025: case 12000: regval = ES_LCLK_DIV_1024; break; case 16000: regval = ES_LCLK_DIV_768; break; case 22050: case 24000: regval = ES_LCLK_DIV_512; break; case 32000: regval = ES_LCLK_DIV_384; break; case 44100: case 48000: regval = ES_LCLK_DIV_256; break; case 88200: case 96000: regval = ES_LCLK_DIV_128; break; default: audwarn("Sample rate not supported.\n"); return; } /* es8388_setmclkfrequency needs to be called before I2S_**SAMPLERATE */ es8388_setmclkfrequency(priv); I2S_TXSAMPLERATE(priv->i2s, priv->samprate); I2S_RXSAMPLERATE(priv->i2s, priv->samprate); if (priv->audio_mode == ES_MODULE_ADC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_ADCCONTROL5, ES8388_ADCFSRATIO(regval)); } if (priv->audio_mode == ES_MODULE_DAC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACCONTROL2, ES8388_DACFSRATIO(regval)); } audinfo("Sample rate set to %d\n", priv->samprate); } /**************************************************************************** * Name: es8388_getcaps * * Description: * Get the audio device capabilities. * * Input Parameters: * dev - A reference to the lower half state structure. * type - The type of query. * caps - A reference to an audio caps structure. * * Returned Value: * Length of the caps structure. * ****************************************************************************/ static int es8388_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps) { /* Validate the structure */ DEBUGASSERT(caps && caps->ac_len >= sizeof(struct audio_caps_s)); audinfo("getcaps: type=%d ac_type=%d\n", type, caps->ac_type); /* Fill in the caller's structure based on requested info */ caps->ac_format.hw = 0; caps->ac_controls.w = 0; switch (caps->ac_type) { /* Caller is querying for the types of units we support */ case AUDIO_TYPE_QUERY: /* Provide our overall capabilities. The interfacing software * must then call us back for specific info for each capability. */ caps->ac_channels = 2; /* Stereo output */ switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* The input formats we can decode / accept */ #ifdef CONFIG_AUDIO_FORMAT_PCM caps->ac_format.hw |= (1 << (AUDIO_FMT_PCM - 1)); #endif /* The types of audio units we implement */ caps->ac_controls.b[0] = AUDIO_TYPE_INPUT | AUDIO_TYPE_OUTPUT | AUDIO_TYPE_FEATURE; break; default: caps->ac_controls.b[0] = AUDIO_SUBFMT_END; break; } break; /* Provide capabilities of our OUTPUT unit */ case AUDIO_TYPE_OUTPUT: caps->ac_channels = 2; switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* Report the Sample rates we support */ /* 8kHz is hardware dependent */ caps->ac_controls.hw[0] = AUDIO_SAMP_RATE_11K | AUDIO_SAMP_RATE_16K | AUDIO_SAMP_RATE_22K | AUDIO_SAMP_RATE_32K | AUDIO_SAMP_RATE_44K | AUDIO_SAMP_RATE_48K; break; default: break; } break; case AUDIO_TYPE_INPUT: caps->ac_channels = 2; switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* Report supported input sample rates */ caps->ac_controls.hw[0] = AUDIO_SAMP_RATE_11K | AUDIO_SAMP_RATE_16K | AUDIO_SAMP_RATE_22K | AUDIO_SAMP_RATE_32K | AUDIO_SAMP_RATE_44K | AUDIO_SAMP_RATE_48K; break; default: break; } break; /* Provide capabilities of our FEATURE units */ case AUDIO_TYPE_FEATURE: /* If the sub-type is UNDEF, then report the Feature Units we * support. */ if (caps->ac_subtype == AUDIO_FU_UNDEF) { /* Fill in the ac_controls section with the Feature Units we * have. */ caps->ac_controls.b[0] = AUDIO_FU_VOLUME | AUDIO_FU_MUTE; caps->ac_controls.b[1] = (AUDIO_FU_BALANCE | AUDIO_FU_INP_GAIN) >> 8; } break; /* All others we don't support */ default: /* Zero out the fields to indicate no support */ caps->ac_subtype = 0; caps->ac_channels = 0; break; } /* Return the length of the audio_caps_s struct for validation of * proper Audio device type. */ return caps->ac_len; } /**************************************************************************** * Name: es8388_configure * * Description: * Configure the audio device for the specified mode of operation. * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * caps - A reference to an audio caps structure. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps) #else static int es8388_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; int ret = OK; DEBUGASSERT(priv != NULL && caps != NULL); audinfo("configure: ac_type: %d\n", caps->ac_type); /* Process the configure operation */ switch (caps->ac_type) { case AUDIO_TYPE_FEATURE: audinfo(" AUDIO_TYPE_FEATURE\n"); /* Process based on Feature Unit */ switch (caps->ac_format.hw) { #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME case AUDIO_FU_VOLUME: { /* Set the volume */ uint16_t volume = caps->ac_controls.hw[0]; audinfo(" Volume: %d\n", volume); if (volume >= 0 && volume <= 1000) { es8388_setvolume(priv, priv->audio_mode, volume); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ #ifndef CONFIG_AUDIO_EXCLUDE_MUTE case AUDIO_FU_MUTE: { /* Mute/Unmute */ bool mute = (bool)caps->ac_controls.hw[0]; audinfo(" Mute: %d\n", mute); es8388_setmute(priv, ES_MODULE_DAC, mute); } break; #endif /* CONFIG_AUDIO_EXCLUDE_MUTE */ #ifndef CONFIG_AUDIO_EXCLUDE_BALANCE case AUDIO_FU_BALANCE: { /* Set the Balance */ uint16_t balance = caps->ac_controls.hw[0]; audinfo(" Balance: %d\n", balance); if (balance >= 0 && balance <= 1000) { priv->balance = balance; es8388_setvolume(priv, priv->audio_mode, priv->volume_out); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_BALANCE */ case AUDIO_FU_INP_GAIN: { /* Set the mic gain */ uint32_t mic_gain = caps->ac_controls.hw[0]; audinfo(" Mic gain: %" PRIu32 "\n", mic_gain); es8388_setmicgain(priv, mic_gain); } break; default: auderr(" Unrecognized feature unit\n"); ret = -ENOTTY; break; } break; case AUDIO_TYPE_OUTPUT: { audinfo(" AUDIO_TYPE_OUTPUT:\n"); audinfo(" Number of channels: %u\n", caps->ac_channels); audinfo(" Sample rate: %u\n", caps->ac_controls.hw[0]); audinfo(" Sample width: %u\n", caps->ac_controls.b[2]); /* Verify that all of the requested values are supported */ ret = -ERANGE; if (caps->ac_channels != 1 && caps->ac_channels != 2) { auderr("Unsupported number of channels: %d\n", caps->ac_channels); break; } if (caps->ac_controls.b[2] != 16 && caps->ac_controls.b[2] != 18 && caps->ac_controls.b[2] != 20 && caps->ac_controls.b[2] != 24 && caps->ac_controls.b[2] != 32) { auderr("Unsupported bits per sample: %d\n", caps->ac_controls.b[2]); break; } /* Save the current stream configuration */ priv->samprate = caps->ac_controls.hw[0]; priv->nchannels = caps->ac_channels; priv->bpsamp = caps->ac_controls.b[2]; es8388_audio_output(priv); es8388_reset(priv); es8388_setsamplerate(priv); es8388_setbitspersample(priv); ret = OK; } break; case AUDIO_TYPE_INPUT: { audinfo(" AUDIO_TYPE_INPUT:\n"); audinfo(" Number of channels: %u\n", caps->ac_channels); audinfo(" Sample rate: %u\n", caps->ac_controls.hw[0]); audinfo(" Sample width: %u\n", caps->ac_controls.b[2]); /* Verify that all of the requested values are supported */ ret = -ERANGE; if (caps->ac_channels != 1 && caps->ac_channels != 2) { auderr("Unsupported number of channels: %d\n", caps->ac_channels); break; } if (caps->ac_controls.b[2] != 16 && caps->ac_controls.b[2] != 18 && caps->ac_controls.b[2] != 20 && caps->ac_controls.b[2] != 24 && caps->ac_controls.b[2] != 32) { auderr("Unsupported bits per sample: %d\n", caps->ac_controls.b[2]); break; } /* Save the current stream configuration */ priv->samprate = caps->ac_controls.hw[0]; priv->nchannels = caps->ac_channels; priv->bpsamp = caps->ac_controls.b[2]; es8388_audio_input(priv); es8388_reset(priv); es8388_setsamplerate(priv); es8388_setbitspersample(priv); ret = OK; } break; case AUDIO_TYPE_PROCESSING: break; } return ret; } /**************************************************************************** * Name: es8388_shutdown * * Description: * Shutdown the ES8388 chip and reset it. * * Input Parameters: * dev - A reference to the lower half state structure. * * Returned Value: * Returns OK. * ****************************************************************************/ static int es8388_shutdown(FAR struct audio_lowerhalf_s *dev) { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; DEBUGASSERT(priv); audinfo("Shutdown triggered\n"); /* Now issue a software reset. This puts all ES8388 registers back in * their default state. */ es8388_reset(priv); return OK; } /**************************************************************************** * Name: es8388_processdone * * Description: * This is the I2S callback function that is invoked when the transfer * completes. * * Input Parameters: * i2s - A reference to the I2S interface. * apb - A reference to the audio pipeline buffer. * arg - A void reference to the driver state structure. * result - The result of the last transfer. * * Returned Value: * None. * ****************************************************************************/ static void es8388_processdone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result) { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)arg; struct audio_msg_s msg; irqstate_t flags; int ret; DEBUGASSERT(i2s && priv && priv->running && apb); audinfo("Transfer done: apb=%p inflight=%d result=%d\n", apb, priv->inflight, result); /* We do not place any restriction on the context in which this function * is called. It may be called from an interrupt handler. Therefore, the * doneq and in-flight values might be accessed from the interrupt level. * Not the best design. But we will use interrupt controls to protect * against that possibility. */ flags = enter_critical_section(); /* Add the completed buffer to the end of our doneq. We do not yet * decrement the reference count. */ dq_addlast((FAR dq_entry_t *)apb, &priv->doneq); /* And decrement the number of buffers in-flight */ DEBUGASSERT(priv->inflight > 0); priv->inflight--; /* Save the result of the transfer */ priv->result = result; leave_critical_section(flags); /* Now send a message to the worker thread, informing it that there are * buffers in the done queue that need to be cleaned up. */ msg.msg_id = AUDIO_MSG_COMPLETE; ret = file_mq_send(&priv->mq, (FAR const char *)&msg, sizeof(msg), CONFIG_ES8388_MSG_PRIO); if (ret < 0) { auderr("file_mq_send failed: %d\n", ret); } } /**************************************************************************** * Name: es8388_returnbuffers * * Description: * This function is called after the completion of one or more data * transfers. This function will empty the done queue and release our * reference to each buffer. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. * ****************************************************************************/ static void es8388_returnbuffers(FAR struct es8388_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; /* The doneq and in-flight values might be accessed from the interrupt * level in some implementations. Not the best design. But we will * use interrupt controls to protect against that possibility. */ flags = enter_critical_section(); while (dq_peek(&priv->doneq) != NULL) { /* Take the next buffer from the queue of completed transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->doneq); leave_critical_section(flags); audinfo("Returning: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); /* Are we returning the final buffer in the stream? */ if ((apb->flags & AUDIO_APB_FINAL) != 0) { /* Both the pending and the done queues should be empty and there * should be no buffers in-flight. */ DEBUGASSERT(dq_empty(&priv->doneq) && dq_empty(&priv->pendq) && priv->inflight == 0); /* Set the terminating flag. This will, eventually, cause the * worker thread to exit (if it is not already terminating). */ audinfo("Terminating\n"); priv->terminating = true; } /* Release our reference to the audio buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif flags = enter_critical_section(); } leave_critical_section(flags); } /**************************************************************************** * Name: es8388_processbegin * * Description: * Start the transfer an audio buffer to the ES8388 via I2S. This * will not wait for the transfer to complete but will return immediately. * the es8388_processdone called will be invoked when the transfer * completes, stimulating the worker thread to call this function again. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ static int es8388_processbegin(FAR struct es8388_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; uint32_t timeout; int shift; int ret; /* Loop while there are audio buffers to be sent and we have few than * CONFIG_ES8388_INFLIGHT then "in-flight" * * The 'inflight' value might be modified from the interrupt level in some * implementations. We will use interrupt controls to protect against * that possibility. * * The 'pendq', on the other hand, is protected via a mutex. Let's * hold the mutex while we are busy here and disable the interrupts * only while accessing 'inflight'. */ ret = nxmutex_lock(&priv->pendlock); if (ret < 0) { return ret; } while (priv->inflight < CONFIG_ES8388_INFLIGHT && dq_peek(&priv->pendq) != NULL && !priv->paused) { /* Take next buffer from the queue of pending transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq); audinfo("Transferring apb=%p, size=%d inflight=%d\n", apb, apb->nbytes, priv->inflight); /* Increment the number of buffers in-flight before sending in order * to avoid a possible race condition. */ flags = enter_critical_section(); priv->inflight++; leave_critical_section(flags); /* Send the entire audio buffer via I2S. What is a reasonable timeout * to use? This would depend on the bit rate and size of the buffer. * * Samples in the buffer (samples): * = buffer_size * 8 / bpsamp * Sample rate (samples/second): * = samplerate * nchannels * Expected transfer time (seconds): * = (buffer_size * 8) / bpsamp / samplerate / nchannels * * We will set the timeout about twice that. * * NOTES: * - The multiplier of 8 becomes 16000 for 2x and units of * milliseconds. * - 16000 is a approximately 16384 (1 << 14). * nchannels is either (1 << 0) or (1 << 1). * So this can be simplifies to (milliseconds): * * = (buffer_size << shift) / bpsamp / samplerate */ shift = 14; shift -= (priv->nchannels > 1) ? 1 : 0; timeout = MSEC2TICK(((uint32_t)(apb->nbytes - apb->curbyte) << shift) / (uint32_t)priv->samprate / (uint32_t)priv->bpsamp); if (priv->audio_mode == ES_MODULE_DAC) { ret = I2S_SEND(priv->i2s, apb, es8388_processdone, priv, timeout); } else { ret = I2S_RECEIVE(priv->i2s, apb, es8388_processdone, priv, timeout); } if (ret < 0) { auderr("I2S transfer failed: %d\n", ret); break; } } nxmutex_unlock(&priv->pendlock); return ret; } /**************************************************************************** * Name: es8388_start * * Description: * Start the configured operation (audio streaming, volume enabled, etc.). * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_start(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int es8388_start(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; struct sched_param sparam; struct mq_attr attr; pthread_attr_t tattr; FAR void *value; int ret; uint8_t prev_regval = 0; uint8_t regval = 0; audinfo("ES8388 Start\n"); prev_regval = es8388_readreg(priv, ES8388_DACCONTROL21); if (priv->audio_mode == ES_MODULE_LINE) { es8388_writereg(priv, ES8388_DACCONTROL16, ES8388_RMIXSEL_RIN2 | ES8388_LMIXSEL_LIN2); es8388_writereg(priv, ES8388_DACCONTROL17, ES8388_LI2LOVOL(ES8388_MIXER_GAIN_0DB) | ES8388_LI2LO_ENABLE | ES8388_LD2LO_DISABLE); es8388_writereg(priv, ES8388_DACCONTROL20, ES8388_RI2ROVOL(ES8388_MIXER_GAIN_0DB) | ES8388_RI2RO_ENABLE | ES8388_RD2RO_DISABLE); es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_NORMAL | ES8388_ADC_DLL_PWD_NORMAL | ES8388_MCLK_DIS_NORMAL | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_ADC | ES8388_SLRCK_SAME); } else { es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_NORMAL | ES8388_ADC_DLL_PWD_NORMAL | ES8388_MCLK_DIS_NORMAL | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_DAC | ES8388_SLRCK_SAME); } regval = es8388_readreg(priv, ES8388_DACCONTROL21); if (regval != prev_regval) { es8388_writereg(priv, ES8388_CHIPPOWER, ES8388_DACVREF_PDN_PWRUP | ES8388_ADCVREF_PDN_PWRUP | ES8388_DACDLL_PDN_NORMAL | ES8388_ADCDLL_PDN_NORMAL | ES8388_DAC_STM_RST_RESET | ES8388_ADC_STM_RST_RESET | ES8388_DAC_DIGPDN_RESET | ES8388_ADC_DIGPDN_RESET); es8388_writereg(priv, ES8388_CHIPPOWER, ES8388_DACVREF_PDN_PWRUP | ES8388_ADCVREF_PDN_PWRUP | ES8388_DACDLL_PDN_NORMAL | ES8388_ADCDLL_PDN_NORMAL | ES8388_DAC_STM_RST_NORMAL | ES8388_ADC_STM_RST_NORMAL | ES8388_DAC_DIGPDN_NORMAL | ES8388_ADC_DIGPDN_NORMAL); } if (priv->audio_mode == ES_MODULE_LINE || priv->audio_mode == ES_MODULE_ADC_DAC || priv->audio_mode == ES_MODULE_ADC) { es8388_writereg(priv, ES8388_ADCPOWER, ES8388_INT1LP_NORMAL | ES8388_FLASHLP_NORMAL | ES8388_PDNADCBIASGEN_NORMAL | ES8388_PDNMICB_PWRON | ES8388_PDNADCR_PWRUP | ES8388_PDNADCL_PWRUP | ES8388_PDNAINR_NORMAL | ES8388_PDNAINL_NORMAL); } if (priv->audio_mode == ES_MODULE_LINE || priv->audio_mode == ES_MODULE_ADC_DAC || priv->audio_mode == ES_MODULE_DAC) { es8388_writereg(priv, ES8388_DACPOWER, ES8388_ROUT2_ENABLE | ES8388_LOUT2_ENABLE | ES8388_ROUT1_ENABLE | ES8388_LOUT1_ENABLE | ES8388_PDNDACR_PWRUP | ES8388_PDNDACL_PWRUP); } #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, priv->audio_mode, false); #endif /* Create a message queue for the worker thread */ snprintf(priv->mqname, sizeof(priv->mqname), "/regconfig/%" PRIXPTR, (uintptr_t)priv); attr.mq_maxmsg = 16; attr.mq_msgsize = sizeof(struct audio_msg_s); attr.mq_curmsgs = 0; attr.mq_flags = 0; ret = file_mq_open(&priv->mq, priv->mqname, O_RDWR | O_CREAT, 0644, &attr); if (ret < 0) { /* Error creating message queue! */ auderr("Couldn't allocate message queue\n"); return ret; } /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { audinfo("Joining old thread\n"); pthread_join(priv->threadid, &value); } /* Start our thread for processing device data */ pthread_attr_init(&tattr); sparam.sched_priority = sched_get_priority_max(SCHED_FIFO) - 3; pthread_attr_setschedparam(&tattr, &sparam); pthread_attr_setstacksize(&tattr, CONFIG_ES8388_WORKER_STACKSIZE); audinfo("Starting worker thread\n"); ret = pthread_create(&priv->threadid, &tattr, es8388_workerthread, (pthread_addr_t)priv); if (ret != OK) { auderr("pthread_create failed: %d\n", ret); } else { pthread_setname_np(priv->threadid, "es8388"); audinfo("Created worker thread\n"); } return ret; } /**************************************************************************** * Name: es8388_stop * * Description: Stop the configured operation (audio streaming, volume * disabled, etc.). * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int es8388_stop(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; struct audio_msg_s term_msg; FAR void *value; audinfo("ES8388 Stop\n"); if (priv->audio_mode == ES_MODULE_LINE) { es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_NORMAL | ES8388_ADC_DLL_PWD_NORMAL | ES8388_MCLK_DIS_NORMAL | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_DAC | ES8388_SLRCK_SAME); es8388_writereg(priv, ES8388_DACCONTROL16, ES8388_RMIXSEL_RIN1 | ES8388_LMIXSEL_LIN1); es8388_writereg(priv, ES8388_DACCONTROL17, ES8388_LI2LOVOL(ES8388_MIXER_GAIN_0DB) | ES8388_LI2LO_DISABLE | ES8388_LD2LO_ENABLE); es8388_writereg(priv, ES8388_DACCONTROL20, ES8388_RI2ROVOL(ES8388_MIXER_GAIN_0DB) | ES8388_RI2RO_DISABLE | ES8388_RD2RO_ENABLE); goto stop_msg; } if (priv->audio_mode == ES_MODULE_DAC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACPOWER, ES8388_ROUT2_DISABLE | ES8388_LOUT2_DISABLE | ES8388_ROUT1_DISABLE | ES8388_LOUT1_DISABLE | ES8388_PDNDACR_PWRUP | ES8388_PDNDACL_PWRUP); } if (priv->audio_mode == ES_MODULE_ADC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_ADCPOWER, ES8388_INT1LP_LP | ES8388_FLASHLP_LP | ES8388_PDNADCBIASGEN_LP | ES8388_PDNMICB_PWRDN | ES8388_PDNADCR_PWRDN | ES8388_PDNADCL_PWRDN | ES8388_PDNAINR_PWRDN | ES8388_PDNAINL_PWRDN); } if (priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_PWRDN | ES8388_ADC_DLL_PWD_PWRDN | ES8388_MCLK_DIS_DISABLE | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_DAC | ES8388_SLRCK_SAME); } stop_msg: #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, priv->audio_mode, true); #endif /* Send a message to stop all audio streaming */ term_msg.msg_id = AUDIO_MSG_STOP; term_msg.u.data = 0; file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_ES8388_MSG_PRIO); /* Join the worker thread */ pthread_join(priv->threadid, &value); priv->threadid = 0; es8388_dump_registers(&priv->dev, "After stop"); return OK; } #endif /**************************************************************************** * Name: es8388_pause * * Description: Pauses the playback. * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int es8388_pause(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; audinfo("ES8388 Pause\n"); if (priv->running && !priv->paused) { priv->paused = true; #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, priv->audio_mode, true); #endif } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: es8388_resume * * Description: Resumes the playback. * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int es8388_resume(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; audinfo("ES8388 Resume\n"); if (priv->running && priv->paused) { priv->paused = false; #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, priv->audio_mode, false); #endif es8388_processbegin(priv); } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: es8388_enqueuebuffer * * Description: * Enqueue an Audio Pipeline Buffer for processing. * * Input Parameters: * dev - A reference to the lower half state structure. * apb - A reference to the audio pipeline buffer. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ static int es8388_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; struct audio_msg_s term_msg; int ret; audinfo("Enqueueing: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); ret = nxmutex_lock(&priv->pendlock); if (ret < 0) { return ret; } /* Take a reference on the new audio buffer */ apb_reference(apb); /* Add the new buffer to the tail of pending audio buffers */ dq_addlast(&apb->dq_entry, &priv->pendq); nxmutex_unlock(&priv->pendlock); /* Send a message to the worker thread indicating that a new buffer has * been enqueued. If mq is NULL, then the playing has not yet started. * In that case we are just "priming the pump" and we don't need to send * any message. */ ret = OK; if (priv->mq.f_inode != NULL) { term_msg.msg_id = AUDIO_MSG_ENQUEUE; term_msg.u.data = 0; ret = file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_ES8388_MSG_PRIO); if (ret < 0) { auderr("file_mq_send failed: %d\n", ret); } } return ret; } /**************************************************************************** * Name: es8388_cancelbuffer * * Description: Called when an enqueued buffer is being cancelled. * * Input Parameters: * dev - A reference to the lower half state structure. * apb - A reference to the audio pipeline buffer. * * Returned Value: * Returns OK. * ****************************************************************************/ static int es8388_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { audinfo("Cancelled apb=%p\n", apb); return OK; } /**************************************************************************** * Name: es8388_ioctl * * Description: Perform a device IOCTL. * * Input Parameters: * dev - A reference to the lower half state structure. * cmd - The IOCTL command. * arg - The argument of the IOCTL command. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ static int es8388_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg) { int ret = OK; #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS FAR struct ap_buffer_info_s *bufinfo; #endif /* Deal with ioctls passed from the upper-half driver */ switch (cmd) { /* Report our preferred buffer size and quantity */ #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS case AUDIOIOC_GETBUFFERINFO: { audinfo("AUDIOIOC_GETBUFFERINFO:\n"); bufinfo = (FAR struct ap_buffer_info_s *) arg; bufinfo->buffer_size = CONFIG_ES8388_BUFFER_SIZE; bufinfo->nbuffers = CONFIG_ES8388_NUM_BUFFERS; } break; #endif default: ret = -ENOTTY; audinfo("Unhandled ioctl: %d\n", cmd); break; } return ret; } /**************************************************************************** * Name: es8388_reserve * * Description: Reserves a session (the only one we have). * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session) #else static int es8388_reserve(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *) dev; int ret = OK; audinfo("ES8388 Reserve\n"); /* Borrow the APBQ semaphore for thread sync */ ret = nxmutex_lock(&priv->pendlock); if (ret < 0) { return ret; } if (priv->reserved) { ret = -EBUSY; } else { /* Initialize the session context */ #ifdef CONFIG_AUDIO_MULTI_SESSION *session = NULL; #endif priv->inflight = 0; priv->running = false; priv->paused = false; #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif priv->reserved = true; } nxmutex_unlock(&priv->pendlock); return ret; } /**************************************************************************** * Name: es8388_release * * Description: Releases the session (the only one we have). * * Input Parameters: * dev - A reference to the lower half state structure. * session - The current audio session. * * Returned Value: * Returns OK or a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_AUDIO_MULTI_SESSION static int es8388_release(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int es8388_release(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct es8388_dev_s *priv = (FAR struct es8388_dev_s *)dev; FAR void *value; int ret; audinfo("ES8388 Release\n"); /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { pthread_join(priv->threadid, &value); priv->threadid = 0; } /* Borrow the APBQ semaphore for thread sync */ ret = nxmutex_lock(&priv->pendlock); /* Really we should free any queued buffers here */ priv->reserved = false; nxmutex_unlock(&priv->pendlock); return ret; } /**************************************************************************** * Name: es8388_audio_output * * Description: * Initialize and configure the ES8388 device as an audio output device. * This will be mostly used when adding input support. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. No failures are detected. * ****************************************************************************/ static void es8388_audio_output(FAR struct es8388_dev_s *priv) { audinfo("ES8388 set to output mode\n"); priv->audio_mode = ES_MODULE_DAC; } /**************************************************************************** * Name: es8388_audio_input * * Description: * Initialize and configure the ES8388 device as an audio input device. * This will be mostly used when adding input support. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. No failures are detected. * ****************************************************************************/ static void es8388_audio_input(FAR struct es8388_dev_s *priv) { audinfo("ES8388 set to input mode\n"); priv->audio_mode = ES_MODULE_ADC; } /**************************************************************************** * Name: es8388_workerthread * * This is the thread that feeds data to the chip and keeps the audio * stream going. * * Input Parameters: * pvarg - The thread arguments. * * Returned Value: * Returns NULL. * ****************************************************************************/ static void *es8388_workerthread(pthread_addr_t pvarg) { FAR struct es8388_dev_s *priv = (struct es8388_dev_s *) pvarg; struct audio_msg_s msg; FAR struct ap_buffer_s *apb; int msglen; unsigned int prio; audinfo("ES8388 worker thread starting\n"); #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif priv->running = true; /* Loop as long as we are supposed to be running and as long as we have * buffers in-flight. */ while (priv->running || priv->inflight > 0) { /* Check if we have been asked to terminate. We have to check if we * still have buffers in-flight. If we do, then we can't stop until * birds come back to roost. */ if (priv->terminating && priv->inflight <= 0) { /* We are IDLE. Break out of the loop and exit. */ break; } else { /* Check if we can process more audio buffers */ es8388_processbegin(priv); } /* Wait for messages from our message queue */ msglen = file_mq_receive(&priv->mq, (FAR char *)&msg, sizeof(msg), &prio); /* Handle the case when we return with no message */ if (msglen < sizeof(struct audio_msg_s)) { auderr("Message too small: %d\n", msglen); continue; } /* Process the message */ switch (msg.msg_id) { /* The ISR has requested more data. We will catch this case at * the top of the loop. */ case AUDIO_MSG_DATA_REQUEST: audinfo("AUDIO_MSG_DATA_REQUEST\n"); break; /* Stop the playback */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP case AUDIO_MSG_STOP: /* Indicate that we are terminating */ audinfo("AUDIO_MSG_STOP: Terminating\n"); priv->terminating = true; break; #endif /* We have a new buffer to process. We will catch this case at * the top of the loop. */ case AUDIO_MSG_ENQUEUE: audinfo("AUDIO_MSG_ENQUEUE\n"); break; /* We will wake up from the I2S callback with this message */ case AUDIO_MSG_COMPLETE: audinfo("AUDIO_MSG_COMPLETE\n"); es8388_returnbuffers(priv); break; default: auderr("Ignoring message ID %d\n", msg.msg_id); break; } } /* Reset the ES8388 hardware */ es8388_reset(priv); /* Return any pending buffers in our pending queue */ nxmutex_lock(&priv->pendlock); while ((apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq)) != NULL) { /* Release our reference to the buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif } nxmutex_unlock(&priv->pendlock); /* Return any pending buffers in our done queue */ es8388_returnbuffers(priv); /* Close the message queue */ file_mq_close(&priv->mq); file_mq_unlink(priv->mqname); /* Send an AUDIO_MSG_COMPLETE message to the client */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK); #endif audinfo("ES8388 worker thread finishing\n"); return NULL; } /**************************************************************************** * Name: es8388_reset * * Description: * Reset and re-initialize the ES8388. * * Input Parameters: * priv - A reference to the driver state structure. * * Returned Value: * None. * ****************************************************************************/ static void es8388_reset(FAR struct es8388_dev_s *priv) { /* Put audio back to its initial configuration */ audinfo("ES8388 reset triggered.\n"); priv->dac_output = CONFIG_ES8388_OUTPUT_CHANNEL; priv->adc_input = CONFIG_ES8388_INPUT_CHANNEL; priv->samprate = ES8388_DEFAULT_SAMPRATE; priv->nchannels = ES8388_DEFAULT_NCHANNELS; priv->bpsamp = ES8388_DEFAULT_BPSAMP; #if !defined(CONFIG_AUDIO_EXCLUDE_VOLUME) && !defined(CONFIG_AUDIO_EXCLUDE_BALANCE) priv->balance = 500; /* Center balance */ #endif /* Software reset. This puts all ES8388 registers back in their * default state. */ uint8_t regconfig; es8388_writereg(priv, ES8388_DACCONTROL3, ES8388_DACMUTE_MUTED | ES8388_DACLER_NORMAL | ES8388_DACSOFTRAMP_DISABLE | ES8388_DACRAMPRATE_4LRCK); es8388_writereg(priv, ES8388_CONTROL2, ES8388_PDNVREFBUF_NORMAL | ES8388_VREFLO_NORMAL | ES8388_PDNIBIASGEN_NORMAL | ES8388_PDNANA_NORMAL | ES8388_LPVREFBUF_LP | ES8388_LPVCMMOD_NORMAL | (1 << 6)); /* Default value of undocumented bit */ es8388_writereg(priv, ES8388_CHIPPOWER, ES8388_DACVREF_PDN_PWRUP | ES8388_ADCVREF_PDN_PWRUP | ES8388_DACDLL_PDN_NORMAL | ES8388_ADCDLL_PDN_NORMAL | ES8388_DAC_STM_RST_NORMAL | ES8388_ADC_STM_RST_NORMAL | ES8388_DAC_DIGPDN_NORMAL | ES8388_ADC_DIGPDN_NORMAL); /* Disable the internal DLL to improve 8K sample rate */ es8388_writereg(priv, 0x35, 0xa0); es8388_writereg(priv, 0x37, 0xd0); es8388_writereg(priv, 0x39, 0xd0); es8388_writereg(priv, ES8388_MASTERMODE, ES8388_BCLKDIV(ES_MCLK_DIV_AUTO) | ES8388_BCLK_INV_NORMAL | ES8388_MCLKDIV2_NODIV | ES8388_MSC_SLAVE); es8388_writereg(priv, ES8388_DACPOWER, ES8388_ROUT2_DISABLE | ES8388_LOUT2_DISABLE | ES8388_ROUT1_DISABLE | ES8388_LOUT1_DISABLE | ES8388_PDNDACR_PWRDN | ES8388_PDNDACL_PWRDN); es8388_writereg(priv, ES8388_CONTROL1, ES8388_VMIDSEL_500K | ES8388_ENREF_DISABLE | ES8388_SEQEN_DISABLE | ES8388_SAMEFS_SAME | ES8388_DACMCLK_ADCMCLK | ES8388_LRCM_ISOLATED | ES8388_SCPRESET_NORMAL); es8388_writereg(priv, ES8388_DACCONTROL1, ES8388_DACFORMAT(ES_I2S_NORMAL) | ES8388_DACWL(ES_WORD_LENGTH_16BITS) | ES8388_DACLRP_NORM_2ND | ES8388_DACLRSWAP_NORMAL); es8388_writereg(priv, ES8388_DACCONTROL2, ES8388_DACFSRATIO(ES_LCLK_DIV_256) | ES8388_DACFSMODE_SINGLE); es8388_writereg(priv, ES8388_DACCONTROL16, ES8388_RMIXSEL_RIN1 | ES8388_LMIXSEL_LIN1); es8388_writereg(priv, ES8388_DACCONTROL17, ES8388_LI2LOVOL(ES8388_MIXER_GAIN_0DB) | ES8388_LI2LO_DISABLE | ES8388_LD2LO_ENABLE); es8388_writereg(priv, ES8388_DACCONTROL20, ES8388_RI2ROVOL(ES8388_MIXER_GAIN_0DB) | ES8388_RI2RO_DISABLE | ES8388_RD2RO_ENABLE); es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_NORMAL | ES8388_ADC_DLL_PWD_NORMAL | ES8388_MCLK_DIS_NORMAL | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_DAC | ES8388_SLRCK_SAME); es8388_writereg(priv, ES8388_DACCONTROL23, ES8388_VROI_1_5K); es8388_writereg(priv, ES8388_DACCONTROL24, ES8388_LOUT1VOL(ES8388_DAC_CHVOL_DB(0))); es8388_writereg(priv, ES8388_DACCONTROL25, ES8388_ROUT1VOL(ES8388_DAC_CHVOL_DB(0))); es8388_writereg(priv, ES8388_DACCONTROL26, ES8388_LOUT2VOL(ES8388_DAC_CHVOL_DB(0))); es8388_writereg(priv, ES8388_DACCONTROL27, ES8388_ROUT2VOL(ES8388_DAC_CHVOL_DB(0))); #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, ES_MODULE_DAC, true); #endif #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME es8388_setvolume(priv, ES_MODULE_DAC, CONFIG_ES8388_OUTPUT_INITVOLUME); #endif if (priv->dac_output == ES8388_DAC_OUTPUT_LINE2) { regconfig = ES_DAC_CHANNEL_LOUT1 | ES_DAC_CHANNEL_ROUT1; } else if (priv->dac_output == ES8388_DAC_OUTPUT_LINE1) { regconfig = ES_DAC_CHANNEL_LOUT2 | ES_DAC_CHANNEL_ROUT2; } else { regconfig = ES_DAC_CHANNEL_LOUT1 | ES_DAC_CHANNEL_ROUT1 | ES_DAC_CHANNEL_LOUT2 | ES_DAC_CHANNEL_ROUT2; } es8388_writereg(priv, ES8388_DACPOWER, regconfig); es8388_writereg(priv, ES8388_ADCPOWER, ES8388_INT1LP_LP | ES8388_FLASHLP_LP | ES8388_PDNADCBIASGEN_LP | ES8388_PDNMICB_PWRDN | ES8388_PDNADCR_PWRDN | ES8388_PDNADCL_PWRDN | ES8388_PDNAINR_PWRDN | ES8388_PDNAINL_PWRDN); es8388_setmicgain(priv, 24); /* +24 dB */ if (priv->adc_input == ES8388_ADC_INPUT_LINE1) { regconfig = ES_ADC_CHANNEL_LINPUT1_RINPUT1; } else if (priv->adc_input == ES8388_ADC_INPUT_LINE2) { regconfig = ES_ADC_CHANNEL_LINPUT2_RINPUT2; } else { regconfig = ES_ADC_CHANNEL_DIFFERENCE; } es8388_writereg(priv, ES8388_ADCCONTROL2, regconfig); es8388_writereg(priv, ES8388_ADCCONTROL3, (1 << 1) | /* Default value of undocumented bit */ ES8388_TRI_NORMAL | ES8388_MONOMIX_STEREO | ES8388_DS_LINPUT1_RINPUT1); es8388_writereg(priv, ES8388_ADCCONTROL4, ES8388_ADCFORMAT(ES_I2S_NORMAL) | ES8388_ADCWL(ES_WORD_LENGTH_16BITS) | ES8388_ADCLRP_NORM_2ND | ES8388_DATSEL_LL); es8388_writereg(priv, ES8388_ADCCONTROL5, ES8388_ADCFSRATIO(ES_LCLK_DIV_256) | ES8388_ADCFSMODE_SINGLE); #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME es8388_setvolume(priv, ES_MODULE_ADC, CONFIG_ES8388_INPUT_INITVOLUME); #endif #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, ES_MODULE_ADC, true); #endif es8388_writereg(priv, ES8388_ADCPOWER, ES8388_INT1LP_LP | ES8388_FLASHLP_NORMAL | ES8388_PDNADCBIASGEN_NORMAL | ES8388_PDNMICB_PWRDN | ES8388_PDNADCR_PWRUP | ES8388_PDNADCL_PWRUP | ES8388_PDNAINR_NORMAL | ES8388_PDNAINL_NORMAL); /* Stop sequence to avoid noise at boot */ if (priv->audio_mode == ES_MODULE_LINE) { es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_NORMAL | ES8388_ADC_DLL_PWD_NORMAL | ES8388_MCLK_DIS_NORMAL | ES8388_OFFSET_DIS_DISABLE | ES8388_SLRCK_SAME | ES8388_LRCK_SEL_DAC); es8388_writereg(priv, ES8388_DACCONTROL16, ES8388_RMIXSEL_RIN1 | ES8388_LMIXSEL_LIN1); es8388_writereg(priv, ES8388_DACCONTROL17, ES8388_LD2LO_ENABLE | ES8388_LI2LO_DISABLE | ES8388_LI2LOVOL(ES8388_MIXER_GAIN_0DB)); es8388_writereg(priv, ES8388_DACCONTROL20, ES8388_RD2RO_ENABLE | ES8388_RI2RO_DISABLE | ES8388_RI2ROVOL(ES8388_MIXER_GAIN_0DB)); goto reset_finish; } if (priv->audio_mode == ES_MODULE_DAC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACPOWER, ES8388_ROUT2_DISABLE | ES8388_LOUT2_DISABLE | ES8388_ROUT1_DISABLE | ES8388_LOUT1_DISABLE | ES8388_PDNDACR_PWRUP | ES8388_PDNDACL_PWRUP); } if (priv->audio_mode == ES_MODULE_ADC || priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_ADCPOWER, ES8388_INT1LP_LP | ES8388_FLASHLP_LP | ES8388_PDNADCBIASGEN_LP | ES8388_PDNMICB_PWRDN | ES8388_PDNADCR_PWRDN | ES8388_PDNADCL_PWRDN | ES8388_PDNAINR_PWRDN | ES8388_PDNAINL_PWRDN); } if (priv->audio_mode == ES_MODULE_ADC_DAC) { es8388_writereg(priv, ES8388_DACCONTROL21, ES8388_DAC_DLL_PWD_PWRDN | ES8388_ADC_DLL_PWD_PWRDN | ES8388_MCLK_DIS_DISABLE | ES8388_OFFSET_DIS_DISABLE | ES8388_LRCK_SEL_DAC | ES8388_SLRCK_SAME); } reset_finish: #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME es8388_setvolume(priv, ES_MODULE_DAC, CONFIG_ES8388_OUTPUT_INITVOLUME); #endif #ifndef CONFIG_AUDIO_EXCLUDE_MUTE es8388_setmute(priv, ES_MODULE_DAC, true); #endif es8388_dump_registers(&priv->dev, "After reset"); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: es8388_initialize * * Description: * Initialize the ES8388 device. * * Input Parameters: * i2c - An I2C driver instance. * i2s - An I2S driver instance. * lower - Persistent board configuration data. * * Returned Value: * A new lower half audio interface for the ES8388 device is returned on * success; NULL is returned on failure. * ****************************************************************************/ FAR struct audio_lowerhalf_s * es8388_initialize(FAR struct i2c_master_s *i2c, FAR struct i2s_dev_s *i2s, FAR const struct es8388_lower_s *lower) { FAR struct es8388_dev_s *priv; audinfo("Initializing ES8388\n"); /* Sanity check */ DEBUGASSERT(i2c && i2s && lower); /* Allocate a ES8388 device structure */ priv = kmm_zalloc(sizeof(struct es8388_dev_s)); if (priv) { priv->dev.ops = &g_audioops; priv->lower = lower; priv->i2c = i2c; priv->i2s = i2s; nxmutex_init(&priv->pendlock); dq_init(&priv->pendq); dq_init(&priv->doneq); audinfo("ES8388: address=%02x frequency=%" PRId32 "\n", lower->address, lower->frequency); /* Reset and reconfigure the ES8388 hardware */ es8388_dump_registers(&priv->dev, "Before reset"); es8388_audio_output(priv); es8388_reset(priv); return &priv->dev; } return NULL; }