/**************************************************************************** * arch/mips/include/mips32/irq.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file should never be included directed but, rather, only indirectly * through nuttx/irq.h */ #ifndef __ARCH_MIPS_INCLUDE_MIPS32_IRQ_H #define __ARCH_MIPS_INCLUDE_MIPS32_IRQ_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include /**************************************************************************** * Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* The global pointer (GP) does not need to be saved in the "normal," flat * NuttX build. However, it would be necessary to save the GP if this is * a KERNEL build or if NXFLAT is supported. */ #undef MIPS32_SAVE_GP #if defined(CONFIG_NUTTX_KERNEL) || defined(CONFIG_NXFLAT) # define MIPS32_SAVE_GP 1 #endif /* Register save state structure ********************************************/ /* Co processor registers */ #define REG_MFLO_NDX 0 #define REG_MFHI_NDX 1 #define REG_EPC_NDX 2 #define REG_STATUS_NDX 3 /* General pupose registers */ /* $0: Zero register does not need to be saved */ /* $1: at_reg, assembler temporary */ #define REG_R1_NDX 4 /* $2-$3 = v0-v1: Return value registers */ #define REG_R2_NDX 5 #define REG_R3_NDX 6 /* $4-$7 = a0-a3: Argument registers */ #define REG_R4_NDX 7 #define REG_R5_NDX 8 #define REG_R6_NDX 9 #define REG_R7_NDX 10 /* $8-$15 = t0-t7: Volatile registers */ #define REG_R8_NDX 11 #define REG_R9_NDX 12 #define REG_R10_NDX 13 #define REG_R11_NDX 14 #define REG_R12_NDX 15 #define REG_R13_NDX 16 #define REG_R14_NDX 17 #define REG_R15_NDX 18 /* $16-$23 = s0-s7: Static registers */ #define REG_R16_NDX 19 #define REG_R17_NDX 20 #define REG_R18_NDX 21 #define REG_R19_NDX 22 #define REG_R20_NDX 23 #define REG_R21_NDX 24 #define REG_R22_NDX 25 #define REG_R23_NDX 26 /* $24-25 = t8-t9: More Volatile registers */ #define REG_R24_NDX 27 #define REG_R25_NDX 28 /* $26-$27 = ko-k1: Reserved for use in exeption handers. These do not need * to be saved. */ /* $28 = gp: Only needs to be saved under conditions where there are * multiple, per-thread values for the GP. */ #ifdef MIPS32_SAVE_GP # define REG_R28_NDX 29 /* $29 = sp: The value of the stack pointer on return from the exception */ # define REG_R29_NDX 30 /* $30 = either s8 or fp: Depends if a frame pointer is used or not */ # define REG_R30_NDX 31 /* $31 = ra: Return address */ # define REG_R31_NDX 32 # define XCPTCONTEXT_REGS 33 #else /* $29 = sp: The value of the stack pointer on return from the exception */ # define REG_R29_NDX 29 /* $30 = either s8 or fp: Depends if a frame pointer is used or not */ # define REG_R30_NDX 30 /* $31 = ra: Return address */ # define REG_R31_NDX 31 # define XCPTCONTEXT_REGS 32 #endif #define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS) /* In assembly language, values have to be referenced as byte address * offsets. But in C, it is more convenient to reference registers as * register save table offsets. */ #ifdef __ASSEMBLY__ # define REG_MFLO (4*REG_MFLO_NDX) # define REG_MFHI (4*REG_MFHI_NDX) # define REG_EPC (4*REG_EPC_NDX) # define REG_STATUS (4*REG_STATUS_NDX) # define REG_R1 (4*REG_R1_NDX) # define REG_R2 (4*REG_R2_NDX) # define REG_R3 (4*REG_R3_NDX) # define REG_R4 (4*REG_R4_NDX) # define REG_R5 (4*REG_R5_NDX) # define REG_R6 (4*REG_R6_NDX) # define REG_R7 (4*REG_R7_NDX) # define REG_R8 (4*REG_R8_NDX) # define REG_R9 (4*REG_R9_NDX) # define REG_R10 (4*REG_R10_NDX) # define REG_R11 (4*REG_R11_NDX) # define REG_R12 (4*REG_R12_NDX) # define REG_R13 (4*REG_R13_NDX) # define REG_R14 (4*REG_R14_NDX) # define REG_R15 (4*REG_R15_NDX) # define REG_R16 (4*REG_R16_NDX) # define REG_R17 (4*REG_R17_NDX) # define REG_R18 (4*REG_R18_NDX) # define REG_R19 (4*REG_R19_NDX) # define REG_R20 (4*REG_R20_NDX) # define REG_R21 (4*REG_R21_NDX) # define REG_R22 (4*REG_R22_NDX) # define REG_R23 (4*REG_R23_NDX) # define REG_R24 (4*REG_R24_NDX) # define REG_R25 (4*REG_R25_NDX) # ifdef MIPS32_SAVE_GP # define REG_R28 (4*REG_R28_NDX) # endif # define REG_R29 (4*REG_R29_NDX) # define REG_R30 (4*REG_R30_NDX) # define REG_R31 (4*REG_R31_NDX) #else # define REG_MFLO REG_MFLO_NDX # define REG_MFHI REG_MFHI_NDX # define REG_EPC REG_EPC_NDX # define REG_STATUS REG_STATUS_NDX # define REG_R1 REG_R1_NDX # define REG_R2 REG_R2_NDX # define REG_R3 REG_R3_NDX # define REG_R4 REG_R4_NDX # define REG_R5 REG_R5_NDX # define REG_R6 REG_R6_NDX # define REG_R7 REG_R7_NDX # define REG_R8 REG_R8_NDX # define REG_R9 REG_R9_NDX # define REG_R10 REG_R10_NDX # define REG_R11 REG_R11_NDX # define REG_R12 REG_R12_NDX # define REG_R13 REG_R13_NDX # define REG_R14 REG_R14_NDX # define REG_R15 REG_R15_NDX # define REG_R16 REG_R16_NDX # define REG_R17 REG_R17_NDX # define REG_R18 REG_R18_NDX # define REG_R19 REG_R19_NDX # define REG_R20 REG_R20_NDX # define REG_R21 REG_R21_NDX # define REG_R22 REG_R22_NDX # define REG_R23 REG_R23_NDX # define REG_R24 REG_R24_NDX # define REG_R25 REG_R25_NDX # ifdef MIPS32_SAVE_GP # define REG_R28 REG_R28_NDX # endif # define REG_R29 REG_R29_NDX # define REG_R30 REG_R30_NDX # define REG_R31 REG_R31_NDX #endif /* Now define more user friendly alternative name that can be used either * in assembly or C contexts. */ /* $1: at_reg, assembler temporary */ #define REG_AT REG_R1 /* $2-$3 = v0-v1: Return value registers */ #define REG_V0 REG_R2 #define REG_V1 REG_R3 /* $4-$7 = a0-a3: Argument registers */ #define REG_A0 REG_R4 #define REG_A1 REG_R5 #define REG_A2 REG_R6 #define REG_A3 REG_R7 /* $8-$15 = t0-t7: Volatile registers */ #define REG_T0 REG_R8 #define REG_T1 REG_R9 #define REG_T2 REG_R10 #define REG_T3 REG_R11 #define REG_T4 REG_R12 #define REG_T5 REG_R13 #define REG_T6 REG_R14 #define REG_T7 REG_R15 /* $16-$23 = s0-s7: Static registers */ #define REG_S0 REG_R16 #define REG_S1 REG_R17 #define REG_S2 REG_R18 #define REG_S3 REG_R19 #define REG_S4 REG_R20 #define REG_S5 REG_R21 #define REG_S6 REG_R22 #define REG_S7 REG_R23 /* $24-25 = t8-t9: More Volatile registers */ #define REG_T8 REG_R24 #define REG_T9 REG_R25 /* $28 = gp: Only needs to be saved under conditions where there are * multiple, per-thread values for the GP. */ #ifdef MIPS32_SAVE_GP # define REG_GP REG_R28 #endif /* $29 = sp: The value of the stack pointer on return from the exception */ #define REG_SP REG_R29 /* $30 = either s8 or fp: Depends if a frame pointer is used or not */ #define REG_S8 REG_R30 #define REG_FP REG_R30 /* $31 = ra: Return address */ #define REG_RA REG_R31 /**************************************************************************** * Public Types ****************************************************************************/ #ifndef __ASSEMBLY__ struct xcptcontext { /* The following function pointer is non-NULL if there are pending signals * to be processed. */ #ifndef CONFIG_DISABLE_SIGNALS void *sigdeliver; /* Actual type is sig_deliver_t */ /* These additional register save locations are used to implement the * signal delivery trampoline. */ uint32_t saved_epc; /* Trampoline PC */ uint32_t saved_status; /* Status with interrupts disabled. */ #endif /* Register save area */ uint32_t regs[XCPTCONTEXT_REGS]; }; /**************************************************************************** * Inline functions ****************************************************************************/ /**************************************************************************** * Name: cp0_getstatus * * Description: * Disable interrupts * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ static inline irqstate_t cp0_getstatus(void) { register irqstate_t status; __asm__ __volatile__ ( "\t.set push\n" "\t.set noat\n" "\t mfc0 %0,$12\n" /* Get CP0 status register */ "\t.set pop\n" : "=r" (status) : : "memory" ); return status; } /**************************************************************************** * Name: cp0_putstatus * * Description: * Disable interrupts * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ static inline void cp0_putstatus(irqstate_t status) { __asm__ __volatile__ ( "\t.set push\n" "\t.set noat\n" "\t.set noreorder\n" "\tmtc0 %0,$12\n" /* Set the status to the provided value */ "\tnop\n" /* MTC0 status hazard: */ "\tnop\n" /* Recommended spacing: 3 */ "\tnop\n" "\tnop\n" /* Plus one for good measure */ "\t.set pop\n" : : "r" (status) : "memory" ); } /**************************************************************************** * Public Variables ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Name: irqsave * * Description: * Save the current interrupt state and disable interrupts. * * Input Parameters: * None * * Returned Value: * Interrupt state prior to disabling interrupts. * ****************************************************************************/ EXTERN irqstate_t irqsave(void); /**************************************************************************** * Name: irqrestore * * Description: * Restore the previous interrupt state (i.e., the one previously returned * by irqsave()) * * Input Parameters: * state - The interrupt state to be restored. * * Returned Value: * None * ****************************************************************************/ EXTERN void irqrestore(irqstate_t irqtate); #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY */ #endif /* __ARCH_MIPS_INCLUDE_MIPS32_IRQ_H */