/**************************************************************************** * drivers/ioexpander/mcp23x17.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "mcp23x17.h" #if defined(CONFIG_IOEXPANDER_MCP23X17) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef CONFIG_I2C # warning I2C support is required (CONFIG_I2C) #endif #if (!defined CONFIG_SCHED_WORKQUEUE) && (defined CONFIG_MCP23X17_INT_ENABLE) # error Work queue support is required (CONFIG_SCHED_WORKQUEUE) #endif #if (!defined CONFIG_SCHED_HPWORK) && (defined CONFIG_MCP23X17_INT_ENABLE) # error High-Priority Work support is required (CONFIG_SCHED_HPWORK) #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static inline int mcp23x17_write(FAR struct mcp23x17_dev_s *priv, FAR const uint8_t *wbuffer, int wbuflen); static inline int mcp23x17_writeread(FAR struct mcp23x17_dev_s *priv, FAR const uint8_t *wbuffer, int wbuflen, FAR uint8_t *rbuffer, int rbuflen); static int mcp23x17_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int dir); static int mcp23x17_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, void *val); static int mcp23x17_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value); static int mcp23x17_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value); static int mcp23x17_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value); #ifdef CONFIG_IOEXPANDER_MULTIPIN static int mcp23x17_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); static int mcp23x17_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); static int mcp23x17_multireadbuf(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE static FAR void *mcp23x17_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback, FAR void *arg); static int mcp23x17_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle); #endif /**************************************************************************** * Private Data ****************************************************************************/ #ifndef CONFIG_MCP23X17_MULTIPLE /* If only a single MCP23X17 device is supported, then the driver state * structure may as well be pre-allocated. */ static struct mcp23x17_dev_s g_mcp23x17; /* Otherwise, we will need to maintain allocated driver instances in a list */ #else static struct mcp23x17_dev_s *g_mcp23x17list; #endif /* I/O expander vtable */ static const struct ioexpander_ops_s g_mcp23x17_ops = { mcp23x17_direction, mcp23x17_option, mcp23x17_writepin, mcp23x17_readpin, mcp23x17_readbuf #ifdef CONFIG_IOEXPANDER_MULTIPIN , mcp23x17_multiwritepin , mcp23x17_multireadpin , mcp23x17_multireadbuf #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE , mcp23x17_attach , mcp23x17_detach #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mcp23x17_lock * * Description: * Get exclusive access to the MCP23X17 * ****************************************************************************/ static int mcp23x17_lock(FAR struct mcp23x17_dev_s *priv) { return nxsem_wait_uninterruptible(&priv->exclsem); } #define mcp23x17_unlock(p) nxsem_post(&(p)->exclsem) /**************************************************************************** * Name: mcp23x17_write * * Description: * Write to the I2C device. * ****************************************************************************/ static inline int mcp23x17_write(FAR struct mcp23x17_dev_s *priv, FAR const uint8_t *wbuffer, int wbuflen) { struct i2c_msg_s msg; int ret; /* Setup for the transfer */ msg.frequency = priv->config->frequency; msg.addr = priv->config->address; msg.flags = 0; msg.buffer = (FAR uint8_t *)wbuffer; /* Override const */ msg.length = wbuflen; /* Then perform the transfer. */ ret = I2C_TRANSFER(priv->i2c, &msg, 1); return (ret >= 0) ? OK : ret; } /**************************************************************************** * Name: mcp23x17_writeread * * Description: * Write to then read from the I2C device. * ****************************************************************************/ static inline int mcp23x17_writeread(FAR struct mcp23x17_dev_s *priv, FAR const uint8_t *wbuffer, int wbuflen, FAR uint8_t *rbuffer, int rbuflen) { struct i2c_config_s config; /* Set up the configuration and perform the write-read operation */ config.frequency = priv->config->frequency; config.address = priv->config->address; config.addrlen = 7; return i2c_writeread(priv->i2c, &config, wbuffer, wbuflen, rbuffer, rbuflen); } /**************************************************************************** * Name: mcp23x17_setbit * * Description: * Write a bit in a register pair * ****************************************************************************/ static int mcp23x17_setbit(FAR struct mcp23x17_dev_s *priv, uint8_t addr, uint8_t pin, bool bitval) { uint8_t buf[2]; int ret; if (pin > 15) { return -ENXIO; } else if (pin > 7) { addr += 1; pin -= 8; } buf[0] = addr; #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Get the shadowed register value */ buf[1] = priv->sreg[addr]; #else /* Get the register value from the IO-Expander */ ret = mcp23x17_writeread(priv, &buf[0], 1, &buf[1], 1); if (ret < 0) { return ret; } #endif if (bitval) { buf[1] |= (1 << pin); } else { buf[1] &= ~(1 << pin); } #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Save the new register value in the shadow register */ priv->sreg[addr] = buf[1]; #endif ret = mcp23x17_write(priv, buf, 2); #ifdef CONFIG_MCP23X17_RETRY if (ret != OK) { /* Try again (only once) */ ret = mcp23x17_write(priv, buf, 2); } #endif return ret; } /**************************************************************************** * Name: mcp23x17_getbit * * Description: * Get a bit from a register pair * ****************************************************************************/ static int mcp23x17_getbit(FAR struct mcp23x17_dev_s *priv, uint8_t addr, uint8_t pin, FAR bool *val) { uint8_t buf; int ret; if (pin > 15) { return -ENXIO; } else if (pin > 7) { addr += 1; pin -= 8; } ret = mcp23x17_writeread(priv, &addr, 1, &buf, 1); if (ret < 0) { return ret; } #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Save the new register value in the shadow register */ priv->sreg[addr] = buf; #endif *val = (buf >> pin) & 1; return OK; } /**************************************************************************** * Name: mcp23x17_direction * * Description: * Set the direction of an ioexpander pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * dir - One of the IOEXPANDER_DIRECTION_ macros * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int direction) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; if (direction != IOEXPANDER_DIRECTION_IN && direction != IOEXPANDER_DIRECTION_OUT) { return -EINVAL; } /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_setbit(priv, MCP23X17_IODIRA, pin, (direction == IOEXPANDER_DIRECTION_IN)); mcp23x17_unlock(priv); return ret; } /**************************************************************************** * Name: mcp23x17_option * * Description: * Set pin options. Required. * Since all IO expanders have various pin options, this API allows setting * pin options in a flexible way. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * opt - One of the IOEXPANDER_OPTION_ macros * val - The option's value * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, FAR void *value) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret = -EINVAL; if (opt == IOEXPANDER_OPTION_INVERT) { /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_setbit(priv, MCP23X17_IPOLA, pin, ((uintptr_t)value == IOEXPANDER_VAL_INVERT)); mcp23x17_unlock(priv); } return ret; } /**************************************************************************** * Name: mcp23x17_writepin * * Description: * Set the pin level. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * val - The pin level. Usually TRUE will set the pin high, * except if OPTION_INVERT has been set on this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_setbit(priv, MCP23X17_GPIOA, pin, value); mcp23x17_unlock(priv); return ret; } /**************************************************************************** * Name: mcp23x17_readpin * * Description: * Read the actual PIN level. This can be different from the last value * written to this pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the pin level is stored. Usually TRUE * if the pin is high, except if OPTION_INVERT has been set on * this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_getbit(priv, MCP23X17_GPIOA, pin, value); mcp23x17_unlock(priv); return ret; } /**************************************************************************** * Name: mcp23x17_readbuf * * Description: * Read the buffered pin level. * This can be different from the actual pin state. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the level is stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_getbit(priv, MCP23X17_GPIOA, pin, value); mcp23x17_unlock(priv); return ret; } #ifdef CONFIG_IOEXPANDER_MULTIPIN /**************************************************************************** * Name: mcp23x17_getmultibits * * Description: * Read multiple bits from MCP23X17 registers. * ****************************************************************************/ static int mcp23x17_getmultibits(FAR struct mcp23x17_dev_s *priv, uint8_t addr, FAR uint8_t *pins, FAR bool *values, int count) { uint8_t buf[2]; int ret = OK; int i; int index; int pin; ret = mcp23x17_writeread(priv, &addr, 1, buf, 2); if (ret < 0) { return ret; } #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Save the new register value in the shadow register */ priv->sreg[addr] = buf[0]; priv->sreg[addr + 1] = buf[1]; #endif /* Read the requested bits */ for (i = 0; i < count; i++) { index = 0; pin = pins[i]; if (pin > 15) { return -ENXIO; } else if (pin > 7) { index = 1; pin -= 8; } values[i] = (buf[index] >> pin) & 1; } return OK; } /**************************************************************************** * Name: mcp23x17_multiwritepin * * Description: * Set the pin level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pins - The list of pin indexes to alter in this call * val - The list of pin levels. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; uint8_t addr = MCP23X17_GPIOA; uint8_t buf[3]; int ret; int i; int index; int pin; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } /* Start by reading both registers, whatever the pins to change. We could * attempt to read one port only if all pins were on the same port, but * this would not save much. */ #ifndef CONFIG_MCP23X17_SHADOW_MODE ret = mcp23x17_writeread(priv, &addr, 1, &buf[1], 2); if (ret < 0) { mcp23x17_unlock(priv); return ret; } #else /* In Shadow-Mode we "read" the pin status from the shadow registers */ buf[1] = priv->sreg[addr]; buf[2] = priv->sreg[addr + 1]; #endif /* Apply the user defined changes */ for (i = 0; i < count; i++) { index = 1; pin = pins[i]; if (pin > 15) { mcp23x17_unlock(priv); return -ENXIO; } else if (pin > 7) { index = 2; pin -= 8; } if (values[i]) { buf[index] |= (1 << pin); } else { buf[index] &= ~(1 << pin); } } /* Now write back the new pins states */ buf[0] = addr; #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Save the new register values in the shadow register */ priv->sreg[addr] = buf[1]; priv->sreg[addr + 1] = buf[2]; #endif ret = mcp23x17_write(priv, buf, 3); mcp23x17_unlock(priv); return ret; } /**************************************************************************** * Name: mcp23x17_multireadpin * * Description: * Read the actual level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pin - The list of pin indexes to read * valptr - Pointer to a buffer where the pin levels are stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_getmultibits(priv, MCP23X17_GPIOA, pins, values, count); mcp23x17_unlock(priv); return ret; } /**************************************************************************** * Name: mcp23x17_multireadbuf * * Description: * Read the buffered level of multiple pins. This routine may be faster * than individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the buffered levels are stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_multireadbuf(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } ret = mcp23x17_getmultibits(priv, MCP23X17_GPIOA, pins, values, count); mcp23x17_unlock(priv); return ret; } #endif #ifdef CONFIG_MCP23X17_INT_ENABLE /**************************************************************************** * Name: mcp23x17_attach * * Description: * Attach and enable a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * pinset - The set of pin events that will generate the callback * callback - The pointer to callback function. NULL will detach the * callback. * arg - User-provided callback argument * * Returned Value: * A non-NULL handle value is returned on success. This handle may be * used later to detach and disable the pin interrupt. * ****************************************************************************/ static FAR void *mcp23x17_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback, FAR void *arg) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; FAR void *handle = NULL; int i; int ret; /* Get exclusive access to the MCP23X17 */ ret = mcp23x17_lock(priv); if (ret < 0) { return ret; } /* Find and available in entry in the callback table */ for (i = 0; i < CONFIG_MCP23X17_INT_NCALLBACKS; i++) { /* Is this entry available (i.e., no callback attached) */ if (priv->cb[i].cbfunc == NULL) { /* Yes.. use this entry */ priv->cb[i].pinset = pinset; priv->cb[i].cbfunc = callback; priv->cb[i].cbarg = arg; handle = &priv->cb[i]; break; } } /* Add this callback to the table */ mcp23x17_unlock(priv); return handle; } /**************************************************************************** * Name: mcp23x17_detach * * Description: * Detach and disable a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * handle - The non-NULL opaque value return by mcp23x17_attch() * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int mcp23x17_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)dev; FAR struct mcp23x17_callback_s *cb = (FAR struct mcp23x17_callback_s *)handle; DEBUGASSERT(priv != NULL && cb != NULL); DEBUGASSERT((uintptr_t)cb >= (uintptr_t)&priv->cb[0] && (uintptr_t)cb <= (uintptr_t)&priv->cb[CONFIG_TCA64XX_INT_NCALLBACKS - 1]); UNUSED(priv); cb->pinset = 0; cb->cbfunc = NULL; cb->cbarg = NULL; return OK; } /**************************************************************************** * Name: mcp23x17_irqworker * * Description: * Handle GPIO interrupt events (this function actually executes in the * context of the worker thread). * ****************************************************************************/ static void mcp23x17_irqworker(void *arg) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)arg; uint8_t addr = MCP23X17_GPIOA; uint8_t buf[2]; ioe_pinset_t pinset; int ret; int i; /* Read inputs */ ret = mcp23x17_writeread(priv, &addr, 1, buf, 2); if (ret == OK) { #ifdef CONFIG_MCP23X17_SHADOW_MODE /* Don't forget to update the shadow registers at this point */ priv->sreg[addr] = buf[0]; priv->sreg[addr + 1] = buf[1]; #endif /* Create a 16-bit pinset */ pinset = ((unsigned int)buf[0] << 8) | buf[1]; /* Perform pin interrupt callbacks */ for (i = 0; i < CONFIG_MCP23X17_INT_NCALLBACKS; i++) { /* Is this entry valid (i.e., callback attached)? If so, did * any of the requested pin interrupts occur? */ if (priv->cb[i].cbfunc != NULL) { /* Did any of the requested pin interrupts occur? */ ioe_pinset_t match = pinset & priv->cb[i].pinset; if (match != 0) { /* Yes.. perform the callback */ priv->cb[i].cbfunc(&priv->dev, match, priv->cb[i].cbarg); } } } } /* Re-enable interrupts */ priv->config->enable(priv->config, TRUE); } /**************************************************************************** * Name: mcp23x17_interrupt * * Description: * Handle GPIO interrupt events (this function executes in the * context of the interrupt). * ****************************************************************************/ static int mcp23x17_interrupt(int irq, FAR void *context, FAR void *arg) { FAR struct mcp23x17_dev_s *priv = (FAR struct mcp23x17_dev_s *)arg; /* In complex environments, we cannot do I2C transfers from the interrupt * handler because semaphores are probably used to lock the I2C bus. In * this case, we will defer processing to the worker thread. This is also * much kinder in the use of system resources and is, therefore, probably * a good thing to do in any event. */ /* Notice that further GPIO interrupts are disabled until the work is * actually performed. This is to prevent overrun of the worker thread. * Interrupts are re-enabled in mcp23x17_irqworker() when the work is * completed. */ if (work_available(&priv->work)) { priv->config->enable(priv->config, FALSE); work_queue(HPWORK, &priv->work, mcp23x17_irqworker, (FAR void *)priv, 0); } return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mcp23x17_initialize * * Description: * Initialize a MCP23X17 I2C device. * * TODO: Add support for more than one device. * ****************************************************************************/ FAR struct ioexpander_dev_s *mcp23x17_initialize( FAR struct i2c_master_s *i2cdev, FAR struct mcp23x17_config_s *config) { FAR struct mcp23x17_dev_s *priv; DEBUGASSERT(i2cdev != NULL && config != NULL); #ifdef CONFIG_MCP23X17_MULTIPLE /* Allocate the device state structure */ priv = (FAR struct mcp23x17_dev_s *) kmm_zalloc(sizeof(struct mcp23x17_dev_s)); if (!priv) { return NULL; } /* And save the device structure in the list of MCP23X17 so that we can * find it later. */ priv->flink = g_mcp23x17list; g_mcp23x17list = priv; #else /* Use the global MCP23X17 driver instance */ priv = &g_mcp23x17; #endif /* Initialize the device state structure */ priv->i2c = i2cdev; priv->dev.ops = &g_mcp23x17_ops; priv->config = config; #ifdef CONFIG_MCP23X17_INT_ENABLE priv->config->attach(priv->config, mcp23x17_interrupt, priv); priv->config->enable(priv->config, TRUE); #endif nxsem_init(&priv->exclsem, 0, 1); return &priv->dev; } #endif /* CONFIG_IOEXPANDER_MCP23X17 */