/******************************************************************************************** * arch/arm/src/stm32/stm32_usbhost.c * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ********************************************************************************************/ /******************************************************************************************** * Included Files ********************************************************************************************/ #include #include #include #include #include "stm32_usbhost.h" #ifdef HAVE_USBHOST_TRACE /******************************************************************************************** * Pre-processor Definitions ********************************************************************************************/ #define TR_FMT1 false #define TR_FMT2 true #define TRENTRY(id,fmt1,string) {string} #ifndef NULL # define NULL ((FAR void *)0) #endif /******************************************************************************************** * Private Types ********************************************************************************************/ struct stm32_usbhost_trace_s { #if 0 uint16_t id; bool fmt2; #endif FAR const char *string; }; /******************************************************************************************** * Private Data ********************************************************************************************/ static const struct stm32_usbhost_trace_s g_trace1[TRACE1_NSTRINGS] = { #ifdef CONFIG_STM32_OTGFS TRENTRY(OTGFS_TRACE1_DEVDISCONN, TR_FMT1, "OTGFS ERROR: Host Port %d. Device disconnected\n"), TRENTRY(OTGFS_TRACE1_IRQATTACH, TR_FMT1, "OTGFS ERROR: Failed to attach IRQ\n"), TRENTRY(OTGFS_TRACE1_TRNSFRFAILED, TR_FMT1, "OTGFS ERROR: Transfer Failed. ret=%d\n"), TRENTRY(OTGFS_TRACE1_SENDSETUP, TR_FMT1, "OTGFS ERROR: ctrl_sendsetup() failed with: %d\n"), TRENTRY(OTGFS_TRACE1_SENDDATA, TR_FMT1, "OTGFS ERROR: ctrl_senddata() failed with: %d\n"), TRENTRY(OTGFS_TRACE1_RECVDATA, TR_FMT1, "OTGFS ERROR: ctrl_recvdata() failed with: %d\n"), # ifdef HAVE_USBHOST_TRACE_VERBOSE TRENTRY(OTGFS_VTRACE1_CONNECTED, TR_FMT1, "OTGFS Host Port %d connected.\n"), TRENTRY(OTGFS_VTRACE1_DISCONNECTED, TR_FMT1, "OTGFS Host Port %d disconnected.\n"), TRENTRY(OTGFS_VTRACE1_GINT, TR_FMT1, "OTGFS Handling Interrupt. Entry Point.\n"), TRENTRY(OTGFS_VTRACE1_GINT_SOF, TR_FMT1, "OTGFS Handle the start of frame interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_RXFLVL, TR_FMT1, "OTGFS Handle the RxFIFO non-empty interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_NPTXFE, TR_FMT1, "OTGFS Handle the non-periodic TxFIFO empty interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_PTXFE, TR_FMT1, "OTGFS Handle the periodic TxFIFO empty interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HC, TR_FMT1, "OTGFS Handle the host channels interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT, TR_FMT1, "OTGFS Handle the host port interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_POCCHNG, TR_FMT1, "OTGFS HPRT: Port Over-Current Change.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_PCDET, TR_FMT1, "OTGFS HPRT: Port Connect Detect.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_PENCHNG, TR_FMT1, "OTGFS HPRT: Port Enable Changed.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_LSDEV, TR_FMT1, "OTGFS HPRT: Low Speed Device Connected.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_FSDEV, TR_FMT1, "OTGFS HPRT: Full Speed Device Connected.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_LSFSSW, TR_FMT1, "OTGFS HPRT: Host Switch: LS -> FS.\n"), TRENTRY(OTGFS_VTRACE1_GINT_HPRT_FSLSSW, TR_FMT1, "OTGFS HPRT: Host Switch: FS -> LS.\n"), TRENTRY(OTGFS_VTRACE1_GINT_DISC, TR_FMT1, "OTGFS Handle the disconnect detected interrupt.\n"), TRENTRY(OTGFS_VTRACE1_GINT_IPXFR, TR_FMT1, "OTGFS Handle the incomplete periodic transfer.\n"), # endif #endif #ifdef CONFIG_STM32_OTGHS TRENTRY(OTGHS_TRACE1_DEVDISCONN, TR_FMT1, "OTGHS ERROR: Host Port %d. Device disconnected\n"), TRENTRY(OTGHS_TRACE1_IRQATTACH, TR_FMT1, "OTGHS ERROR: Failed to attach IRQ\n"), TRENTRY(OTGHS_TRACE1_TRNSFRFAILED, TR_FMT1, "OTGHS ERROR: Transfer Failed. ret=%d\n"), TRENTRY(OTGHS_TRACE1_SENDSETUP, TR_FMT1, "OTGHS ERROR: ctrl_sendsetup() failed with: %d\n"), TRENTRY(OTGHS_TRACE1_SENDDATA, TR_FMT1, "OTGHS ERROR: ctrl_senddata() failed with: %d\n"), TRENTRY(OTGHS_TRACE1_RECVDATA, TR_FMT1, "OTGHS ERROR: ctrl_recvdata() failed with: %d\n"), # ifdef HAVE_USBHOST_TRACE_VERBOSE TRENTRY(OTGHS_VTRACE1_CONNECTED, TR_FMT1, "OTGHS Host Port %d connected.\n"), TRENTRY(OTGHS_VTRACE1_DISCONNECTED, TR_FMT1, "OTGHS Host Port %d disconnected.\n"), TRENTRY(OTGHS_VTRACE1_GINT, TR_FMT1, "OTGHS Handling Interrupt. Entry Point.\n"), TRENTRY(OTGHS_VTRACE1_GINT_SOF, TR_FMT1, "OTGHS Handle the start of frame interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_RXFLVL, TR_FMT1, "OTGHS Handle the RxFIFO non-empty interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_NPTXFE, TR_FMT1, "OTGHS Handle the non-periodic TxFIFO empty interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_PTXFE, TR_FMT1, "OTGHS Handle the periodic TxFIFO empty interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HC, TR_FMT1, "OTGHS Handle the host channels interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT, TR_FMT1, "OTGHS Handle the host port interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_POCCHNG, TR_FMT1, "OTGHS HPRT: Port Over-Current Change.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_PCDET, TR_FMT1, "OTGHS HPRT: Port Connect Detect.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_PENCHNG, TR_FMT1, "OTGHS HPRT: Port Enable Changed.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_LSDEV, TR_FMT1, "OTGHS HPRT: Low Speed Device Connected.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_HSDEV, TR_FMT1, "OTGHS HPRT: Full Speed Device Connected.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_LSHSSW, TR_FMT1, "OTGHS HPRT: Host Switch: LS -> HS.\n"), TRENTRY(OTGHS_VTRACE1_GINT_HPRT_HSLSSW, TR_FMT1, "OTGHS HPRT: Host Switch: HS -> LS.\n"), TRENTRY(OTGHS_VTRACE1_GINT_DISC, TR_FMT1, "OTGHS Handle the disconnect detected interrupt.\n"), TRENTRY(OTGHS_VTRACE1_GINT_IPXFR, TR_FMT1, "OTGHS Handle the incomplete periodic transfer.\n"), # endif #endif }; static const struct stm32_usbhost_trace_s g_trace2[TRACE2_NSTRINGS] = { #ifdef CONFIG_STM32_OTGFS TRENTRY(OTGFS_TRACE2_CLIP, TR_FMT2, "OTGFS CLIP: chidx: %d buflen: %d\n"), # ifdef HAVE_USBHOST_TRACE_VERBOSE TRENTRY(OTGFS_VTRACE2_CHANWAKEUP_IN, TR_FMT2, "OTGFS EP%d(IN) wake up with result: %d\n"), TRENTRY(OTGFS_VTRACE2_CHANWAKEUP_OUT, TR_FMT2, "OTGFS EP%d(OUT) wake up with result: %d\n"), TRENTRY(OTGFS_VTRACE2_CTRLIN, TR_FMT2, "OTGFS CTRL_IN type: %02x req: %02x\n"), TRENTRY(OTGFS_VTRACE2_CTRLOUT, TR_FMT2, "OTGFS CTRL_OUT type: %02x req: %02x\n"), TRENTRY(OTGFS_VTRACE2_INTRIN, TR_FMT2, "OTGFS INTR_IN chidx: %02x len: %02x\n"), TRENTRY(OTGFS_VTRACE2_INTROUT, TR_FMT2, "OTGFS INTR_OUT chidx: %02x len: %02x\n"), TRENTRY(OTGFS_VTRACE2_BULKIN, TR_FMT2, "OTGFS BULK_IN chidx: %02x len: %02x\n"), TRENTRY(OTGFS_VTRACE2_BULKOUT, TR_FMT2, "OTGFS BULK_OUT chidx: %02x len: %02x\n"), TRENTRY(OTGFS_VTRACE2_ISOCIN, TR_FMT2, "OTGFS ISOC_IN chidx: %02x len: %04d\n"), TRENTRY(OTGFS_VTRACE2_ISOCOUT, TR_FMT2, "OTGFS ISOC_OUT chidx: %02x req: %02x\n"), TRENTRY(OTGFS_VTRACE2_STARTTRANSFER, TR_FMT2, "OTGFS Transfer chidx: %d buflen: %d\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_CTRL_IN, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,IN ,CTRL)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_CTRL_OUT, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,OUT,CTRL)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_INTR_IN, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,IN ,INTR)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_INTR_OUT, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,OUT,INTR)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_BULK_IN, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,IN ,BULK)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_BULK_OUT, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,OUT,BULK)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_ISOC_IN, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,IN ,ISOC)\n"), TRENTRY(OTGFS_VTRACE2_CHANCONF_ISOC_OUT, TR_FMT2, "OTGFS Channel configured. chidx: %d: (EP%d,OUT,ISOC)\n"), TRENTRY(OTGFS_VTRACE2_CHANHALT, TR_FMT2, "OTGFS Channel halted. chidx: %d, reason: %d\n"), # endif #endif #ifdef CONFIG_STM32_OTGHS TRENTRY(OTGHS_TRACE2_CLIP, TR_FMT2, "OTGHS CLIP: chidx: %d buflen: %d\n"), # ifdef HAVE_USBHOST_TRACE_VERBOSE TRENTRY(OTGHS_VTRACE2_CHANWAKEUP_IN, TR_FMT2, "OTGHS EP%d(IN) wake up with result: %d\n"), TRENTRY(OTGHS_VTRACE2_CHANWAKEUP_OUT, TR_FMT2, "OTGHS EP%d(OUT) wake up with result: %d\n"), TRENTRY(OTGHS_VTRACE2_CTRLIN, TR_FMT2, "OTGHS CTRL_IN type: %02x req: %02x\n"), TRENTRY(OTGHS_VTRACE2_CTRLOUT, TR_FMT2, "OTGHS CTRL_OUT type: %02x req: %02x\n"), TRENTRY(OTGHS_VTRACE2_INTRIN, TR_FMT2, "OTGHS INTR_IN chidx: %02x len: %02x\n"), TRENTRY(OTGHS_VTRACE2_INTROUT, TR_FMT2, "OTGHS INTR_OUT chidx: %02x len: %02x\n"), TRENTRY(OTGHS_VTRACE2_BULKIN, TR_FMT2, "OTGHS BULK_IN chidx: %02x len: %02x\n"), TRENTRY(OTGHS_VTRACE2_BULKOUT, TR_FMT2, "OTGHS BULK_OUT chidx: %02x len: %02x\n"), TRENTRY(OTGHS_VTRACE2_ISOCIN, TR_FMT2, "OTGHS ISOC_IN chidx: %02x len: %04d\n"), TRENTRY(OTGHS_VTRACE2_ISOCOUT, TR_FMT2, "OTGHS ISOC_OUT chidx: %02x req: %02x\n"), TRENTRY(OTGHS_VTRACE2_STARTTRANSFER, TR_FMT2, "OTGHS Transfer chidx: %d buflen: %d\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_CTRL_IN, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,IN ,CTRL)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_CTRL_OUT, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,OUT,CTRL)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_INTR_IN, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,IN ,INTR)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_INTR_OUT, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,OUT,INTR)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_BULK_IN, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,IN ,BULK)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_BULK_OUT, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,OUT,BULK)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_ISOC_IN, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,IN ,ISOC)\n"), TRENTRY(OTGHS_VTRACE2_CHANCONF_ISOC_OUT, TR_FMT2, "OTGHS Channel configured. chidx: %d: (EP%d,OUT,ISOC)\n"), TRENTRY(OTGHS_VTRACE2_CHANHALT, TR_FMT2, "OTGHS Channel halted. chidx: %d, reason: %d\n"), # endif #endif }; /******************************************************************************************** * Private Function Prototypes ********************************************************************************************/ /******************************************************************************************** * Public Functions ********************************************************************************************/ /******************************************************************************************** * Name: usbhost_trformat1 and usbhost_trformat2 * * Description: * This interface must be provided by platform specific logic that knows * the HCDs encoding of USB trace data. * * Given an 9-bit index, return a format string suitable for use with, say, * printf. The returned format is expected to handle two unsigned integer * values. * ********************************************************************************************/ FAR const char *usbhost_trformat1(uint16_t id) { int ndx = TRACE1_INDEX(id); if (ndx < TRACE1_NSTRINGS) { return g_trace1[ndx].string; } return NULL; } FAR const char *usbhost_trformat2(uint16_t id) { int ndx = TRACE2_INDEX(id); if (ndx < TRACE2_NSTRINGS) { return g_trace2[ndx].string; } return NULL; } #endif /* HAVE_USBHOST_TRACE */