/**************************************************************************** * drivers/serial/serial_io.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_SMP # include #endif #include #include #include #include #include #include /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: uart_xmitchars * * Description: * This function is called from the UART interrupt handler when an * interrupt is received indicating that there is more space in the * transmit FIFO. This function will send characters from the tail of * the xmit buffer while the driver write() logic adds data to the head * of the xmit buffer. * ****************************************************************************/ void uart_xmitchars(FAR uart_dev_t *dev) { uint16_t nbytes = 0; #ifdef CONFIG_SMP irqstate_t flags = enter_critical_section(); #endif /* Send while we still have data in the TX buffer & room in the fifo */ while (dev->xmit.head != dev->xmit.tail && uart_txready(dev)) { /* Send the next byte */ uart_send(dev, dev->xmit.buffer[dev->xmit.tail]); nbytes++; /* Increment the tail index */ if (++(dev->xmit.tail) >= dev->xmit.size) { dev->xmit.tail = 0; } } /* When all of the characters have been sent from the buffer disable the TX * interrupt. * * Potential bug? If nbytes == 0 && (dev->xmit.head == dev->xmit.tail) && * dev->xmitwaiting == true, then disabling the TX interrupt will leave * the uart_write() logic waiting to TX to complete with no TX interrupts. * Can that happen? */ if (dev->xmit.head == dev->xmit.tail) { uart_disabletxint(dev); } /* If any bytes were removed from the buffer, inform any waiters that * there is space available. */ if (nbytes) { uart_datasent(dev); } #ifdef CONFIG_SMP leave_critical_section(flags); #endif } /**************************************************************************** * Name: uart_recvchars * * Description: * This function is called from the UART interrupt handler when an * interrupt is received indicating that are bytes available in the * receive FIFO. This function will add chars to head of receive buffer. * Driver read() logic will take characters from the tail of the buffer. * ****************************************************************************/ void uart_recvchars(FAR uart_dev_t *dev) { FAR struct uart_buffer_s *rxbuf = &dev->recv; #ifdef CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS unsigned int watermark; #endif unsigned int status; int nexthead = rxbuf->head + 1; #if defined(CONFIG_TTY_SIGINT) || defined(CONFIG_TTY_SIGTSTP) || \ defined(CONFIG_TTY_FORCE_PANIC) || defined(CONFIG_TTY_LAUNCH) int signo = 0; #endif uint16_t nbytes = 0; if (nexthead >= rxbuf->size) { nexthead = 0; } #ifdef CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS /* Pre-calculate the watermark level that we will need to test against. */ watermark = (CONFIG_SERIAL_IFLOWCONTROL_UPPER_WATERMARK * rxbuf->size) / 100; #endif /* Loop putting characters into the receive buffer until there are no * further characters to available. */ while (uart_rxavailable(dev)) { bool is_full = (nexthead == rxbuf->tail); char ch; #ifdef CONFIG_SERIAL_IFLOWCONTROL #ifdef CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS unsigned int nbuffered; /* How many bytes are buffered */ if (rxbuf->head >= rxbuf->tail) { nbuffered = rxbuf->head - rxbuf->tail; } else { nbuffered = rxbuf->size - rxbuf->tail + rxbuf->head; } /* Is the level now above the watermark level that we need to report? */ if (nbuffered >= watermark) { /* Let the lower level driver know that the watermark level has * been crossed. It will probably activate RX flow control. */ if (uart_rxflowcontrol(dev, nbuffered, true)) { /* Low-level driver activated RX flow control, exit loop now. */ break; } } #else /* Check if RX buffer is full and allow serial low-level driver to * pause processing. This allows proper utilization of hardware flow * control. */ if (is_full) { if (uart_rxflowcontrol(dev, rxbuf->size, true)) { /* Low-level driver activated RX flow control, exit loop now. */ break; } } #endif #endif /* Get this next character from the hardware */ ch = uart_receive(dev, &status); #if defined(CONFIG_TTY_SIGINT) || defined(CONFIG_TTY_SIGTSTP) || \ defined(CONFIG_TTY_FORCE_PANIC) || defined(CONFIG_TTY_LAUNCH) signo = uart_check_special(dev, &ch, 1); #endif /* If the RX buffer becomes full, then the serial data is discarded. * This is necessary because on most serial hardware, you must read * the data in order to clear the RX interrupt. An option on some * hardware might be to simply disable RX interrupts until the RX * buffer becomes non-FULL. However, that would probably just cause * the overrun to occur in hardware (unless it has some large internal * buffering). */ if (!is_full) { /* Add the character to the buffer */ rxbuf->buffer[rxbuf->head] = ch; nbytes++; /* Increment the head index */ rxbuf->head = nexthead; if (++nexthead >= rxbuf->size) { nexthead = 0; } } } /* If any bytes were added to the buffer, inform any waiters there is new * incoming data available. */ if (nbytes) { uart_datareceived(dev); } #if defined(CONFIG_TTY_SIGINT) || defined(CONFIG_TTY_SIGTSTP) || \ defined(CONFIG_TTY_FORCE_PANIC) || defined(CONFIG_TTY_LAUNCH) /* Send the signal if necessary */ if (signo != 0) { nxsig_kill(dev->pid, signo); uart_reset_sem(dev); } #endif }