# # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # menuconfig DRIVERS_AUDIO bool "Audio Device Support" default n ---help--- Enable support for audio device drivers. This includes drivers for MP3, WMA and Ogg Vorbis encoding, decoding, as well as drivers for interfacing with external DSP chips to perform custom audio functions. NOTE: All of these drivers depend on support from the audio subsystem enabled with the AUDIO selection. if DRIVERS_AUDIO config AUDIO_TONE bool "Audio Tone Generator using PWM" default n depends on PWM && DRIVERS_AUDIO ---help--- This driver enables the Audio Tone Generator for NuttX. if AUDIO_TONE endif # AUDIO_TONE config AUDIO_VS1053 bool "VS1053 codec chip" default n depends on AUDIO ---help--- Select to enable support for the VS1053 Audio codec by VLSI Solutions. This chip provides encoding and decoding of MP3, WMA, AAC and Ogg Vorbis format audio. It also has a general DSP which is user programmable to perform special audio (or any DSP) functions. if AUDIO_VS1053 config VS1053_DEVICE_COUNT int "Number of VS1053 devices attached" default 1 ---help--- Sets the number of VS1053 type devices available to the system. This is required to reserve global, static lower-half driver context pointers for the DREQ ISR to use for lookup when it needs to signal that additional data is being requested. config VS1053_WORKER_STACKSIZE int "VS1053 worker thread stack size" default 768 ---help--- Stack size to use with the VS1053 worker thread. if AUDIO_DRIVER_SPECIFIC_BUFFERS config VS1053_NUM_BUFFERS int "Number of Audio Pipeline Buffers to use" default 2 ---help--- Sets the number of the Audio Pipeline Buffers used to deliver audio data to the VS1053 driver. The minimum you should set this is 2 buffers, which should be adequate for most media types. config VS1053_BUFFER_SIZE int "Size of Audio Pipeline Buffers to use" default 8192 ---help--- Sets the size of the Audio Pipeline Buffers used to deliver audio data to the VS1053 driver. The minimum you should set this is 2048 bytes. The larger the buffer, the better CPU performance. endif # AUDIO_DRIVER_SPECIFIC_BUFFERS endif # AUDIO_VS1053 config AUDIO_CS43L22 bool "CS43L22 audio chip" default n depends on AUDIO ---help--- Select to enable support for the CS43L22 Audio codec by Cirrus Logic. This chip is a lower level audio chip.. basically an exotic D-to-A. It includes no built-in support for audio CODECS The CS43L22 provides: - Low power consumption - High SNR - Stereo digital microphone input - Digital Dynamic Range Controller (compressor / limiter) - Digital sidetone mixing - Ground-referenced headphone driver - Ground-referenced line outputs NOTE: This driver also depends on both I2C and I2S support although that dependency is not explicit here. if AUDIO_CS43L22 config CS43L22_INITVOLUME int "CS43L22 initial volume setting" default 250 config CS43L22_INFLIGHT int "CS43L22 maximum in-flight audio buffers" default 2 config CS43L22_MSG_PRIO int "CS43L22 message priority" default 1 config CS43L22_BUFFER_SIZE int "CS43L22 preferred buffer size" default 8192 config CS43L22_NUM_BUFFERS int "CS43L22 preferred number of buffers" default 4 config CS43L22_WORKER_STACKSIZE int "CS43L22 worker thread stack size" default 768 config CS43L22_REGDUMP bool "CS43L22 register dump" default n ---help--- Enable logic to dump the contents of all CS43L22 registers. config CS43L22_CLKDEBUG bool "CS43L22 clock analysis" default n ---help--- Enable logic to analyze CS43L22 clock configuration. endif # AUDIO_CS43L22 config AUDIO_CS4344 bool "CS4344 audio chip" default n depends on AUDIO ---help--- Select to enable support for the CS4344 Audio codec by Cirrus Logic. This chip is a lower level audio chip.. basically an exotic D-to-A. It includes no built-in support for audio CODECS. if AUDIO_CS4344 config CS4344_INFLIGHT int "CS4344 maximum in-flight audio buffers" default 2 config CS4344_MSG_PRIO int "CS4344 message priority" default 1 config CS4344_BUFFER_SIZE int "CS4344 preferred buffer size" default 8192 config CS4344_NUM_BUFFERS int "CS4344 preferred number of buffers" default 4 config CS4344_WORKER_STACKSIZE int "CS4344 worker thread stack size" default 768 endif # AUDIO_CS4344 config AUDIO_ES8311 bool "ES8311 codec chip" default n depends on AUDIO ---help--- Select to enable support for the ES8311 Audio codec by Everest Semiconductor. NOTE: This driver also depends on both I2C and I2S support although that dependency is not explicit here. if AUDIO_ES8311 config ES8311_INPUT_INITVOLUME int "ES8311 initial input volume setting" default 1000 config ES8311_OUTPUT_INITVOLUME int "ES8311 initial output volume setting" default 400 choice prompt "MCLK source" default ES8311_SRC_MCLK ---help--- Select the source of the MCLK signal. config ES8311_SRC_MCLK bool "From MCLK Pin" config ES8311_SRC_BCLK bool "From BCLK Pin" endchoice config ES8311_INFLIGHT int "ES8311 maximum in-flight audio buffers" default 2 config ES8311_MSG_PRIO int "ES8311 message priority" default 1 config ES8311_BUFFER_SIZE int "ES8311 preferred buffer size" default 8192 config ES8311_NUM_BUFFERS int "ES8311 preferred number of buffers" default 4 config ES8311_WORKER_STACKSIZE int "ES8311 worker thread stack size" default 2048 endif # AUDIO_ES8388 config AUDIO_ES8388 bool "ES8388 codec chip" default n depends on AUDIO select AUDIO_DRIVER_SPECIFIC_BUFFERS ---help--- Select to enable support for the ES8388 Audio codec by Everest Semiconductor. NOTE: This driver also depends on both I2C and I2S support although that dependency is not explicit here. if AUDIO_ES8388 config ES8388_INPUT_INITVOLUME int "ES8388 initial input volume setting" default 1000 config ES8388_OUTPUT_CHANNEL int default 0 if ES8388_OUTPUT_CHANNEL_LINE1 default 1 if ES8388_OUTPUT_CHANNEL_LINE2 default 2 if ES8388_OUTPUT_CHANNEL_ALL choice prompt "ES8388 output channel" default ES8388_OUTPUT_CHANNEL_ALL ---help--- Select the codec channel that will output audio. The actual device that will reproduce the audio signal depends on the board implementation. config ES8388_OUTPUT_CHANNEL_LINE1 bool "Line 1" config ES8388_OUTPUT_CHANNEL_LINE2 bool "Line 2" config ES8388_OUTPUT_CHANNEL_ALL bool "Both" endchoice config ES8388_OUTPUT_INITVOLUME int "ES8388 initial output volume setting" default 400 config ES8388_INPUT_CHANNEL int default 0 if ES8388_INPUT_CHANNEL_LINE1 default 1 if ES8388_INPUT_CHANNEL_LINE2 default 3 if ES8388_INPUT_CHANNEL_DIFFERENTIAL choice prompt "ES8388 input channel" default ES8388_INPUT_CHANNEL_LINE1 ---help--- Select the codec channel that will input audio. The actual device that will reproduce the audio signal depends on the board implementation. The "Differential" option will take the difference between the Line 1 left and right channels. config ES8388_INPUT_CHANNEL_LINE1 bool "Line 1" config ES8388_INPUT_CHANNEL_LINE2 bool "Line 2" config ES8388_INPUT_CHANNEL_DIFFERENTIAL bool "Differential" endchoice config ES8388_INFLIGHT int "ES8388 maximum in-flight audio buffers" default 2 config ES8388_MSG_PRIO int "ES8388 message priority" default 1 config ES8388_BUFFER_SIZE int "ES8388 preferred buffer size" default 8192 config ES8388_NUM_BUFFERS int "ES8388 preferred number of buffers" default 4 config ES8388_WORKER_STACKSIZE int "ES8388 worker thread stack size" default 2048 config ES8388_REGDUMP bool "ES8388 register dump" default n depends on DEBUG_FEATURES ---help--- Enable logic to dump the contents of all ES8388 registers. endif # AUDIO_ES8388 config AUDIO_WM8776 bool "WM8776 audio chip" default n depends on AUDIO ---help--- Select to enable support for the WM8776 Audio codec by Wolfson Microelectonics. if AUDIO_WM8776 config WM8776_INFLIGHT int "WM8776 maximum in-flight audio buffers" default 2 config WM8776_MSG_PRIO int "WM8776 message priority" default 1 config WM8776_WORKER_STACKSIZE int "WM8776 worker thread stack size" default 768 config WM8776_SWAP_HPOUT bool "Swap WM8776 HP out signals" default n endif # AUDIO_WM8776 config AUDIO_WM8994 bool "WM8994 audio chip" default n depends on AUDIO ---help--- Select to enable support for the WM8994 Audio codec by Wolfson Microelectonics. This chip is a lower level audio chip.. basically an exotic D-to-A. It includes no built-in support for audio CODECS The WM8994 provides: - Low power consumption - High SNR - Stereo digital microphone input - Digital Dynamic Range Controller (compressor / limiter) - Digital sidetone mixing - Ground-referenced headphone driver - Ground-referenced line outputs NOTE: This driver also depends on both I2C and I2S support although that dependency is not explicit here. if AUDIO_WM8994 config WM8994_INITVOLUME int "WM8994 initial volume setting" default 250 config WM8994_INFLIGHT int "WM8994 maximum in-flight audio buffers" default 2 config WM8994_MSG_PRIO int "WM8994 message priority" default 1 config WM8994_BUFFER_SIZE int "WM8994 preferred buffer size" default 8192 config WM8994_NUM_BUFFERS int "WM8994 preferred number of buffers" default 4 config WM8994_WORKER_STACKSIZE int "WM8994 worker thread stack size" default 768 config WM8994_REGDUMP bool "WM8994 register dump" default n ---help--- Enable logic to dump the contents of all WM8994 registers. config WM8994_CLKDEBUG bool "WM8994 clock analysis" default n ---help--- Enable logic to analyze WM8994 clock configuration. endif # AUDIO_WM8994 config AUDIO_WM8904 bool "WM8904 audio chip" default n depends on AUDIO ---help--- Select to enable support for the WM8904 Audio codec by Wolfson Microelectonics. This chip is a lower level audio chip.. basically an exotic D-to-A. It includes no built-in support for audio CODECS The WM8904 provides: - Low power consumption - High SNR - Stereo digital microphone input - Digital Dynamic Range Controller (compressor / limiter) - Digital sidetone mixing - Ground-referenced headphone driver - Ground-referenced line outputs NOTE: This driver also depends on both I2C and I2S support although that dependency is not explicit here. if AUDIO_WM8904 config WM8904_INITVOLUME int "WM8904 initial volume setting" default 250 config WM8904_INFLIGHT int "WM8904 maximum in-flight audio buffers" default 2 config WM8904_MSG_PRIO int "WM8904 message priority" default 1 config WM8904_BUFFER_SIZE int "WM8904 preferred buffer size" default 8192 config WM8904_NUM_BUFFERS int "WM8904 preferred number of buffers" default 4 config WM8904_WORKER_STACKSIZE int "WM8904 worker thread stack size" default 768 config WM8904_REGDUMP bool "WM8904 register dump" default n ---help--- Enable logic to dump the contents of all WM8904 registers. config WM8904_CLKDEBUG bool "WM8904 clock analysis" default n ---help--- Enable logic to analyze WM8904 clock configuration. endif # AUDIO_WM8904 config AUDIO_NULL bool "NULL audio device" default n depends on AUDIO ---help--- A do-nothing audio device driver to simplify testing of audio decoders. if AUDIO_NULL config AUDIO_NULL_MSG_PRIO int "Null audio device message priority" default 1 config AUDIO_NULL_BUFFER_SIZE int "Null audio device preferred buffer size" default 8192 config AUDIO_NULL_NUM_BUFFERS int "Null audio device preferred number of buffers" default 4 config AUDIO_NULL_WORKER_STACKSIZE int "Null audio device worker thread stack size" default 768 endif # AUDIO_NULL config AUDIO_I2S bool "Audio I2S" depends on AUDIO depends on I2S config AUDIO_DMA bool "Audio DMA" select AUDIO_DRIVER_SPECIFIC_BUFFERS depends on AUDIO depends on DMA endif # DRIVERS_AUDIO