/**************************************************************************** * drivers/audio/wm8994.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wm8994.h" /* Pre-processor Definitions */ /* Maximum number of retries */ #define MAX_RETRIES 3 #define WM8994_OUTPUT_DEVICE_SPEAKER ((uint16_t)0x0001) #define WM8994_OUTPUT_DEVICE_HEADPHONE ((uint16_t)0x0002) #define WM8994_OUTPUT_DEVICE_BOTH ((uint16_t)0x0003) #define WM8994_OUTPUT_DEVICE_AUTO ((uint16_t)0x0004) #define WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_1 ((uint16_t)0x0100) #define WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_2 ((uint16_t)0x0200) #define WM8994_INPUT_DEVICE_INPUT_LINE_1 ((uint16_t)0x0300) #define WM8994_INPUT_DEVICE_INPUT_LINE_2 ((uint16_t)0x0400) #define WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2 ((uint16_t)0x0800) #define WM8994_DEFAULT_OUTPUT_DEVICE (WM8994_OUTPUT_DEVICE_SPEAKER) #define WM8994_DEFAULT_INPUT_DEVICE (WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2) #define WM8994_STARTUP_MODE_COLD (1) /**************************************************************************** * Private Function Prototypes ****************************************************************************/ #if !defined(CONFIG_WM8994_REGDUMP) && !defined(CONFIG_WM8994_CLKDEBUG) static #endif uint16_t wm8994_readreg(FAR struct wm8994_dev_s *priv, uint16_t regaddr); static void wm8994_writereg(FAR struct wm8994_dev_s *priv, uint16_t regaddr, uint16_t regval); #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static inline uint16_t wm8994_scalevolume(uint16_t volume, b16_t scale); static void wm8994_setvolume(FAR struct wm8994_dev_s *priv, uint16_t volume, bool mute); #endif #ifndef CONFIG_AUDIO_EXCLUDE_TONE static void wm8994_setbass(FAR struct wm8994_dev_s *priv, uint8_t bass); static void wm8994_settreble(FAR struct wm8994_dev_s *priv, uint8_t treble); #endif static void wm8994_setdatawidth(FAR struct wm8994_dev_s *priv); static void wm8994_setbitrate(FAR struct wm8994_dev_s *priv); static void wm8994_setdatawidth(FAR struct wm8994_dev_s *priv); static void wm8994_setbitrate(FAR struct wm8994_dev_s *priv); /* Audio lower half methods (and close friends) */ static int wm8994_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps); #else static int wm8994_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps); #endif static int wm8994_shutdown(FAR struct audio_lowerhalf_s *dev); static void wm8994_senddone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result); static void wm8994_returnbuffers(FAR struct wm8994_dev_s *priv); static int wm8994_sendbuffer(FAR struct wm8994_dev_s *priv); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_start(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8994_start(FAR struct audio_lowerhalf_s *dev); #endif #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8994_stop(FAR struct audio_lowerhalf_s *dev); #endif #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session); static int wm8994_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8994_pause(FAR struct audio_lowerhalf_s *dev); static int wm8994_resume(FAR struct audio_lowerhalf_s *dev); #endif #endif static int wm8994_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int wm8994_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb); static int wm8994_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg); #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session); #else static int wm8994_reserve(FAR struct audio_lowerhalf_s *dev); #endif #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_release(FAR struct audio_lowerhalf_s *dev, FAR void *session); #else static int wm8994_release(FAR struct audio_lowerhalf_s *dev); #endif /* Interrupt handling an worker thread */ #ifdef WM8994_USE_FFLOCK_INT static void wm8994_interrupt_work(FAR void *arg); static int wm8994_interrupt(FAR const struct wm8994_lower_s *lower, FAR void *arg); #endif static void *wm8994_workerthread(pthread_addr_t pvarg); /* Initialization */ static void wm8994_audio_output(FAR struct wm8994_dev_s *priv); #if 0 /* Not used */ static void wm8994_audio_input(FAR struct wm8994_dev_s *priv); #endif #ifdef WM8994_USE_FFLOCK_INT static void wm8994_configure_ints(FAR struct wm8994_dev_s *priv); #else # define wm8994_configure_ints(p) #endif static void wm8994_hw_reset(FAR struct wm8994_dev_s *priv); /* Private Data */ static const struct audio_ops_s g_audioops = { wm8994_getcaps, /* getcaps */ wm8994_configure, /* configure */ wm8994_shutdown, /* shutdown */ wm8994_start, /* start */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP wm8994_stop, /* stop */ #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME wm8994_pause, /* pause */ wm8994_resume, /* resume */ #endif NULL, /* allocbuffer */ NULL, /* freebuffer */ wm8994_enqueuebuffer, /* enqueue_buffer */ wm8994_cancelbuffer, /* cancel_buffer */ wm8994_ioctl, /* ioctl */ NULL, /* read */ NULL, /* write */ wm8994_reserve, /* reserve */ wm8994_release /* release */ }; /* Private Functions */ /* Name: wm8994_readreg * * Description: * Read the specified 16-bit register from the WM8994 device. * */ #if !defined(CONFIG_WM8994_REGDUMP) && !defined(CONFIG_WM8994_CLKDEBUG) static #endif uint16_t wm8994_readreg(FAR struct wm8994_dev_s *priv, uint16_t regaddr) { int retries; /* Try up to three times to read the register */ for (retries = 1; retries <= MAX_RETRIES; retries++) { struct i2c_msg_s msg[2]; uint8_t data[2]; uint16_t buffer = ((regaddr >> 8) & 0xff) | ((regaddr << 8) & 0xff00); int ret; /* Set up to write the address */ msg[0].frequency = priv->lower->frequency; msg[0].addr = priv->lower->address; msg[0].flags = 0; msg[0].buffer = (FAR uint8_t *)&buffer; msg[0].length = 2; /* Followed by the read data */ msg[1].frequency = priv->lower->frequency; msg[1].addr = priv->lower->address; msg[1].flags = I2C_M_READ; msg[1].buffer = data; msg[1].length = 2; /* Read the register data. The returned value is the number messages * completed. */ ret = I2C_TRANSFER(priv->i2c, msg, 2); if (ret < 0) { #ifdef CONFIG_I2C_RESET /* Perhaps the I2C bus is locked up? Try to shake the bus free. * Don't bother with the reset if this was the last attempt. */ if (retries < MAX_RETRIES) { audwarn("WARNING: I2C_TRANSFER failed: %d ... Resetting\n", ret); ret = I2C_RESET(priv->i2c); if (ret < 0) { auderr("ERROR: I2C_RESET failed: %d\n", ret); break; } } #else auderr("ERROR: I2C_TRANSFER failed: %d\n", ret); #endif } else { uint16_t regval; /* The I2C transfer was successful... break out of the loop and * return the value read. */ regval = ((uint16_t)data[0] << 8) | (uint16_t)data[1]; audinfo("Read: %02x -> %04x\n", regaddr, regval); return regval; } audinfo("retries=%d regaddr=%02x\n", retries, regaddr); } /* No error indication is returned on a failure... just return zero */ return 0; } /* Name: wm8994_writereg * * Description: * Write the specified 16-bit register to the WM8994 device. * */ static void wm8994_writereg(FAR struct wm8994_dev_s *priv, uint16_t regaddr, uint16_t regval) { struct i2c_config_s config; int retries; /* Setup up the I2C configuration */ config.frequency = priv->lower->frequency; config.address = priv->lower->address; config.addrlen = 7; /* Try up to three times to read the register */ for (retries = 1; retries <= MAX_RETRIES; retries++) { uint8_t data[4]; int ret; /* Set up the data to write */ data[0] = regaddr >> 8; data[1] = regaddr & 0xff; data[2] = regval >> 8; data[3] = regval & 0xff; /* Read the register data. The returned value is the number messages * completed. */ ret = i2c_write(priv->i2c, &config, data, 4); if (ret < 0) { #ifdef CONFIG_I2C_RESET /* Perhaps the I2C bus is locked up? Try to shake the bus free. * Don't bother with the reset if this was the last attempt. */ if (retries < MAX_RETRIES) { audwarn("WARNING: i2c_write failed: %d ... Resetting\n", ret); ret = I2C_RESET(priv->i2c); if (ret < 0) { auderr("ERROR: I2C_RESET failed: %d\n", ret); break; } } #else auderr("ERROR: I2C_TRANSFER failed: %d\n", ret); #endif } else { /* The I2C transfer was successful... break out of the loop and * return the value read. */ audinfo("Write: %02x <- %04x\n", regaddr, regval); return; } audinfo("retries=%d regaddr=%02x\n", retries, regaddr); } } /**************************************************************************** * Name: wm8994_setsamplefreq * * Description: * Sets the sample frequency for AIF1 * ****************************************************************************/ static void wm8994_setsamplefreq(FAR struct wm8994_dev_s *priv) { uint16_t regval; /* Table 106 in WM8994 manual */ switch (priv->samprate) { case 8000: regval = WM8994_AIF1_SR_8K; break; case 11025: regval = WM8994_AIF1_SR_11K; break; case 12000: regval = WM8994_AIF1_SR_12K; break; case 16000: regval = WM8994_AIF1_SR_16K; break; case 22050: regval = WM8994_AIF1_SR_22K; break; case 24000: regval = WM8994_AIF1_SR_24K; break; case 32000: regval = WM8994_AIF1_SR_32K; break; case 44100: regval = WM8994_AIF1_SR_44K; break; case 48000: regval = WM8994_AIF1_SR_48K; break; /* If these frequencies should be added, the sample rate * would need to be changed to 32 bit throughout the code */ #if 0 case 88200: regval = WM8994_AIF1_SR_88K; break; case 96000: regval = WM8994_AIF1_SR_96K; break; #endif default: regval = WM8994_AIF1_SR_11K; /* 11025 as default */ } /* AIF1CLK / fs ratio = 256 */ regval |= WM8994_AIF1CLK_RATE_3; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); } /* Name: wm8994_scalevolume * * Description: * Set the right and left volume values in the WM8994 device based * on the current volume and balance settings. * */ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static inline uint16_t wm8994_scalevolume(uint16_t volume, b16_t scale) { return b16toi((b16_t)volume * scale); } #endif /**************************************************************************** * Name: wm8994_setvolume * * Description: * Set the right and left volume values in the WM8994 device based on the * current volume and balance settings. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static void wm8994_setvolume(FAR struct wm8994_dev_s *priv, uint16_t volume, bool mute) { uint32_t leftlevel; uint32_t rightlevel; uint16_t regval; audinfo("volume=%u mute=%u\n", volume, mute); #ifndef CONFIG_AUDIO_EXCLUDE_BALANCE /* Calculate the left channel volume level {0..1000} */ if (priv->balance <= (b16HALF - 1)) { leftlevel = volume; } else if (priv->balance == (b16ONE - 1)) { leftlevel = 0; } else { /* Note: b16ONE - balance goes from 0 to 0.5. * Hence need to multiply volume by 2! */ leftlevel = wm8994_scalevolume(2 * volume, b16ONE - (b16_t)priv->balance); } /* Calculate the right channel volume level {0..1000} */ if (priv->balance >= (b16HALF - 1)) { rightlevel = volume; } else if (priv->balance == 0) { rightlevel = 0; } else { /* Note: b16ONE - balance goes from 0 to 0.5. * Hence need to multiply volume by 2! */ rightlevel = wm8994_scalevolume(2 * volume, (b16_t)priv->balance); } #else leftlevel = priv->volume; rightlevel = priv->volume; #endif /* Set the volume */ regval = WM8994_HPOUT1_VU_ENABLED | WM8994_HPOUT1L_VOL(leftlevel); if (!mute) { regval |= WM8994_HPOUT1L_MUTE_N_NO; } wm8994_writereg(priv, WM8994_LEFT_OUTPUT_VOL, regval); wm8994_writereg(priv, WM8994_SPEAKER_VOL_LEFT, regval); regval = WM8994_HPOUT1_VU_ENABLED | WM8994_HPOUT1R_VOL(rightlevel); if (!mute) { regval |= WM8994_HPOUT1R_MUTE_N_NO; } wm8994_writereg(priv, WM8994_RIGHT_OUTPUT_VOL, regval); wm8994_writereg(priv, WM8994_SPEAKER_VOL_RIGHT, regval); /* Remember the volume level and mute settings */ priv->volume = volume; priv->mute = mute; } #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ /**************************************************************************** * Name: wm8994_setbass * * Description: * Set the bass level. * * The level and range are in whole percentage levels (0-100). * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_TONE static void wm8994_setbass(FAR struct wm8994_dev_s *priv, uint8_t bass) { audinfo("bass=%u\n", bass); #warning Missing logic } #endif /* CONFIG_AUDIO_EXCLUDE_TONE */ /**************************************************************************** * Name: wm8994_settreble * * Description: * Set the treble level . * * The level and range are in whole percentage levels (0-100). * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_TONE static void wm8994_settreble(FAR struct wm8994_dev_s *priv, uint8_t treble) { audinfo("treble=%u\n", treble); #warning Missing logic } #endif /* CONFIG_AUDIO_EXCLUDE_TONE */ /**************************************************************************** * Name: wm8994_setdatawidth * * Description: * Set the 8- or 16-bit data modes * ****************************************************************************/ static void wm8994_setdatawidth(FAR struct wm8994_dev_s *priv) { /* TODO */ } /* Name: wm8994_setbitrate * * Description: * Enter callback function to let the board set * the I2S Frequency appropriately. * * TODO: Currently the FLL is not used as in the current application * the WM8994 will operate in Slave mode. Code snippet * may be helpful to generalize this code to multiple * outputs and other I2S frame formats. */ static void wm8994_setbitrate(FAR struct wm8994_dev_s *priv) { uint32_t fout; unsigned int framelen; DEBUGASSERT(priv && priv->lower); /* First calculate the desired bitrate (fout). This is based on * * 1. The I2S frame length (in bits) * 2. The number of frames per second = nchannels * samplerate * */ framelen = (priv->bpsamp == 8) ? WM8994_FRAMELEN8 : WM8994_FRAMELEN16; fout = (uint32_t)priv->samprate * (uint32_t)priv->nchannels * framelen; audinfo("sample rate=%u nchannels=%u bpsamp=%u framelen=%d fout=%lu\n", priv->samprate, priv->nchannels, priv->bpsamp, framelen, (unsigned long)fout); /* The WM8994 does have an internal FLL * However, for the application here, the STM32 I2S PLL is used * Only way to achieve right clock rate is by setting the * SAI clock accordingly (for STM32F746G Discovery) * * TODO: Generalize. */ wm8994_setsamplefreq(priv); I2S_RXSAMPLERATE(priv->i2s, priv->samprate); } /* Name: wm8994_getcaps * * Description: * Get the audio device capabilities * */ static int wm8994_getcaps(FAR struct audio_lowerhalf_s *dev, int type, FAR struct audio_caps_s *caps) { /* Validate the structure */ DEBUGASSERT(caps && caps->ac_len >= sizeof(struct audio_caps_s)); audinfo("type=%d ac_type=%d\n", type, caps->ac_type); /* Fill in the caller's structure based on requested info */ caps->ac_format.hw = 0; caps->ac_controls.w = 0; switch (caps->ac_type) { /* Caller is querying for the types of units we support */ case AUDIO_TYPE_QUERY: /* Provide our overall capabilities. The interfacing software * must then call us back for specific info for each capability. */ caps->ac_channels = 2; /* Stereo output */ switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* We don't decode any formats! Only something above us in * the audio stream can perform decoding on our behalf. */ /* The types of audio units we implement */ caps->ac_controls.b[0] = AUDIO_TYPE_OUTPUT | AUDIO_TYPE_FEATURE | AUDIO_TYPE_PROCESSING; break; case AUDIO_FMT_MIDI: /* We only support Format 0 */ caps->ac_controls.b[0] = AUDIO_SUBFMT_END; break; default: caps->ac_controls.b[0] = AUDIO_SUBFMT_END; break; } break; /* Provide capabilities of our OUTPUT unit */ case AUDIO_TYPE_OUTPUT: caps->ac_channels = 2; switch (caps->ac_subtype) { case AUDIO_TYPE_QUERY: /* Report the Sample rates we support */ caps->ac_controls.hw[0] = AUDIO_SAMP_RATE_8K | AUDIO_SAMP_RATE_11K | AUDIO_SAMP_RATE_16K | AUDIO_SAMP_RATE_22K | AUDIO_SAMP_RATE_32K | AUDIO_SAMP_RATE_44K | AUDIO_SAMP_RATE_48K; break; case AUDIO_FMT_MP3: case AUDIO_FMT_WMA: case AUDIO_FMT_PCM: break; default: break; } break; /* Provide capabilities of our FEATURE units */ case AUDIO_TYPE_FEATURE: /* If the sub-type is UNDEF, * then report the Feature Units we support */ if (caps->ac_subtype == AUDIO_FU_UNDEF) { /* Fill in the ac_controls section with * the Feature Units we have */ caps->ac_controls.b[0] = AUDIO_FU_VOLUME | AUDIO_FU_BASS | AUDIO_FU_TREBLE; caps->ac_controls.b[1] = AUDIO_FU_BALANCE >> 8; } else { /* TODO: Do we need to provide specific info for the Feature * Units, such as volume setting ranges, etc.? */ } break; /* Provide capabilities of our PROCESSING unit */ case AUDIO_TYPE_PROCESSING: switch (caps->ac_subtype) { case AUDIO_PU_UNDEF: /* Provide the type of Processing Units we support */ caps->ac_controls.b[0] = AUDIO_PU_STEREO_EXTENDER; break; case AUDIO_PU_STEREO_EXTENDER: /* Provide capabilities of our Stereo Extender */ caps->ac_controls.b[0] = AUDIO_STEXT_ENABLE | AUDIO_STEXT_WIDTH; break; default: /* Other types of processing uint we don't support */ break; } break; /* All others we don't support */ default: /* Zero out the fields to indicate no support */ caps->ac_subtype = 0; caps->ac_channels = 0; break; } /* Return the length of the audio_caps_s struct for validation of * proper Audio device type. */ return caps->ac_len; } /* Name: wm8994_configure * * Description: * Configure the audio device for the specified mode of operation. * */ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_configure(FAR struct audio_lowerhalf_s *dev, FAR void *session, FAR const struct audio_caps_s *caps) #else static int wm8994_configure(FAR struct audio_lowerhalf_s *dev, FAR const struct audio_caps_s *caps) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; int ret = OK; DEBUGASSERT(priv != NULL && caps != NULL); audinfo("ac_type: %d\n", caps->ac_type); /* Process the configure operation */ switch (caps->ac_type) { case AUDIO_TYPE_FEATURE: audinfo(" AUDIO_TYPE_FEATURE\n"); /* Process based on Feature Unit */ switch (caps->ac_format.hw) { #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME case AUDIO_FU_VOLUME: { /* Set the volume */ uint16_t volume = caps->ac_controls.hw[0]; audinfo(" Volume: %d\n", volume); if (volume >= 0 && volume <= 1000) { /* Scale the volume setting to the range {0.. 63} */ wm8994_setvolume(priv, (63 * volume / 1000), priv->mute); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ #ifndef CONFIG_AUDIO_EXCLUDE_BALANCE case AUDIO_FU_BALANCE: { /* Set the balance. The percentage level (0-100) is in the * ac_controls.b[0] parameter. */ uint16_t balance = caps->ac_controls.hw[0]; audinfo(" Balance: %d\n", balance); if (balance >= 0 && balance <= 1000) { /* Scale the volume setting to the range {0.. 63} */ priv->balance = (balance * (b16ONE - 1)) / 1000; wm8994_setvolume(priv, priv->volume, priv->mute); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_BALANCE */ #ifndef CONFIG_AUDIO_EXCLUDE_TONE case AUDIO_FU_BASS: { /* Set the bass. The percentage level (0-100) is in the * ac_controls.b[0] parameter. */ uint8_t bass = caps->ac_controls.b[0]; audinfo(" Bass: %d\n", bass); if (bass <= 100) { wm8994_setbass(priv, bass); } else { ret = -EDOM; } } break; case AUDIO_FU_TREBLE: { /* Set the treble. The percentage level (0-100) is in the * ac_controls.b[0] parameter. */ uint8_t treble = caps->ac_controls.b[0]; audinfo(" Treble: %d\n", treble); if (treble <= 100) { wm8994_settreble(priv, treble); } else { ret = -EDOM; } } break; #endif /* CONFIG_AUDIO_EXCLUDE_TONE */ default: auderr(" ERROR: Unrecognized feature unit\n"); ret = -ENOTTY; break; } break; case AUDIO_TYPE_OUTPUT: { audinfo(" AUDIO_TYPE_OUTPUT:\n"); audinfo(" Number of channels: %u\n", caps->ac_channels); audinfo(" Sample rate: %u\n", caps->ac_controls.hw[0]); audinfo(" Sample width: %u\n", caps->ac_controls.b[2]); /* Verify that all of the requested values are supported */ ret = -ERANGE; if (caps->ac_channels != 1 && caps->ac_channels != 2) { auderr("ERROR: Unsupported number of channels: %d\n", caps->ac_channels); break; } if (caps->ac_controls.b[2] != 8 && caps->ac_controls.b[2] != 16) { auderr("ERROR: Unsupported bits per sample: %d\n", caps->ac_controls.b[2]); break; } /* Save the current stream configuration */ priv->samprate = caps->ac_controls.hw[0]; priv->nchannels = caps->ac_channels; priv->bpsamp = caps->ac_controls.b[2]; /* Reconfigure the FLL to support the resulting number or channels, * bits per sample, and bitrate. */ wm8994_setdatawidth(priv); wm8994_setbitrate(priv); wm8994_clock_analysis(&priv->dev, "AUDIO_TYPE_OUTPUT"); ret = OK; } break; case AUDIO_TYPE_PROCESSING: break; } return ret; } /* Name: wm8994_shutdown * * Description: * Shutdown the WM8994 chip and put it in the lowest power state possible. * */ static int wm8994_shutdown(FAR struct audio_lowerhalf_s *dev) { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; DEBUGASSERT(priv); /* First disable interrupts */ WM8994_DISABLE(priv->lower); /* Now issue a software reset. This puts all WM8994 registers back in * their default state. */ wm8994_hw_reset(priv); return OK; } /* Name: wm8994_senddone * * Description: * This is the I2S callback function that is invoked when the transfer * completes. * */ static void wm8994_senddone(FAR struct i2s_dev_s *i2s, FAR struct ap_buffer_s *apb, FAR void *arg, int result) { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)arg; struct audio_msg_s msg; irqstate_t flags; int ret; DEBUGASSERT(i2s && priv && priv->running && apb); audinfo("apb=%p inflight=%d result=%d\n", apb, priv->inflight, result); /* We do not place any restriction on the context in which this function * is called. It may be called from an interrupt handler. Therefore, the * doneq and in-flight values might be accessed from the interrupt level. * Not the best design. But we will use interrupt controls to protect * against that possibility. */ flags = enter_critical_section(); /* Add the completed buffer to the end of our doneq. We do not yet * decrement the reference count. */ dq_addlast((FAR dq_entry_t *)apb, &priv->doneq); /* And decrement the number of buffers in-flight */ DEBUGASSERT(priv->inflight > 0); priv->inflight--; /* Save the result of the transfer */ /* REVISIT: This can be overwritten */ priv->result = result; leave_critical_section(flags); /* Now send a message to the worker thread, informing it that there are * buffers in the done queue that need to be cleaned up. */ msg.msg_id = AUDIO_MSG_COMPLETE; ret = file_mq_send(&priv->mq, (FAR const char *)&msg, sizeof(msg), CONFIG_WM8994_MSG_PRIO); if (ret < 0) { auderr("ERROR: file_mq_send failed: %d\n", ret); } } /* Name: wm8994_returnbuffers * * Description: * This function is called after the complete of one or more data * transfers. This function will empty the done queue and release our * reference to each buffer. * */ static void wm8994_returnbuffers(FAR struct wm8994_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; /* The doneq and in-flight values might be accessed from the interrupt * level in some implementations. Not the best design. But we will * use interrupt controls to protect against that possibility. */ flags = enter_critical_section(); while (dq_peek(&priv->doneq) != NULL) { /* Take the next buffer from the queue of completed transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->doneq); leave_critical_section(flags); audinfo("Returning: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); /* Are we returning the final buffer in the stream? */ if ((apb->flags & AUDIO_APB_FINAL) != 0) { /* Both the pending and the done queues should be empty and there * should be no buffers in-flight. */ DEBUGASSERT(dq_empty(&priv->doneq) && dq_empty(&priv->pendq) && priv->inflight == 0); /* Set the terminating flag. This will, eventually, cause the * worker thread to exit (if it is not already terminating). */ audinfo("Terminating\n"); priv->terminating = true; } /* Release our reference to the audio buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif flags = enter_critical_section(); } leave_critical_section(flags); } /* Name: wm8994_sendbuffer * * Description: * Start the transfer an audio buffer to the WM8994 via I2S. This * will not wait for the transfer to complete but will return immediately. * the wmd8994_senddone called will be invoked when the transfer * completes, stimulating the worker thread to call this function again. * */ static int wm8994_sendbuffer(FAR struct wm8994_dev_s *priv) { FAR struct ap_buffer_s *apb; irqstate_t flags; uint32_t timeout; int shift; int ret = OK; /* Loop while there are audio buffers to be sent and we have few than * CONFIG_WM8994_INFLIGHT then "in-flight" * * The 'inflight' value might be modified from the interrupt level in some * implementations. We will use interrupt controls to protect against * that possibility. * * The 'pendq', on the other hand, is protected via a semaphore. Let's * hold the semaphore while we are busy here and disable the interrupts * only while accessing 'inflight'. */ ret = nxmutex_lock(&priv->pendlock); if (ret < 0) { return ret; } while (priv->inflight < CONFIG_WM8994_INFLIGHT && dq_peek(&priv->pendq) != NULL && !priv->paused) { /* Take next buffer from the queue of pending transfers */ apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq); audinfo("Sending apb=%p, size=%d inflight=%d\n", apb, apb->nbytes, priv->inflight); /* Increment the number of buffers in-flight before sending in order * to avoid a possible race condition. */ flags = enter_critical_section(); priv->inflight++; leave_critical_section(flags); /* Send the entire audio buffer via I2S. What is a reasonable timeout * to use? This would depend on the bit rate and size of the buffer. * * Samples in the buffer (samples): * = buffer_size * 8 / bpsamp samples * Sample rate (samples/second): * = samplerate * nchannels * Expected transfer time (seconds): * = (buffer_size * 8) / bpsamp / samplerate / nchannels * * We will set the timeout about twice that. * * NOTES: * - The multiplier of 8 becomes 16000 for 2x and units of * milliseconds. * - 16000 is a approximately 16384 (1 << 14), bpsamp is either * (1 << 3) or (1 << 4), and nchannels is either (1 << 0) or * (1 << 1). So this can be simplifies to (milliseconds): * * = (buffer_size << shift) / samplerate */ shift = (priv->bpsamp == 8) ? 14 - 3 : 14 - 4; shift -= (priv->nchannels > 1) ? 1 : 0; timeout = MSEC2TICK(((uint32_t)(apb->nbytes - apb->curbyte) << shift) / (uint32_t)priv->samprate); ret = I2S_SEND(priv->i2s, apb, wm8994_senddone, priv, timeout); if (ret < 0) { auderr("ERROR: I2S_SEND failed: %d\n", ret); break; } } nxmutex_unlock(&priv->pendlock); return ret; } /* Name: wm8994_start * * Description: * Start the configured operation (audio streaming, volume enabled, etc.). * */ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_start(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8994_start(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; struct sched_param sparam; struct mq_attr attr; pthread_attr_t tattr; FAR void *value; int ret; audinfo("Entry\n"); /* Exit reduced power modes of operation */ /* REVISIT */ /* Create a message queue for the worker thread */ snprintf(priv->mqname, sizeof(priv->mqname), "/tmp/%p", priv); attr.mq_maxmsg = 16; attr.mq_msgsize = sizeof(struct audio_msg_s); attr.mq_curmsgs = 0; attr.mq_flags = 0; ret = file_mq_open(&priv->mq, priv->mqname, O_RDWR | O_CREAT, 0644, &attr); if (ret < 0) { /* Error creating message queue! */ auderr("ERROR: Couldn't allocate message queue\n"); return ret; } /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { audinfo("Joining old thread\n"); pthread_join(priv->threadid, &value); } /* Start our thread for sending data to the device */ pthread_attr_init(&tattr); sparam.sched_priority = sched_get_priority_max(SCHED_FIFO) - 3; pthread_attr_setschedparam(&tattr, &sparam); pthread_attr_setstacksize(&tattr, CONFIG_WM8994_WORKER_STACKSIZE); audinfo("Starting worker thread\n"); ret = pthread_create(&priv->threadid, &tattr, wm8994_workerthread, (pthread_addr_t)priv); if (ret != OK) { auderr("ERROR: pthread_create failed: %d\n", ret); } else { pthread_setname_np(priv->threadid, "wm8994"); audinfo("Created worker thread\n"); } return ret; } /* Name: wm8994_stop * * Description: Stop the configured operation (audio streaming, volume * disabled, etc.). * */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_stop(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8994_stop(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; struct audio_msg_s term_msg; FAR void *value; /* Send a message to stop all audio streaming */ term_msg.msg_id = AUDIO_MSG_STOP; term_msg.u.data = 0; file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_WM8994_MSG_PRIO); /* Join the worker thread */ pthread_join(priv->threadid, &value); priv->threadid = 0; /* Enter into a reduced power usage mode */ /* REVISIT: */ return OK; } #endif /* Name: wm8994_pause * * Description: Pauses the playback. * */ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_pause(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8994_pause(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; if (priv->running && !priv->paused) { /* Disable interrupts to prevent us from suppling any more data */ priv->paused = true; WM8994_DISABLE(priv->lower); } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /* Name: wm8994_resume * * Description: Resumes the playback. * */ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_resume(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8994_resume(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; if (priv->running && priv->paused) { priv->paused = false; /* Enable interrupts to allow sampling data */ wm8994_sendbuffer(priv); #ifdef WM8994_USE_FFLOCK_INT WM8994_ENABLE(priv->lower); #endif } return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /* Name: wm8994_enqueuebuffer * * Description: Enqueue an Audio Pipeline Buffer for playback/ processing. * */ static int wm8994_enqueuebuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; struct audio_msg_s term_msg; int ret; audinfo("Enqueueing: apb=%p curbyte=%d nbytes=%d flags=%04x\n", apb, apb->curbyte, apb->nbytes, apb->flags); /* Take a reference on the new audio buffer */ apb_reference(apb); /* Add the new buffer to the tail of pending audio buffers */ ret = nxmutex_lock(&priv->pendlock); if (ret < 0) { return ret; } apb->flags |= AUDIO_APB_OUTPUT_ENQUEUED; dq_addlast(&apb->dq_entry, &priv->pendq); nxmutex_unlock(&priv->pendlock); /* Send a message to the worker thread indicating that a new buffer has * been enqueued. If mq is NULL, then the playing has not yet started. * In that case we are just "priming the pump" and we don't need to send * any message. */ ret = OK; if (priv->mq.f_inode != NULL) { term_msg.msg_id = AUDIO_MSG_ENQUEUE; term_msg.u.data = 0; ret = file_mq_send(&priv->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_WM8994_MSG_PRIO); if (ret < 0) { auderr("ERROR: file_mq_send failed: %d\n", ret); } } return ret; } /* Name: wm8994_cancelbuffer * * Description: Called when an enqueued buffer is being cancelled. * */ static int wm8994_cancelbuffer(FAR struct audio_lowerhalf_s *dev, FAR struct ap_buffer_s *apb) { audinfo("apb=%p\n", apb); return OK; } /* Name: wm8994_ioctl * * Description: Perform a device ioctl * */ static int wm8994_ioctl(FAR struct audio_lowerhalf_s *dev, int cmd, unsigned long arg) { int ret = OK; #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS FAR struct ap_buffer_info_s *bufinfo; #endif /* Deal with ioctls passed from the upper-half driver */ switch (cmd) { /* Check for AUDIOIOC_HWRESET ioctl. This ioctl is passed straight * through from the upper-half audio driver. */ case AUDIOIOC_HWRESET: { /* REVISIT: Should we completely re-initialize the chip? We * can't just issue a software reset; that would puts all WM8994 * registers back in their default state. */ audinfo("AUDIOIOC_HWRESET:\n"); } break; /* Report our preferred buffer size and quantity */ #ifdef CONFIG_AUDIO_DRIVER_SPECIFIC_BUFFERS case AUDIOIOC_GETBUFFERINFO: { audinfo("AUDIOIOC_GETBUFFERINFO:\n"); bufinfo = (FAR struct ap_buffer_info_s *) arg; bufinfo->buffer_size = CONFIG_WM8994_BUFFER_SIZE; bufinfo->nbuffers = CONFIG_WM8994_NUM_BUFFERS; } break; #endif default: ret = -ENOTTY; audinfo("Ignored\n"); break; } return ret; } /* Name: wm8994_reserve * * Description: Reserves a session (the only one we have). * */ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_reserve(FAR struct audio_lowerhalf_s *dev, FAR void **session) #else static int wm8994_reserve(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *) dev; int ret = OK; /* Borrow the APBQ mutex for thread sync */ nxmutex_lock(&priv->pendlock); if (priv->reserved) { ret = -EBUSY; } else { /* Initialize the session context */ #ifdef CONFIG_AUDIO_MULTI_SESSION *session = NULL; #endif priv->inflight = 0; priv->running = false; priv->paused = false; #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif priv->reserved = true; } nxmutex_unlock(&priv->pendlock); return ret; } /* Name: wm8994_release * * Description: Releases the session (the only one we have). * */ #ifdef CONFIG_AUDIO_MULTI_SESSION static int wm8994_release(FAR struct audio_lowerhalf_s *dev, FAR void *session) #else static int wm8994_release(FAR struct audio_lowerhalf_s *dev) #endif { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)dev; void *value; /* Join any old worker thread we had created to prevent a memory leak */ if (priv->threadid != 0) { pthread_join(priv->threadid, &value); priv->threadid = 0; } /* Borrow the APBQ mutex for thread sync */ nxmutex_lock(&priv->pendlock); /* Really we should free any queued buffers here */ priv->reserved = false; nxmutex_unlock(&priv->pendlock); return OK; } /* Name: wm8994_interrupt_work * * Description: * WM8994 interrupt actions cannot be performed in the interrupt handler * because I2C access is not possible in that context. Instead, all I2C * operations are deferred to the work queue. * * Assumptions: * WM8994 interrupts were disabled in the interrupt handler. * */ #ifdef WM8994_USE_FFLOCK_INT static void wm8994_interrupt_work(FAR void *arg) { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)arg; uint16_t regval; DEBUGASSERT(priv && priv->lower); /* Sample the interrupt status */ /* regval = wm8994_readreg(priv, WM8994_INT_STATUS); */ audinfo("INT_STATUS: %04x\n", regval); /* Check for the FLL lock interrupt. We are sloppy here since at * present, only the FLL lock interrupt is used. */ DEBUGASSERT((regval & WM8994_FLL_LOCK_INT) != 0 && !priv->locked); UNUSED(regval); priv->locked = true; /* Clear all pending interrupts by write 1's to the interrupt status * register. * * REVISIT: Since I2C is slow and not atomic with respect to WM8994 event, * could this not cause the lost of interrupts? */ /* wm8994_writereg(priv, WM8994_INT_STATUS, WM8994_ALL_INTS); */ /* Disable further FLL lock interrupts. We are sloppy here since at * present, only the FLL lock interrupt is used. */ /* wm8994_writereg(priv, WM8994_INT_MASK, WM8994_ALL_INTS); */ #ifdef WM8994_USE_FFLOCK_INT /* Re-enable WM8994 interrupts */ WM8994_ENABLE(priv->lower); #endif } #endif /* Name: wm8994_interrupt * * Description: * This is the ISR that services the GPIO1/IRQ pin from the WM8994. It * signals WM8994 events such FLL lock. * */ #ifdef WM8994_USE_FFLOCK_INT static int wm8994_interrupt(FAR const struct wm8994_lower_s *lower, FAR void *arg) { FAR struct wm8994_dev_s *priv = (FAR struct wm8994_dev_s *)arg; int ret; DEBUGASSERT(lower && priv); /* Disable further interrupts and perform all interrupt related activities * on the work thread. There is nothing that we can do from the interrupt * handler because we cannot perform I2C operations here. */ WM8994_DISABLE(priv->lower); DEBUGASSERT(work_available(&priv->work)); ret = work_queue(LPWORK, &priv->work, wm8994_interrupt_work, priv, 0); if (ret < 0) { auderr("ERROR: Failed to schedule work\n"); } return OK; } #endif /* Name: wm8994_workerthread * * This is the thread that feeds data to the chip and keeps the audio * stream going. * */ static void *wm8994_workerthread(pthread_addr_t pvarg) { FAR struct wm8994_dev_s *priv = (struct wm8994_dev_s *) pvarg; struct audio_msg_s msg; FAR struct ap_buffer_s *apb; int msglen; unsigned int prio; audinfo("Entry\n"); #ifndef CONFIG_AUDIO_EXCLUDE_STOP priv->terminating = false; #endif /* Mark ourself as running and make sure that WM8994 interrupts are * enabled. */ priv->running = true; #ifdef WM8994_USE_FFLOCK_INT WM8994_ENABLE(priv->lower); #endif wm8994_setvolume(priv, priv->volume, false); /* Loop as long as we are supposed to be running and as long as we have * buffers in-flight. */ while (priv->running || priv->inflight > 0) { /* Check if we have been asked to terminate. e have to check if we * still have buffers in-flight. If we do, then we can't stop until * birds come back to roost. */ if (priv->terminating && priv->inflight <= 0) { /* We are IDLE. Break out of the loop and exit. */ break; } else { /* Check if we can send more audio buffers to the WM8994 */ wm8994_sendbuffer(priv); } /* Wait for messages from our message queue */ msglen = file_mq_receive(&priv->mq, (FAR char *)&msg, sizeof(msg), &prio); /* Handle the case when we return with no message */ if (msglen < sizeof(struct audio_msg_s)) { auderr("ERROR: Message too small: %d\n", msglen); continue; } /* Process the message */ switch (msg.msg_id) { /* The ISR has requested more data. We will catch this case at * the top of the loop. */ case AUDIO_MSG_DATA_REQUEST: audinfo("AUDIO_MSG_DATA_REQUEST\n"); break; /* Stop the playback */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP case AUDIO_MSG_STOP: /* Indicate that we are terminating */ audinfo("AUDIO_MSG_STOP: Terminating\n"); priv->terminating = true; break; #endif /* We have a new buffer to send. We will catch this case at * the top of the loop. */ case AUDIO_MSG_ENQUEUE: audinfo("AUDIO_MSG_ENQUEUE\n"); break; /* We will wake up from the I2S callback with this message */ case AUDIO_MSG_COMPLETE: audinfo("AUDIO_MSG_COMPLETE\n"); wm8994_returnbuffers(priv); break; default: auderr("ERROR: Ignoring message ID %d\n", msg.msg_id); break; } } /* Reset the WM8994 hardware */ wm8994_hw_reset(priv); /* Return any pending buffers in our pending queue */ nxmutex_lock(&priv->pendlock); while ((apb = (FAR struct ap_buffer_s *)dq_remfirst(&priv->pendq)) != NULL) { /* Release our reference to the buffer */ apb_free(apb); /* Send the buffer back up to the previous level. */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_DEQUEUE, apb, OK); #endif } nxmutex_unlock(&priv->pendlock); /* Return any pending buffers in our done queue */ wm8994_returnbuffers(priv); /* Close the message queue */ file_mq_close(&priv->mq); file_mq_unlink(priv->mqname); /* Send an AUDIO_MSG_COMPLETE message to the client */ #ifdef CONFIG_AUDIO_MULTI_SESSION priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK, NULL); #else priv->dev.upper(priv->dev.priv, AUDIO_CALLBACK_COMPLETE, NULL, OK); #endif audinfo("Exit\n"); return NULL; } /* Name: wm8994_audio_output * * Description: * Initialize and configure the WM8994 device as an audio output device. * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None. No failures are detected. * */ static void wm8994_audio_output(FAR struct wm8994_dev_s *priv) { uint16_t regval; uint16_t cold_startup = 1; /* Do not change! Currently only headphones are supported! */ uint16_t hp_out = 1; uint16_t spk_out = 0; /* Bias Control. */ regval = WM8994_STARTUP_BIAS_ENA | WM8994_VMID_BUF_ENA | WM8994_VMID_RAMP_SOFT_FAST_START; wm8994_writereg(priv, WM8994_ANTI_POP2, regval); /* VMID Control */ regval = WM8994_BIAS_ENA | WM8994_VMID_SEL_2X40K; wm8994_writereg(priv, WM8994_PM1, regval); up_mdelay(40); /* Path configuration for output * * Currently the DAC1 is used and configured for AIF1 Timeslot 0 * DAC2 and AIF1 Timeslot 1 remain unused */ /* Enable DAC1 (Left), Enable DAC1 (Right) * Enable AIF1DAC1L (Left) input path (AIF1, TS0) * Enable AIF1DAC1R (Right) input path (AIF1, TS0) */ regval = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA | WM8994_DAC1L_ENA | WM8994_DAC1R_ENA; wm8994_writereg(priv, WM8994_PM5, regval); /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */ regval = WM8994_AIF1DAC1L_TO_DAC1L_ENA; wm8994_writereg(priv, WM8994_DAC1_LEFT_MIXER_ROUTING, regval); /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */ regval = WM8994_AIF1DAC1R_TO_DAC1R_ENA; wm8994_writereg(priv, WM8994_DAC1_RIGHT_MIXER_ROUTING, regval); /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */ regval = 0x0000; wm8994_writereg(priv, WM8994_DAC2_LEFT_MIXER_ROUTING, regval); /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */ regval = 0x0000; wm8994_writereg(priv, WM8994_DAC2_RIGHT_MIXER_ROUTING, regval); /* Clock Rates 1. * * Contains settings the control the sample rate. * * Note: * The AIF clock is directly related to the MCLK signal * which is set to fs*256. * As long as DAC_OSR128 is left off, according to * Table 48, a constant AIFnCLK / Fs ratio of * 256 works from 8kHz to 48kHz. */ wm8994_setbitrate(priv); /* AIF1 Word Length = 16-bits, AIF1 Format = I2S (Default Register Value) */ regval = WM8994_AIF1ADCR_SRC | WM8994_AIF1_FMT_I2S; wm8994_writereg(priv, WM8994_AIF1_CTL1, regval); /* Slave mode */ regval = 0x0000; wm8994_writereg(priv, WM8994_AIF1_MASTER_SLAVE, regval); /* Enable the DSP processing clock for AIF1, Enable the core clock */ regval = WM8994_SYSDSPCLK_ENA | WM8994_AIF1DSPCLK_ENA; wm8994_writereg(priv, WM8994_CLK1, regval); /* Enable AIF1 Clock, AIF1 Clock Source = MCLK1 pin */ regval = WM8994_AIF1CLK_ENA; wm8994_writereg(priv, WM8994_AIF1_CLK1, regval); /* Select DAC1 (Left) to Left Headphone Output */ regval = WM8994_DAC1L_TO_HPOUT1L; wm8994_writereg(priv, WM8994_OUTPUT_MIXER1, regval); /* Select DAC1 (Right) to Right Headphone Output */ regval = WM8994_DAC1R_TO_HPOUT1R; wm8994_writereg(priv, WM8994_OUTPUT_MIXER2, regval); /* Startup sequence for Headphone */ if (cold_startup) { regval = WM8994_WSEQ_ENA | WM8994_WSEQ_START | (0x0 << WM8994_WSEQ_START_INDEX_SHIFT); /* Start Index = 0 */ wm8994_writereg(priv, WM8994_WR_CTL_SEQ1, regval); up_mdelay(20); /* Wait until sequencer indicates that sequence is completed */ regval = wm8994_readreg(priv, WM8994_WR_CTL_SEQ2); while (regval & WM8994_WSEQ_BUSY) { regval = wm8994_readreg(priv, WM8994_WR_CTL_SEQ2); up_mdelay(20); } /* TODO: Manage cold/warm start correctly */ cold_startup = 0; } else /* Headphone Warm Start-Up */ { regval = WM8994_WSEQ_ENA | WM8994_WSEQ_START | (0x8 << WM8994_WSEQ_START_INDEX_SHIFT); /* Start Index = 8 */ wm8994_writereg(priv, WM8994_WR_CTL_SEQ1, regval); up_mdelay(20); /* Wait until sequencer indicates that sequence is completed */ regval = wm8994_readreg(priv, WM8994_WR_CTL_SEQ2); while (regval & WM8994_WSEQ_BUSY) { regval = wm8994_readreg(priv, WM8994_WR_CTL_SEQ2); up_mdelay(20); } } /* Soft un-Mute the AIF1 Timeslot 0 DAC1 path L&R */ regval = 0x0000; wm8994_writereg(priv, WM8994_AIF1_DAC1_FILTERS1, regval); /* Enable SPKRVOL PGA, Enable SPKMIXR, Enable SPKLVOL PGA, Enable SPKMIXL */ regval = WM8994_SPKRVOL_ENA | WM8994_SPKLVOL_ENA; wm8994_writereg(priv, WM8994_PM3, regval); /* Left Speaker Mixer Volume = 0dB */ regval = 0x0000; wm8994_writereg(priv, WM8994_SPKMIXL_ATT, regval); /* Speaker output mode = Class D, * Right Speaker Mixer Volume = 0dB */ regval = 0x0000; wm8994_writereg(priv, WM8994_SPKMIXR_ATT, regval); if (spk_out) { /* Unmute DAC2 (Left) to Left Speaker Mixer (SPKMIXL) path, * Unmute DAC2 (Right) to Right Speaker Mixer (SPKMIXR) path */ regval = WM8994_DAC2L_TO_SPKMIXL | WM8994_DAC2R_TO_SPKMIXR; wm8994_writereg(priv, WM8994_SPEAKER_MIXER, regval); /* Enable bias generator, Enable VMID, Enable SPKOUTL, Enable SPKOUTR */ regval = WM8994_SPKOUTR_ENA | WM8994_SPKOUTL_ENA | WM8994_BIAS_ENA | WM8994_VMID_SEL_2X40K; wm8994_writereg(priv, WM8994_PM1, regval); /* Enable Class W, Class W Envelope Tracking = AIF1 Timeslot 0 */ regval = wm8994_readreg(priv, WM8994_CLASS_W_1); regval |= WM8994_CP_DYN_PWR; wm8994_writereg(priv, WM8994_CLASS_W_1, regval); } /* Enable normal bias generator, Enable VMID */ regval = WM8994_BIAS_ENA | WM8994_VMID_SEL_2X40K; /* Enable speaker */ if (spk_out) { regval |= WM8994_SPKOUTR_ENA | WM8994_SPKOUTL_ENA; } /* Enable HPOUT1 (Left) and * Enable HPOUT1 (Right) input stages */ if (hp_out) { regval |= WM8994_HPOUT1L_ENA | WM8994_HPOUT1R_ENA; } wm8994_writereg(priv, WM8994_PM1, regval); /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate stages */ regval = WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY; wm8994_writereg(priv, WM8994_ANA_HP1, regval); /* Enable Charge Pump * Note: The STM32Cube_FW_F7_V1.16.0 BSP driver included the * number 9F25h as write value for this register. This is the * default value + CP_ENA set. */ regval = wm8994_readreg(priv, WM8994_CHARGE_PUMP1); regval |= WM8994_CP_ENA; wm8994_writereg(priv, WM8994_CHARGE_PUMP1, regval); /* Add Delay */ up_mdelay(15); /* Select DAC1 (Left) to Left Headphone Output PGA (HPOUT1LVOL) path */ regval = WM8994_DAC1L_TO_MIXOUTL; wm8994_writereg(priv, WM8994_OUTPUT_MIXER1, regval); /* Select DAC1 (Right) to Right Headphone Output PGA (HPOUT1RVOL) path */ regval = WM8994_DAC1R_TO_MIXOUTR; wm8994_writereg(priv, WM8994_OUTPUT_MIXER2, regval); /* Enable Left Output Mixer (MIXOUTL), * Enable Right Output Mixer (MIXOUTR), * Enable SPKOUTL and SPKOUTR */ regval = WM8994_MIXOUTL_ENA | WM8994_MIXOUTR_ENA; if (spk_out) { regval |= WM8994_SPKLVOL_ENA | WM8994_SPKRVOL_ENA; } wm8994_writereg(priv, WM8994_PM3, regval); /* Enable DC Servo and trigger start-up mode on left and right channels */ regval = WM8994_DCS_TRIG_STARTUP_1 | WM8994_DCS_TRIG_STARTUP_0 | WM8994_DCS_ENA_CHAN_1 | WM8994_DCS_ENA_CHAN_0; wm8994_writereg(priv, WM8994_DC_SERVO1, regval); /* Add Delay */ up_mdelay(257); /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate and output stages. * Remove clamps */ regval = WM8994_HPOUT1L_RMV_SHORT | WM8994_HPOUT1L_OUTP | WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_RMV_SHORT | WM8994_HPOUT1R_OUTP | WM8994_HPOUT1R_DLY; wm8994_writereg(priv, WM8994_ANA_HP1, regval); /* Set DAC 1 (Left) to volume 0xC0 */ if (hp_out) { regval = (0xc0 << WM8994_DAC1L_VOL_SHIFT); wm8994_writereg(priv, WM8994_DAC1_LEFT_VOL, regval); /* Set DAC 1 (Right) to volume 0xC0 */ regval = (0xc0 << WM8994_DAC1R_VOL_SHIFT); wm8994_writereg(priv, WM8994_DAC1_RIGHT_VOL, regval); /* Unmute the AIF1 Timeslot 0 DAC path */ regval = WM8994_AIF1DAC1_UNMUTE_RAMP; wm8994_writereg(priv, WM8994_AIF1_DAC1_FILTERS1, regval); } if (spk_out) { /* Set DAC 2 (Left) to volume 0xC0 */ regval = (0xc0 << WM8994_DAC2L_VOL_SHIFT); wm8994_writereg(priv, WM8994_DAC2_LEFT_VOL, regval); /* Set DAC 2 (Right) to volume 0xC0 */ regval = (0xc0 << WM8994_DAC2R_VOL_SHIFT); wm8994_writereg(priv, WM8994_DAC2_RIGHT_VOL, regval); /* Unmute the AIF1 Timeslot 1 DAC2 path */ regval = WM8994_AIF1DAC2_UNMUTE_RAMP; wm8994_writereg(priv, WM8994_AIF1_DAC2_FILTERS1, regval); } /* Volume Control */ wm8994_setvolume(priv, CONFIG_WM8994_INITVOLUME, true); } /* Name: wm8994_audio_input * * Description: * Initialize and configure the WM8994 device as an audio output device * (Right input only). wm8994_audio_output() must be called first, this * function then modifies the configuration to support audio input. * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None. No failures are detected. * */ #if 0 /* Not used */ static void wm8994_audio_input(FAR struct wm8994_dev_s *priv) { /* Analogue Left Input 0 */ wm8994_writereg(priv, WM8994_ANA_LEFT_IN0, WM8994_INMUTE); /* Analogue Right Input 0 */ wm8994_writereg(priv, WM8994_ANA_RIGHT_IN0, WM8994_IN_VOL(5)); /* Analogue Left Input 1 */ wm8994_writereg(priv, WM8994_ANA_LEFT_IN1, 0); /* Analogue Right Input 1 */ wm8994_writereg(priv, WM8994_ANA_RIGHT_IN1, WM8994_IP_SEL_N_IN2L); } #endif /* Name: wm8994_configure_ints * * Description: * Configure the GPIO/IRQ interrupt * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None * */ #ifdef WM8994_USE_FFLOCK_INT static void wm8994_configure_ints(FAR struct wm8994_dev_s *priv) { uint16_t regval; /* Configure GPIO1 as an IRQ * * WM8994_GPIO1_PU=0 : No pull-up * WM8994_GPIO1_PD=1 : Pulled-down * WM8994_GPIO1_SEL_IRQ : Configured as IRQ */ /* Attach our handler to the GPIO1/IRQ interrupt */ WM8994_ATTACH(lower, wm8994_interrupt, priv); /* Configure interrupts. wm8994_setbitrate() depends on FLL interrupts. */ } #endif /* Name: wm8994_hw_reset * * Description: * Reset and re-initialize the WM8994 * * Input Parameters: * priv - A reference to the driver state structure * * Returned Value: * None * */ static void wm8994_hw_reset(FAR struct wm8994_dev_s *priv) { /* Put audio output back to its initial configuration */ priv->samprate = WM8994_DEFAULT_SAMPRATE; priv->nchannels = WM8994_DEFAULT_NCHANNELS; priv->bpsamp = WM8994_DEFAULT_BPSAMP; #if !defined(CONFIG_AUDIO_EXCLUDE_VOLUME) && !defined(CONFIG_AUDIO_EXCLUDE_BALANCE) priv->balance = b16HALF - 1; /* Center balance */ #endif /* Software reset. This puts all WM8994 registers back in their * default state. */ /* 0x0000 = 0 */ wm8994_writereg(priv, WM8994_SWRST, 0); /* wm8994 Errata Work-Arounds */ /* Note: Initially from STM32Cube_FW_F7_V1.15.0. * The write to 0x56 comes from Linux (drivers/mfd/wm8994-core.c), * where it is found for wm8994_revc_patch. Neither * register 0x56 nor 0x817 is documented. */ wm8994_writereg(priv, 0x102, 0x0003); wm8994_writereg(priv, 0x56, 0x0003); wm8994_writereg(priv, 0x817, 0x0000); wm8994_writereg(priv, 0x102, 0x0000); /* TODO: This code was left in here as reference for * enabling input functionality and multiple outputs * Currently not used */ #if 0 /* regval=0x006c */ regval = WM8994_VMID_RAMP_SOFT_FAST_START | WM8994_VMID_BUF_ENA | WM8994_STARTUP_BIAS_ENA; /* 0x39 = 0x006c */ wm8994_writereg(priv, WM8994_ANTI_POP2, regval); if (WM8994_DEFAULT_INPUT_DEVICE > 0) regval = 0x0013; else regval = 0x0003; /* 0x01 = 0x0013 */ wm8994_writereg(priv, WM8994_PM1, regval); up_mdelay(50); /* Configure the WM8994 hardware as an audio output device */ wm8994_audio_output(priv); { switch (WM8994_DEFAULT_OUTPUT_DEVICE) { case WM8994_OUTPUT_DEVICE_SPEAKER: /* regval = 0x0c0c */ /* regval = WM8994_AIF1_DAC2L_ENA | WM8994_AIF1_DAC2R_ENA * | WM8994_DAC2L_ENA | WM8994_DAC2R_ENA; */ regval = 0x0c0c; wm8994_writereg(priv, WM8994_PM5, regval); /* 0x05 */ /* regval = 0x0000 */ regval = 0; /* 0x601 = 0x0000 */ wm8994_writereg(priv, WM8994_DAC1_LEFT_MIXER_ROUTING, regval); regval = 0; /* regval = 0x0000 */ /* 0x602 = 0x0000 */ wm8994_writereg(priv, WM8994_DAC1_RIGHT_MIXER_ROUTING, regval); regval = WM8994_AIF1DAC2L_TO_DAC2L_ENA; /* regval = 0x0002 */ /* 0x604=0x0002 */ wm8994_writereg(priv, WM8994_DAC2_LEFT_MIXER_ROUTING, regval); regval = WM8994_AIF1DAC2R_TO_DAC2R_ENA; /* regval = 0x0002 */ /* 0x605=0x0002 */ wm8994_writereg(priv, WM8994_DAC2_RIGHT_MIXER_ROUTING, regval); break; case WM8994_OUTPUT_DEVICE_HEADPHONE: /* regval = WM8994_AIF1_DAC1L_ENA | WM8994_AIF1_DAC1R_ENA * | WM8994_DAC1L_ENA | WM8994_DAC1R_ENA; */ regval = 0x0303; wm8994_writereg(priv, WM8994_PM5, regval); /* 0x05 = 0x0303 */ regval = WM8994_AIF1DAC1L_TO_DAC1L_ENA; wm8994_writereg(priv, WM8994_DAC1_LEFT_MIXER_ROUTING, regval); /* 0x601=0x0001 */ regval = WM8994_AIF1DAC1R_TO_DAC1R_ENA; wm8994_writereg(priv, WM8994_DAC1_RIGHT_MIXER_ROUTING, regval); /* 0x602=0x0001 */ regval = 0; wm8994_writereg(priv, WM8994_DAC2_LEFT_MIXER_ROUTING, regval); /* 0x604=0x0000 */ regval = 0; /* 0x605=0x0000 */ wm8994_writereg(priv, WM8994_DAC2_RIGHT_MIXER_ROUTING, regval); break; case WM8994_OUTPUT_DEVICE_BOTH: if (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2) { wm8994_writereg(priv, 0x005, 0x0303 | 0x0c0c); wm8994_writereg(priv, 0x601, 0x0003); wm8994_writereg(priv, 0x602, 0x0003); wm8994_writereg(priv, 0x604, 0x0003); wm8994_writereg(priv, 0x605, 0x0003); } else { wm8994_writereg(priv, 0x005, 0x0303 | 0x0c0c); wm8994_writereg(priv, 0x601, 0x0001); wm8994_writereg(priv, 0x602, 0x0001); wm8994_writereg(priv, 0x604, 0x0002); wm8994_writereg(priv, 0x605, 0x0002); } break; case WM8994_OUTPUT_DEVICE_AUTO: wm8994_writereg(priv, 0x005, 0x0303); wm8994_writereg(priv, 0x601, 0x0001); wm8994_writereg(priv, 0x602, 0x0001); wm8994_writereg(priv, 0x604, 0x0000); wm8994_writereg(priv, 0x605, 0x0000); break; default: break; } } /* Configure the WM8994 hardware as an audio input device */ wm8994_audio_input(priv); switch (WM8994_DEFAULT_INPUT_DEVICE) { case WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_2: wm8994_writereg(priv, 0x004, 0x0c30); wm8994_writereg(priv, 0x450, 0x00db); wm8994_writereg(priv, 0x002, 0x6000); wm8994_writereg(priv, 0x608, 0x0002); wm8994_writereg(priv, 0x700, 0x000b); break; case WM8994_INPUT_DEVICE_INPUT_LINE_1: wm8994_writereg(priv, 0x028, 0x0011); wm8994_writereg(priv, 0x029, 0x0035); wm8994_writereg(priv, 0x02a, 0x0035); wm8994_writereg(priv, 0x004, 0x0303); wm8994_writereg(priv, 0x440, 0x00db); wm8994_writereg(priv, 0x002, 0x6350); wm8994_writereg(priv, 0x606, 0x0002); wm8994_writereg(priv, 0x607, 0x0002); wm8994_writereg(priv, 0x700, 0x000d); break; case WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_1: wm8994_writereg(priv, 0x004, 0x030c); wm8994_writereg(priv, 0x440, 0x00db); wm8994_writereg(priv, 0x002, 0x6350); wm8994_writereg(priv, 0x606, 0x0002); wm8994_writereg(priv, 0x607, 0x0002); wm8994_writereg(priv, 0x700, 0x000d); break; case WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2: wm8994_writereg(priv, 0x004, 0x0f3c); wm8994_writereg(priv, 0x450, 0x00db); wm8994_writereg(priv, 0x440, 0x00db); wm8994_writereg(priv, 0x002, 0x63a0); wm8994_writereg(priv, 0x606, 0x0002); wm8994_writereg(priv, 0x607, 0x0002); wm8994_writereg(priv, 0x608, 0x0002); wm8994_writereg(priv, 0x609, 0x0002); wm8994_writereg(priv, 0x700, 0x000d); break; case WM8994_INPUT_DEVICE_INPUT_LINE_2: default: break; } { switch (WM8994_DEFAULT_SAMPRATE) { case WM8994_AUDIO_FREQUENCY_8K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_8K; /* 0x210 = 0x0003 */ wm8994_writereg(priv, WM8994_AIF1_RATE, regval); break; case WM8994_AUDIO_FREQUENCY_16K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_16K; /* 0x210 = 0x0033 */ wm8994_writereg(priv, WM8994_AIF1_RATE, regval); break; case WM8994_AUDIO_FREQUENCY_22_050K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_22K; /* 0x210 = 0x0063 */ wm8994_writereg(priv, WM8994_AIF1_RATE, regval); break; #if 0 case WM8994_AUDIO_FREQUENCY_48K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_24K; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); /* 0x210 = 0x0083 */ break; #endif case WM8994_AUDIO_FREQUENCY_32K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_32K; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); /* 0x210 = 0x00a3 */ break; case WM8994_AUDIO_FREQUENCY_44_100K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_44K; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); /* 0x210 = 0x0013 */ break; case WM8994_AUDIO_FREQUENCY_48K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_48K; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); /* 0x210 = 0x0043 */ break; #if 0 case WM8994_AUDIO_FREQUENCY_44_100K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_88K; wm8994_writereg(priv, WM8994_AIF1_RATE, regval); /* 0x210 = 0x0073 */ break; #endif case WM8994_AUDIO_FREQUENCY_96K: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_96K; /* 0x210 = 0x00a3 */ wm8994_writereg(priv, WM8994_AIF1_RATE, regval); break; default: regval = WM8994_AIF1CLK_RATE_2 | WM8994_AIF1_SR_48K; /* 0x210 = 0x0083 */ wm8994_writereg(priv, WM8994_AIF1_RATE, regval); break; } if (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2) /* regval = 0x4018 */ regval = WM8994_AIF1ADCR_RIGHT_ADC | WM8994_AIF1_WL_16BITS | WM8994_AIF1_FMT_I2S; else /* regval = 0x4010 */ regval = WM8994_AIF1ADCR_RIGHT_ADC | WM8994_AIF1_WL_16BITS | WM8994_AIF1_FMT_DSP; /* 0x300 = */ wm8994_writereg(priv, WM8994_AIF1_CTL1, regval); regval = WM8994_AIF1_TRI_NORMAL | WM8994_AIF1_MSTR_SLAVE_MODE | WM8994_AIF1_CLK_FRC_NORMAL | WM8994_AIF1_LRCLK_FRC_NORMAL; /* 0x302 = 0x0000 */ wm8994_writereg(priv, WM8994_AIF1_MASTER_SLAVE, regval); regval = WM8994_AIF1DSPCLK_ENA | WM8994_SYSDSPCLK_ENA | WM8994_SYSCLK_SRC_AIF1CLK; /* 0x208 = 0x000a */ wm8994_writereg(priv, WM8994_CLK1, regval); regval = WM8994_AIF1CLK_ENA; /* 0x200 = 0x0001 */ wm8994_writereg(priv, WM8994_AIF1_CLK1, regval); if (WM8994_DEFAULT_OUTPUT_DEVICE == WM8994_OUTPUT_DEVICE_HEADPHONE) { regval = WM8994_DAC1L_TO_HPOUT1L_DAC1L; /* 0x2d = 0x0100 */ wm8994_writereg(priv, WM8994_OUTPUT_MIXER1, regval); regval = 0; wm8994_writereg(priv, WM8994_OUTPUT_MIXER2, regval); /* 0x2e = 0x0100 */ if (WM8994_STARTUP_MODE_COLD) { regval = 0x8100; wm8994_writereg(priv, WM8994_WR_CTL_SEQ1, regval); /* 0x110 = regval */ up_mdelay(300); } else { regval = 0x8108; wm8994_writereg(priv, WM8994_WR_CTL_SEQ1, regval); /* 0x110 = regval */ up_mdelay(50); } regval = 0; wm8994_writereg(priv, WM8994_AIF1_DAC1_FILTERS1, regval); /* 0x420 = 0x0000 */ } regval = 0; wm8994_writereg(priv, WM8994_PM3, regval); /* 0x03 = 0x0300 */ regval = 0; wm8994_writereg(priv, WM8994_SPKMIXL_ATT, regval); /* 0x22 = 0x0000 */ regval = 0; wm8994_writereg(priv, WM8994_SPKMIXR_ATT, regval); /* 0x23 = 0x0000 */ regval = 0; wm8994_writereg(priv, WM8994_SPEAKER_MIXER, regval); /* 0x36 = 0x0300 */ regval = 0; wm8994_writereg(priv, WM8994_PM1, regval); /* 0x01 = 0x3003 */ if (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2) regval = 0x0205; else regval = 0x0005; wm8994_writereg(priv, WM8994_CLASS_W_1, regval); /* 0x51 = regval */ priv->power_mgnt_reg_1 |= 0x0303 | 0x3003; regval = priv->power_mgnt_reg_1; wm8994_writereg(priv, WM8994_PM1, regval); /* 0x01 = power_mgnt_reg_1 */ regval = 0; wm8994_writereg(priv, WM8994_ANA_HP1, regval); /* 0x60 = 0x0022 */ regval = 0; wm8994_writereg(priv, WM8994_CHARGE_PUMP1, regval); /* 0x4c = 0x9F25 */ up_mdelay(15); regval = 0; wm8994_writereg(priv, WM8994_OUTPUT_MIXER1, regval); /* 0x2d = 0x0001 */ regval = 0; wm8994_writereg(priv, 0x2e, regval); /* 0x2e = 0x0001 */ regval = 0; wm8994_writereg(priv, 0x03, regval); /* 0x03 = 0x0030 | 0x0300 */ regval = 0x0033; wm8994_writereg(priv, 0x54, regval); /* 0x54 = 0x0033 */ up_mdelay(257); regval = 0x00ee; wm8994_writereg(priv, 0x60, 0x00ee); /* 0x60 = 0x00ee */ regval = 0x00c0; wm8994_writereg(priv, 0x610, regval); /* 0x610 = 0x00c0 */ regval = 0x00c0; wm8994_writereg(priv, 0x611, regval); /* 0x611 = 0x00c0 */ regval = 0x0010; wm8994_writereg(priv, 0x420, regval); /* 0x420 = 0x0010 */ regval = 0x00c0; wm8994_writereg(priv, 0x612, regval); /* 0x612 = 0x00c0 */ regval = 0x00c0; wm8994_writereg(priv, 0x613, regval); /* 0x613 = 0x00c0 */ regval = 0x0010; wm8994_writereg(priv, 0x422, regval); /* 0x422 = 0x0010 */ if ((WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_1) || (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MICROPHONE_2)) { priv->power_mgnt_reg_1 |= 0x0013; wm8994_writereg(priv, 0x01, priv->power_mgnt_reg_1); /* 0x01 = power_mgnt_reg_1 */ regval = 0x0002; wm8994_writereg(priv, 0x620, 0x0002); /* 0x620 = 0x0002 */ regval = 0x3800; wm8994_writereg(priv, 0x411, 0x3800); /* 0x411 = 0x3800 */ } else if (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_DIGITAL_MIC1_MIC2) { priv->power_mgnt_reg_1 |= 0x0013; wm8994_writereg(priv, 0x01, priv->power_mgnt_reg_1); /* 0x01 = power_mgnt_reg_1 */ regval = 0x0002; wm8994_writereg(priv, 0x620, regval); /* 0x620 = 0x0002; */ regval = 0x1800; wm8994_writereg(priv, 0x410, regval); /* 0x410 = 0x1800 */ regval = 0x1800; wm8994_writereg(priv, 0x411, regval); /* 0x411 = 0x1800 */ } else if ((WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_INPUT_LINE_1) || (WM8994_DEFAULT_INPUT_DEVICE == WM8994_INPUT_DEVICE_INPUT_LINE_2)) { regval = 0x000b; wm8994_writereg(priv, 0x18, regval); /* 0x18 = 0x000b */ regval = 0x000b; wm8994_writereg(priv, 0x1a, regval); /* 0x1A = 0x000B */ regval = 0x1800; wm8994_writereg(priv, 0x410, regval); /* 0x410 = 0x1800 */ } } #endif /* Configure the WM8994 hardware as an audio output device */ wm8994_audio_output(priv); /* Configure interrupts */ wm8994_configure_ints(priv); /* Configure the FLL and the LRCLK */ wm8994_setbitrate(priv); /* Dump some information and return the device instance */ wm8994_dump_registers(&priv->dev, "After configuration"); wm8994_clock_analysis(&priv->dev, "After configuration"); } /**************************************************************************** * Public Functions ****************************************************************************/ /* Name: wm8994_initialize * * Description: * Initialize the WM8994 device. * * Input Parameters: * i2c - An I2C driver instance * i2s - An I2S driver instance * lower - Persistent board configuration data * * Returned Value: * A new lower half audio interface for the WM8994 device is returned on * success; NULL is returned on failure. * */ FAR struct audio_lowerhalf_s * wm8994_initialize(FAR struct i2c_master_s *i2c, FAR struct i2s_dev_s *i2s, FAR const struct wm8994_lower_s *lower) { FAR struct wm8994_dev_s *priv; uint16_t regval; /* Sanity check */ DEBUGASSERT(i2c && i2s && lower); /* Allocate a WM8994 device structure */ priv = kmm_zalloc(sizeof(struct wm8994_dev_s)); if (priv) { /* Initialize the WM8994 device structure. Since we used kmm_zalloc, * only the non-zero elements of the structure need to be initialized. */ priv->dev.ops = &g_audioops; priv->lower = lower; priv->i2c = i2c; priv->i2s = i2s; nxmutex_init(&priv->pendlock); dq_init(&priv->pendq); dq_init(&priv->doneq); /* Verify that WM8994 is present and available on this I2C */ regval = wm8994_readreg(priv, WM8994_ID); if (regval != WM8994_SW_RST_DEV_ID1) { auderr("ERROR: WM8994 not found: ID=%04x\n", regval); goto errout_with_dev; } /* Software reset. This puts all WM8994 registers back in their * default state. */ wm8994_writereg(priv, WM8994_SWRST, 0); wm8994_dump_registers(&priv->dev, "After reset"); /* chip revision */ audinfo("wm8994 chip revision: %d\n", wm8994_readreg(priv, WM8994_CHIP_REV)); /* Reset and reconfigure the WM8994 hardwaqre */ wm8994_hw_reset(priv); return &priv->dev; } return NULL; errout_with_dev: nxmutex_destroy(&priv->pendlock); kmm_free(priv); return NULL; }