/**************************************************************************** * net/netlink/netlink.h * * SPDX-License-Identifier: Apache-2.0 * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __NET_NETLINK_NETLINK_H #define __NET_NETLINK_NETLINK_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "devif/devif.h" #include "socket/socket.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef CONFIG_NETLINK_ROUTE # define netlink_device_notify(dev) # define netlink_device_notify_ipaddr(dev, type, domain, addr, preflen) # define netlink_route_notify(route, type, domain) # define netlink_neigh_notify(neigh, type, domain) # define netlink_ipv6_prefix_notify(dev, type, pinfo) #endif #ifdef CONFIG_NET_NETLINK /* nla_for_each_attr - iterate over a stream of attributes * pos: loop counter, set to current attribute * head: head of attribute stream * len: length of attribute stream * rem: initialized to len, holds bytes currently remaining in stream */ #define nla_for_each_attr(pos, head, len, rem) \ for (pos = head, rem = len; nla_ok(pos, rem); \ pos = nla_next(pos, &(rem))) /* Always use this macro, this allows later putting the * message into a separate section or such for things * like translation or listing all possible messages. * Currently string formatting is not supported (due * to the lack of an output buffer.) */ #define nl_set_err_msg_attr(extack, attr, msg) \ do \ { \ static const char __msg[] = (msg); \ FAR struct netlink_ext_ack *__extack = (extack); \ if (__extack) \ { \ __extack->_msg = __msg; \ __extack->bad_attr = (attr); \ } \ } \ while (0) /* nla_data - head of payload * nla: netlink attribute */ #define nla_data(nla) ((FAR void *)((FAR char *)(nla) + NLA_HDRLEN)) /* nla_len - length of payload * nla: netlink attribute */ #define nla_len(nla) ((nla)->nla_len - NLA_HDRLEN) /* nla_type - attribute type * nla: netlink attribute */ #define nla_type(nla) ((nla)->nla_type & NLA_TYPE_MASK) /* nla_ok - check if the netlink attribute fits into the remaining bytes * nla: netlink attribute * remaining: number of bytes remaining in attribute stream */ #define nla_ok(nla, remaining) \ ((remaining) >= sizeof(*(nla)) && \ (nla)->nla_len >= sizeof(*(nla)) && \ (nla)->nla_len <= (remaining)) /* nlmsg_msg_size - length of netlink message not including padding * payload: length of message payload */ #define nlmsg_msg_size(payload) (NLMSG_HDRLEN + (payload)) /* nlmsg_len - length of message payload * nlh: netlink message header */ #define nlmsg_len(nlh) ((nlh)->nlmsg_len - NLMSG_HDRLEN) /* nlmsg_attrlen - length of attributes data * nlh: netlink message header * hdrlen: length of family specific header */ #define nlmsg_attrlen(nlh, hdrlen) (nlmsg_len(nlh) - NLMSG_ALIGN(hdrlen)) /* nlmsg_data - head of message payload * nlh: netlink message header */ #define nlmsg_data(nlh) ((FAR void *)((FAR char *)(nlh) + NLMSG_HDRLEN)) /* nla_get_in_addr - return payload of IPv4 address attribute * nla: IPv4 address netlink attribute */ #define nla_get_in_addr(nla) (*(FAR uint32_t *)nla_data(nla)) /* nlmsg_attrdata - head of attributes data * nlh: netlink message header * hdrlen: length of family specific header */ #define nlmsg_attrdata(nlh, hdrlen) \ ((FAR struct nlattr *)((FAR char *)nlmsg_data(nlh) + NLMSG_ALIGN(hdrlen))) /* nlmsg_parse - parse attributes of a netlink message * nlh: netlink message header * hdrlen: length of family specific header * tb: destination array with maxtype+1 elements * maxtype: maximum attribute type to be expected * policy: validation policy * extack: extended ACK report struct * * See nla_parse() */ #define nlmsg_parse(nlh, hdrlen, tb, maxtype, policy, extack) \ ((nlh)->nlmsg_len < nlmsg_msg_size(hdrlen) ? -EINVAL : \ nla_parse(tb, maxtype, nlmsg_attrdata(nlh, hdrlen), \ nlmsg_attrlen(nlh, hdrlen), policy, extack)) /* this can be increased when necessary - don't expose to userland */ #define NETLINK_MAX_COOKIE_LEN 20 /**************************************************************************** * Public Type Definitions ****************************************************************************/ /* This connection structure describes the underlying state of the socket. */ struct netlink_conn_s { /* Common prologue of all connection structures. */ struct socket_conn_s sconn; /* NetLink-specific content follows */ uint32_t pid; /* Port ID (if bound) */ uint32_t groups; /* Multicast groups mask (if bound) */ uint32_t dst_pid; /* Destination port ID */ uint32_t dst_groups; /* Destination multicast groups mask */ uint8_t crefs; /* Reference counts on this instance */ /* poll() support */ int key; /* used to cancel notifications */ FAR struct pollfd *fds; /* Used to wakeup poll() */ /* Queued response data */ sq_queue_t resplist; /* Singly linked list of responses */ }; /* Standard attribute types to specify validation policy */ enum { NLA_UNSPEC, NLA_U8, NLA_U16, NLA_U32, NLA_U64, NLA_STRING, NLA_FLAG, NLA_MSECS, NLA_NESTED, NLA_NESTED_COMPAT, NLA_NUL_STRING, NLA_BINARY, NLA_S8, NLA_S16, NLA_S32, NLA_S64, NLA_BITFIELD32, NLA_TYPE_MAX = NLA_BITFIELD32, }; /* struct netlink_ext_ack - netlink extended ACK report struct * _msg: message string to report - don't access directly, use * nl_set_err_msg_attr * bad_attr: attribute with error * cookie: cookie data to return to userspace (for success) * cookie_len: actual cookie data length */ struct netlink_ext_ack { FAR const char *_msg; FAR const struct nlattr *bad_attr; uint8_t cookie[NETLINK_MAX_COOKIE_LEN]; uint8_t cookie_len; }; /* struct nla_policy - attribute validation policy * type: Type of attribute or NLA_UNSPEC * len: Type specific length of payload * * Policies are defined as arrays of this struct, the array must be * accessible by attribute type up to the highest identifier to be expected. * * Meaning of `len' field: * NLA_STRING Maximum length of string * NLA_NUL_STRING Maximum length of string (excluding NUL) * NLA_FLAG Unused * NLA_BINARY Maximum length of attribute payload * NLA_NESTED Don't use `len' field -- length verification is * done by checking len of nested header (or empty) * NLA_NESTED_COMPAT Minimum length of structure payload * NLA_U8, NLA_U16, * NLA_U32, NLA_U64, * NLA_S8, NLA_S16, * NLA_S32, NLA_S64, * NLA_MSECS Leaving the length field zero will verify the * given type fits, using it verifies minimum length * just like "All other" * NLA_BITFIELD32 A 32-bit bitmap/bitselector attribute * All other Minimum length of attribute payload * * Example: * static const struct nla_policy my_policy[ATTR_MAX + 1] = { * [ATTR_FOO] = { .type = NLA_U16 }, * [ATTR_BAR] = { .type = NLA_STRING, .len = BARSIZ }, * [ATTR_BAZ] = { .len = sizeof(struct mystruct) }, * [ATTR_GOO] = { .type = NLA_BITFIELD32, .validation_data = * &myvalidflags }, * }; */ struct nla_policy { uint16_t type; uint16_t len; FAR void *validation_data; }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus # define EXTERN extern "C" extern "C" { #else # define EXTERN extern #endif EXTERN const struct sock_intf_s g_netlink_sockif; /**************************************************************************** * Name: netlink_initialize() * * Description: * Initialize the NetLink connection structures. Called once and only * from the networking layer. * ****************************************************************************/ void netlink_initialize(void); /**************************************************************************** * Name: netlink_alloc() * * Description: * Allocate a new, uninitialized NetLink connection structure. This is * normally something done by the implementation of the socket() API * ****************************************************************************/ FAR struct netlink_conn_s *netlink_alloc(void); /**************************************************************************** * Name: netlink_free() * * Description: * Free a NetLink connection structure that is no longer in use. This * should be done by the implementation of close(). * ****************************************************************************/ void netlink_free(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_nextconn() * * Description: * Traverse the list of allocated NetLink connections * * Assumptions: * This function is called from NetLink device logic. * ****************************************************************************/ FAR struct netlink_conn_s *netlink_nextconn(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_notifier_setup * * Description: * Set up to perform a callback to the worker function the Netlink * response data is received. The worker function will execute on the low * priority worker thread. * * Input Parameters: * worker - The worker function to execute on the low priority work * queue when Netlink response data is available. * conn - The Netlink connection where the response is expected. * arg - A user-defined argument that will be available to the worker * function when it runs. * * Returned Value: * Zero (OK) is returned if the notification was successfully set up. * A negated error value is returned if an unexpected error occurred * and no notification will occur. * ****************************************************************************/ int netlink_notifier_setup(worker_t worker, FAR struct netlink_conn_s *conn, FAR void *arg); /**************************************************************************** * Name: netlink_notifier_teardown * * Description: * Eliminate a Netlink response notification previously setup by * netlink_notifier_setup(). This function should only be called if the * notification should be aborted prior to the notification. The * notification will automatically be torn down after the notification. * * Input Parameters: * conn - Teardown the notification for this Netlink connection. * ****************************************************************************/ void netlink_notifier_teardown(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_notifier_signal * * Description: * New Netlink response data is available. Execute worker thread * functions for all threads that wait for response data. * * Input Parameters: * conn - The Netlink connection where the response was just buffered. * * Returned Value: * None. * ****************************************************************************/ void netlink_notifier_signal(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_add_terminator * * Description: * Add one NLMSG_DONE response to handle. * * Input Parameters: * handle - The handle previously provided to the sendto() implementation * for the protocol. This is an opaque reference to the Netlink * socket state structure. * req - The request message header. * group - The broadcast group index, 0 for normal response. * * Returned Value: * Zero (OK) is returned if the terminator was successfully added to the * response list. * A negated error value is returned if an unexpected error occurred. * ****************************************************************************/ int netlink_add_terminator(NETLINK_HANDLE handle, FAR const struct nlmsghdr *req, int group); /**************************************************************************** * Name: netlink_tryget_response * * Description: * Return the next response from the head of the pending response list. * Responses are returned one-at-a-time in FIFO order. * * Note: The network will be momentarily locked to support exclusive * access to the pending response list. * * Returned Value: * The next response from the head of the pending response list is * returned. NULL will be returned if the pending response list is * empty * ****************************************************************************/ FAR struct netlink_response_s * netlink_tryget_response(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_get_response * * Description: * Return the next response from the head of the pending response list. * Responses are returned one-at-a-time in FIFO order. * * Note: The network will be momentarily locked to support exclusive * access to the pending response list. * * Returned Value: * The next response from the head of the pending response list is * returned. This function will block until a response is received if * the pending response list is empty. NULL will be returned only in the * event of a failure. * ****************************************************************************/ FAR struct netlink_response_s * netlink_get_response(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_check_response * * Description: * Return true is a response is pending now. * * Returned Value: * True: A response is available; False; No response is available. * ****************************************************************************/ bool netlink_check_response(FAR struct netlink_conn_s *conn); /**************************************************************************** * Name: netlink_route_sendto() * * Description: * Perform the sendto() operation for the NETLINK_ROUTE protocol. * ****************************************************************************/ #ifdef CONFIG_NETLINK_ROUTE ssize_t netlink_route_sendto(NETLINK_HANDLE handle, FAR const struct nlmsghdr *nlmsg, size_t len, int flags, FAR const struct sockaddr_nl *to, socklen_t tolen); /**************************************************************************** * Name: netlink_device_notify() * * Description: * Perform the route broadcast for the NETLINK_ROUTE protocol. * ****************************************************************************/ void netlink_device_notify(FAR struct net_driver_s *dev); /**************************************************************************** * Name: netlink_device_notify_ipaddr() * * Description: * Perform the route broadcast for the NETLINK_ROUTE protocol. * ****************************************************************************/ void netlink_device_notify_ipaddr(FAR struct net_driver_s *dev, int type, int domain, FAR const void *addr, uint8_t preflen); /**************************************************************************** * Name: netlink_route_notify * * Description: * Perform the route broadcast for the NETLINK_NETFILTER protocol. * * Input Parameters: * route - The route entry * type - The type of the message, RTM_*ROUTE * domain - The domain of the message * ****************************************************************************/ #if defined CONFIG_NETLINK_DISABLE_GETROUTE # define netlink_route_notify(route, type, domain) #else void netlink_route_notify(FAR const void *route, int type, int domain); #endif /**************************************************************************** * Name: netlink_neigh_notify() * * Description: * Perform the neigh broadcast for the NETLINK_ROUTE protocol. * * Input Parameters: * neigh - The ARP entry or neighbour entry * type - The type of the message, RTM_*NEIGH * domain - The domain of the message * ****************************************************************************/ #if defined(CONFIG_NETLINK_DISABLE_GETNEIGH) # define netlink_neigh_notify(neigh, type, domain) #else void netlink_neigh_notify(FAR const void *neigh, int type, int domain); #endif /**************************************************************************** * Name: netlink_ipv6_prefix_notify() * * Description: * Perform the RA prefix for the NETLINK_ROUTE protocol. * ****************************************************************************/ #if defined(CONFIG_NETLINK_DISABLE_NEWPREFIX) || !defined(CONFIG_NET_IPv6) # define netlink_ipv6_prefix_notify(dev, type, pinfo) #else void netlink_ipv6_prefix_notify(FAR struct net_driver_s *dev, int type, FAR const struct icmpv6_prefixinfo_s *pinfo); #endif /**************************************************************************** * Name: nla_next * * Description: * Next netlink attribute in attribute stream. * * Input Parameters: * nla - netlink attribute. * remaining - number of bytes remaining in attribute stream. * * Returned Value: * Returns the next netlink attribute in the attribute stream and * decrements remaining by the size of the current attribute. * ****************************************************************************/ FAR struct nlattr *nla_next(FAR const struct nlattr *nla, FAR int *remaining); /**************************************************************************** * Name: nla_parse * * Description: * Parse the nested netlink attribute. * ****************************************************************************/ int nla_parse(FAR struct nlattr **tb, int maxtype, FAR const struct nlattr *head, int len, FAR const struct nla_policy *policy, FAR struct netlink_ext_ack *extack); #endif /* CONFIG_NETLINK_ROUTE */ /**************************************************************************** * Name: netlink_netfilter_sendto * * Description: * Perform the sendto() operation for the NETLINK_NETFILTER protocol. * ****************************************************************************/ #ifdef CONFIG_NETLINK_NETFILTER ssize_t netlink_netfilter_sendto(NETLINK_HANDLE handle, FAR const struct nlmsghdr *nlmsg, size_t len, int flags, FAR const struct sockaddr_nl *to, socklen_t tolen); /**************************************************************************** * Name: netlink_conntrack_notify * * Description: * Perform the conntrack broadcast for the NETLINK_NETFILTER protocol. * * Input Parameters: * type - The type of the message, IPCTNL_MSG_CT_* * domain - The domain of the message * nat_entry - The NAT entry * ****************************************************************************/ void netlink_conntrack_notify(uint8_t type, uint8_t domain, FAR const void *nat_entry); #endif /* CONFIG_NETLINK_NETFILTER */ #undef EXTERN #ifdef __cplusplus } #endif #endif /* CONFIG_NET_NETLINK */ #endif /* __NET_NETLINK_NETLINK_H */