148 lines
5.1 KiB
ReStructuredText
148 lines
5.1 KiB
ReStructuredText
.. include:: /substitutions.rst
|
|
.. _rndis:
|
|
|
|
================
|
|
How to use RNDIS
|
|
================
|
|
|
|
This guide explains the steps needed to get USB RNDIS working, using
|
|
the STM32F4Discovery board as example.
|
|
|
|
If you don't know RNDIS, it is a way to share Ethernet-like connection
|
|
over USB port without using any external device to it. Just a USB cable
|
|
between your board (that has USB Device) and your computer.
|
|
|
|
WARNING: RNDIS is going to be removed from Linux kernel because they
|
|
understand it as an unsecure protocol. That said use it aware of this
|
|
risk and also be aware that it was tested up to Ubuntu 22.04 LTS and
|
|
couldn't work in future versions.
|
|
|
|
Compiling
|
|
=========
|
|
|
|
#. Configure the RNDIS
|
|
|
|
There is a sample configuration to use RNDIS on stm32f4discovery
|
|
board. If your board doesn't save a sample example then you need
|
|
to create a configuration by yourself looking this config.
|
|
|
|
Just use ``stm32f4discovery:rndis`` board profile for this purpose.
|
|
|
|
.. code-block:: console
|
|
|
|
$ cd nuttx
|
|
$ ./tools/configure.sh stm32f4discovery:rndis
|
|
|
|
#. Compile
|
|
|
|
.. code-block:: console
|
|
|
|
$ make -j
|
|
|
|
Flashing
|
|
========
|
|
|
|
#. Flash the generated nuttx.bin to your board:
|
|
|
|
.. code-block:: console
|
|
|
|
$ $ sudo openocd -f interface/stlink.cfg -f target/stm32f4x.cfg -c init -c "reset halt" -c "flash write_image erase nuttx.bin 0x08000000"
|
|
...
|
|
Open On-Chip Debugger 0.11.0
|
|
...
|
|
Info : STLINK V2J14S0 (API v2) VID:PID 0483:3748
|
|
Info : Target voltage: 3.203144
|
|
Info : stm32f4x.cpu: hardware has 6 breakpoints, 4 watchpoints
|
|
Info : starting gdb server for stm32f4x.cpu on 3333
|
|
Info : Listening on port 3333 for gdb connections
|
|
target halted due to debug-request, current mode: Thread
|
|
xPSR: 0x01000000 pc: 0x08000188 msp: 0x20003f24
|
|
Info : device id = 0x10036413
|
|
Info : flash size = 1024 kbytes
|
|
auto erase enabled
|
|
wrote 262144 bytes from file nuttx.bin in 11.043253s (23.182 KiB/s)
|
|
Info : Listening on port 6666 for tcl connections
|
|
Info : Listening on port 4444 for telnet connections
|
|
|
|
|
|
Setup RNDIS in your computer
|
|
============================
|
|
|
|
These steps show how to connect your board to your Linux machine.
|
|
|
|
.. todo:: Add Mac and Windows instructions
|
|
|
|
#. Reset your board
|
|
|
|
#. Plug a USB cable from the STM32F4Discovery's microUSB to your computer
|
|
|
|
#. Confirm that your board was detected as a USB RNDIS device:
|
|
|
|
.. code-block:: console
|
|
|
|
$ dmesg
|
|
...
|
|
[ 1099.821480] usb 3-3: new full-speed USB device number 12 using xhci_hcd
|
|
[ 1099.972379] usb 3-3: New USB device found, idVendor=584e, idProduct=5342, bcdDevice= 0.01
|
|
[ 1099.972389] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
|
|
[ 1099.972393] usb 3-3: Product: RNDIS gadget
|
|
[ 1099.972396] usb 3-3: Manufacturer: NuttX
|
|
[ 1099.972398] usb 3-3: SerialNumber: 1234
|
|
[ 1099.988952] usbcore: registered new interface driver cdc_ether
|
|
[ 1099.990144] rndis_host 3-3:1.0: skipping garbage
|
|
[ 1099.990641] rndis_host 3-3:1.0: dev can't take 1558 byte packets (max 660), adjusting MTU to 602
|
|
[ 1099.992089] rndis_host 3-3:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, a0:e0:de:ad:ca:fe
|
|
[ 1099.992102] usbcore: registered new interface driver rndis_host
|
|
[ 1099.994026] usbcore: registered new interface driver rndis_wlan
|
|
[ 1099.997001] rndis_host 3-3:1.0 enxa0e0deadcafe: renamed from eth0
|
|
|
|
#. Configure your Linux distro to share network to this USB RNDIS device:
|
|
|
|
Click in the top right corner of your Ubuntu and go to:
|
|
|
|
NuttX Ethernet -> Wired Settings
|
|
|
|
Click in the 'Gear icon' and in the tab "IPv4" select: "Shared to other computers"
|
|
|
|
Click on "Apply"
|
|
|
|
Disconnect and connect the USB cable to force it to get IP.
|
|
|
|
#. Identify what IP address your board got:
|
|
|
|
.. code-block:: console
|
|
|
|
$ tail -f /var/log/syslog
|
|
...
|
|
Jan 28 10:30:24 dev dnsmasq-dhcp[35526]: DHCPDISCOVER(enxa0e0deadcafe) 00:e0:de:ad:ca:fe
|
|
Jan 28 10:30:24 dev dnsmasq-dhcp[35526]: DHCPOFFER(enxa0e0deadcafe) 10.42.0.86 00:e0:de:ad:ca:fe
|
|
Jan 28 10:30:24 dev dnsmasq-dhcp[35526]: DHCPREQUEST(enxa0e0deadcafe) 10.42.0.86 00:e0:de:ad:ca:fe
|
|
Jan 28 10:30:24 dev dnsmasq-dhcp[35526]: DHCPACK(enxa0e0deadcafe) 10.42.0.86 00:e0:de:ad:ca:fe nuttx
|
|
Jan 28 10:30:29 dev systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
|
|
^C
|
|
|
|
#. Ping this IP to confirm it is working:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ping 10.42.0.86
|
|
PING 10.42.0.86 (10.42.0.86) 56(84) bytes of data.
|
|
64 bytes from 10.42.0.86: icmp_seq=1 ttl=64 time=0.809 ms
|
|
64 bytes from 10.42.0.86: icmp_seq=2 ttl=64 time=0.849 ms
|
|
^C
|
|
--- 10.42.0.86 ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1027ms
|
|
rtt min/avg/max/mdev = 0.809/0.829/0.849/0.020 ms
|
|
|
|
#. Connect to your board over telnet:
|
|
|
|
.. code-block:: console
|
|
|
|
$ telnet 10.42.0.86
|
|
Trying 10.42.0.86...
|
|
Connected to 10.42.0.86.
|
|
Escape character is '^]'.
|
|
|
|
NuttShell (NSH) NuttX-12.0.0
|
|
nsh>
|