nuttx/net/can/can_callback.c

/****************************************************************************
 * net/can/can_callback.c
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_NET_CAN)

#include <stdint.h>
#include <debug.h>

#include <nuttx/net/netconfig.h>
#include <nuttx/net/netdev.h>
#include <nuttx/mm/iob.h>

#include "devif/devif.h"
#include "can/can.h"

#ifdef CONFIG_NET_TIMESTAMP
#include <sys/time.h>
#endif

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: can_data_event
 *
 * Description:
 *   Handle data that is not accepted by the application because there is no
 *   listener in place ready to receive the data.
 *
 * Assumptions:
 * - The caller has checked that CAN_NEWDATA is set in flags and that is no
 *   other handler available to process the incoming data.
 * - This function must be called with the network locked.
 *
 ****************************************************************************/

static inline uint16_t
can_data_event(FAR struct net_driver_s *dev, FAR struct can_conn_s *conn,
               uint16_t flags)
{
  int buflen = dev->d_len;
  uint16_t recvlen;
  uint16_t ret;

  ret = (flags & ~CAN_NEWDATA);

  /* Save as the packet data as in the read-ahead buffer.  NOTE that
   * partial packets will not be buffered.
   */

  recvlen = can_datahandler(dev, conn);
  if (recvlen < buflen)
    {
      /* There is no handler to receive new data and there are no free
       * read-ahead buffers to retain the data -- drop the packet.
       */

      ninfo("Dropped %d bytes\n", dev->d_len);

#ifdef CONFIG_NET_STATISTICS
      /* No support CAN net statistics yet */

      /* g_netstats.tcp.drop++; */

#endif
    }

  /* In any event, the new data has now been handled */

  dev->d_len = 0;
  return ret;
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: can_callback
 *
 * Description:
 *   Inform the application holding the packet socket of a change in state.
 *
 * Returned Value:
 *   OK if packet has been processed, otherwise ERROR.
 *
 * Assumptions:
 *   This function can be called from an interrupt.
 *
 ****************************************************************************/

uint16_t can_callback(FAR struct net_driver_s *dev,
                      FAR struct can_conn_s *conn, uint16_t flags)
{
  /* Some sanity checking */

  if (conn)
    {
      /* Try to lock the network when successful send data to the listener */

      if (net_trylock() == OK)
        {
          flags = devif_conn_event(dev, flags, conn->sconn.list);
          net_unlock();
        }

      /* Either we did not get the lock or there is no application listening
       * If we did not get a lock we store the frame in the read-ahead buffer
       */

      if ((flags & CAN_NEWDATA) != 0)
        {
#ifdef CONFIG_NET_TIMESTAMP
          /* TIMESTAMP sockopt is activated,
           * create timestamp and copy to iob
           */

          if (conn->timestamp)
            {
              struct timeval tv;
              FAR struct timespec *ts = (FAR struct timespec *)&tv;
              int len;

              clock_systime_timespec(ts);
              tv.tv_usec = ts->tv_nsec / 1000;

              len = iob_trycopyin(dev->d_iob, (FAR uint8_t *)&tv,
                                  sizeof(struct timeval),
                                  -CONFIG_NET_LL_GUARDSIZE, false);
              if (len != sizeof(struct timeval))
                {
                  dev->d_len = 0;
                  return flags & ~CAN_NEWDATA;
                }
              else
                {
                  dev->d_len += len;
                }
            }

#endif
          /* Data was not handled.. dispose of it appropriately */

          flags = can_data_event(dev, conn, flags);
        }
    }

  return flags;
}

/****************************************************************************
 * Name: can_datahandler
 *
 * Description:
 *   Handle data that is not accepted by the application.  This may be called
 *   either (1) from the data receive logic if it cannot buffer the data, or
 *   (2) from the CAN event logic is there is no listener in place ready to
 *   receive the data.
 *
 * Input Parameters:
 *   dev  - The device which as active when the event was detected.
 *   conn - A pointer to the CAN connection structure
 *
 * Returned Value:
 *   The number of bytes actually buffered is returned.  This will be either
 *   zero or equal to buflen; partial packets are not buffered.
 *
 * Assumptions:
 * - The caller has checked that CAN_NEWDATA is set in flags and that is no
 *   other handler available to process the incoming data.
 * - This function must be called with the network locked.
 *
 ****************************************************************************/

uint16_t can_datahandler(FAR struct net_driver_s *dev,
                         FAR struct can_conn_s *conn)
{
  FAR struct iob_s *iob = dev->d_iob;
  int ret = 0;

#if CONFIG_NET_RECV_BUFSIZE > 0
  /* Check the frame count pending on conn->readahead */

  if (iob_get_queue_entry_count(&conn->readahead) >= conn->recv_buffnum)
    {
      nwarn("WARNNING: There are no free recive buffer to retain the data. "
            "Recive buffer number:%"PRId32", recived frames:%"PRIuPTR" \n",
            conn->recv_buffnum, iob_get_queue_entry_count(&conn->readahead));
      goto errout;
    }
#endif

  /* Concat the iob to readahead */

  ret = iob_tryadd_queue(iob, &conn->readahead);
  if (ret >= 0)
    {
#ifdef CONFIG_NET_CAN_NOTIFIER
      /* Provide notification(s) that additional CAN read-ahead data is
       * available.
       */

      can_readahead_signal(conn);
#endif
      ret = iob->io_pktlen;

      /* Device buffer has been enqueued, clear the handle */

      netdev_iob_clear(dev);
    }
  else
    {
      nerr("ERROR: Failed to queue the I/O buffer chain: %d\n", ret);
      goto errout;
    }

  return ret;

errout:
  netdev_iob_release(dev);
  return ret;
}

#endif /* CONFIG_NET && CONFIG_NET_CAN */