sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
bug/duktape-crash-ctrl-c
nuttx/sched/irq/irq_csection.c
hujun5 d54bc8a9f8 arch: remove up_cpu_pause up_cpu_resume up_cpu_paused up_cpu_pausereq 
reason:
  To remove the "sync pause" and decouple the critical section from the dependency on enabling interrupts,
  after that we need to further implement "schedlock + spinlock".
changelist
  1 Modify the implementation of critical sections to no longer involve enabling interrupts or handling synchronous pause events.
  2 GIC_SMP_CPUCALL attach to pause handler to remove arch interface up_cpu_paused_restore up_cpu_paused_save
  3 Completely remove up_cpu_pause, up_cpu_resume, up_cpu_paused, and up_cpu_pausereq
  4 change up_cpu_pause_async to up_send_cpu_sgi

Signed-off-by: hujun5 <hujun5@xiaomi.com>
2024-10-11 01:30:51 +08:00

462 lines
14 KiB
C
Raw Permalink Blame History

/****************************************************************************
* sched/irq/irq_csection.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <assert.h>
#include <nuttx/init.h>
#include <nuttx/spinlock.h>
#include <nuttx/sched_note.h>
#include <arch/irq.h>
#include "sched/sched.h"
#include "irq/irq.h"
#ifdef CONFIG_IRQCOUNT
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifdef CONFIG_SMP
# define cpu_irqlock_set(cpu) \
do \
{ \
g_cpu_irqset |= (1 << cpu); \
} \
while (0)
#endif
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef CONFIG_SMP
/* This is the spinlock that enforces critical sections when interrupts are
* disabled.
*/
volatile spinlock_t g_cpu_irqlock = SP_UNLOCKED;
/* Used to keep track of which CPU(s) hold the IRQ lock. */
volatile cpu_set_t g_cpu_irqset;
/* Handles nested calls to enter_critical section from interrupt handlers */
volatile uint8_t g_cpu_nestcount[CONFIG_SMP_NCPUS];
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: enter_critical_section
*
* Description:
* Take the CPU IRQ lock and disable interrupts on all CPUs. A thread-
* specific counter is incremented to indicate that the thread has IRQs
* disabled and to support nested calls to enter_critical_section().
*
****************************************************************************/
#ifdef CONFIG_SMP
irqstate_t enter_critical_section(void)
{
FAR struct tcb_s *rtcb;
irqstate_t ret;
int cpu;
/* Disable interrupts.
*
* NOTE 1: Ideally this should disable interrupts on all CPUs, but most
* architectures only support disabling interrupts on the local CPU.
* NOTE 2: Interrupts may already be disabled, but we call up_irq_save()
* unconditionally because we need to return valid interrupt status in any
* event.
* NOTE 3: We disable local interrupts BEFORE taking the spinlock in order
* to prevent possible waits on the spinlock from interrupt handling on
* the local CPU.
*/
ret = up_irq_save();
/* If called from an interrupt handler, then just take the spinlock.
* If we are already in a critical section, this will lock the CPU
* in the interrupt handler. Sounds worse than it is.
*/
if (up_interrupt_context())
{
/* We are in an interrupt handler. How can this happen?
*
* 1. We were not in a critical section when the interrupt
* occurred. In this case, the interrupt was entered with:
*
* g_cpu_irqlock = SP_UNLOCKED.
* g_cpu_nestcount = 0
* All CPU bits in g_cpu_irqset should be zero
*
* 2. We were in a critical section and interrupts on this
* this CPU were disabled -- this is an impossible case.
*
* 3. We were in critical section, but up_irq_save() only
* disabled local interrupts on a different CPU;
* Interrupts could still be enabled on this CPU.
*
* g_cpu_irqlock = SP_LOCKED.
* g_cpu_nestcount = 0
* The bit in g_cpu_irqset for this CPU should be zero
*
* 4. An extension of 3 is that we may be re-entered numerous
* times from the same interrupt handler. In that case:
*
* g_cpu_irqlock = SP_LOCKED.
* g_cpu_nestcount > 0
* The bit in g_cpu_irqset for this CPU should be zero
*
* NOTE: However, the interrupt entry conditions can change due
* to previous processing by the interrupt handler that may
* instantiate a new thread that has irqcount > 0 and may then
* set the bit in g_cpu_irqset and g_cpu_irqlock = SP_LOCKED
*/
/* Handle nested calls to enter_critical_section() from the same
* interrupt.
*/
cpu = this_cpu();
if (g_cpu_nestcount[cpu] > 0)
{
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock) &&
g_cpu_nestcount[cpu] < UINT8_MAX);
g_cpu_nestcount[cpu]++;
}
/* This is the first call to enter_critical_section from the
* interrupt handler.
*/
else
{
/* Make sure that the g_cpu_irqset was not already set
* by previous logic on this CPU that was executed by the
* interrupt handler. We know that the bit in g_cpu_irqset
* for this CPU was zero on entry into the interrupt handler,
* so if it is non-zero now then we know that was the case.
*/
if ((g_cpu_irqset & (1 << cpu)) == 0)
{
/* Wait until we can get the spinlock (meaning that we are
* no longer blocked by the critical section).
*/
spin_lock(&g_cpu_irqlock);
cpu_irqlock_set(cpu);
}
/* In any event, the nesting count is now one */
g_cpu_nestcount[cpu] = 1;
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock) &&
(g_cpu_irqset & (1 << cpu)) != 0);
}
}
else
{
/* Normal tasking environment.
*
* Get the TCB of the currently executing task on this CPU (avoid
* using this_task() which can recurse.
*/
cpu = this_cpu();
rtcb = current_task(cpu);
DEBUGASSERT(rtcb != NULL);
/* Do we already have interrupts disabled? */
if (rtcb->irqcount > 0)
{
/* Yes... make sure that the spinlock is set and increment the
* IRQ lock count.
*
* NOTE: If irqcount > 0 then (1) we are in a critical section,
* and (2) this CPU should hold the lock.
*/
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock) &&
(g_cpu_irqset & (1 << this_cpu())) != 0 &&
rtcb->irqcount < INT16_MAX);
rtcb->irqcount++;
}
else
{
/* If we get here with irqcount == 0, then we know that the
* current task running on this CPU is not in a critical
* section. However other tasks on other CPUs may be in a
* critical section. If so, we must wait until they release
* the spinlock.
*/
DEBUGASSERT((g_cpu_irqset & (1 << cpu)) == 0);
spin_lock(&g_cpu_irqlock);
/* Then set the lock count to 1.
*
* Interrupts disables must follow a stacked order. We
* cannot other context switches to re-order the enabling
* disabling of interrupts.
*
* The scheduler accomplishes this by treating the irqcount
* like lockcount: Both will disable pre-emption.
*/
cpu_irqlock_set(cpu);
rtcb->irqcount = 1;
/* Note that we have entered the critical section */
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
nxsched_critmon_csection(rtcb, true, return_address(0));
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
sched_note_csection(rtcb, true);
#endif
}
}
/* Return interrupt status */
return ret;
}
#else
irqstate_t enter_critical_section(void)
{
irqstate_t ret;
/* Disable interrupts */
ret = up_irq_save();
/* Check if we were called from an interrupt handler */
if (!up_interrupt_context())
{
FAR struct tcb_s *rtcb = this_task();
DEBUGASSERT(rtcb != NULL);
/* Have we just entered the critical section? Or is this a nested
* call to enter_critical_section.
*/
DEBUGASSERT(rtcb->irqcount >= 0 && rtcb->irqcount < INT16_MAX);
if (++rtcb->irqcount == 1)
{
/* Note that we have entered the critical section */
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
nxsched_critmon_csection(rtcb, true, return_address(0));
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
sched_note_csection(rtcb, true);
#endif
}
}
/* Return interrupt status */
return ret;
}
#endif
/****************************************************************************
* Name: leave_critical_section
*
* Description:
* Decrement the IRQ lock count and if it decrements to zero then release
* the spinlock.
*
****************************************************************************/
#ifdef CONFIG_SMP
void leave_critical_section(irqstate_t flags)
{
int cpu;
/* If called from an interrupt handler, then just release the
* spinlock. The interrupt handling logic should already hold the
* spinlock if enter_critical_section() has been called. Unlocking
* the spinlock will allow interrupt handlers on other CPUs to execute
* again.
*/
if (up_interrupt_context())
{
/* We are in an interrupt handler. Check if the last call to
* enter_critical_section() was nested.
*/
cpu = this_cpu();
if (g_cpu_nestcount[cpu] > 1)
{
/* Yes.. then just decrement the nesting count */
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock));
g_cpu_nestcount[cpu]--;
}
else
{
/* No, not nested. Restore the g_cpu_irqset for this CPU
* and release the spinlock (if necessary).
*/
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock) &&
g_cpu_nestcount[cpu] == 1);
FAR struct tcb_s *rtcb = current_task(cpu);
DEBUGASSERT(rtcb != NULL);
DEBUGASSERT((g_cpu_irqset & (1 << cpu)) != 0);
if (rtcb->irqcount <= 0)
{
cpu_irqlock_clear();
}
g_cpu_nestcount[cpu] = 0;
}
}
else
{
FAR struct tcb_s *rtcb;
/* Get the TCB of the currently executing task on this CPU (avoid
* using this_task() which can recurse.
*/
cpu = this_cpu();
rtcb = current_task(cpu);
DEBUGASSERT(rtcb != NULL && rtcb->irqcount > 0);
/* Normal tasking context. We need to coordinate with other
* tasks.
*
* Will we still have interrupts disabled after decrementing the
* count?
*/
if (rtcb->irqcount > 1)
{
/* Yes... the spinlock should remain set */
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock));
rtcb->irqcount--;
}
else
{
/* No.. Note that we have left the critical section */
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
nxsched_critmon_csection(rtcb, false, return_address(0));
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
sched_note_csection(rtcb, false);
#endif
/* Decrement our count on the lock. If all CPUs have
* released, then unlock the spinlock.
*/
DEBUGASSERT(spin_is_locked(&g_cpu_irqlock) &&
(g_cpu_irqset & (1 << cpu)) != 0);
/* Now, possibly on return from a context switch, clear our
* count on the lock. If all CPUs have released the lock,
* then unlock the global IRQ spinlock.
*/
rtcb->irqcount = 0;
cpu_irqlock_clear();
/* Have all CPUs released the lock? */
}
}
/* Restore the previous interrupt state which may still be interrupts
* disabled (but we don't have a mechanism to verify that now)
*/
up_irq_restore(flags);
}
#else
void leave_critical_section(irqstate_t flags)
{
/* Check if we were called from an interrupt handler and that the tasks
* lists have been initialized.
*/
if (!up_interrupt_context())
{
FAR struct tcb_s *rtcb = this_task();
DEBUGASSERT(rtcb != NULL);
/* Have we left entered the critical section? Or are we still
* nested.
*/
DEBUGASSERT(rtcb->irqcount > 0);
if (--rtcb->irqcount <= 0)
{
/* Note that we have left the critical section */
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
nxsched_critmon_csection(rtcb, false, return_address(0));
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
sched_note_csection(rtcb, false);
#endif
}
}
/* Restore the previous interrupt state. */
up_irq_restore(flags);
}
#endif
#endif /* CONFIG_IRQCOUNT */
Reference in New Issue View Git Blame Copy Permalink