sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0044910e33
nuttx/drivers/sensors/lis3dsh.c

588 lines
19 KiB
C
Raw Blame History

/****************************************************************************
* drivers/sensors/lis3dsh.c
* Character driver for the LIS3DSH 3-Axis acclerometer.
*
* Copyright (C) 2016 DS-Automotion GmbH. All rights reserved.
* Author: Alexander Entinger <a.entinger@ds-automotion.com>
* Thomas Ilk
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include <semaphore.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wqueue.h>
#include <nuttx/fs/fs.h>
#include <nuttx/sensors/lis3dsh.h>
#if defined(CONFIG_SPI) && defined(CONFIG_LIS3DSH)
/****************************************************************************
* Private
****************************************************************************/
struct lis3dsh_sensor_data_s
{
int16_t x_acc; /* Measurement result for x axis */
int16_t y_acc; /* Measurement result for y axis */
int16_t z_acc; /* Measurement result for z axis */
};
struct lis3dsh_dev_s
{
FAR struct lis3dsh_dev_s *flink; /* Supports a singly linked list of
* drivers */
FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */
FAR struct lis3dsh_config_s *config; /* Pointer to the configuration
* of the LIS3DSH sensor */
sem_t datasem; /* Manages exclusive access to this
* structure */
struct lis3dsh_sensor_data_s data; /* The data as measured by the sensor */
struct work_s work; /* The work queue is responsible for
* retrieving the data from the
* sensor after the arrival of new
* data was signalled in an interrupt */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr, uint8_t *reg_data);
static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr,
uint8_t const reg_data);
static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev);
static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev);
static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev,
uint16_t *x_acc, uint16_t *y_acc,
uint16_t *z_acc);
static int lis3dsh_interrupt_handler(int irq, FAR void *context);
static void lis3dsh_worker(FAR void *arg);
static int lis3dsh_open(FAR struct file *filep);
static int lis3dsh_close(FAR struct file *filep);
static ssize_t lis3dsh_read(FAR struct file *, FAR char *buffer,
size_t buflen);
static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int lis3dsh_ioctl(FAR struct file *filep, int cmd, unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_lis3dsh_fops =
{
lis3dsh_open,
lis3dsh_close,
lis3dsh_read,
lis3dsh_write,
NULL,
lis3dsh_ioctl
#ifndef CONFIG_DISABLE_POLL
, NULL
#endif
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL
#endif
};
/* Single linked list to store instances of drivers */
static struct lis3dsh_dev_s *g_lis3dsh_list = NULL;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: lis3dsh_read_register
****************************************************************************/
static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr, uint8_t * reg_data)
{
/* Lock the SPI bus so that only one device can access it at the same time */
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to read - the MSB needs
* to be set to indicate the read indication.
*/
SPI_SEND(dev->spi, reg_addr | 0x80);
/* Write an idle byte while receiving the required data */
*reg_data = (uint8_t) (SPI_SEND(dev->spi, 0));
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
/****************************************************************************
* Name: lis3dsh_write_register
****************************************************************************/
static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr,
uint8_t const reg_data)
{
/* Lock the SPI bus so that only one device can access it at the same time */
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to read */
SPI_SEND(dev->spi, reg_addr);
/* Transmit the content which should be written in the register */
SPI_SEND(dev->spi, reg_data);
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
/****************************************************************************
* Name: lis3dsh_reset
****************************************************************************/
static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev)
{
lis3dsh_write_register(dev, LIS3DSH_CTRL_REG_6, LIS3DSH_CTRL_REG_6_BOOT_bm);
up_mdelay(100);
}
/****************************************************************************
* Name: lis3dsh_read_measurement_data
****************************************************************************/
static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev)
{
uint16_t x_acc = 0;
uint16_t y_acc = 0;
uint16_t z_acc = 0;
int ret;
/* Read acclerometer data */
lis3dsh_read_acclerometer_data(dev, &x_acc, &y_acc, &z_acc);
/* Aquire the semaphore before the data is copied */
ret = sem_wait(&dev->datasem);
if (ret != OK)
{
snerr("Could not aquire dev->datasem: %d\n", ret);
return;
}
/* Copy retrieve data to internal data structure */
dev->data.x_acc = (int16_t)x_acc;
dev->data.y_acc = (int16_t)y_acc;
dev->data.z_acc = (int16_t)z_acc;
/* Give back the semaphore */
sem_post(&dev->datasem);
}
/****************************************************************************
* Name: lis3dsh_read_acclerometer_data
****************************************************************************/
static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev,
uint16_t * x_acc, uint16_t * y_acc,
uint16_t * z_acc)
{
/* Lock the SPI bus so that only one device can access it at the same time */
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to start reading 0x80 ->
* MSB is set -> Read Indication.
*/
SPI_SEND(dev->spi, (LIS3DSH_OUT_X_L_REG | 0x80));
/* RX */
*x_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*x_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
*y_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*y_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
*z_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*z_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
/****************************************************************************
* Name: lis3dsh_interrupt_handler
****************************************************************************/
static int lis3dsh_interrupt_handler(int irq, FAR void *context)
{
/* This function should be called upon a rising edge on the LIS3DSH new data
* interrupt pin since it signals that new data has been measured.
*/
FAR struct lis3dsh_dev_s *priv = NULL;
int ret;
/* Find out which device caused the interrupt */
for (priv = g_lis3dsh_list; priv && priv->config->irq != irq;
priv = priv->flink);
DEBUGASSERT(priv != NULL);
/* Task the worker with retrieving the latest sensor data. We should not do
* this in a interrupt since it might take too long. Also we cannot lock the
* SPI bus from within an interrupt.
*/
DEBUGASSERT(priv->work.worker == NULL);
ret = work_queue(HPWORK, &priv->work, lis3dsh_worker, priv, 0);
if (ret < 0)
{
snerr("Failed to queue work: %d\n", ret);
return ret;
}
return OK;
}
/****************************************************************************
* Name: lis3dsh_worker
****************************************************************************/
static void lis3dsh_worker(FAR void *arg)
{
FAR struct lis3dsh_dev_s *priv = (FAR struct lis3dsh_dev_s *)(arg);
DEBUGASSERT(priv != NULL);
/* Read out the latest sensor data */
lis3dsh_read_measurement_data(priv);
}
/****************************************************************************
* Name: lis3dsh_open
****************************************************************************/
static int lis3dsh_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
DEBUGASSERT(priv != NULL);
/* Perform a reset */
lis3dsh_reset(priv);
/* Enable - the full scale range (FS = +/- 16 g) */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_5, LIS3DSH_CTRL_REG_5_FSCALE_2_bm);
/* Enable - Auto increment of address when reading multiple bytes */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_6, LIS3DSH_CTRL_REG_6_ADD_INC_bm);
/* Enable - Measurement of X-, Y-, and Z-axis - Block data update for
* accelerating data This should prevent race conditions when reading sensor
* data - fastest output data rate (ODR = 1600 Hz) */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_4,
LIS3DSH_CTRL_REG_4_XEN_bm | LIS3DSH_CTRL_REG_4_YEN_bm |
LIS3DSH_CTRL_REG_4_ZEN_bm | LIS3DSH_CTRL_REG_4_BDU_bm |
LIS3DSH_CTRL_REG_4_ODR_3_bm | LIS3DSH_CTRL_REG_4_ODR_0_bm);
/* Enable - DRDY signal enable to INT 1 */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_3,
LIS3DSH_CTRL_REG_3_DR_EN_bm | LIS3DSH_CTRL_REG_3_IEA_bm |
LIS3DSH_CTRL_REG_3_IEL_bm | LIS3DSH_CTRL_REG_3_INT1_EN_bm);
/* Read back the content of all control registers for debug purposes */
{
uint8_t reg_content = 0;
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_1, &reg_content);
snerr("LIS3DSH_CTRL_REG_1 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_2, &reg_content);
snerr("LIS3DSH_CTRL_REG_2 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_3, &reg_content);
snerr("LIS3DSH_CTRL_REG_3 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_4, &reg_content);
snerr("LIS3DSH_CTRL_REG_4 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_5, &reg_content);
snerr("LIS3DSH_CTRL_REG_5 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_6, &reg_content);
snerr("LIS3DSH_CTRL_REG_6 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_STATUS_REG, &reg_content);
snerr("STATUS_REG = %04x\n", reg_content);
}
return OK;
}
/****************************************************************************
* Name: lis3dsh_close
****************************************************************************/
static int lis3dsh_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
DEBUGASSERT(priv != NULL);
/* Perform a reset */
lis3dsh_reset(priv);
return OK;
}
/****************************************************************************
* Name: lis3dsh_read
****************************************************************************/
static ssize_t lis3dsh_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
FAR struct lis3dsh_sensor_data_s *data;
int ret;
DEBUGASSERT(priv != NULL);
/* Check if enough memory was provided for the read call */
if (buflen < sizeof(FAR struct lis3dsh_sensor_data_s))
{
snerr("Not enough memory for reading out a sensor data sample\n");
return -ENOSYS;
}
/* Aquire the semaphore before the data is copied */
ret = sem_wait(&priv->datasem);
if (ret != OK)
{
snerr("Could not aquire priv->datasem: %d\n", ret);
return ERROR;
}
/* Copy the sensor data into the buffer */
data = (FAR struct lis3dsh_sensor_data_s *)buffer;
memset(data, 0, sizeof(FAR struct lis3dsh_sensor_data_s));
data->x_acc = priv->data.x_acc;
data->y_acc = priv->data.y_acc;
data->z_acc = priv->data.z_acc;
/* Give back the semaphore */
sem_post(&priv->datasem);
return sizeof(FAR struct lis3dsh_sensor_data_s);
}
/****************************************************************************
* Name: lis3dsh_write
****************************************************************************/
static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
return -ENOSYS;
}
/****************************************************************************
* Name: lis3dsh_ioctl
****************************************************************************/
static int lis3dsh_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
int ret = OK;
switch (cmd)
{
/* Command was not recognized */
default:
snerr("Unrecognized cmd: %d\n", cmd);
ret = -ENOTTY;
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lis3dsh_register
*
* Description:
* Register the LIS3DSH character device as 'devpath'
*
* Input Parameters:
* devpath - The full path to the driver to register. E.g., "/dev/acc0"
* spi - An instance of the SPI interface to use to communicate with
* LIS3DSH
* config - configuration for the LIS3DSH driver.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int lis3dsh_register(FAR const char *devpath, FAR struct spi_dev_s *spi,
FAR struct lis3dsh_config_s *config)
{
FAR struct lis3dsh_dev_s *priv;
int ret;
/* Sanity check */
DEBUGASSERT(spi != NULL);
DEBUGASSERT(config != NULL);
/* Initialize the LIS3DSH device structure */
priv = (FAR struct lis3dsh_dev_s *)kmm_malloc(sizeof(struct lis3dsh_dev_s));
if (priv == NULL)
{
snerr("Failed to allocate instance\n");
return -ENOMEM;
}
priv->spi = spi;
priv->config = config;
priv->work.worker = NULL;
sem_init(&priv->datasem, 0, 1); /* Initialize sensor data access
* semaphore */
/* Setup SPI frequency and mode */
SPI_SETFREQUENCY(spi, LIS3DSH_SPI_FREQUENCY);
SPI_SETMODE(spi, LIS3DSH_SPI_MODE);
/* Register the character driver */
ret = register_driver(devpath, &g_lis3dsh_fops, 0666, priv);
if (ret < 0)
{
snerr("Failed to register driver: %d\n", ret);
kmm_free(priv);
sem_destroy(&priv->datasem);
return -ENODEV;
}
/* Since we support multiple LIS3DSH devices, we will need to add this new
* instance to a list of device instances so that it can be found by the
* interrupt handler based on the received IRQ number.
*/
priv->flink = g_lis3dsh_list;
g_lis3dsh_list = priv;
/* Attach the interrupt handler */
ret = priv->config->attach(priv->config, &lis3dsh_interrupt_handler);
if (ret < 0)
{
snerr("Failed to attach interrupt\n");
return -ENODEV;
}
return OK;
}
#endif /* CONFIG_SPI && CONFIG_LIS3DSH */
Reference in New Issue View Git Blame Copy Permalink