| .. |
|
chip
|
Squashed commit of the following:
|
2018-06-20 08:18:32 -06:00 |
|
chip.h
|
Squashed commit of the following:
|
2018-06-20 08:18:32 -06:00 |
|
Kconfig
|
arch/arc/src: Remove all driver-specific logic to set the interrupt priority. There is no good reason to change the interrupt priority unless you just want to debug a difficult problem. OR is you want to use high priority interrupts. In that case the specific interrupt priorities will need to be set by board-specific logic.
|
2018-12-06 13:34:41 -06:00 |
|
lpc17_adc.c
|
Squashed commit of the following:
|
2018-07-06 09:15:57 -06:00 |
|
lpc17_adc.h
|
Squashed commit of the following:
|
2018-07-06 09:15:57 -06:00 |
|
lpc17_allocateheap.c
|
arch/: Fix an error found in build testing. The protoype of mpu_log2regionfloor() changed; an additional parameter was added. However, none of the calls to mpu_log2regionfloor() were updated to pass the new, additional parameter.
|
2018-08-24 16:40:37 -06:00 |
|
lpc17_can.c
|
arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example.
|
2018-06-28 15:44:42 -06:00 |
|
lpc17_can.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_clockconfig.c
|
|
|
|
lpc17_clockconfig.h
|
|
|
|
lpc17_clrpend.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
lpc17_clrpend.h
|
|
|
|
lpc17_dac.c
|
LPC11xx/LPC17xx: Convert *err() to either *info() or add ERROR:, depending on if an error is reported
|
2016-06-17 11:26:31 -06:00 |
|
lpc17_dac.h
|
|
|
|
lpc17_emacram.h
|
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
|
2018-07-04 14:10:40 -06:00 |
|
lpc17_emc.c
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
lpc17_emc.h
|
|
|
|
lpc17_ethernet.c
|
arch/arc/src: Remove all driver-specific logic to set the interrupt priority. There is no good reason to change the interrupt priority unless you just want to debug a difficult problem. OR is you want to use high priority interrupts. In that case the specific interrupt priorities will need to be set by board-specific logic.
|
2018-12-06 13:34:41 -06:00 |
|
lpc17_ethernet.h
|
|
|
|
lpc17_gpdma.c
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
lpc17_gpdma.h
|
Cosmetic fixes to comments, README, and other trivial corrections.
|
2017-12-25 10:45:47 -06:00 |
|
lpc17_gpio.c
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
|
lpc17_gpio.h
|
Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ
|
2016-07-22 14:18:30 -06:00 |
|
lpc17_gpiodbg.c
|
Centralize definitions associated with CONFIG_DEBUG_GPIO
|
2016-06-15 09:20:23 -06:00 |
|
lpc17_gpioint.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
lpc17_i2c.c
|
sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed.
|
2018-01-31 10:09:14 -06:00 |
|
lpc17_i2c.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_i2s.h
|
|
|
|
lpc17_idle.c
|
Rename board_led_off to board_autoled_off
|
2015-11-01 09:09:36 -06:00 |
|
lpc17_irq.c
|
In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.
|
2018-12-03 17:41:59 -06:00 |
|
lpc17_lcd.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_lcd.h
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
lpc17_lowputc.c
|
Merged in hg42/nuttx/lpc17-disable-FDR-2 (pull request #596)
|
2018-02-11 21:24:47 +00:00 |
|
lpc17_lowputc.h
|
|
|
|
lpc17_mcpwm.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
lpc17_mpuinit.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
lpc17_ohciram.h
|
Squashed commit of the following:
|
2018-07-01 08:38:05 -06:00 |
|
lpc17_progmem.c
|
Merged in ebsong/nuttx (pull request #722)
|
2018-09-21 03:18:38 +00:00 |
|
lpc17_progmem.h
|
arch/arm/src/lpc17xx: This commit adds a configurable option to allow using a part of LPC17xx's internal flash memory as a Memory Technology Device via NuttX' mtd_progmem infrastructure. Tested with LPC1769.
|
2018-05-01 14:49:16 -06:00 |
|
lpc17_pwm.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_pwm.h
|
|
|
|
lpc17_qei.h
|
|
|
|
lpc17_rit.h
|
|
|
|
lpc17_rtc.h
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
lpc17_sdcard.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_sdcard.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_serial.c
|
Squashed commit of the following:
|
2018-07-06 09:15:57 -06:00 |
|
lpc17_serial.h
|
|
|
|
lpc17_spi.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_spi.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_ssp.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_ssp.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_start.c
|
Squashed commit of the following:
|
2018-06-20 08:18:32 -06:00 |
|
lpc17_start.h
|
Squashed commit of the following:
|
2018-06-20 08:18:32 -06:00 |
|
lpc17_timer.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
lpc17_timer.h
|
|
|
|
lpc17_timerisr.c
|
Squashed commit of the following:
|
2018-11-19 10:47:28 -06:00 |
|
lpc17_usbdev.c
|
arch/arm/src/lpc17xx/lpc17_usbdev: Fix typo introduced with last change
|
2018-05-21 06:13:30 -06:00 |
|
lpc17_usbhost.c
|
drivers/usbhost/usbhost_max3421e.c: Fix an error in reading the pending interrupts. Aos fix a number of typos and update a README.
|
2018-07-29 15:06:44 -06:00 |
|
lpc17_usbhost.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
|
lpc17_userspace.c
|
Correct some spacing issues
|
2015-10-07 11:39:06 -06:00 |
|
lpc17_userspace.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
lpc17_wdt.h
|
|
|
|
lpc176x_clockconfig.c
|
Correct some spacing issues
|
2015-10-07 11:39:06 -06:00 |
|
lpc176x_gpio.c
|
Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ
|
2016-07-22 14:18:30 -06:00 |
|
lpc176x_gpio.h
|
|
|
|
lpc176x_rtc.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
lpc178x_clockconfig.c
|
|
|
|
lpc178x_gpio.c
|
Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ
|
2016-07-22 14:18:30 -06:00 |
|
lpc178x_gpio.h
|
|
|
|
Make.defs
|
arch/arm/src/armv7-m/up_trigger_irq.c: Add logic to trigger ARMv7-M interrupts and exceptions.
|
2018-08-25 10:23:21 -06:00 |
