nuttx

History

Gregory Nutt 68a97a53ac Make some file section headers more consistent with standard		2015-04-08 09:15:17 -06:00
..
include	Add support for the Olimex STM32 h405. From Martin Lederhilger	2014-06-03 10:34:36 -06:00
nshusb	Rename adc_devinit() to board_adc_setup(). Add support to the boardctl() interface so that it can call board_adc_setup() on behalf of an application. Change apps/examples/adc to that is now calls boardctl() instead of adc_devinit() in order to initalize the ADC device.	2015-03-31 15:00:23 -06:00
scripts	Add support for the Olimex STM32 h405. From Martin Lederhilger	2014-06-03 10:34:36 -06:00
src	Make some file section headers more consistent with standard	2015-04-08 09:15:17 -06:00
Kconfig	Add support for the Olimex STM32 h405. From Martin Lederhilger	2014-06-03 10:34:36 -06:00
README.txt	Add support for the Olimex STM32 h405. From Martin Lederhilger	2014-06-03 10:34:36 -06:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the sytem status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.