sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0356d1403d
nuttx/wireless/ieee802154/mac802154.c
chao an 01eb4d586b mm/iob: iob members are initialized after allocate 
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-16 09:51:53 +08:00

2162 lines
68 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/****************************************************************************
* wireless/ieee802154/mac802154.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wqueue.h>
#include <nuttx/mm/iob.h>
#include "mac802154.h"
#include "mac802154_internal.h"
#include "mac802154_assoc.h"
#include "mac802154_scan.h"
#include "mac802154_data.h"
#include "mac802154_poll.h"
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include <nuttx/wireless/ieee802154/ieee802154_radio.h>
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Data structure pools and allocation helpers */
static void mac802154_resetqueues(FAR struct ieee802154_privmac_s *priv);
/* IEEE 802.15.4 PHY Interface OPs */
static int
mac802154_radiopoll(FAR const struct ieee802154_radiocb_s *radiocb,
bool gts, FAR struct ieee802154_txdesc_s **tx_desc);
static void mac802154_txdone(FAR const struct ieee802154_radiocb_s *radiocb,
FAR struct ieee802154_txdesc_s *tx_desc);
static void mac802154_txdone_worker(FAR void *arg);
static void mac802154_rxframe(FAR const struct ieee802154_radiocb_s *radiocb,
FAR struct ieee802154_data_ind_s *ind);
static void mac802154_rxframe_worker(FAR void *arg);
static void
mac802154_edresult(FAR const struct ieee802154_radiocb_s *radiocb,
uint8_t edval);
static void mac802154_sfevent(FAR const struct ieee802154_radiocb_s *radiocb,
enum ieee802154_sfevent_e sfevent);
static void mac802154_purge_worker(FAR void *arg);
static void mac802154_rxdatareq(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind);
static void mac802154_rxdataframe(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind);
static void mac802154_rxbeaconframe(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind);
static void mac802154_notify_worker(FAR void *arg);
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154_resetqueues
*
* Description:
* Initializes the various queues used in the MAC layer. Called on creation
* of MAC.
*
****************************************************************************/
static void mac802154_resetqueues(FAR struct ieee802154_privmac_s *priv)
{
int i;
sq_init(&priv->txdone_queue);
sq_init(&priv->csma_queue);
sq_init(&priv->gts_queue);
sq_init(&priv->indirect_queue);
sq_init(&priv->dataind_queue);
sq_init(&priv->primitive_queue);
/* Initialize the tx descriptor allocation pool */
sq_init(&priv->txdesc_queue);
for (i = 0; i < CONFIG_MAC802154_NTXDESC; i++)
{
sq_addlast((FAR sq_entry_t *)&priv->txdesc_pool[i],
&priv->txdesc_queue);
}
nxsem_init(&priv->txdesc_sem, 0, CONFIG_MAC802154_NTXDESC);
}
/****************************************************************************
* Name: mac802154_txdesc_pool
*
* Description:
* This function allocates a tx descriptor and the dependent primitive
* (data confirmation) from the free list. The primitive and tx descriptor
* must be freed separately.
*
* Assumptions:
* priv MAC struct is locked when calling.
*
* Notes:
* If any of the semaphore waits inside this function get interrupted, the
* function will release the MAC layer. If this function returns -EINTR,
* the calling code should NOT release the MAC semaphore.
*
****************************************************************************/
int mac802154_txdesc_alloc(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_txdesc_s **txdesc)
{
int ret;
FAR struct ieee802154_primitive_s *primitive;
/* Try and take a count from the semaphore. If this succeeds, we have
* "reserved" the structure, but still need to unlink it from the free
* list. The MAC is already locked, so there shouldn't be any other
* conflicting calls.
*/
ret = nxsem_trywait(&priv->txdesc_sem);
if (ret == OK)
{
*txdesc =
(FAR struct ieee802154_txdesc_s *)sq_remfirst(&priv->txdesc_queue);
}
else
{
/* Unlock MAC so that other work can be done to free a notification */
nxmutex_unlock(&priv->lock);
/* Take a count from the tx desc semaphore, waiting if necessary. We
* only return from here with an error if we are allowing interruptions
* and we received a signal.
*/
ret = nxsem_wait_uninterruptible(&priv->txdesc_sem);
if (ret < 0)
{
/* MAC is already released */
wlwarn("WARNING: nxsem_wait_uninterruptible failed: %d\n", ret);
return ret;
}
/* If we've taken a count from the semaphore, we have "reserved" the
* struct but now we need to pop it off of the free list. We need to
* re-lock the MAC in order to ensure this happens correctly.
*/
ret = nxmutex_lock(&priv->lock);
if (ret < 0)
{
wlwarn("WARNING: nxmutex_lock failed: %d\n", ret);
nxsem_post(&priv->txdesc_sem);
return ret;
}
/* We can now safely unlink the next structure from the free list */
*txdesc =
(FAR struct ieee802154_txdesc_s *)sq_remfirst(&priv->txdesc_queue);
}
/* We have now successfully allocated the tx descriptor. Now we need to
* allocate the primitive for the data confirmation that gets passed along
* with the tx descriptor. These are allocated together, but not freed
* together.
*/
primitive = ieee802154_primitive_allocate();
(*txdesc)->purgetime = 0;
(*txdesc)->retrycount = priv->maxretries;
(*txdesc)->conf = &primitive->u.dataconf;
return OK;
}
/****************************************************************************
* Name: mac802154_createdatareq
*
* Description:
* Internal function used by various parts of the MAC layer. This function
* allocates an IOB, populates the frame according to input args, and
* links the IOB into the provided tx descriptor.
*
* Assumptions:
* Called with the MAC locked
*
****************************************************************************/
void mac802154_createdatareq(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_addr_s *coordaddr,
enum ieee802154_addrmode_e srcmode,
FAR struct ieee802154_txdesc_s *txdesc)
{
FAR struct iob_s *iob;
/* The only node allowed to use a source address of none is the PAN
* Coordinator. PAN coordinators should not be sending data request
* commands.
*/
DEBUGASSERT(srcmode != IEEE802154_ADDRMODE_NONE);
/* Allocate an IOB to put the frame in */
iob = iob_alloc(false);
DEBUGASSERT(iob != NULL);
/* Set the frame control fields */
iob->io_data[0] = 0;
iob->io_data[1] = 0;
IEEE802154_SETACKREQ(iob->io_data, 0);
IEEE802154_SETFTYPE(iob->io_data, 0, IEEE802154_FRAME_COMMAND);
IEEE802154_SETDADDRMODE(iob->io_data, 0, coordaddr->mode);
IEEE802154_SETSADDRMODE(iob->io_data, 0, srcmode);
iob->io_len = 2;
/* Each time a data or a MAC command frame is generated, the MAC sublayer
* shall copy the value of macDSN into the Sequence Number field of the
* MHR of the outgoing frame and then increment it by one. [1] pg. 40.
*/
iob->io_data[iob->io_len++] = priv->dsn++;
/* If the destination address is present, copy the PAN ID and one of the
* addresses, depending on mode, into the MHR.
*/
if (coordaddr->mode != IEEE802154_ADDRMODE_NONE)
{
mac802154_putpanid(iob, coordaddr->panid);
if (coordaddr->mode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_putsaddr(iob, coordaddr->saddr);
}
else if (coordaddr->mode == IEEE802154_ADDRMODE_EXTENDED)
{
mac802154_puteaddr(iob, coordaddr->eaddr);
}
}
/* If the Destination Addressing Mode field is set to indicate that
* destination addressing information is not present, the PAN ID
* Compression field shall be set to zero and the source PAN identifier
* shall contain the value of macPANId. Otherwise, the PAN ID Compression
* field shall be set to one. In this case and in accordance with the PAN
* ID Compression field, the Destination PAN Identifier field shall
* contain the value of macPANId, while the Source PAN Identifier field
* shall be omitted. [1] pg. 72
*/
if (coordaddr->mode != IEEE802154_ADDRMODE_NONE &&
IEEE802154_PANIDCMP(coordaddr->panid, priv->addr.panid))
{
IEEE802154_SETPANIDCOMP(iob->io_data, 0);
}
else
{
mac802154_putpanid(iob, priv->addr.panid);
}
if (srcmode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_putsaddr(iob, priv->addr.saddr);
}
else if (srcmode == IEEE802154_ADDRMODE_EXTENDED)
{
mac802154_puteaddr(iob, priv->addr.eaddr);
}
/* Copy in the Command Frame Identifier */
iob->io_data[iob->io_len++] = IEEE802154_CMD_DATA_REQ;
/* Copy the IOB reference to the descriptor */
txdesc->frame = iob;
txdesc->frametype = IEEE802154_FRAME_COMMAND;
txdesc->ackreq = true;
/* Save a copy of the destination addressing information into the tx
* descriptor. We only do this for commands to help with handling their
* progession.
*/
memcpy(&txdesc->destaddr, coordaddr, sizeof(struct ieee802154_addr_s));
/* Save a reference of the tx descriptor */
priv->cmd_desc = txdesc;
}
/****************************************************************************
* Name: mac802154_notify
*
* Description:
* Queue the primitive in the queue and queue work on the LPWORK
* queue if is not already scheduled.
*
* Assumptions:
* Called with the MAC locked
*
****************************************************************************/
void mac802154_notify(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_primitive_s *primitive)
{
sq_addlast((FAR sq_entry_t *)primitive, &priv->primitive_queue);
if (work_available(&priv->notifwork))
{
work_queue(LPWORK, &priv->notifwork, mac802154_notify_worker,
(FAR void *)priv, 0);
}
}
/****************************************************************************
* Name: mac802154_notify_worker
*
* Description:
* Pop each primitive off the queue and call the registered
* callbacks. There is special logic for handling ieee802154_data_ind_s.
*
****************************************************************************/
static void mac802154_notify_worker(FAR void *arg)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)arg;
FAR struct mac802154_maccb_s *cb;
FAR struct ieee802154_primitive_s *primitive;
int ret;
nxmutex_lock(&priv->lock);
primitive =
(FAR struct ieee802154_primitive_s *)sq_remfirst(&priv->primitive_queue);
nxmutex_unlock(&priv->lock);
while (primitive != NULL)
{
/* Data indications are a special case since the frame can only be
* passed to one place. The return value of the notify call is used to
* accept or reject the primitive. In the case of the data indication,
* there can only be one accept. Callbacks are stored in order of
* there receiver priority ordered when the callbacks are bound in
* mac802154_bind().
*/
if (primitive->type == IEEE802154_PRIMITIVE_IND_DATA)
{
bool dispose = true;
primitive->nclients = 1;
for (cb = priv->cb; cb != NULL; cb = cb->flink)
{
if (cb->notify != NULL)
{
ret = cb->notify(cb, primitive);
if (ret >= 0)
{
/* The receiver accepted and disposed of the frame and
* it's meta-data. We are done.
*/
dispose = false;
break;
}
}
}
if (dispose)
{
iob_free(primitive->u.dataind.frame);
ieee802154_primitive_free(primitive);
}
}
else
{
/* Set the number of clients count so that the primitive resources
* will be preserved until all clients are finished with it.
*/
primitive->nclients = priv->nclients;
/* Try to notify every registered MAC client */
for (cb = priv->cb; cb != NULL; cb = cb->flink)
{
if (cb->notify != NULL)
{
ret = cb->notify(cb, primitive);
if (ret < 0)
{
ieee802154_primitive_free(primitive);
}
}
else
{
ieee802154_primitive_free(primitive);
}
}
}
/* Get the next primitive then loop */
nxmutex_lock(&priv->lock);
primitive = (FAR struct ieee802154_primitive_s *)
sq_remfirst(&priv->primitive_queue);
nxmutex_unlock(&priv->lock);
}
}
/****************************************************************************
* Name: mac802154_updatebeacon
*
* Description:
* This function is called in the following scenarios:
* - The MAC receives a START.request primitive
* - Upon receiving the IEEE802154_SFEVENT_ENDOFACTIVE event from the
* this radio layer, the MAC checks the bf_update flag and if set
* calls function. The bf_update flag is set when various attributes
* that effect the beacon are updated.
*
* Internal function used by various parts of the MAC layer. This function
* uses the various MAC attributes to update the beacon frame. It loads
* the inactive beacon frame structure and then notifies the radio layer
* new frame. the provided tx descriptor in the indirect list and manages
* of the the scheduling for purging the transaction if it does not get
* extracted in time.
*
* Assumptions:
* Called with the MAC locked
*
****************************************************************************/
void mac802154_updatebeacon(FAR struct ieee802154_privmac_s *priv)
{
FAR struct ieee802154_txdesc_s *txdesc;
FAR struct ieee802154_beaconframe_s *beacon;
uint8_t pendaddrspec_ind;
uint8_t pendeaddr = 0;
uint8_t pendsaddr = 0;
/* Switch the buffer */
priv->bf_ind = !priv->bf_ind;
/* Get a local reference to the beacon frame */
beacon = &priv->beaconframe[priv->bf_ind];
/* Clear the frame control fields */
beacon->bf_data[0] = 0;
beacon->bf_data[1] = 0;
beacon->bf_len = 2;
IEEE802154_SETFTYPE(beacon->bf_data, 0, IEEE802154_FRAME_BEACON);
/* Check if there is a broadcast message pending, if there is, we must set
* the frame pending bit to 1.
*/
/* TODO: handle broadcast frame */
DEBUGASSERT(priv->addr.mode != IEEE802154_ADDRMODE_NONE);
IEEE802154_SETDADDRMODE(beacon->bf_data, 0, IEEE802154_ADDRMODE_NONE);
IEEE802154_SETSADDRMODE(beacon->bf_data, 0, priv->addr.mode);
IEEE802154_SETVERSION(beacon->bf_data, 0, 1);
/* The beacon sequence number has to be taken care of by the radio layer,
* since we only want to update the whole frame when more changes than
* just the bsn.
*/
beacon->bf_len++;
IEEE802154_PANIDCOPY(&beacon->bf_data[beacon->bf_len], priv->addr.panid);
beacon->bf_len += IEEE802154_PANIDSIZE;
if (priv->addr.mode == IEEE802154_ADDRMODE_SHORT)
{
IEEE802154_SADDRCOPY(&beacon->bf_data[beacon->bf_len],
priv->addr.saddr);
beacon->bf_len += IEEE802154_SADDRSIZE;
}
else
{
IEEE802154_EADDRCOPY(&beacon->bf_data[beacon->bf_len],
priv->addr.eaddr);
beacon->bf_len += IEEE802154_EADDRSIZE;
}
/* Clear the superframe specification, then set the appropriate bits */
beacon->bf_data[beacon->bf_len] = 0;
beacon->bf_data[beacon->bf_len + 1] = 0;
IEEE802154_SETBEACONORDER(beacon->bf_data, beacon->bf_len,
priv->sfspec.beaconorder);
IEEE802154_SETSFORDER(beacon->bf_data, beacon->bf_len,
priv->sfspec.sforder);
IEEE802154_SETFINCAPSLOT(beacon->bf_data, beacon->bf_len,
priv->sfspec.final_capslot);
if (priv->sfspec.ble)
{
IEEE802154_SETBLE(beacon->bf_data, beacon->bf_len);
}
if (priv->sfspec.pancoord)
{
IEEE802154_SETPANCOORD(beacon->bf_data, beacon->bf_len);
}
if (priv->sfspec.assocpermit)
{
IEEE802154_SETASSOCPERMIT(beacon->bf_data, beacon->bf_len);
}
beacon->bf_len += 2;
/* TODO: Handle GTS properly, for now, we just set the descriptor count to
* zero and specify that we do not permit GTS requests.
*/
beacon->bf_data[beacon->bf_len++] = 0;
/* TODO: Add GTS List here */
/* Skip the pending address specification field for now */
pendaddrspec_ind = beacon->bf_len++;
txdesc = (FAR struct ieee802154_txdesc_s *)
sq_peek(&priv->indirect_queue);
while (txdesc != NULL)
{
if (txdesc->destaddr.mode == IEEE802154_ADDRMODE_SHORT)
{
pendsaddr++;
IEEE802154_SADDRCOPY(&beacon->bf_data[beacon->bf_len],
txdesc->destaddr.saddr);
beacon->bf_len += IEEE802154_SADDRSIZE;
}
else if (txdesc->destaddr.mode == IEEE802154_ADDRMODE_EXTENDED)
{
pendeaddr++;
IEEE802154_EADDRCOPY(&beacon->bf_data[beacon->bf_len],
txdesc->destaddr.eaddr);
beacon->bf_len += IEEE802154_EADDRSIZE;
}
/* Check if we are up to 7 addresses yet */
if ((pendsaddr + pendeaddr) == 7)
{
break;
}
/* Get the next pending indirect transaction */
txdesc = (FAR struct ieee802154_txdesc_s *)
sq_next((FAR sq_entry_t *)txdesc);
}
/* At this point, we know how many of each transaction we have, we can
* setup the Pending Address Specification field
*/
beacon->bf_data[pendaddrspec_ind] =
(pendsaddr & 0x07) | ((pendeaddr << 4) & 0x70);
/* Copy in the beacon payload */
memcpy(&beacon->bf_data[beacon->bf_len], priv->beaconpayload,
priv->beaconpayloadlength);
beacon->bf_len += priv->beaconpayloadlength;
priv->beaconupdate = false;
}
/****************************************************************************
* Name: mac802154_setupindirect
*
* Description:
* Internal function used by various parts of the MAC layer. This function
* places the provided tx descriptor in the indirect list and manages the
* scheduling for purging the transaction if it does not get extracted in
* time.
*
* Assumptions:
* Called with the MAC locked
*
****************************************************************************/
void mac802154_setupindirect(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_txdesc_s *txdesc)
{
uint32_t ticks;
uint32_t symbols;
/* Link the tx descriptor into the list */
sq_addlast((FAR sq_entry_t *)txdesc, &priv->indirect_queue);
/* Update the timestamp for purging the transaction */
/* The maximum time (in unit periods) that a transaction is stored by a
* coordinator and indicated in its beacon. The unit period is governed
* by macBeaconOrder, BO, as follows: For 0 ≤ BO ≤ 14, the unit period
* will be aBaseSuperframeDuration × 2 BO . For BO = 15, the unit period
* will be aBaseSuperframeDuration. [1] pg. 129
*/
if (priv->sfspec.beaconorder < 15)
{
symbols = priv->trans_persisttime *
(IEEE802154_BASE_SUPERFRAME_DURATION *
(1 << priv->sfspec.beaconorder));
}
else
{
symbols = priv->trans_persisttime *
IEEE802154_BASE_SUPERFRAME_DURATION;
}
ticks = mac802154_symtoticks(priv, symbols);
txdesc->purgetime = clock_systime_ticks() + ticks;
/* Make sure the beacon gets updated */
if (priv->sfspec.beaconorder < 15)
{
priv->beaconupdate = true;
}
/* Check to see if the purge indirect timer is scheduled. If it is, when
* the timer fires, it will schedule the next purge timer event.
* Inherently, the queue will be in order of which transaction needs to
* be purged next.
*
* If the purge indirect timer has not been scheduled, schedule it for when
* this transaction should expire.
*/
if (work_available(&priv->purge_work))
{
work_queue(HPWORK, &priv->purge_work, mac802154_purge_worker,
(FAR void *)priv, ticks);
}
}
/****************************************************************************
* Name: mac802154_purge_worker
*
* Description:
* Worker function scheduled in order to purge expired indirect
* transactions. The first element in the list should always be removed.
* The list is searched and transactions are removed until a transaction
* has not yet expired. Then if there are any remaining transactions, the
* work function is rescheduled for the next expiring transaction.
*
****************************************************************************/
static void mac802154_purge_worker(FAR void *arg)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)arg;
FAR struct ieee802154_txdesc_s *txdesc;
/* Get exclusive access to the driver structure. We don't care about any
* signals so don't allow interruptions
*/
nxmutex_lock(&priv->lock);
while (1)
{
/* Pop transactions off indirect queue until the transaction timeout
* has not passed.
*/
txdesc = (FAR struct ieee802154_txdesc_s *)
sq_peek(&priv->indirect_queue);
if (txdesc == NULL)
{
break;
}
/* Should probably check a little ahead and remove the transaction if
* it is within a certain number of clock ticks away. There is no
* since in scheduling the timer to expire in only a few ticks.
*/
if (clock_systime_ticks() >= txdesc->purgetime)
{
/* Unlink the transaction */
sq_remfirst(&priv->indirect_queue);
/* Free the IOB, the notification, and the tx descriptor */
iob_free(txdesc->frame);
ieee802154_primitive_free((FAR struct ieee802154_primitive_s *)
txdesc->conf);
mac802154_txdesc_free(priv, txdesc);
priv->beaconupdate = true;
wlinfo("Indirect TX purged");
}
else
{
/* Reschedule the transaction for the next timeout */
work_queue(HPWORK, &priv->purge_work, mac802154_purge_worker,
priv, txdesc->purgetime - clock_systime_ticks());
break;
}
}
nxmutex_unlock(&priv->lock);
}
/****************************************************************************
* Name: mac802154_radiopoll
*
* Description:
* Called from the radio driver through the callback struct. This
* function is called when the radio has room for another transaction. If
* the MAC layer has a transaction, it copies it into the supplied buffer
* and returns the length. A descriptor is also populated with the
* transaction.
*
****************************************************************************/
static int
mac802154_radiopoll(FAR const struct ieee802154_radiocb_s *radiocb,
bool gts, FAR struct ieee802154_txdesc_s **txdesc)
{
FAR struct mac802154_radiocb_s *cb =
(FAR struct mac802154_radiocb_s *)radiocb;
FAR struct ieee802154_privmac_s *priv;
DEBUGASSERT(cb != NULL && cb->priv != NULL);
priv = cb->priv;
/* Get exclusive access to the driver structure. Ignore EINTR signals */
nxmutex_lock(&priv->lock);
if (gts)
{
/* Check to see if there are any GTS transactions waiting */
*txdesc = (FAR struct ieee802154_txdesc_s *)
sq_remfirst(&priv->gts_queue);
}
else
{
/* Check to see if there are any CSMA transactions waiting */
*txdesc = (FAR struct ieee802154_txdesc_s *)
sq_remfirst(&priv->csma_queue);
}
nxmutex_unlock(&priv->lock);
if (*txdesc != NULL)
{
return (*txdesc)->frame->io_len;
}
return 0;
}
/****************************************************************************
* Name: mac802154_txdone
*
* Description:
* Called from the radio driver through the callback struct. This
* function is called when the radio has completed a transaction. The
* txdesc passed gives provides information about the completed
* transaction including the original handle provided when the transaction
* was created and the status of the transaction. This function copies
* the descriptor and schedules work to handle the transaction without
* blocking the radio.
*
****************************************************************************/
static void mac802154_txdone(FAR const struct ieee802154_radiocb_s *radiocb,
FAR struct ieee802154_txdesc_s *txdesc)
{
FAR struct mac802154_radiocb_s *cb =
(FAR struct mac802154_radiocb_s *)radiocb;
FAR struct ieee802154_privmac_s *priv;
DEBUGASSERT(cb != NULL && cb->priv != NULL);
priv = cb->priv;
/* Get exclusive access to the driver structure. We don't care about any
* signals so don't allow interruptions
*/
nxmutex_lock(&priv->lock);
sq_addlast((FAR sq_entry_t *)txdesc, &priv->txdone_queue);
nxmutex_unlock(&priv->lock);
/* Schedule work with the work queue to process the completion further */
if (work_available(&priv->txdone_work))
{
work_queue(HPWORK, &priv->txdone_work, mac802154_txdone_worker,
(FAR void *)priv, 0);
}
}
/****************************************************************************
* Name: mac802154_txdone_worker
*
* Description:
* Worker function scheduled from mac802154_txdone. This function pops any
* TX descriptors off of the list and calls the next highest layer callback
* to inform the layer of the completed transaction and the status of it.
*
****************************************************************************/
static void mac802154_txdone_worker(FAR void *arg)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)arg;
FAR struct ieee802154_txdesc_s *txdesc;
FAR struct ieee802154_primitive_s *primitive;
/* Get exclusive access to the driver structure. We don't care about any
* signals so don't allow interruptions
*/
nxmutex_lock(&priv->lock);
while (1)
{
txdesc = (FAR struct ieee802154_txdesc_s *)
sq_remfirst(&priv->txdone_queue);
if (txdesc == NULL)
{
break;
}
/* Cast the data_conf to a notification. We get both the private and
* public notification structure to make it easier to use.
*/
primitive = (FAR struct ieee802154_primitive_s *)txdesc->conf;
wlinfo("Tx status: %s\n",
IEEE802154_STATUS_STRING[txdesc->conf->status]);
switch (txdesc->frametype)
{
case IEEE802154_FRAME_DATA:
{
primitive->type = IEEE802154_PRIMITIVE_CONF_DATA;
mac802154_notify(priv, primitive);
}
break;
case IEEE802154_FRAME_COMMAND:
{
switch (priv->curr_cmd)
{
case IEEE802154_CMD_ASSOC_REQ:
mac802154_txdone_assocreq(priv, txdesc);
break;
case IEEE802154_CMD_ASSOC_RESP:
break;
case IEEE802154_CMD_DISASSOC_NOT:
break;
case IEEE802154_CMD_DATA_REQ:
/* Data requests can be sent for 3 different reasons.
*
* 1. On a beacon-enabled PAN, this command shall be sent
* by a device when macAutoRequest is equal to TRUE
* and a beacon frame indicating that data are pending
* for that device is received from its coordinator.
* 2. when instructed to do so by the next higher layer
* on reception of the MLME-POLL.request primitive.
* 3. a device may send this command to the coordinator
* macResponseWaitTime after the acknowledgment to an
* association request command.
*/
switch (priv->curr_op)
{
case MAC802154_OP_ASSOC:
mac802154_txdone_datareq_assoc(priv, txdesc);
break;
case MAC802154_OP_POLL:
mac802154_txdone_datareq_poll(priv, txdesc);
break;
default:
break;
}
break;
case IEEE802154_CMD_PANID_CONF_NOT:
break;
case IEEE802154_CMD_ORPHAN_NOT:
break;
case IEEE802154_CMD_BEACON_REQ:
break;
case IEEE802154_CMD_COORD_REALIGN:
break;
case IEEE802154_CMD_GTS_REQ:
break;
default:
ieee802154_primitive_free(primitive);
break;
}
}
break;
default:
{
ieee802154_primitive_free(primitive);
}
break;
}
/* Free the IOB and the tx descriptor */
iob_free(txdesc->frame);
mac802154_txdesc_free(priv, txdesc);
}
nxmutex_unlock(&priv->lock);
}
/****************************************************************************
* Name: mac802154_rxframe
*
* Description:
* Called from the radio driver through the callback struct. This
* function is called when the radio has received a frame. The frame is
* passed in an iob, so that we can free it when we are done processing.
* A pointer to the RX descriptor is passed along with the iob, but it
* must be copied here as it is allocated directly on the caller's stack.
* We simply link the frame, copy the RX descriptor, and schedule a worker
* to process the frame later so that we do not hold up the radio.
*
****************************************************************************/
static void mac802154_rxframe(FAR const struct ieee802154_radiocb_s *radiocb,
FAR struct ieee802154_data_ind_s *ind)
{
FAR struct mac802154_radiocb_s *cb =
(FAR struct mac802154_radiocb_s *)radiocb;
FAR struct ieee802154_privmac_s *priv;
DEBUGASSERT(cb != NULL && cb->priv != NULL);
priv = cb->priv;
/* Get exclusive access to the driver structure. We don't care about any
* signals so if we see one, just go back to trying to get access again.
*/
nxmutex_lock(&priv->lock);
/* Push the iob onto the tail of the frame list for processing */
sq_addlast((FAR sq_entry_t *)ind, &priv->dataind_queue);
wlinfo("Frame received\n");
nxmutex_unlock(&priv->lock);
/* Schedule work with the work queue to process the completion further */
if (work_available(&priv->rx_work))
{
work_queue(HPWORK, &priv->rx_work, mac802154_rxframe_worker,
(FAR void *)priv, 0);
}
}
/****************************************************************************
* Name: mac802154_rxframe_worker
*
* Description:
* Worker function scheduled from mac802154_rxframe. This function
* processes any frames in the list. Frames intended to be consumed by
* the MAC layer will not produce any callbacks to the next highest layer.
* Frames intended for the application layer will be forwarded to them.
*
****************************************************************************/
static void mac802154_rxframe_worker(FAR void *arg)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)arg;
FAR struct ieee802154_data_ind_s *ind;
FAR struct iob_s *iob;
uint16_t *frame_ctrl;
bool panid_comp;
uint8_t ftype;
while (1)
{
/* Get exclusive access to the driver structure. We don't care about
* any signals so if we see one, just go back to trying to get access
* again.
*/
nxmutex_lock(&priv->lock);
/* Pop the data indication from the head of the frame list for
* processing. Note: dataind_queue contains ieee802154_primitive_s
* which is safe to cast directly to a data indication.
*/
ind = (FAR struct ieee802154_data_ind_s *)
sq_remfirst(&priv->dataind_queue);
/* Once we pop off the indication, we needn't to keep the mac locked */
nxmutex_unlock(&priv->lock);
if (ind == NULL)
{
return;
}
/* Get a local copy of the frame to make it easier to access */
iob = ind->frame;
/* Set a local pointer to the frame control then move the offset past
* the frame control field
*/
frame_ctrl = (uint16_t *)&iob->io_data[iob->io_offset];
iob->io_offset += 2;
/* We use the data_ind_s as a container for the frame information even
* if this isn't a data frame
*/
ind->src.mode = (*frame_ctrl & IEEE802154_FRAMECTRL_SADDR) >>
IEEE802154_FRAMECTRL_SHIFT_SADDR;
ind->dest.mode = (*frame_ctrl & IEEE802154_FRAMECTRL_DADDR) >>
IEEE802154_FRAMECTRL_SHIFT_DADDR;
panid_comp = (*frame_ctrl & IEEE802154_FRAMECTRL_PANIDCOMP) >>
IEEE802154_FRAMECTRL_SHIFT_PANIDCOMP;
ind->dsn = iob->io_data[iob->io_offset++];
/* If the destination address is included */
if (ind->dest.mode != IEEE802154_ADDRMODE_NONE)
{
/* Get the destination PAN ID */
mac802154_takepanid(iob, ind->dest.panid);
if (ind->dest.mode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_takesaddr(iob, ind->dest.saddr);
}
else if (ind->dest.mode == IEEE802154_ADDRMODE_EXTENDED)
{
mac802154_takeeaddr(iob, ind->dest.eaddr);
}
}
if (ind->src.mode != IEEE802154_ADDRMODE_NONE)
{
/* If the source address is included, and the PAN ID compression
* field is set, get the PAN ID from the header.
*/
if (panid_comp)
{
/* The source PAN ID is equal to the destination PAN ID */
IEEE802154_PANIDCOPY(ind->src.panid, ind->dest.panid);
}
else
{
mac802154_takepanid(iob, ind->src.panid);
}
if (ind->src.mode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_takesaddr(iob, ind->src.saddr);
}
else if (ind->src.mode == IEEE802154_ADDRMODE_EXTENDED)
{
mac802154_takeeaddr(iob, ind->src.eaddr);
}
}
/* If the MAC is in promiscuous mode, just pass everything to the next
* layer assuming it is data
*/
if (priv->promisc)
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)ind);
continue;
}
ftype = (*frame_ctrl & IEEE802154_FRAMECTRL_FTYPE) >>
IEEE802154_FRAMECTRL_SHIFT_FTYPE;
switch (ftype)
{
case IEEE802154_FRAME_DATA:
{
mac802154_rxdataframe(priv, ind);
}
break;
case IEEE802154_FRAME_COMMAND:
{
/* Get the command type. The command type is always the first
* field after the MHR. Consu;me the byte by increasing offset
* so that subsequent functions can start from the byte after
* the command ID.
*/
uint8_t cmdtype = iob->io_data[iob->io_offset++];
switch (cmdtype)
{
case IEEE802154_CMD_ASSOC_REQ:
wlinfo("Assoc request received\n");
mac802154_rx_assocreq(priv, ind);
break;
case IEEE802154_CMD_ASSOC_RESP:
wlinfo("Assoc response received\n");
mac802154_rx_assocresp(priv, ind);
break;
case IEEE802154_CMD_DISASSOC_NOT:
wlinfo("Disassoc primitive received\n");
break;
case IEEE802154_CMD_DATA_REQ:
wlinfo("Data request received\n");
mac802154_rxdatareq(priv, ind);
break;
case IEEE802154_CMD_PANID_CONF_NOT:
wlinfo("PAN ID Conflict primitive received\n");
break;
case IEEE802154_CMD_ORPHAN_NOT:
wlinfo("Orphan primitive received\n");
break;
case IEEE802154_CMD_BEACON_REQ:
wlinfo("Beacon request received\n");
break;
case IEEE802154_CMD_COORD_REALIGN:
wlinfo("Coord realign received\n");
break;
case IEEE802154_CMD_GTS_REQ:
wlinfo("GTS request received\n");
break;
}
/* Free the data indication struct from the pool */
ieee802154_primitive_free((FAR struct ieee802154_primitive_s *)
ind);
}
break;
case IEEE802154_FRAME_BEACON:
{
wlinfo("Beacon frame received. BSN: 0x%02X\n", ind->dsn);
mac802154_rxbeaconframe(priv, ind);
ieee802154_primitive_free((FAR struct ieee802154_primitive_s *)
ind);
}
break;
case IEEE802154_FRAME_ACK:
{
/* The radio layer is responsible for handling all ACKs and
* retries. If for some reason an ACK gets here, just throw
* it out.
*/
wlinfo("ACK received\n");
ieee802154_primitive_free((FAR struct ieee802154_primitive_s *)
ind);
}
break;
}
}
}
/****************************************************************************
* Name: mac802154_rxdataframe
*
* Description:
* Function called from the generic RX Frame worker to parse and handle the
* reception of a data frame.
*
****************************************************************************/
static void mac802154_rxdataframe(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind)
{
FAR struct ieee802154_primitive_s *primitive;
/* Get exclusive access to the MAC */
nxmutex_lock(&priv->lock);
/* If we are currently performing a POLL operation and we've
* received a data response, use the addressing information
* to determine if it is extracted data. If the addressing info
* matches, notify the next highest layer using POLL.confirm
* primitive. If the addressing information does not match,
* handle the transaction like any other data transaction.
*
* Note: We can't receive frames without addressing information
* unless we are the PAN coordinator. And in that situation, we
* wouldn't be performing a POLL operation. Meaning:
*
* If the current operation is POLL, we aren't the PAN coordinator
* so the incoming frame CAN'T
*
* FIXME: Fix documentation
*/
if (priv->curr_op == MAC802154_OP_POLL ||
priv->curr_op == MAC802154_OP_ASSOC ||
priv->curr_op == MAC802154_OP_AUTOEXTRACT)
{
/* If we are in promiscuous mode, we need to check if the
* frame is even for us first. If the address is not ours,
* then handle the frame like a normal transaction.
*/
if (priv->promisc)
{
if (!IEEE802154_PANIDCMP(ind->dest.panid, priv->addr.panid))
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
if (ind->dest.mode == IEEE802154_ADDRMODE_SHORT &&
!IEEE802154_SADDRCMP(ind->dest.saddr, priv->addr.saddr))
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
else if (ind->dest.mode == IEEE802154_ADDRMODE_EXTENDED &&
!IEEE802154_EADDRCMP(ind->dest.eaddr, priv->addr.eaddr))
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
else
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
}
/* If this was our extracted data, the source addressing field can only
* be NONE if we are trying to extract data from the PAN coordinator.
* A PAN coordinator shouldn't be sending us a frame if it wasn't
* our extracted data. Therefore just assume if the address mode is set
* to NONE, we process it as our extracted frame
*/
if (ind->src.mode != priv->cmd_desc->destaddr.mode)
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
if (ind->src.mode == IEEE802154_ADDRMODE_SHORT &&
!IEEE802154_SADDRCMP(ind->src.saddr,
priv->cmd_desc->destaddr.saddr))
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
else if (ind->src.mode == IEEE802154_ADDRMODE_EXTENDED &&
!IEEE802154_EADDRCMP(ind->src.eaddr,
priv->cmd_desc->destaddr.eaddr))
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)
ind);
}
/* If we've gotten this far, the frame is our extracted data. Cancel
* the timeout
*/
mac802154_timercancel(priv);
/* If a frame is received from the coordinator with a zero length
* payload or if the frame is a MAC command frame, the MLME will issue
* the MLME-POLL.confirm primitive with a status of NO_DATA. [1] pg.
* 111
*/
primitive = ieee802154_primitive_allocate();
if (priv->curr_op == MAC802154_OP_POLL)
{
primitive->type = IEEE802154_PRIMITIVE_CONF_POLL;
if (ind->frame->io_offset == ind->frame->io_len)
{
primitive->u.pollconf.status = IEEE802154_STATUS_NO_DATA;
}
else
{
primitive->u.pollconf.status = IEEE802154_STATUS_SUCCESS;
}
}
else if (priv->curr_op == MAC802154_OP_ASSOC)
{
/* If we ever receive a data frame back as a response to the
* association request, we assume it means there wasn't any data.
*/
primitive->type = IEEE802154_PRIMITIVE_CONF_ASSOC;
primitive->u.assocconf.status = IEEE802154_STATUS_NO_DATA;
}
/* We are no longer performing the association operation */
priv->curr_op = MAC802154_OP_NONE;
priv->cmd_desc = NULL;
nxsem_post(&priv->opsem);
/* Release the MAC and notify the next highest layer */
mac802154_notify(priv, primitive);
/* If there was data, pass it along */
if (ind->frame->io_len > ind->frame->io_offset)
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)ind);
}
else
{
ieee802154_primitive_free(
(FAR struct ieee802154_primitive_s *)ind);
}
}
else
{
mac802154_notify(priv, (FAR struct ieee802154_primitive_s *)ind);
}
nxmutex_unlock(&priv->lock);
}
/****************************************************************************
* Name: mac802154_rxdatareq
*
* Description:
* Function called from the generic RX Frame worker to parse and handle the
* reception of an Data Request MAC command frame.
*
****************************************************************************/
static void mac802154_rxdatareq(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind)
{
FAR struct ieee802154_txdesc_s *txdesc;
FAR struct iob_s *iob;
uint16_t *frame_ctrl;
/* Get exclusive access to the MAC */
nxmutex_lock(&priv->lock);
/* Search the list of indirect transactions to see if there are any waiting
* for the requesting device.
*/
/* TODO: I believe there is an issue here. If there is for some reason a
* outgoing data frame to a device who is currently requesting association,
* we will send the data frame as a response to an association request. We
* need to check for this condition.
*/
txdesc = (FAR struct ieee802154_txdesc_s *)sq_peek(&priv->indirect_queue);
while (txdesc != NULL)
{
if (txdesc->destaddr.mode == ind->src.mode)
{
if (txdesc->destaddr.mode == IEEE802154_ADDRMODE_SHORT)
{
if (IEEE802154_SADDRCMP(txdesc->destaddr.saddr,
ind->src.saddr))
{
/* Remove the transaction from the queue */
sq_rem((FAR sq_entry_t *)txdesc, &priv->indirect_queue);
/* NOTE: We don't do anything with the purge timeout,
* because we really don't need to. As of now, I see no
* disadvantage to just letting the timeout expire, which
* won't purge the transaction since it is no longer on
* the list, and then it will reschedule the next timeout
* appropriately. The logic otherwise may get complicated
* even though it may save a few clock cycles.
*/
/* The addresses match, send the transaction immediately */
priv->radio->txdelayed(priv->radio, txdesc, 0);
priv->beaconupdate = true;
nxmutex_unlock(&priv->lock);
return;
}
}
else if (txdesc->destaddr.mode == IEEE802154_ADDRMODE_EXTENDED)
{
if (IEEE802154_EADDRCMP(txdesc->destaddr.eaddr,
ind->src.eaddr))
{
/* Remove the transaction from the queue */
sq_rem((FAR sq_entry_t *)txdesc, &priv->indirect_queue);
/* The addresses match, send the transaction immediately */
priv->radio->txdelayed(priv->radio, txdesc, 0);
priv->beaconupdate = true;
nxmutex_unlock(&priv->lock);
return;
}
}
else
{
DEBUGPANIC();
}
}
txdesc = (FAR struct ieee802154_txdesc_s *)
sq_next((FAR sq_entry_t *)txdesc);
}
/* If there is no data frame pending for the requesting device, the
* coordinator shall send a data frame without requesting acknowledgment
* to the device containing a zero length payload, indicating that no data
* are present, using one of the mechanisms described in this subclause.
* [1] pg. 43
*/
/* Allocate an IOB to put the frame in */
iob = iob_alloc(false);
DEBUGASSERT(iob != NULL);
iob->io_len += 2;
/* Cast the first two bytes of the IOB to a uint16_t frame control field */
frame_ctrl = (FAR uint16_t *)&iob->io_data[0];
/* Ensure we start with a clear frame control field */
*frame_ctrl = 0;
/* Set the frame type to Data */
*frame_ctrl |= IEEE802154_FRAME_DATA << IEEE802154_FRAMECTRL_SHIFT_FTYPE;
/* Each time a data or a MAC command frame is generated, the MAC sublayer
* shall copy the value of macDSN into the Sequence Number field of the MHR
* of the outgoing frame and then increment it by one. [1] pg. 40.
*/
iob->io_data[iob->io_len++] = priv->dsn++;
/* Use the source address information from the received data request to
* respond.
*/
mac802154_putpanid(iob, ind->src.panid);
if (ind->src.mode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_putsaddr(iob, ind->src.saddr);
}
else if (ind->src.mode == IEEE802154_ADDRMODE_EXTENDED)
{
mac802154_puteaddr(iob, ind->src.eaddr);
}
else
{
DEBUGPANIC();
}
/* Set the destination addr mode inside the frame control field */
*frame_ctrl |= (ind->src.mode << IEEE802154_FRAMECTRL_SHIFT_DADDR);
/* Check the source PAN ID of the incoming request is the same as ours. */
if (IEEE802154_PANIDCMP(ind->src.panid, priv->addr.panid))
{
*frame_ctrl |= IEEE802154_FRAMECTRL_PANIDCOMP;
}
else
{
/* Copy in our PAN ID */
mac802154_putpanid(iob, priv->addr.panid);
}
/* Copy in our address using the mode that the device used to address us */
if (ind->dest.mode == IEEE802154_ADDRMODE_SHORT)
{
mac802154_putsaddr(iob, priv->addr.saddr);
*frame_ctrl |= (IEEE802154_ADDRMODE_SHORT <<
IEEE802154_FRAMECTRL_SHIFT_SADDR);
}
else
{
mac802154_puteaddr(iob, priv->addr.eaddr);
*frame_ctrl |= (IEEE802154_ADDRMODE_EXTENDED <<
IEEE802154_FRAMECTRL_SHIFT_SADDR);
}
/* Allocate the txdesc, waiting if necessary, allow interruptions */
mac802154_txdesc_alloc(priv, &txdesc);
txdesc->frame = iob;
txdesc->frametype = IEEE802154_FRAME_DATA;
txdesc->ackreq = false;
nxmutex_unlock(&priv->lock);
priv->radio->txdelayed(priv->radio, txdesc, 0);
}
/****************************************************************************
* Name: mac802154_edresult
*
* Description:
* Called from the radio driver through the callback struct. This function
* is called when the radio has finished an energy detect operation. This
* is triggered by a SCAN.request primitive with ScanType set to Energy
* Detect (ED)
*
****************************************************************************/
static void
mac802154_edresult(FAR const struct ieee802154_radiocb_s *radiocb,
uint8_t edval)
{
FAR struct mac802154_radiocb_s *cb =
(FAR struct mac802154_radiocb_s *)radiocb;
FAR struct ieee802154_privmac_s *priv;
DEBUGASSERT(cb != NULL && cb->priv != NULL);
priv = cb->priv;
/* Get exclusive access to the driver structure. We don't care about any
* signals so if we see one, just go back to trying to get access again.
*/
nxmutex_lock(&priv->lock);
/* If we are actively performing a scan operation, notify the handler */
if (priv->curr_op == MAC802154_OP_SCAN)
{
mac802154_edscan_onresult(priv, edval);
}
/* Relinquish control of the private structure */
nxmutex_unlock(&priv->lock);
}
static void mac802154_sfevent(FAR const struct ieee802154_radiocb_s *radiocb,
enum ieee802154_sfevent_e sfevent)
{
FAR struct mac802154_radiocb_s *cb =
(FAR struct mac802154_radiocb_s *)radiocb;
FAR struct ieee802154_privmac_s *priv;
DEBUGASSERT(cb != NULL && cb->priv != NULL);
priv = cb->priv;
/* Get exclusive access to the driver structure. We don't care about any
* signals so if we see one, just go back to trying to get access again.
*/
nxmutex_lock(&priv->lock);
switch (sfevent)
{
case IEEE802154_SFEVENT_ENDOFACTIVE:
{
#ifdef CONFIG_MAC802154_SFEVENT_VERBOSE
wlinfo("End of superframe\n");
#endif
/* Check if there is any reason to update the beacon */
if (priv->beaconupdate)
{
mac802154_updatebeacon(priv);
priv->radio->beaconupdate(priv->radio,
&priv->beaconframe[priv->bf_ind]);
}
}
break;
default:
break;
}
nxmutex_unlock(&priv->lock);
}
/****************************************************************************
* Name: mac802154_rxbeaconframe
*
* Description:
* Function called from the generic RX Frame worker to parse and handle the
* reception of a beacon frame.
*
* Assumptions: MAC is unlocked
*
****************************************************************************/
static void mac802154_rxbeaconframe(FAR struct ieee802154_privmac_s *priv,
FAR struct ieee802154_data_ind_s *ind)
{
FAR struct ieee802154_txdesc_s *respdesc;
FAR struct ieee802154_primitive_s *primitive;
FAR struct ieee802154_beacon_ind_s *beacon;
FAR struct iob_s *iob = ind->frame;
uint8_t ngtsdesc;
uint8_t gtsdirmask;
bool pending_saddr = false;
bool pending_eaddr = false;
int i;
/* Even though we may not use the primitive, we allocate one to hold all
* the parsed beacon information. Freeing the primitive is quick, so it's
* worth saving a copy (If you were to parse all the info in locally, you
* would have to copy the data over in the case that you actually need to
* notify the next highest layer)
*/
primitive = ieee802154_primitive_allocate();
beacon = &primitive->u.beaconind;
/* Make sure there is another 2 bytes to process */
if (iob->io_len < iob->io_offset + 2)
{
goto errout;
}
/* Copy the coordinator address and channel info into the pan descriptor */
memcpy(&beacon->pandesc.coordaddr, &ind->src,
sizeof(struct ieee802154_addr_s));
beacon->pandesc.chan = priv->currscan.channels[priv->scanindex];
beacon->pandesc.chpage = priv->currscan.chpage;
beacon->pandesc.lqi = ind->lqi;
beacon->pandesc.timestamp = ind->timestamp;
/* Parse the superframe specification field */
beacon->pandesc.sfspec.beaconorder =
IEEE802154_GETBEACONORDER(iob->io_data, iob->io_offset);
beacon->pandesc.sfspec.sforder =
IEEE802154_GETSFORDER(iob->io_data, iob->io_offset);
beacon->pandesc.sfspec.final_capslot =
IEEE802154_GETFINCAPSLOT(iob->io_data, iob->io_offset);
beacon->pandesc.sfspec.ble =
IEEE802154_GETBLE(iob->io_data, iob->io_offset);
beacon->pandesc.sfspec.pancoord =
IEEE802154_GETPANCOORD(iob->io_data, iob->io_offset);
beacon->pandesc.sfspec.assocpermit =
IEEE802154_GETASSOCPERMIT(iob->io_data, iob->io_offset);
iob->io_offset += 2;
/* Make sure there is another byte to process (GTS Spec) */
if (iob->io_len < iob->io_offset + 1)
{
goto errout;
}
/* Parse the GTS Specification field */
ngtsdesc =
IEEE802154_GETGTSDESCCOUNT(iob->io_data, iob->io_offset);
beacon->pandesc.gtspermit =
IEEE802154_GETGTSPERMIT(iob->io_data, iob->io_offset);
iob->io_offset++;
/* If there are any GTS descriptors, handle the GTS Dir and List fields */
if (ngtsdesc > 0)
{
/* Make sure there is another bytes to process (GTS Direction) */
if (iob->io_len < iob->io_offset + 1)
{
goto errout;
}
gtsdirmask = IEEE802154_GETGTSDIRMASK(iob->io_data, iob->io_offset);
UNUSED(gtsdirmask);
iob->io_offset++;
/* Make sure there are enough bytes left to represent the GTS List */
if (iob->io_len < iob->io_offset + (3 * ngtsdesc))
{
goto errout;
}
for (i = 0; i < ngtsdesc; i++)
{
/* For now we just discard the data by skipping over it */
iob->io_offset += 3;
}
}
/* Pending address fields. Min 1 byte, the Pending Address Specification */
if (iob->io_len < iob->io_offset + 1)
{
goto errout;
}
beacon->pendaddr.nsaddr =
IEEE802154_GETNPENDSADDR(iob->io_data, iob->io_offset);
beacon->pendaddr.neaddr =
IEEE802154_GETNPENDEADDR(iob->io_data, iob->io_offset);
iob->io_offset++;
/* Make sure there are enough bytes left to represent the address list */
if (iob->io_len < (iob->io_offset +
(IEEE802154_SADDRSIZE * beacon->pendaddr.nsaddr) +
(IEEE802154_EADDRSIZE * beacon->pendaddr.neaddr)))
{
goto errout;
}
/* Copy in the pending addresses */
for (i = 0; i < beacon->pendaddr.nsaddr; i++)
{
beacon->pendaddr.addr[i].mode = IEEE802154_ADDRMODE_SHORT;
mac802154_takesaddr(iob, beacon->pendaddr.addr[i].saddr);
/* Check if the short address matches our short address */
if (IEEE802154_SADDRCMP(beacon->pendaddr.addr[i].saddr,
priv->addr.saddr))
{
/* Wait to actually decide how to handle this until we parse
* the rest of the frame
*/
wlinfo("Data pending for us in coord\n");
pending_saddr = true;
}
}
for (i = beacon->pendaddr.nsaddr;
i < (beacon->pendaddr.nsaddr + beacon->pendaddr.neaddr);
i++)
{
beacon->pendaddr.addr[i].mode = IEEE802154_ADDRMODE_EXTENDED;
mac802154_takeeaddr(iob, beacon->pendaddr.addr[i].eaddr);
/* If the extended address matches our extended address */
if (IEEE802154_EADDRCMP(beacon->pendaddr.addr[i].eaddr,
priv->addr.eaddr))
{
/* Wait to actually decide how to handle this until we parse
* the rest of the frame
*/
wlinfo("Data pending for us in coord\n");
pending_eaddr = true;
}
}
/* If there is anything left, process it as the beacon payload */
beacon->payloadlength = iob->io_len - iob->io_offset;
if (beacon->payloadlength > 0)
{
memcpy(beacon->payload, &iob->io_data[iob->io_offset],
beacon->payloadlength);
}
/* At this point, all relevant info is extracted from the incoming frame */
nxmutex_lock(&priv->lock);
if (priv->curr_op == MAC802154_OP_SCAN)
{
/* Check to see if we already have a frame from this coordinator */
for (i = 0; i < priv->npandesc; i++)
{
if (priv->currscan.channels[priv->scanindex] !=
priv->pandescs[i].chan)
{
continue;
}
if (memcmp(&ind->src, &priv->pandescs[i].coordaddr,
sizeof(struct ieee802154_addr_s)) != 0)
{
continue;
}
/* The beacon is the same as another, so discard it */
ieee802154_primitive_free(primitive);
nxmutex_unlock(&priv->lock);
return;
}
/* TODO: There is supposed to be different logic for the scanning
* procedure based on the macAutoRequest attribute. Currently, we
* perform scan operations as if macAutoRequest is set to TRUE,
* without actually checking the value. Basically, if macAutoRequest
* is TRUE, we are supposed to round up all of the pandesc results and
* pass them all up via the SCAN.confirm primitive. If macAutoRequest
* is FALSE, we are supposed to notify the next highest layer each
* time a unique beacon is received via the BEACON.notify primitive,
* and pass a NULLed out list of pandesc when SCAN.confirm is sent.
*/
/* Copy the pan desc to the list of pan desc */
memcpy(&priv->pandescs[priv->npandesc], &beacon->pandesc,
sizeof(struct ieee802154_pandesc_s));
priv->npandesc++;
if (priv->npandesc == MAC802154_NPANDESC)
{
mac802154_scanfinish(priv, IEEE802154_STATUS_LIMITREACHED);
}
}
/* If we are not performing a SCAN operation */
else
{
/* Check superframe structure and update the appropriate attributes. */
if (memcmp(&priv->sfspec, &beacon->pandesc.sfspec,
sizeof(struct ieee802154_superframespec_s)) != 0)
{
/* Copy in the new superframe spec */
memcpy(&priv->sfspec, &beacon->pandesc.sfspec,
sizeof(struct ieee802154_superframespec_s));
/* Tell the radio layer about the superframe spec update */
priv->radio->sfupdate(priv->radio, &priv->sfspec);
}
/* If we are performing an association and there is data pending for us
* we ignore the autoRequest logic and just extract it. We also don't
* send a BEACON-NOTFIY.indication in this case, not sure if that is
* the right thing to do, can't find anything definitive in standard.
*/
if (priv->curr_op == MAC802154_OP_ASSOC && pending_eaddr)
{
priv->curr_cmd = IEEE802154_CMD_DATA_REQ;
mac802154_txdesc_alloc(priv, &respdesc);
mac802154_createdatareq(priv, &priv->pandesc.coordaddr,
IEEE802154_ADDRMODE_EXTENDED, respdesc);
/* Link the transaction into the CSMA transaction list */
sq_addlast((FAR sq_entry_t *)respdesc, &priv->csma_queue);
/* Notify the radio driver that there is data available */
priv->radio->txnotify(priv->radio, false);
}
else
{
if (priv->autoreq || priv->curr_op == MAC802154_OP_POLL)
{
/* If a beacon frame is received and macAutoRequest is set to
* TRUE, the MLME shall first issue the MLME-
* BEACON-NOTIFY.indication primitive if the beacon contains
* any payload.
*/
if (beacon->payloadlength > 0)
{
mac802154_notify(priv, primitive);
}
/* If we have data pending for us, attempt to extract it. If
* for some reason we have data pending under our short
* address and our extended address, let the short address
* arbitrarily take precedence
*/
if (pending_saddr | pending_eaddr)
{
mac802154_txdesc_alloc(priv, &respdesc);
if (priv->curr_op == MAC802154_OP_POLL)
{
priv->curr_cmd = IEEE802154_CMD_DATA_REQ;
}
else if (priv->curr_op == MAC802154_OP_ASSOC)
{
priv->curr_cmd = IEEE802154_CMD_DATA_REQ;
}
else if (priv->curr_op == MAC802154_OP_NONE)
{
DEBUGASSERT(priv->opsem.semcount == 1);
nxsem_wait_uninterruptible(&priv->opsem);
priv->curr_op = MAC802154_OP_AUTOEXTRACT;
priv->curr_cmd = IEEE802154_CMD_DATA_REQ;
}
if (pending_saddr)
{
mac802154_createdatareq(priv, &priv->pandesc.coordaddr,
IEEE802154_ADDRMODE_SHORT,
respdesc);
}
else
{
mac802154_createdatareq(priv, &priv->pandesc.coordaddr,
IEEE802154_ADDRMODE_EXTENDED,
respdesc);
}
/* Link the transaction into the CSMA transaction list */
sq_addlast((FAR sq_entry_t *)respdesc, &priv->csma_queue);
/* Notify the radio driver that there is data available */
priv->radio->txnotify(priv->radio, false);
}
/* If there was a beacon payload, we used the primitive, so
* return here to make sure we don't free the primitive.
*/
if (beacon->payloadlength > 0)
{
nxmutex_unlock(&priv->lock);
return;
}
}
else
{
/* If a valid beacon frame is received and macAutoRequest is
* set to FALSE, the MLME shall indicate the beacon parameters
* to the next higher layer by issuing the
* MLME-BEACON-NOTIFY.indication primitive. [1] pg. 38
*/
mac802154_notify(priv, primitive);
nxmutex_unlock(&priv->lock);
return; /* Return so that we don't free the primitive */
}
}
}
nxmutex_unlock(&priv->lock);
ieee802154_primitive_free(primitive);
return;
errout:
wlwarn("Received beacon with bad format\n");
ieee802154_primitive_free(primitive);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154_create
*
* Description:
* Create a 802.15.4 MAC device from a 802.15.4 compatible radio device.
*
* The returned MAC structure should be passed to either the next highest
* layer in the network stack, or registered with a mac802154dev character
* or network drivers. In any of these scenarios, the next highest layer
* should register a set of callbacks with the MAC layer by setting the
* mac->cbs member.
*
* NOTE: This API does not create any device accessible to userspace. If
* you want to call these APIs from userspace, you have to wrap your mac
* in a character device via mac802154_device.c.
*
* Input Parameters:
* radiodev - an instance of an IEEE 802.15.4 radio
*
* Returned Value:
* An opaque reference to the MAC state data.
*
****************************************************************************/
MACHANDLE mac802154_create(FAR struct ieee802154_radio_s *radiodev)
{
FAR struct ieee802154_privmac_s *mac;
FAR struct ieee802154_radiocb_s *radiocb;
/* Allocate object */
mac = (FAR struct ieee802154_privmac_s *)
kmm_zalloc(sizeof(struct ieee802154_privmac_s));
if (mac == NULL)
{
wlinfo("Failed allocation privmac structure\n");
return NULL;
}
/* Allow exclusive access to the privmac struct */
nxmutex_init(&mac->lock);
/* Allow exclusive access to the dedicated command transaction */
nxsem_init(&mac->opsem, 0, 1);
/* Initialize fields */
mac->radio = radiodev;
/* Initialize the Radio callbacks */
mac->radiocb.priv = mac;
radiocb = &mac->radiocb.cb;
radiocb->poll = mac802154_radiopoll;
radiocb->txdone = mac802154_txdone;
radiocb->rxframe = mac802154_rxframe;
radiocb->sfevent = mac802154_sfevent;
radiocb->edresult = mac802154_edresult;
/* Bind our callback structure */
radiodev->bind(radiodev, &mac->radiocb.cb);
/* Initialize our various data pools */
ieee802154_primitivepool_initialize();
mac802154_resetqueues(mac);
mac802154_req_reset((MACHANDLE)mac, true);
return (MACHANDLE)mac;
}
Reference in New Issue View Git Blame Copy Permalink