Minamiya Natsuki 0357115bf9 Merged in MinamiyaNatsuki/nuttx (pull request #1095) ...

Remove duplicate code from stm32_bringup.c

This code repeated two times by mistake.

Approved-by: Gregory Nutt <gnutt@nuttx.org>

2019-12-15 12:21:28 +00:00

..

axoloti

boards/arm/stm32/axoloti: Every BSP must provide boot board_late_initialize() AND board_app_initialize(). That is because you never now how the configuration will be set. CONFIG_LIB_BOARDCTL may be auto-selected by applications that need boardctl() support... requiring the existence of board_app_initialize().

2019-10-26 17:45:45 -06:00

clicker2-stm32

boards/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS.

2019-11-29 17:47:03 -06:00

cloudctrl

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

drivers

Merged in alinjerpelea/nuttx (pull request #1014)

2019-08-21 13:39:29 +00:00

fire-stm32v2

Fix use of undefined pp-token #errror, other typos.

2019-09-19 18:19:18 -06:00

hymini-stm32v

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

maple

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

mikroe-stm32f4

Fix minor typos in docs and comments.

2019-09-29 12:52:20 -06:00

nucleo-f4x1re

Remove support for generation of RRLOAD binary files. The RRLOAD binary format was used with Linux BSPs from www.ridgerun.com circa 2000-2001. It is still need by the the c5471 board if that bootloader is used. Removes the CONFIG_RRLOAD_BINARY option and tools/mkimage.sh

2019-12-09 11:29:12 -06:00

nucleo-f103rb

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

nucleo-f207zg

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

nucleo-f302r8

Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS.

2019-11-29 19:03:24 -06:00

nucleo-f303re

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

nucleo-f303ze

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

nucleo-f334r8

Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS.

2019-11-29 19:03:24 -06:00

nucleo-f410rb

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

nucleo-f446re

Remove support for generation of RRLOAD binary files. The RRLOAD binary format was used with Linux BSPs from www.ridgerun.com circa 2000-2001. It is still need by the the c5471 board if that bootloader is used. Removes the CONFIG_RRLOAD_BINARY option and tools/mkimage.sh

2019-12-09 11:29:12 -06:00

nucleo-l152re

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

olimex-stm32-e407

boards/arm/stm32/olimex-stm32-e407/scripts/: Individual linker scripts for F407ZE and F407ZG chips.

2019-11-05 18:35:23 -06:00

olimex-stm32-h405

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

olimex-stm32-h407

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

olimex-stm32-p107

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

olimex-stm32-p207

arch/arm/src/stm32 and boards/arm/stm32/olimex-stm32-p207/src: Fix an error found in build testing. There is not relationship be CONFIG_STM32_USBHOST and CONFIG_USBHOST, yet they they are used interchangably. This means that can (and did) get out of synch causing link time failures. This commit adds logic to select CONFIG_USBHOST when CONFIG_STM32_USBHOST is selected, keeping the two settings syncrhonized. Furthermore, since CONFIG_STM32_USBHOST is the authoritative setting, all ocurrences of CONFIG_USBHOST were replaced with CONFIG_STM32_USBHOST in the architecture code and in this one board code that was producing the error in build testing.

2019-10-27 15:02:56 -06:00

olimex-stm32-p407

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

olimexino-stm32

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

omnibusf4

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

photon

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

shenzhou

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

stm32_tiny

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

stm32butterfly2

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

stm32f3discovery

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

stm32f4discovery

Merged in masayuki2009/nuttx.nuttx/stm32f4dis_with_gs2200m (pull request #1057)

2019-10-22 13:38:41 +00:00

stm32f103-minimum

Merged in MinamiyaNatsuki/nuttx (pull request #1095)

2019-12-15 12:21:28 +00:00

stm32f334-disco

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

stm32f411e-disco

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

stm32f429i-disco

Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS.

2019-11-29 19:03:24 -06:00

stm32ldiscovery

Linker scripts: Fix some alignment problems.

2019-09-15 18:06:36 -06:00

stm32vldiscovery

arm/stm32/stm32vldiscovery/src/stm32_bringup.c: Fix a copy paste error introduced with commit 637004e70cc0bfdec6099e9088d34cbc6d99a068.

2019-10-27 18:40:38 -06:00

stm3210e-eval

All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.

2019-09-15 17:22:16 -06:00

stm3220g-eval

Fix use of undefined pp-token #errror, other typos.

2019-09-19 18:19:18 -06:00

stm3240g-eval

Fix use of undefined pp-token #errror, other typos.

2019-09-19 18:19:18 -06:00

viewtool-stm32f107

libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos.

2019-09-20 06:23:48 -06:00