037c9ea0a4
Summary The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private files begin with the name of the architecture, not up_. This PR addresses only these name changes for the up_*.h files. There are only three, but almost 1680 files that include them: up_arch.h up_internal.h up_vfork.h The only change to the files is from including up_arch.h to arm_arch.h (for example). The entire job required to be compatible with that Naming Convention will also require changing the naming of the up_() functions that are used only within arch/arm and board/arm. Impact There should be not impact of this change (other that one step toward more consistent naming). Testing stm32f4discovery:netnsh |
||
|---|---|---|
| .. | ||
| configs/nsh | ||
| include | ||
| scripts | ||
| src | ||
| Kconfig | ||
| README.txt | ||
README ====== This README discusses issues unique to NuttX configurations for the Axoloti open source synthesizer board featuring the STM32F427IGH6 MCU. The STM32F427IGH6 has a 180MHz Cortex-M4 core with 1MiB Flash memory and 256KiB of SRAM. The board features: - ADAU1961 24-bit 96 kHz stereo CODEC - 1/4" in/out jacks for analog audio signals - 3.5 mm jack for analog audio signals - 8 MiB of SDRAM (Alliance Memory AS4C4M16SA) - Serial MIDI in/out ports - SD Card slot - Two user LEDs and one (GPIO) push-button - USB OTG FS with Micro-AB connector (USB device mode operation) - USB OTG HS with Type-A connector (USB host mode operation) - Easy access to most IO pins Refer to http://www.axoloti.com/ for further information about this board.