8f2cdc4e60
1) Wi-Fi driver libs from Espressif ESP-IDF release/v5.0; 2) Station mode only; 3) WPA2-PSK and WPA3-SAE enabled; Not yet supported (WIP): - SoftAP mode; - 802.11k, 802.11v and 802.11R; - Power Save mode; - BLE Coexistance;
518 lines
27 KiB
C
518 lines
27 KiB
C
/****************************************************************************
|
||
* arch/xtensa/include/esp32s3/irq.h
|
||
*
|
||
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||
* contributor license agreements. See the NOTICE file distributed with
|
||
* this work for additional information regarding copyright ownership. The
|
||
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||
* "License"); you may not use this file except in compliance with the
|
||
* License. You may obtain a copy of the License at
|
||
*
|
||
* http://www.apache.org/licenses/LICENSE-2.0
|
||
*
|
||
* Unless required by applicable law or agreed to in writing, software
|
||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||
* License for the specific language governing permissions and limitations
|
||
* under the License.
|
||
*
|
||
****************************************************************************/
|
||
|
||
/* This file should never be included directly but, rather, only indirectly
|
||
* through nuttx/irq.h
|
||
*/
|
||
|
||
#ifndef __ARCH_XTENSA_INCLUDE_ESP32S3_IRQ_H
|
||
#define __ARCH_XTENSA_INCLUDE_ESP32S3_IRQ_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
/****************************************************************************
|
||
* Pre-processor Definitions
|
||
****************************************************************************/
|
||
|
||
#define ESP32S3_INT_PRIO_DEF 1
|
||
|
||
/* Interrupt Matrix
|
||
*
|
||
* The Interrupt Matrix embedded in the ESP32-S3 independently allocates
|
||
* peripheral interrupt sources to the two CPUs’ peripheral interrupts, to
|
||
* timely inform CPU0 or CPU1 to process the interrupts once the interrupt
|
||
* signals are generated.
|
||
* Peripheral interrupt sources must be routed to CPU0/CPU1 peripheral
|
||
* interrupts via this interrupt matrix due to the following considerations:
|
||
* - ESP32-S3 has 99 peripheral interrupt sources. To map them to 32 CPU0
|
||
* interrupts or 32 CPU1 interrupts, this matrix is needed.
|
||
* - Through this matrix, one peripheral interrupt source can be mapped to
|
||
* multiple CPU0 interrupts or CPU1 interrupts according to application
|
||
* requirements.
|
||
*
|
||
* Features:
|
||
* - Accept 99 peripheral interrupt sources as input.
|
||
* - Generate 26 peripheral interrupts to CPU0 and 26 peripheral interrupts
|
||
* to CPU1 as output. Note that the remaining 6 CPU0 interrupts and 6 CPU1
|
||
* interrupts are internal interrupts.
|
||
* - Support disabling CPU non-maskable interrupt (NMI) sources.
|
||
* - Support querying current interrupt status of peripheral interrupt
|
||
* sources.
|
||
*/
|
||
|
||
#define ESP32S3_PERIPH_MAC 0
|
||
#define ESP32S3_PERIPH_MAC_NMI 1
|
||
#define ESP32S3_PERIPH_PWR 2
|
||
#define ESP32S3_PERIPH_BB 3
|
||
#define ESP32S3_PERIPH_BT_MAC 4
|
||
#define ESP32S3_PERIPH_BT_BB 5
|
||
#define ESP32S3_PERIPH_BT_BB_NMI 6
|
||
#define ESP32S3_PERIPH_RWBT 7
|
||
#define ESP32S3_PERIPH_RWBLE 8
|
||
#define ESP32S3_PERIPH_RWBT_NMI 9
|
||
|
||
/* RESERVED interrupts: 12, 13, 15, 18, 19 */
|
||
|
||
#define ESP32S3_PERIPH_RWBLE_NMI 10
|
||
#define ESP32S3_PERIPH_I2C_MST 11
|
||
#define ESP32S3_PERIPH_UHCI0 14
|
||
#define ESP32S3_PERIPH_GPIO_INT_CPU 16
|
||
#define ESP32S3_PERIPH_GPIO_INT_CPU_NMI 17
|
||
|
||
/* RESERVED interrupts: 23 */
|
||
|
||
#define ESP32S3_PERIPH_SPI1 20
|
||
#define ESP32S3_PERIPH_SPI2 21
|
||
#define ESP32S3_PERIPH_SPI3 22
|
||
#define ESP32S3_PERIPH_LCD_CAM 24
|
||
#define ESP32S3_PERIPH_I2S0 25
|
||
#define ESP32S3_PERIPH_I2S1 26
|
||
#define ESP32S3_PERIPH_UART0 27
|
||
#define ESP32S3_PERIPH_UART1 28
|
||
#define ESP32S3_PERIPH_UART2 29
|
||
|
||
/* RESERVED interrupts: 33, 34 */
|
||
|
||
#define ESP32S3_PERIPH_SDIO_HOST 30
|
||
#define ESP32S3_PERIPH_PWM0 31
|
||
#define ESP32S3_PERIPH_PWM1 32
|
||
#define ESP32S3_PERIPH_LEDC 35
|
||
#define ESP32S3_PERIPH_EFUSE 36
|
||
#define ESP32S3_PERIPH_CAN 37
|
||
#define ESP32S3_PERIPH_USB 38
|
||
#define ESP32S3_PERIPH_RTC_CORE 39
|
||
|
||
/* RESERVED interrupts: 44, 45, 46, 47, 48, 49 */
|
||
|
||
#define ESP32S3_PERIPH_RMT 40
|
||
#define ESP32S3_PERIPH_PCNT 41
|
||
#define ESP32S3_PERIPH_I2C_EXT0 42
|
||
#define ESP32S3_PERIPH_I2C_EXT1 43
|
||
|
||
#define ESP32S3_PERIPH_TG_T0_LEVEL 50
|
||
#define ESP32S3_PERIPH_TG_T1_LEVEL 51
|
||
#define ESP32S3_PERIPH_TG_WDT_LEVEL 52
|
||
#define ESP32S3_PERIPH_TG1_T0_LEVEL 53
|
||
#define ESP32S3_PERIPH_TG1_T1_LEVEL 54
|
||
#define ESP32S3_PERIPH_TG1_WDT_LEVEL 55
|
||
#define ESP32S3_PERIPH_CACHE_IA 56
|
||
#define ESP32S3_PERIPH_SYSTIMER_TARGET0 57
|
||
#define ESP32S3_PERIPH_SYSTIMER_TARGET1 58
|
||
#define ESP32S3_PERIPH_SYSTIMER_TARGET2 59
|
||
|
||
#define ESP32S3_PERIPH_SPI_MEM_REJECT 60
|
||
#define ESP32S3_PERIPH_DCACHE_PRELOAD 61
|
||
#define ESP32S3_PERIPH_ICACHE_PRELOAD 62
|
||
#define ESP32S3_PERIPH_DCACHE_SYNC 63
|
||
#define ESP32S3_PERIPH_ICACHE_SYNC 64
|
||
#define ESP32S3_PERIPH_APB_ADC 65
|
||
#define ESP32S3_PERIPH_DMA_IN_CH0 66
|
||
#define ESP32S3_PERIPH_DMA_IN_CH1 67
|
||
#define ESP32S3_PERIPH_DMA_IN_CH2 68
|
||
#define ESP32S3_PERIPH_DMA_IN_CH3 69
|
||
|
||
#define ESP32S3_PERIPH_DMA_IN_CH4 70
|
||
#define ESP32S3_PERIPH_DMA_OUT_CH0 71
|
||
#define ESP32S3_PERIPH_DMA_OUT_CH1 72
|
||
#define ESP32S3_PERIPH_DMA_OUT_CH2 73
|
||
#define ESP32S3_PERIPH_DMA_OUT_CH3 74
|
||
#define ESP32S3_PERIPH_DMA_OUT_CH4 75
|
||
#define ESP32S3_PERIPH_RSA 76
|
||
#define ESP32S3_PERIPH_AES 77
|
||
#define ESP32S3_PERIPH_SHA 78
|
||
#define ESP32S3_PERIPH_INT_FROM_CPU0 79
|
||
|
||
#define ESP32S3_PERIPH_INT_FROM_CPU1 80
|
||
#define ESP32S3_PERIPH_INT_FROM_CPU2 81
|
||
#define ESP32S3_PERIPH_INT_FROM_CPU3 82
|
||
#define ESP32S3_PERIPH_ASSIST_DEBUG 83
|
||
#define ESP32S3_PERIPH_DMA_APB_PMS_MONITOR_VIOLATE 84
|
||
#define ESP32S3_PERIPH_CORE_0_IRAM0_PMS_MONITOR_VIOLATE 85
|
||
#define ESP32S3_PERIPH_CORE_0_DRAM0_PMS_MONITOR_VIOLATE 86
|
||
#define ESP32S3_PERIPH_CORE_0_PIF_PMS_MONITOR_VIOLATE 87
|
||
#define ESP32S3_PERIPH_CORE_0_PIF_PMS_MONITOR_VIOLATE_SIZE 88
|
||
#define ESP32S3_PERIPH_CORE_1_IRAM0_PMS_MONITOR_VIOLATE 89
|
||
|
||
#define ESP32S3_PERIPH_CORE_1_DRAM0_PMS_MONITOR_VIOLATE 90
|
||
#define ESP32S3_PERIPH_CORE_1_PIF_PMS_MONITOR_VIOLATE 91
|
||
#define ESP32S3_PERIPH_CORE_1_PIF_PMS_MONITOR_VIOLATE_SIZE 92
|
||
#define ESP32S3_PERIPH_BACKUP_PMS_VIOLATE 93
|
||
#define ESP32S3_PERIPH_CACHE_CORE0_ACS 94
|
||
#define ESP32S3_PERIPH_CACHE_CORE1_ACS 95
|
||
#define ESP32S3_PERIPH_USB_DEVICE 96
|
||
#define ESP32S3_PERIPH_PERIPH_BACKUP 97
|
||
#define ESP32S3_PERIPH_DMA_EXTMEM_REJECT 98
|
||
|
||
/* Total number of peripherals */
|
||
|
||
#define ESP32S3_NPERIPHERALS 99
|
||
|
||
/* Exceptions
|
||
*
|
||
* IRAM Offset Description
|
||
* 0x0000 Windows
|
||
* 0x0180 Level 2 interrupt
|
||
* 0x01c0 Level 3 interrupt
|
||
* 0x0200 Level 4 interrupt
|
||
* 0x0240 Level 5 interrupt
|
||
* 0x0280 Debug exception
|
||
* 0x02c0 NMI exception
|
||
* 0x0300 Kernel exception
|
||
* 0x0340 User exception
|
||
* 0x03c0 Double exception
|
||
*/
|
||
|
||
/* IRQ numbers for internal interrupts that are dispatched like peripheral
|
||
* interrupts.
|
||
*/
|
||
|
||
#define XTENSA_IRQ_TIMER0 0 /* INTERRUPT, bit 6 */
|
||
#define XTENSA_IRQ_TIMER1 1 /* INTERRUPT, bit 15 */
|
||
#define XTENSA_IRQ_TIMER2 2 /* INTERRUPT, bit 16 */
|
||
#define XTENSA_IRQ_SYSCALL 3 /* User interrupt w/EXCCAUSE=syscall */
|
||
#define XTENSA_IRQ_SWINT 4 /* Software interrupt */
|
||
|
||
#define XTENSA_NIRQ_INTERNAL 5 /* Number of dispatch internal interrupts */
|
||
#define XTENSA_IRQ_FIRSTPERIPH 5 /* First peripheral IRQ number */
|
||
|
||
/* IRQ numbers for peripheral interrupts coming through the Interrupt
|
||
* Matrix.
|
||
*/
|
||
|
||
#define ESP32S3_IRQ2PERIPH(irq) ((irq) - XTENSA_IRQ_FIRSTPERIPH)
|
||
#define ESP32S3_PERIPH2IRQ(id) ((id) + XTENSA_IRQ_FIRSTPERIPH)
|
||
|
||
#define ESP32S3_IRQ_MAC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_MAC)
|
||
#define ESP32S3_IRQ_MAC_NMI (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_MAC_NMI)
|
||
#define ESP32S3_IRQ_PWR (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_PWR)
|
||
#define ESP32S3_IRQ_BB (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_BB)
|
||
#define ESP32S3_IRQ_BT_MAC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_BT_MAC)
|
||
#define ESP32S3_IRQ_BT_BB (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_BB)
|
||
#define ESP32S3_IRQ_BT_BB_NMI (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_BB_NMI)
|
||
#define ESP32S3_IRQ_RWBT (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RWBT)
|
||
#define ESP32S3_IRQ_RWBLE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RWBLE)
|
||
#define ESP32S3_IRQ_RWBT_NMI (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RWBT_NMI)
|
||
|
||
#define ESP32S3_IRQ_RWBLE_NMI (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RWBLE_NMI)
|
||
#define ESP32S3_IRQ_I2C_MST (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_I2C_MST)
|
||
#define ESP32S3_IRQ_UHCI0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_UHCI0)
|
||
#define ESP32S3_IRQ_GPIO_INT_CPU (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_GPIO_INT_CPU)
|
||
#define ESP32S3_IRQ_GPIO_INT_CPU_NMI (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_GPIO_INT_CPU_NMI)
|
||
|
||
#define ESP32S3_IRQ_SPI1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SPI1)
|
||
#define ESP32S3_IRQ_SPI2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SPI2)
|
||
#define ESP32S3_IRQ_SPI3 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SPI3)
|
||
#define ESP32S3_IRQ_LCD_CAM (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_LCD_CAM)
|
||
#define ESP32S3_IRQ_I2S0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_I2S0)
|
||
#define ESP32S3_IRQ_I2S1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_I2S1)
|
||
#define ESP32S3_IRQ_UART0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_UART0)
|
||
#define ESP32S3_IRQ_UART1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_UART1)
|
||
#define ESP32S3_IRQ_UART2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_UART2)
|
||
|
||
#define ESP32S3_IRQ_SDIO_HOST (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SDIO_HOST)
|
||
#define ESP32S3_IRQ_PWM0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_PWM0)
|
||
|
||
#define ESP32S3_IRQ_SREG0 ESP32S3_IRQ_MAC
|
||
#define ESP32S3_NIRQS_SREG0 32
|
||
|
||
#define ESP32S3_IRQ_PWM1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_PWM1)
|
||
#define ESP32S3_IRQ_LEDC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_LEDC)
|
||
#define ESP32S3_IRQ_EFUSE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_EFUSE)
|
||
#define ESP32S3_IRQ_CAN (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CAN)
|
||
#define ESP32S3_IRQ_USB (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_USB)
|
||
#define ESP32S3_IRQ_RTC_CORE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RTC_CORE)
|
||
|
||
#define ESP32S3_IRQ_RMT (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RMT)
|
||
#define ESP32S3_IRQ_PCNT (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_PCNT)
|
||
#define ESP32S3_IRQ_I2C_EXT0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_I2C_EXT0)
|
||
#define ESP32S3_IRQ_I2C_EXT1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_I2C_EXT1)
|
||
|
||
#define ESP32S3_IRQ_TG_T0_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG_T0_LEVEL)
|
||
#define ESP32S3_IRQ_TG_T1_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG_T1_LEVEL)
|
||
#define ESP32S3_IRQ_TG_WDT_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG_WDT_LEVEL)
|
||
#define ESP32S3_IRQ_TG1_T0_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG1_T0_LEVEL)
|
||
#define ESP32S3_IRQ_TG1_T1_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG1_T1_LEVEL)
|
||
#define ESP32S3_IRQ_TG1_WDT_LEVEL (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_TG1_WDT_LEVEL)
|
||
#define ESP32S3_IRQ_CACHE_IA (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CACHE_IA)
|
||
#define ESP32S3_IRQ_SYSTIMER_TARGET0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SYSTIMER_TARGET0)
|
||
#define ESP32S3_IRQ_SYSTIMER_TARGET1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SYSTIMER_TARGET1)
|
||
#define ESP32S3_IRQ_SYSTIMER_TARGET2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SYSTIMER_TARGET2)
|
||
|
||
#define ESP32S3_IRQ_SPI_MEM_REJECT (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SPI_MEM_REJECT)
|
||
#define ESP32S3_IRQ_DCACHE_PRELOAD (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DCACHE_PRELOAD)
|
||
#define ESP32S3_IRQ_ICACHE_PRELOAD (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_ICACHE_PRELOAD)
|
||
#define ESP32S3_IRQ_DCACHE_SYNC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DCACHE_SYNC)
|
||
|
||
#define ESP32S3_IRQ_SREG1 ESP32S3_IRQ_PWM1
|
||
#define ESP32S3_NIRQS_SREG1 32
|
||
|
||
#define ESP32S3_IRQ_ICACHE_SYNC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_ICACHE_SYNC)
|
||
#define ESP32S3_IRQ_APB_ADC (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_APB_ADC)
|
||
#define ESP32S3_IRQ_DMA_IN_CH0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_IN_CH0)
|
||
#define ESP32S3_IRQ_DMA_IN_CH1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_IN_CH1)
|
||
#define ESP32S3_IRQ_DMA_IN_CH2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_IN_CH2)
|
||
#define ESP32S3_IRQ_DMA_IN_CH3 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_IN_CH3)
|
||
|
||
#define ESP32S3_IRQ_DMA_IN_CH4 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_IN_CH4)
|
||
#define ESP32S3_IRQ_DMA_OUT_CH0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_OUT_CH0)
|
||
#define ESP32S3_IRQ_DMA_OUT_CH1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_OUT_CH1)
|
||
#define ESP32S3_IRQ_DMA_OUT_CH2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_OUT_CH2)
|
||
#define ESP32S3_IRQ_DMA_OUT_CH3 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_OUT_CH3)
|
||
#define ESP32S3_IRQ_DMA_OUT_CH4 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_OUT_CH4)
|
||
#define ESP32S3_IRQ_RSA (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_RSA)
|
||
#define ESP32S3_IRQ_AES (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_AES)
|
||
#define ESP32S3_IRQ_SHA (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_SHA)
|
||
#define ESP32S3_IRQ_INT_FROM_CPU0 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_INT_FROM_CPU0)
|
||
|
||
#define ESP32S3_IRQ_INT_FROM_CPU1 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_INT_FROM_CPU1)
|
||
#define ESP32S3_IRQ_INT_FROM_CPU2 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_INT_FROM_CPU2)
|
||
#define ESP32S3_IRQ_INT_FROM_CPU3 (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_INT_FROM_CPU3)
|
||
#define ESP32S3_IRQ_ASSIST_DEBUG (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_ASSIST_DEBUG)
|
||
#define ESP32S3_IRQ_DMA_APB_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_APB_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_0_IRAM0_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_0_IRAM0_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_0_DRAM0_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_0_DRAM0_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_0_PIF_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_0_PIF_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_0_PIF_PMS_MONITOR_VIOLATE_SIZE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_0_PIF_PMS_MONITOR_VIOLATE_SIZE)
|
||
#define ESP32S3_IRQ_CORE_1_IRAM0_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_1_IRAM0_PMS_MONITOR_VIOLATE)
|
||
|
||
#define ESP32S3_IRQ_CORE_1_DRAM0_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_1_DRAM0_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_1_PIF_PMS_MONITOR_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_1_PIF_PMS_MONITOR_VIOLATE)
|
||
#define ESP32S3_IRQ_CORE_1_PIF_PMS_MONITOR_VIOLATE_SIZE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CORE_1_PIF_PMS_MONITOR_VIOLATE_SIZE)
|
||
#define ESP32S3_IRQ_BACKUP_PMS_VIOLATE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_BACKUP_PMS_VIOLATE)
|
||
#define ESP32S3_IRQ_CACHE_CORE0_ACS (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CACHE_CORE0_ACS)
|
||
#define ESP32S3_IRQ_CACHE_CORE1_ACS (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_CACHE_CORE1_ACS)
|
||
|
||
#define ESP32S3_IRQ_SREG2 ESP32S3_IRQ_ICACHE_SYNC
|
||
#define ESP32S3_NIRQS_SREG2 32
|
||
|
||
#define ESP32S3_IRQ_USB_DEVICE (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_USB_DEVICE)
|
||
#define ESP32S3_IRQ_PERIPH_BACKUP (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_PERIPH_BACKUP)
|
||
#define ESP32S3_IRQ_DMA_EXTMEM_REJECT (XTENSA_IRQ_FIRSTPERIPH + ESP32S3_PERIPH_DMA_EXTMEM_REJECT)
|
||
|
||
#define ESP32S3_IRQ_SREG3 ESP32S3_IRQ_USB_DEVICE
|
||
#define ESP32S3_NIRQS_SREG3 3
|
||
|
||
#define ESP32S3_NIRQ_PERIPH ESP32S3_NPERIPHERALS
|
||
|
||
#ifdef CONFIG_ESP32S3_GPIO_IRQ
|
||
|
||
/* Second level GPIO interrupts. GPIO interrupts are decoded and dispatched
|
||
* as a second level of decoding: The first level dispatches to the GPIO
|
||
* interrupt handler. The second to the decoded GPIO interrupt handler.
|
||
*/
|
||
|
||
# define ESP32S3_NIRQ_GPIO 49
|
||
# define ESP32S3_FIRST_GPIOIRQ (XTENSA_NIRQ_INTERNAL + ESP32S3_NIRQ_PERIPH)
|
||
# define ESP32S3_LAST_GPIOIRQ (ESP32S3_FIRST_GPIOIRQ + ESP32S3_NIRQ_GPIO - 1)
|
||
# define ESP32S3_PIN2IRQ(p) ((p) + ESP32S3_FIRST_GPIOIRQ)
|
||
# define ESP32S3_IRQ2PIN(i) ((i) - ESP32S3_FIRST_GPIOIRQ)
|
||
#else
|
||
# define ESP32S3_NIRQ_GPIO 0
|
||
#endif
|
||
|
||
#ifdef CONFIG_ESP32S3_RTCIO_IRQ
|
||
|
||
/* Second level RTC interrupts. RTC interrupts are decoded and dispatched
|
||
* as a second level of decoding: The first level dispatches to the RTC
|
||
* interrupt handler. The second to the decoded RTC interrupt handler.
|
||
* A third level might be required to be implemented on the driver (e.g.
|
||
* Touch pads)
|
||
*/
|
||
|
||
# define ESP32S3_NIRQ_RTCIO_PERIPH 21
|
||
# define ESP32S3_NIRQ_RTCIO_TOUCHPAD 15
|
||
# define ESP32S3_NIRQ_RTCIO (ESP32S3_NIRQ_RTCIO_PERIPH+ESP32S3_NIRQ_RTCIO_TOUCHPAD)
|
||
|
||
# define ESP32S3_FIRST_RTCIOIRQ_PERIPH (XTENSA_NIRQ_INTERNAL+ESP32S3_NIRQ_PERIPH+ESP32S3_NIRQ_GPIO)
|
||
# define ESP32S3_LAST_RTCIOIRQ_PERIPH (ESP32S3_FIRST_RTCIOIRQ_PERIPH+ESP32S3_NIRQ_RTCIO_PERIPH-1)
|
||
# define ESP32S3_IRQ_RTC_SLP_WAKEUP (ESP32S3_FIRST_RTCIOIRQ_PERIPH+0)
|
||
# define ESP32S3_IRQ_RTC_SLP_REJECT (ESP32S3_FIRST_RTCIOIRQ_PERIPH+1)
|
||
# define ESP32S3_IRQ_RTC_SDIO_IDLE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+2)
|
||
# define ESP32S3_IRQ_RTC_WDT (ESP32S3_FIRST_RTCIOIRQ_PERIPH+3)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_SCAN_DONE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+4)
|
||
# define ESP32S3_IRQ_RTC_ULP_CP (ESP32S3_FIRST_RTCIOIRQ_PERIPH+5)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_DONE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+6)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_ACTIVE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+7)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_INACTIVE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+8)
|
||
# define ESP32S3_IRQ_RTC_BROWN_OUT (ESP32S3_FIRST_RTCIOIRQ_PERIPH+9)
|
||
# define ESP32S3_IRQ_RTC_MAIN_TIMER (ESP32S3_FIRST_RTCIOIRQ_PERIPH+10)
|
||
# define ESP32S3_IRQ_RTC_SARADC1 (ESP32S3_FIRST_RTCIOIRQ_PERIPH+11)
|
||
# define ESP32S3_IRQ_RTC_TSENS (ESP32S3_FIRST_RTCIOIRQ_PERIPH+12)
|
||
# define ESP32S3_IRQ_RTC_COCPU (ESP32S3_FIRST_RTCIOIRQ_PERIPH+13)
|
||
# define ESP32S3_IRQ_RTC_SARADC2 (ESP32S3_FIRST_RTCIOIRQ_PERIPH+14)
|
||
# define ESP32S3_IRQ_RTC_SWD (ESP32S3_FIRST_RTCIOIRQ_PERIPH+15)
|
||
# define ESP32S3_IRQ_RTC_XTAL32K_DEAD (ESP32S3_FIRST_RTCIOIRQ_PERIPH+16)
|
||
# define ESP32S3_IRQ_RTC_COCPU_TRAP (ESP32S3_FIRST_RTCIOIRQ_PERIPH+17)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_TIMEOUT (ESP32S3_FIRST_RTCIOIRQ_PERIPH+18)
|
||
# define ESP32S3_IRQ_RTC_GLITCH_DET (ESP32S3_FIRST_RTCIOIRQ_PERIPH+19)
|
||
# define ESP32S3_IRQ_RTC_TOUCH_APPROACH_LOOP_DONE (ESP32S3_FIRST_RTCIOIRQ_PERIPH+20)
|
||
|
||
# define ESP32S3_FIRST_RTCIOIRQ_TOUCHPAD (ESP32S3_LAST_RTCIOIRQ_PERIPH+1)
|
||
# define ESP32S3_LAST_RTCIOIRQ_TOUCHPAD (ESP32S3_FIRST_RTCIOIRQ_TOUCHPAD+ESP32S3_NIRQ_RTCIO_TOUCHPAD-1)
|
||
# define ESP32S3_TOUCHPAD2IRQ(t) ((t) + ESP32S3_FIRST_RTCIOIRQ_TOUCHPAD)
|
||
# define ESP32S3_IRQ2TOUCHPAD(i) ((i) - ESP32S3_FIRST_RTCIOIRQ_TOUCHPAD)
|
||
#else
|
||
# define ESP32S3_NIRQ_RTCIO 0
|
||
#endif
|
||
|
||
/* Total number of interrupts */
|
||
|
||
#define NR_IRQS (XTENSA_NIRQ_INTERNAL + ESP32S3_NIRQ_PERIPH + ESP32S3_NIRQ_GPIO + ESP32S3_NIRQ_RTCIO)
|
||
|
||
/* Xtensa CPU Interrupts.
|
||
*
|
||
* Each of the two CPUs (PRO and APP) have 32 interrupts each, of which
|
||
* 26 can be mapped to peripheral interrupts:
|
||
*
|
||
* Level triggered peripherals (21 total):
|
||
* 0-5, 8-9, 12-13, 17-18 - Priority 1
|
||
* 19-21 - Priority 2
|
||
* 23, 27 - Priority 3
|
||
* 24-25 - Priority 4
|
||
* 26, 31 - Priority 5
|
||
* Edge triggered peripherals (4 total):
|
||
* 10 - Priority 1
|
||
* 22 - Priority 3
|
||
* 28, 30 - Priority 4
|
||
* NMI (1 total):
|
||
* 14 - NMI
|
||
*
|
||
* CPU peripheral interrupts can be a assigned to a CPU interrupt using the
|
||
* PRO_*_MAP_REG or APP_*_MAP_REG. There are a pair of these registers for
|
||
* each peripheral source. Multiple peripheral interrupt sources can be
|
||
* mapped to the same CPU interrupt.
|
||
*
|
||
* The remaining, six, internal CPU interrupts are:
|
||
*
|
||
* 6 Timer0 - Priority 1
|
||
* 7 Software - Priority 1
|
||
* 11 Profiling - Priority 3
|
||
* 15 Timer1 - Priority 3
|
||
* 16 Timer2 - Priority 5
|
||
* 29 Software - Priority 3
|
||
*
|
||
* A peripheral interrupt can be disabled
|
||
*/
|
||
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_0 0
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_1 1
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_2 2
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_3 3
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_4 4
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_5 5
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_6 8
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_7 9
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_8 12
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_9 13
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_10 17
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_11 18
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_12 19
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_13 20
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_14 21
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_15 23
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_16 24
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_17 25
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_18 26
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_19 27
|
||
#define ESP32S3_CPUINT_LEVELPERIPH_20 31
|
||
|
||
#define ESP32S3_CPUINT_NLEVELPERIPHS 21
|
||
#define ESP32S3_CPUINT_LEVELSET 0x8fbe333f
|
||
|
||
#define ESP32S3_CPUINT_EDGEPERIPH_0 10
|
||
#define ESP32S3_CPUINT_EDGEPERIPH_1 22
|
||
#define ESP32S3_CPUINT_EDGEPERIPH_2 28
|
||
#define ESP32S3_CPUINT_EDGEPERIPH_3 30
|
||
|
||
#define ESP32S3_CPUINT_NEDGEPERIPHS 4
|
||
#define ESP32S3_CPUINT_EDGESET 0x50400400
|
||
|
||
#define ESP32S3_CPUINT_NNMIPERIPHS 1
|
||
#define ESP32S3_CPUINT_NMISET 0x00004000
|
||
|
||
#define ESP32S3_CPUINT_MAC 0
|
||
#define ESP32S3_CPUINT_MAC_NMI 1
|
||
#define ESP32S3_CPUINT_TIMER0 6
|
||
#define ESP32S3_CPUINT_SOFTWARE0 7
|
||
#define ESP32S3_CPUINT_PROFILING 11
|
||
#define ESP32S3_CPUINT_TIMER1 15
|
||
#define ESP32S3_CPUINT_TIMER2 16
|
||
#define ESP32S3_CPUINT_SOFTWARE1 29
|
||
|
||
#define ESP32S3_CPUINT_NINTERNAL 6
|
||
|
||
#define ESP32S3_NCPUINTS 32
|
||
#define ESP32S3_CPUINT_MAX (ESP32S3_NCPUINTS - 1)
|
||
#define ESP32S3_CPUINT_PERIPHSET 0xdffe773f
|
||
#define ESP32S3_CPUINT_INTERNALSET 0x200188c0
|
||
|
||
/* Priority 1: 0-10, 12-13, 17-18 (15)
|
||
* Priority 2: 19-21 (3)
|
||
* Priority 3: 11, 15, 22-23, 27, 29 (6)
|
||
* Priority 4: 24-25, 28, 30 (4)
|
||
* Priority 5: 16, 26, 31 (3)
|
||
* Priority NMI: 14 (1)
|
||
*/
|
||
|
||
#define ESP32S3_INTPRI1_MASK 0x000637ff
|
||
#define ESP32S3_INTPRI2_MASK 0x00380000
|
||
#define ESP32S3_INTPRI3_MASK 0x28c08800
|
||
#define ESP32S3_INTPRI4_MASK 0x53000000
|
||
#define ESP32S3_INTPRI5_MASK 0x84010000
|
||
#define ESP32S3_INTNMI_MASK 0x00004000
|
||
|
||
/****************************************************************************
|
||
* Public Types
|
||
****************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
/****************************************************************************
|
||
* Inline functions
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Public Data
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Public Function Prototypes
|
||
****************************************************************************/
|
||
|
||
#ifdef __cplusplus
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
#undef EXTERN
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __ARCH_XTENSA_INCLUDE_ESP32S3_IRQ_H */
|