nuttx/arch/arm
Gregory Nutt 09ccd43d61 arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately.
This update is required to be serialized to the instruction stream meaning that after this update completes, it takes effect immediately and no exceptions of lower priority than the new boosted priority can pre-empt execution.  Because of this erratum, the priority boosting does not take place immediately, allowing the instruction after the MSR to be interrupted by an exception of lower priority than the new boosted priority. This effect is only limited to the next instruction. Subsequent instructions are guaranteed to see the new boosted priority.

This was raised in Bitbucket issue 113 from Vadzim Dambrouski.
2018-08-02 16:51:58 -06:00
..
include arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately. 2018-08-02 16:51:58 -06:00
src arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately. 2018-08-02 16:51:58 -06:00
Kconfig arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately. 2018-08-02 16:51:58 -06:00