sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0a3b20e546
nuttx/drivers/wireless/lpwan/sx127x/sx127x.h
Gustavo Henrique Nihei 330eff36d7 sourcefiles: Fix relative path in file header
2021-03-09 23:18:28 +08:00

838 lines
50 KiB
C
Raw Blame History

/****************************************************************************
* drivers/wireless/lpwan/sx127x/sx127x.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __DRIVERS_WIRELESS_LPWAN_SX127X_H
#define __DRIVERS_WIRELESS_LPWAN_SX127X_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Registers ****************************************************************/
#define SX127X_R_REGISTER 0x00 /* SX127X read register */
#define SX127X_W_REGISTER 0x80 /* SX127X write register */
/* Registers common for FSK/OOK Mode and LORA Mode */
#define SX127X_CMN_FIFO 0x00 /* FSK/OOK/LORA: FIFO read/write access */
#define SX127X_CMN_OPMODE 0x01 /* FSK/OOK/LORA: Operating mode & LORA/FSK selection */
#define SX127X_CMN_FRFMSB 0x06 /* FSK/OOK/LORA: RF Carrier Frequnecy, MSB */
#define SX127X_CMN_FRFMID 0x07 /* FSK/OOK/LORA: RF Carrier Frequency, Intermediate Bits */
#define SX127X_CMN_FRFLSB 0x08 /* FSK/OOK/LORA: RF Carrier Frequency, LSB */
#define SX127X_CMN_PACFG 0x09 /* FSK/OOK/LORA: PA selection and Output Power control */
#define SX127X_CMN_PARAMP 0x0a /* FSK/OOK/LORA: Control of PA ramp time, low phase noise PLL */
#define SX127X_CMN_OCP 0x0b /* FSK/OOK/LORA: Over Current Protection control */
#define SX127X_CMN_LNA 0x0c /* FSK/OOK/LORA: LNA settings */
#define SX127X_CMN_DIOMAP1 0x40 /* FSK/OOK/LORA: Mapping of pins DIO0 to DIO3 */
#define SX127X_CMN_DIOMAP2 0x41 /* FSK/OOK/LORA: Mapping of pins DIO4 and DIO5, ClkOut freq */
#define SX127X_CMN_VERSION 0x42 /* FSK/OOK/LORA: Semtech ID relating the silicon version */
#define SX127X_CMN_TCXO 0x4b /* FSK/OOK/LORA: TCXO or XTAL input setting */
#define SX127X_CMN_PADAC 0x4d /* FSK/OOK/LORA: Higher power settings of the PA */
#define SX127X_CMN_FTEMP 0x5b /* FSK/OOK/LORA: Stored temperature during the former IQ calibration */
#define SX127X_CMN_AGCREF 0x61 /* FSK/OOK/LORA: AGC thresholds reference */
#define SX127X_CMN_AGCTHR1 0x62 /* FSK/OOK/LORA: AGC thresholds 1 */
#define SX127X_CMN_AGCTHR2 0x63 /* FSK/OOK/LORA: AGC thresholds 2 */
#define SX127X_CMN_AGCTHR3 0x64 /* FSK/OOK/LORA: AGC thresholds 3 */
#define SX127X_CMN_PLL 0x70 /* FSK/OOK/LORA: Control of the PLL bandwidth */
/* Registers specific for FSK/OOK Mode */
#define SX127X_FOM_BITRATEMSB 0x02 /* FSK/OOK: Bit Rate setting, MSB */
#define SX127X_FOM_BITRATELSB 0x03 /* FSK/OOK: Bit Rate setting, LSB */
#define SX127X_FOM_FDEVMSB 0x04 /* FSK/OOK: Frequency Deviation setting, MSB */
#define SX127X_FOM_FDEVLSB 0x05 /* FSK/OOK: Frequency Deviation setting, LSB */
#define SX127X_FOM_RXCFG 0x0d /* FSK/OOK: AFC, AGC, ctrl */
#define SX127X_FOM_RSSICFG 0x0e /* FSK/OOK: RSSI */
#define SX127X_FOM_RSSICOLL 0x0f /* FSK/OOK: RSSI Collision detector */
#define SX127X_FOM_RSSITHR 0x10 /* FSK/OOK: RSSI Threshold control */
#define SX127X_FOM_RSSIVAL 0x11 /* FSK/OOK: RSSI value in dBm */
#define SX127X_FOM_RXBW 0x12 /* FSK/OOK: Channel Filter BW Control */
#define SX127X_FOM_AFCBW 0x13 /* FSK/OOK: AFC Channel Filter BW */
#define SX127X_FOM_OOKPEAK 0x14 /* FSK/OOK: OOK demodulator */
#define SX127X_FOM_OOKFIX 0x15 /* FSK/OOK: Threshold of the OOK demod */
#define SX127X_FOM_OOKAVG 0x16 /* FSK/OOK: Average of the OOK demod */
#define SX127X_FOM_AFCFEI 0x1A /* FSK/OOK: AFC and FEI control */
#define SX127X_FOM_AFCMSB 0x1B /* FSK/OOK: Frequency correction value of the AFC MSB */
#define SX127X_FOM_AFCLSB 0x1C /* FSK/OOK: Frequnecy correction value of the AFC LSB */
#define SX127X_FOM_FEIMSB 0x1D /* FSK/OOK: Value of the calculated frequency error MSB */
#define SX127X_FOM_FEILSB 0x1E /* FSK/OOK: Value of the calculated frequency error LSB */
#define SX127X_FOM_PREDET 0x1F /* FSK/OOK: Settings of the Preamble Detector */
#define SX127X_FOM_RXTIMEOUT1 0x20 /* FSK/OOK: Timeout RX request and RSSI */
#define SX127X_FOM_RXTIMEOUT2 0x21 /* FSK/OOK: Timeout RSSI and PayloadReady */
#define SX127X_FOM_RXTIMEOUT3 0x22 /* FSK/OOK: Timeout RSSI and SyncAddress */
#define SX127X_FOM_RXDELAY 0x23 /* FSK/OOK: Delay between RX cycles */
#define SX127X_FOM_OSC 0x24 /* FSK/OOK: RC oscillators settings, CLKOUT frequency */
#define SX127X_FOM_PREMSB 0x25 /* FSK/OOK: Preamble length MSB */
#define SX127X_FOM_PRELSB 0x26 /* FSK/OOK: Preamble length LSB */
#define SX127X_FOM_SYNCCFG 0x27 /* FSK/OOK: Sync Word Recognition control */
#define SX127X_FOM_SYNCVAL1 0x28 /* FSK/OOK: Sync Word bytes 1 */
#define SX127X_FOM_SYNCVAL2 0x29 /* FSK/OOK: Sync Word bytes 2 */
#define SX127X_FOM_SYNCVAL3 0x2a /* FSK/OOK: Sync Word bytes 3 */
#define SX127X_FOM_SYNCVAL4 0x2b /* FSK/OOK: Sync Word bytes 4 */
#define SX127X_FOM_SYNCVAL5 0x2c /* FSK/OOK: Sync Word bytes 5 */
#define SX127X_FOM_SYNCVAL6 0x2d /* FSK/OOK: Sync Word bytes 6 */
#define SX127X_FOM_SYNCVAL7 0x2e /* FSK/OOK: Sync Word bytes 7 */
#define SX127X_FOM_SYNCVAL8 0x2f /* FSK/OOK: Sync Word bytes 8 */
#define SX127X_FOM_PKTCFG1 0x30 /* FSK/OOK: Parcket mode settings 1 */
#define SX127X_FOM_PKTCFG2 0x31 /* FSK/OOK: Packet mode settings 2 */
#define SX127X_FOM_PAYLOADLEN 0x32 /* FSK/OOK: Payload length setting */
#define SX127X_FOM_NODEADDR 0x33 /* FSK/OOK: Node address */
#define SX127X_FOM_BROADCAST 0x34 /* FSK/OOK: Broadcast address */
#define SX127X_FOM_FIFOTHR 0x35 /* FSK/OOK: FIFO threshold, TX start condition */
#define SX127X_FOM_SEQCFG1 0x36 /* FSK/OOK: Top level Sequencer settings 1 */
#define SX127X_FOM_SEQCFG2 0x37 /* FSK/OOK: Top level Sequencer settings 2 */
#define SX127X_FOM_TIMRES 0x38 /* FSK/OOK: Timer 1 and 2 resolution control */
#define SX127X_FOM_TIMER1COEF 0x39 /* FSK/OOK: Timer 1 setting */
#define SX127X_FOM_TIMER2COEF 0x3a /* FSK/OOK: Timer 2 setting */
#define SX127X_FOM_IMAGECAL 0x3b /* FSK/OOK: Image calibration engine control */
#define SX127X_FOM_TEMP 0x3c /* FSK/OOK: Temperature Sensor value */
#define SX127X_FOM_LOWBAT 0x3d /* FSK/OOK: Low Battery Indicator settings */
#define SX127X_FOM_IRQ1 0x3e /* FSK/OOK: Status register 1: PLL Lock state, Timeout, RSSI */
#define SX127X_FOM_IRQ2 0x3f /* FSK/OOK: Status register 2: FIFO handling flags, Low Battery */
#define SX127X_FOM_PLLHOP 0x44 /* FSK/OOK: Control the fast frequency hopping mode */
#define SX127X_FOM_BITRATEFRAC 0x5d /* FSK/OOK: Fractional part in the Bit Rate division ratio */
/* Registers specific for LORA Mode */
#define SX127X_LRM_ADDRPTR 0x0d /* LORA: FIFO SPI pointer */
#define SX127X_LRM_TXBASE 0x0e /* LORA: Start TX data */
#define SX127X_LRM_RXBASE 0x0f /* LORA: Start RX data */
#define SX127X_LRM_RXCURR 0x10 /* LORA: Start address of last packet received */
#define SX127X_LRM_IRQMASK 0x11 /* LORA: Optional IRQ flag mask */
#define SX127X_LRM_IRQ 0x12 /* LORA: IRQ flags */
#define SX127X_LRM_RXBYTES 0x13 /* LORA: Number of received bytes */
#define SX127X_LRM_RXHDRMSB 0x14 /* LORA: Number of valid headers received MSB */
#define SX127X_LRM_RXHDRLSB 0x15 /* LORA: Number of valid headers received LSB */
#define SX127X_LRM_RXPKTMSB 0x16 /* LORA: Number of valid packets received MSB */
#define SX127X_LRM_RXPKTLSB 0x17 /* LORA: Number of valid packets received LSB */
#define SX127X_LRM_MODSTAT 0x18 /* LORA: Live LORA modem status */
#define SX127X_LRM_PKTSNR 0x19 /* LORA: Estimation of last packet SNR */
#define SX127X_LRM_PKTRSSI 0x1A /* LORA: RSSI of last packet */
#define SX127X_LRM_RSSIVAL 0x1B /* LORA: Current RSSI */
#define SX127X_LRM_HOPCHAN 0x1C /* LORA: FHSS start channel */
#define SX127X_LRM_MDMCFG1 0x1D /* LORA: Modem PHY config 1 */
#define SX127X_LRM_MDMCFG2 0x1E /* LORA: Modem PHY config 2 */
#define SX127X_LRM_RXTIMEOUTLSB 0x1F /* LORA: Receiver timeout value LSB */
#define SX127X_LRM_PREMSB 0x20 /* LORA: Size of preamble MSB */
#define SX127X_LRM_PRELSB 0x21 /* LORA: Size of preamble LSB */
#define SX127X_LRM_PAYLOADLEN 0x22 /* LORA: LORA payload length */
#define SX127X_LRM_PAYLOADMAX 0x23 /* LORA: LORA maximum payload length */
#define SX127X_LRM_HOPPER 0x24 /* LORA: FHSS Hop period */
#define SX127X_LRM_RXFIFOADDR 0x25 /* LORA: Address of last byte written in FIFO */
#define SX127X_LRM_MODEMCFG3 0x26 /* LORA: Modem PHY confgi 3*/
#define SX127X_LRM_FEIMSB 0x28 /* LORA: Estimated frequency error MSB */
#define SX127X_LRM_FEIMID 0x29 /* LORA: Estimated frequency error, MID */
#define SX127X_LRM_FEILSB 0x2a /* LORA: Estimated frequency error, LSB*/
#define SX127X_LRM_RSSIWIDEBAND 0x2c /* LORA: Wideband RSSI measurement */
#define SX127X_LRM_DETECTOPT 0x31 /* LORA: LORA detection optimize for SF6 */
#define SX127X_LRM_INVERTIQ 0x33 /* LORA: Invert LORA I and Q signals */
#define SX127X_LRM_DETECTTHR 0x37 /* LORA: LORA detection threshold for SF6 */
#define SX127X_LRM_SYNCWORD 0x39 /* LORA: LORA Sync Word */
/* Common *******************************************************************/
/* FSK/OOK/LORA: FIFO read/write access */
#define SX127X_CMN_FIFO_MASK 0xff
/* Operating mode & LORA/FSK selection */
#define SX127X_CMN_OPMODE_MODE_SHIFT (0) /* Bits 0-2: Transceiver mode */
#define SX127X_CMN_OPMODE_MODE_MASK (7 << SX127X_CMN_OPMODE_MODE_SHIFT)
# define SX127X_CMN_OPMODE_MODE_SLEEP (0 << SX127X_CMN_OPMODE_MODE_SHIFT) /* SLEEP */
# define SX127X_CMN_OPMODE_MODE_STBY (1 << SX127X_CMN_OPMODE_MODE_SHIFT) /* STDBY */
# define SX127X_CMN_OPMODE_MODE_FSTX (2 << SX127X_CMN_OPMODE_MODE_SHIFT) /* FSTX */
# define SX127X_CMN_OPMODE_MODE_TX (3 << SX127X_CMN_OPMODE_MODE_SHIFT) /* TX */
# define SX127X_CMN_OPMODE_MODE_FSRX (4 << SX127X_CMN_OPMODE_MODE_SHIFT) /* FSRX */
# define SX127X_CMN_OPMODE_MODE_RX (5 << SX127X_CMN_OPMODE_MODE_SHIFT) /* RX in FSK/OOK, RXCONTINOUS in LORA */
# define SX127X_CMN_OPMODE_MODE_RXSINGLE (6 << SX127X_CMN_OPMODE_MODE_SHIFT) /* RXSINGLE (only LORA) */
# define SX127X_CMN_OPMODE_MODE_CAD (7 << SX127X_CMN_OPMODE_MODE_SHIFT) /* CAD (only LORA) */
#define SX127X_CMN_OPMODE_LFMODEON (1 << 3) /* Bit 3: Low Frequency Mode ON */
#define SX127X_CMN_OPMODE_MODTYPE_SHIFT (5) /* Bits 5-6: Modulation type (only FSK/OOK) */
# define SX127X_CMN_OPMODE_MODTYPE_MASK (3 << SX127X_CMN_OPMODE_MODTYPE_SHIFT)
# define SX127X_CMN_OPMODE_MODTYPE_FSK (0 << SX127X_CMN_OPMODE_MODTYPE_SHIFT)
# define SX127X_CMN_OPMODE_MODTYPE_OOK (1 << SX127X_CMN_OPMODE_MODTYPE_SHIFT)
#define SX127X_CMN_OPMODE_LRMODE (1 << 7) /* Bit 7: Long Range Mode 0-FSK/OOK, 1-LORA */
/* FSK/OOK/LORA: RF carrier frequency */
#define SX127X_CMN_FRF_MAX (0xffffff)
#define SX127X_FRF_FROM_FREQ(freq) (freq/SX127X_FSTEP)
#define SX127X_CMN_FRF_MSB(frf) ((frf >> 16) & 0xff)
#define SX127X_CMN_FRF_MID(frf) ((frf >> 8) & 0xff)
#define SX127X_CMN_FRF_LSB(frf) ((frf >> 0) & 0xff)
/* FSK/OOK/LORA: PA selection and Output Power control */
#define SX127X_CMN_PACFG_OUTPOWER_SHIFT (0) /* Bits 0-4: Pout */
#define SX127X_CMN_PACFG_OUTPOWER_MASK (15 << SX127X_CMN_PACFG_OUTPOWER_SHIFT)
#define SX127X_CMN_PACFG_MAXPOWER_SHIFT (4) /* Bits 4-6: Max power output: Pmax=10.8 +0.6*MaxPower */
#define SX127X_CMN_PACFG_MAXPOWER_MASK (7 << SX127X_CMN_PACFG_MAXPOWER_SHIFT)
#define SX127X_CMN_PACFG_PASELECT (1 << 7) /* Bit 7: PA output pin */
/* FSK/OOK/LORA: Control of PA ramp time, low phase noise PLL */
#define SX127X_CMN_PARAMP_PARAMP_SHIFT (0) /* Bits 0-3: Rise/fall time of ramp up/down */
#define SX127X_CMN_PARAMP_PARAMP_MASK (15 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_3p4ms (0 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_2ms (1 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_1ms (2 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_500us (3 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_250us (4 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_125us (5 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_100us (6 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_62us (7 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_50us (8 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_40us (9 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_31us (10 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_25us (11 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_20us (12 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_15us (13 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_12us (14 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_PARAMP_11us (15 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
#define SX127X_CMN_PARAMP_SHAPING_SHIFT (5) /* Bits 5-6: Data shaping */
#define SX127X_CMN_PARAMP_SHAPING_MASK (3 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_SHAPING_NONE (0 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_SHAPING_1 (1 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_SHAPING_2 (2 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
# define SX127X_CMN_PARAMP_SHAPING_3 (3 << SX127X_CMN_PARAMP_PARAMP_SHIFT)
/* FSK/OOK/LORA: Over Current Protection control */
#define SX127X_CMN_OCP_SHIFT (0) /* Bits 0-4: Trimming of OCP current */
#define SX127X_CMN_OCP_MASK (15 << SX127X_CMN_OCP_SHIFT)
#define SX127X_CMN_OCP_OCPON (1 << 5) /* Bit 5: Enable overload current protection for the PA */
/* FSK/OOK/LORA: LNA settings */
#define SX127X_CMN_LNA_BOOSTHF_SHIFT 0 /* Bits 0-1: HF LNA current adjustment */
#define SX127X_CMN_LNA_BOOSTHF_MASK (3 << SX127X_CMN_LNA_BOOSTHF_SHIFT)
# define SX127X_CMN_LNA_BOOSTHF_OFF (0 << SX127X_CMN_LNA_BOOSTHF_SHIFT)
# define SX127X_CMN_LNA_BOOSTHF_ON (3 << SX127X_CMN_LNA_BOOSTHF_SHIFT)
#define SX127X_CMN_LNA_BOOSTLF_SHIFT 3 /* Bits 3-4: LF LNA current adjustment */
#define SX127X_CMN_LNA_BOOSTLF_MASK (3 << SX127X_CMN_LNA_BOOSTLF_SHIFT)
# define SX127X_CMN_LNA_BOOSTLF_OFF (0 << SX127X_CMN_LNA_BOOSTLF_SHIFT)
#define SX127X_CMN_LNA_GAIN_SHIFT 5 /* Bits 5-7: LNA gain setting */
#define SX127X_CMN_LNA_GAIN_MASK (7 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_1 (0 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_2 (1 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_3 (2 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_4 (3 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_5 (4 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_6 (5 << SX127X_CMN_LNA_GAIN_SHIFT)
# define SX127X_CMN_LNA_GAIN_7 (6 << SX127X_CMN_LNA_GAIN_SHIFT)
/* FSK/OOK/LORA: Mapping of pins DIO0 to DIO3 */
#define SX127X_CMN_DIOMAP1_DIO3_SHIFT (0) /* Bits 0-1: */
#define SX127X_CMN_DIOMAP1_DIO3_MASK (3 << SX127X_CMN_DIOMAP1_DIO3_SHIFT)
#define SX127X_CMN_DIOMAP1_DIO2_SHIFT (2) /* Bits 2-3: */
#define SX127X_CMN_DIOMAP1_DIO2_MASK (3 << SX127X_CMN_DIOMAP1_DIO2_SHIFT)
#define SX127X_CMN_DIOMAP1_DIO1_SHIFT (4) /* Bits 4-5: */
#define SX127X_CMN_DIOMAP1_DIO1_MASK (3 << SX127X_CMN_DIOMAP1_DIO1_SHIFT)
#define SX127X_CMN_DIOMAP1_DIO0_SHIFT (6) /* Bits 6-7: */
#define SX127X_CMN_DIOMAP1_DIO0_MASK (3 << SX127X_CMN_DIOMAP1_DIO0_SHIFT)
# define SX127X_FOM_DIOMAP1_DIO0_RXTX (0 << SX127X_CMN_DIOMAP1_DIO0_SHIFT)
# define SX127X_LRM_DIOMAP1_DIO0_RXDONE (0 << SX127X_CMN_DIOMAP1_DIO0_SHIFT)
# define SX127X_LRM_DIOMAP1_DIO0_TXDONE (1 << SX127X_CMN_DIOMAP1_DIO0_SHIFT)
# define SX127X_LRM_DIOMAP1_DIO0_CADDONE (2 << SX127X_CMN_DIOMAP1_DIO0_SHIFT)
/* FSK/OOK/LORA: Mapping of pins DIO4 and DIO5, ClkOut freq */
#define SX127X_CMN_DIOMAP2_MPD (1 << 0) /* Bit 0: MapPreambleDetect */
#define SX127X_CMN_DIOMAP2_DIO5_SHIFT (4) /* Bits 4-5: */
#define SX127X_CMN_DIOMAP2_DIO5_MASK (3 << SX127X_CMN_DIOMAP2_DIO5_SHIFT)
#define SX127X_CMN_DIOMAP2_DIO4_SHIFT (6) /* Bits 6-7: */
#define SX127X_CMN_DIOMAP2_DIO4_MASK (3 << SX127X_CMN_DIOMAP2_DIO4_SHIFT)
/* FSK/OOK/LORA: Semtech ID relating the silicon version */
#define SX127X_CMN_VERSION_MASK 0xff
/* FSK/OOK/LORA: TCXO or XTAL input setting */
#define SX127X_CMN_TCXO_INPUTON (1 << 4)
/* FSK/OOK/LORA: Higher power settings of the PA */
#define SX127X_CMN_PADAC_DEFAULT 0x04
#define SX127X_CMN_PADAC_BOOST 0x07
/* FSK/OOK/LORA: Stored temperature during the former IQ calibration */
#define SX127X_CMN_FTEMP_MASK 0xff
/* FSK/OOK/LORA: AGC thresholds reference */
#define SX127X_CMN_AGCREF_REF_SHIFT 0 /* Bits 0-5: */
#define SX127X_CMN_AGCREF_REF_MASK (63 << SX127X_CMN_AGCREF_REF_SHIFT)
#define SX127X_CMN_AGCREF_REF(v) ((v << SX127X_CMN_AGCREF_REF_SHIFT) & SX127X_CMN_AGCREF_REF_MASK)
/* FSK/OOK/LORA: AGC thresholds 1 */
#define SX127X_CMN_AGCTHR1_STEP1_SHIFT 0 /* Bits 0-4: 1st AGC threshold */
#define SX127X_CMN_AGCTHR1_STEP1_MASK (31 << SX127X_CMN_AGCTHR1_STEP1_SHIFT)
#define SX127X_CMN_AGCTHR1_STEP1(v) ((v << SX127X_CMN_AGCTHR1_STEP1_SHIFT) & SX127X_CMN_AGCTHR1_STEP1_MASK)
/* FSK/OOK/LORA: AGC thresholds 2 */
#define SX127X_CMN_AGCTHR2_STEP3_SHIFT 0 /* Bits 0-3: 3rd AGC threshold */
#define SX127X_CMN_AGCTHR2_STEP3_MASK (15 << SX127X_CMN_AGCTHR1_STEP3_SHIFT)
#define SX127X_CMN_AGCTHR2_STEP3(v) ((v << SX127X_CMN_AGCTHR2_STEP3_SHIFT) & SX127X_CMN_AGCTHR2_STEP3_MASK)
#define SX127X_CMN_AGCTHR2_STEP2_SHIFT 4 /* Bits 4-7: 2nd AGC threshold */
#define SX127X_CMN_AGCTHR2_STEP2_MASK (15 << SX127X_CMN_AGCTHR1_STEP2_SHIFT)
#define SX127X_CMN_AGCTHR2_STEP2(v) ((v << SX127X_CMN_AGCTHR2_STEP2_SHIFT) & SX127X_CMN_AGCTHR2_STEP2_MASK)
/* FSK/OOK/LORA: AGC thresholds 3 */
#define SX127X_CMN_AGCTHR3_STEP5_SHIFT 0 /* Bits 0-3: 5th AGC threshold */
#define SX127X_CMN_AGCTHR3_STEP5_MASK (15 << SX127X_CMN_AGCTHR3_STEP5_SHIFT)
#define SX127X_CMN_AGCTHR3_STEP5(v) ((v << SX127X_CMN_AGCTHR3_STEP5_SHIFT) & SX127X_CMN_AGCTHR3_STEP5_MASK)
#define SX127X_CMN_AGCTHR3_STEP4_SHIFT 4 /* Bits 4-7: 4th AGC threshold */
#define SX127X_CMN_AGCTHR3_STEP4_MASK (15 << SX127X_CMN_AGCTHR3_STEP4_SHIFT)
#define SX127X_CMN_AGCTHR3_STEP4(v) ((v << SX127X_CMN_AGCTHR3_STEP4_SHIFT) & SX127X_CMN_AGCTHR3_STEP4_MASK)
/* FSK/OOK/LORA: Control of the PLL bandwidth */
#define SX127X_CMN_PLL_BW_SHIFT (6) /* Bits 6-7: PLL bandwidth */
#define SX127X_CMN_PLL_BW_MASK (3 << SX127X_CMN_PLL_BW_SHIFT)
# define SX127X_CMN_PLL_BW_75kHz (0 << SX127X_CMN_PLL_BW_SHIFT)
# define SX127X_CMN_PLL_BW_150kHz (1 << SX127X_CMN_PLL_BW_SHIFT)
# define SX127X_CMN_PLL_BW_225kHz (2 << SX127X_CMN_PLL_BW_SHIFT)
# define SX127X_CMN_PLL_BW_300kHz (3 << SX127X_CMN_PLL_BW_SHIFT)
/* FSK/OOK ******************************************************************/
/* FSK/OOK: Bit Rate setting */
#define SX127X_FOM_BITRATE_MAX (0xffff)
#define SX127X_FOM_BITRATE_MSB(v) ((v >> 8) & 0xff)
#define SX127X_FOM_BITRATE_LSB(v) ((v >> 0) & 0xff)
/* FSK/OOK: Frequency Deviation setting */
#define SX127X_FOM_FDEV_MSB_MASK (0x3f)
#define SX127X_FOM_FDEV_MAX (0x3fff)
#define SX127X_FDEV_FROM_FREQ(freq) (freq/SX127X_FSTEP)
#define SX127X_FOM_FDEV_MSB(v) ((v >> 8) & 0xff)
#define SX127X_FOM_FDEV_LSB(v) ((v >> 0) & 0xff)
/* FSK/OOK: AFC, AGC, ctrl */
#define SX127X_FOM_RXCFG_TRG_SHIFT (0) /* Bits 0-2: RX trigger */
#define SX127X_FOM_RXCFG_TRG_MASK (7 << SX127X_FOM_RXCFG_TRG_SHIFT)
# define SX127X_FOM_RXCFG_TRG_NONE (0 << SX127X_FOM_RXCFG_TRG_SHIFT) /* 000: */
# define SX127X_FOM_RXCFG_TRG_RSSI (1 << SX127X_FOM_RXCFG_TRG_SHIFT) /* 001: */
# define SX127X_FOM_RXCFG_TRG_PREDET (6 << SX127X_FOM_RXCFG_TRG_SHIFT) /* 110: */
# define SX127X_FOM_RXCFG_TRG_RSSIPREDET (7 << SX127X_FOM_RXCFG_TRG_SHIFT) /* 111: */
#define SX127X_FOM_RXCFG_AGCAUTOON (1 << 3) /* Bit 3: AGC auto ON */
#define SX127X_FOM_RXCFG_AFCAUTOON (1 << 4) /* Bit 4: AFC auto ON */
#define SX127X_FOM_RXCFG_RESRXWITHPLL (1 << 5) /* Bit 5: Restar RX with PLL lock */
#define SX127X_FOM_RXCFG_RESRXWITHOUTPLL (1 << 6) /* Bit 6: Restart RX without PLL lock */
#define SX127X_FOM_RXCFG_RESRXONCOLLSION (1 << 7) /* Bit 7: Restart RX on collision */
/* FSK/OOK: RSSI */
#define SX127X_FOM_RSSICFG_SMOOTH_SHIFT (0) /* Bits 0-2: RSSI smoothing */
#define SX127X_FOM_RSSICFG_SMOOTH_MASK (7 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_2 (0 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_4 (1 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_8 (2 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_16 (3 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_32 (4 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_64 (5 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_128 (6 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
# define SX127X_FOM_RSSICFG_SMOOTH_256 (7 << SX127X_FOM_RSSICFG_SMOOTH_SHIFT)
#define SX127X_FOM_RSSICFG_OFFSET_SHIFT (3) /* Bits 3-7: RSSI offset */
#define SX127X_FOM_RSSICFG_OFFSET_MASK (15 << SX127X_FOM_RSSICFG_OFFSET_SHIFT)
/* FSK/OOK: RSSI value in dBm */
#define SX127X_FOM_RSSIVAL_GET(rssi) (-rssi/2)
/* FSK/OOK: Channel Filter BW Control */
#define SX127X_FOM_RXBW_EXP_SHIFT (0) /* Bits 0-2: RXBW exp */
#define SX127X_FOM_RXBW_EXP_MASK (7 << SX127X_FOM_RXBW_EXP_SHIFT)
#define SX127X_FOM_RXBW_MANT_SHIFT (3) /* Bits 3-4: RXBW mant */
#define SX127X_FOM_RXBW_MANT_MASK (3 << SX127X_FOM_RXBW_MANT_SHIFT)
# define SX127X_FOM_RXBW_MANT_16 (0 << SX127X_FOM_RXBW_MANT_SHIFT)
# define SX127X_FOM_RXBW_MANT_20 (1 << SX127X_FOM_RXBW_MANT_SHIFT)
# define SX127X_FOM_RXBW_MANT_24 (2 << SX127X_FOM_RXBW_MANT_SHIFT)
#define FSKOOK_BANDWIDTH_GET(mant, exp) (((exp << SX127X_FOM_RXBW_EXP_SHIFT) & SX127X_FOM_RXBW_EXP_MASK) | \
((mant << SX127X_FOM_RXBW_MANT_SHIFT) & SX127X_FOM_RXBW_MANT_MASK))
/* FSK/OOK: AFC Channel Filter BW */
#define SX127X_FOM_AFCBW_EXP_SHIFT (0) /* Bits 0-2: AFC exp */
#define SX127X_FOM_AFCBW_EXP_MASK (7 << SX127X_FOM_AFCBW_EXP_SHIFT)
#define SX127X_FOM_AFCBW_MANT_SHIFT (3) /* Bits 3-4: AFC mant */
#define SX127X_FOM_AFCBW_MANT_MASK (7 << SX127X_FOM_AFCBW_MANT_SHIFT)
/* FSK/OOK: OOK demodulator */
#define SX127X_FOM_OOKPEAK_THRSTEP_SHIFT (0) /* Bits 0-2: OOK peak threshold step */
#define SX127X_FOM_OOKPEAK_THRSTEP_MASK (7 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_0p5 (0 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_1p0 (1 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_1p5 (2 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_2p0 (3 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_3p0 (4 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_4p0 (5 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_5p0 (6 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRSTEP_6p0 (7 << SX127X_FOM_OOKPEAK_THRSTEP_SHIFT)
#define SX127X_FOM_OOKPEAK_THRTYPE_SHIFT (3) /* Bits 3-4: OOK threshold type */
#define SX127X_FOM_OOKPEAK_THRTYPE_MASK (7 << SX127X_FOM_OOKPEAK_STEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRTYPE_FIX (0 << SX127X_FOM_OOKPEAK_STEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRTYPE_PEAK (1 << SX127X_FOM_OOKPEAK_STEP_SHIFT)
# define SX127X_FOM_OOKPEAK_THRTYPE_AVG (2 << SX127X_FOM_OOKPEAK_STEP_SHIFT)
#define SX127X_FOM_OOKPEAK_BITSYNCON (1 << 5) /* Bit 5: Enable bit synchronizer */
/* FSK/OOK: Average of the OOK demod */
#define SX127X_FOM_OOKAVG_THRFILT_SHIFT (0) /* Bits 0-1: OOK average threshold filter */
#define SX127X_FOM_OOKAVG_THRFILT_MASK (3 << SX127X_FOM_OOKAVG_THRFILT_SHIFT)
# define SX127X_FOM_OOKAVG_THRFILT_32 (0 << SX127X_FOM_OOKAVG_THRFILT_SHIFT)
# define SX127X_FOM_OOKAVG_THRFILT_8 (1 << SX127X_FOM_OOKAVG_THRFILT_SHIFT)
# define SX127X_FOM_OOKAVG_THRFILT_4 (2 << SX127X_FOM_OOKAVG_THRFILT_SHIFT)
# define SX127X_FOM_OOKAVG_THRFILT_2 (3 << SX127X_FOM_OOKAVG_THRFILT_SHIFT)
#define SX127X_FOM_OOKAVG_OFFSET_SHIFT (2) /* Bits 2-3: OOK average offset */
#define SX127X_FOM_OOKAVG_OFFSET_MASK (3 << SX127X_FOM_OOKAVG_OFFSET_SHIFT)
# define SX127X_FOM_OOKAVG_OFFSET_0 (0 << SX127X_FOM_OOKAVG_OFFSET_SHIFT)
# define SX127X_FOM_OOKAVG_OFFSET_2 (1 << SX127X_FOM_OOKAVG_OFFSET_SHIFT)
# define SX127X_FOM_OOKAVG_OFFSET_4 (2 << SX127X_FOM_OOKAVG_OFFSET_SHIFT)
# define SX127X_FOM_OOKAVG_OFFSET_6 (3 << SX127X_FOM_OOKAVG_OFFSET_SHIFT)
#define SX127X_FOM_OOKAVG_THRDEC_SHIFT (5) /* Bits 5-7: OOK peak threshold decrement */
#define SX127X_FOM_OOKAVG_THRDEC_MASK (7 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_1 (0 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_2 (1 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_3 (2 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_4 (3 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_5 (4 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_6 (5 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_7 (6 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
# define SX127X_FOM_OOKAVG_THRDEC_8 (7 << SX127X_FOM_OOKAVG_THRDEC_SHIFT)
/* FSK/OOK: AFC and FEI control */
#define SX127X_FOM_AFCFEI_AUTOCLEARON (1 << 0) /* Bit 0: AFC auto clear ON */
#define SX127X_FOM_AFCFEI_AFCCLEAR (1 << 1) /* Bit 1: AFC clear */
#define SX127X_FOM_AFCFEI_AGCSTART (1 << 2) /* Bit 2: AGC start */
/* FSK/OOK: Frequency correction value of the AFC */
#define SX127X_FOM_AFC_MAX (0xffff)
#define SX127X_FOM_AFC_MSB(afc) ((afc >> 8) & 0xff)
#define SX127X_FOM_AFC_LSB(afc) ((afc >> 0) & 0xff)
/* FSK/OOK: Value of the calculated frequency error */
#define SX127X_FOM_FEI_MAX (0xffff)
#define SX127X_FOM_FEI_MSB(fei) ((fei >> 8) & 0xff)
#define SX127X_FOM_FEI_LSB(fei) ((fei >> 0) & 0xff)
/* FSK/OOK: Settings of the Preamble Detector */
#define SX127X_FOM_PREDET_TOL_SHIFT (0) /* Bits 0-4: Preamble detector tolerance */
#define SX127X_FOM_PREDET_TOL_MASK (31 << SX127X_FOM_PREDET_TOL_SHIFT)
#define SX127X_FOM_PREDET_TOL(tol) ((tol << SX127X_FOM_PREDET_TOL_SHIFT) & SX127X_FOM_PREDET_TOL_MASK)
#define SX127X_FOM_PREDET_SIZE_SHIFT (5) /* Bits 5-6: Preamble detector size */
#define SX127X_FOM_PREDET_SIZE_MASK (3 << SX127X_FOM_PREDET_SIZE_SHIFT)
# define SX127X_FOM_PREDET_SIZE_1B (0 << SX127X_FOM_PREDET_SIZE_SHIFT)
# define SX127X_FOM_PREDET_SIZE_2B (1 << SX127X_FOM_PREDET_SIZE_SHIFT)
# define SX127X_FOM_PREDET_SIZE_3B (2 << SX127X_FOM_PREDET_SIZE_SHIFT)
#define SX127X_FOM_PREDET_ON (1 << 7) /* Bit 7: Preamble detector ON */
/* FSK/OOK: RC oscillators settings, CLKOUT frequency */
#define SX127X_FOM_OSC_CLKOUT_SHIFT (0) /* Bits 0-2: CLKOUT frequency */
#define SX127X_FOM_OSC_CLKOUT_MASK (7 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSC (0 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSCd2 (1 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSCd4 (2 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSCd8 (3 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSCd16 (4 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_FXOSCd32 (5 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_RC (6 << SX127X_FOM_OSC_CLKOUT_SHIFT)
# define SX127X_FOM_OSC_CLKOUT_OFF (7 << SX127X_FOM_OSC_CLKOUT_SHIFT)
#define SX127X_FOM_OSC_CLKOUT_RCCALSTART (3 << 1) /* Bit 3: Trigger the RC oscillator calibration */
/* FSK/OOK: Preamble length MSB */
#define SX127X_FOM_PRE_MAX (0xffff)
#define SX127X_FOM_PRE_MSB(pre) ((pre >> 8) & 0xff)
#define SX127X_FOM_PRE_LSB(pre) ((pre >> 0) & 0xff)
/* FSK/OOK: Sync Word Recognition control */
#define SX127X_FOM_SYNCCFG_SYNCSIZE_SHIFT (0) /* Bits 0-2: Sync word size */
#define SX127X_FOM_SYNCCFG_SYNCSIZE_MASK (7 << SX127X_FOM_SYNCCFG_SYNCSIZE_SHIFT)
#define SX127X_FOM_SYNCCFG_SYNCSIZE(s) (((s) << SX127X_FOM_SYNCCFG_SYNCSIZE_SHIFT) & SX127X_FOM_SYNCCFG_SYNCSIZE_MASK)
#define SX127X_FOM_SYNCCFG_SYNCON (1 << 4) /* Bit 4: Sync word generation and detection enable */
#define SX127X_FOM_SYNCCFG_PREPOL (1 << 5) /* Bit 5: Preamble Polarity */
#define SX127X_FOM_SYNCSIZE_MAX (8)
/* FSK/OOK: Sync Word bytes */
#define SX127X_FOM_SYNCVAL_1(val) ((val >> 56) & 0xff)
#define SX127X_FOM_SYNCVAL_2(val) ((val >> 48) & 0xff)
#define SX127X_FOM_SYNCVAL_3(val) ((val >> 40) & 0xff)
#define SX127X_FOM_SYNCVAL_4(val) ((val >> 32) & 0xff)
#define SX127X_FOM_SYNCVAL_5(val) ((val >> 24) & 0xff)
#define SX127X_FOM_SYNCVAL_6(val) ((val >> 16) & 0xff)
#define SX127X_FOM_SYNCVAL_7(val) ((val >> 8) & 0xff)
#define SX127X_FOM_SYNCVAL_8(val) ((val >> 0) & 0xff)
/* FSK/OOK: Packet mode settings 1 */
#define SX127X_FOM_PKTCFG1_CRCTYPE (1 << 0) /* Bit 0: CRC type: 0 -> CCITT CRC, 1 -> IBM CRC with alternate whitening */
#define SX127X_FOM_PKTCFG1_ADDRFLT_SHIFT (1) /* Bits 1-2: Address basef filtering in RX */
#define SX127X_FOM_PKTCFG1_ADDRFLT_MASK (3 << SX127X_FOM_PKTCFG1_ADDRFLT_SHIFT)
# define SX127X_FOM_PKTCFG1_ADDRFLT_OFF (0 << SX127X_FOM_PKTCFG1_ADDRFLT_SHIFT)
# define SX127X_FOM_PKTCFG1_ADDRFLT_NA (1 << SX127X_FOM_PKTCFG1_ADDRFLT_SHIFT)
# define SX127X_FOM_PKTCFG1_ADDRFLT_NABA (2 << SX127X_FOM_PKTCFG1_ADDRFLT_SHIFT)
#define SX127X_FOM_PKTCFG1_CRCAUTOCLROFF (1 << 3) /* Bit 3: CRC auto clear OFF */
#define SX127X_FOM_PKTCFG1_CRCON (1 << 4) /* Bit 4: TX/RX CRC enable */
#define SX127X_FOM_PKTCFG1_DCFREE_SHIFT (5) /* Bits 5-6: DC-free encodeing/decoding */
#define SX127X_FOM_PKTCFG1_DCFREE_MASK (3 << SX127X_FOM_PKTCFG1_DCFREE_SHIFT)
# define SX127X_FOM_PKTCFG1_DCFREE_OFF (0 << SX127X_FOM_PKTCFG1_DCFREE_SHIFT) /* 00: None */
# define SX127X_FOM_PKTCFG1_DCFREE_M (1 << SX127X_FOM_PKTCFG1_DCFREE_SHIFT) /* 01: Manchaster */
# define SX127X_FOM_PKTCFG1_DCFREE_W (2 << SX127X_FOM_PKTCFG1_DCFREE_SHIFT) /* 10: Whitening */
#define SX127X_FOM_PKTCFG1_PCKFORMAT (1 << 7) /* Bit 7: 0 -> fixed length, 1 -> variable length*/
/* FSK/OOK: Packet mode settings 2 */
#define SX127X_FOM_PKTCFG2_PLENMSB_SHIFT (0) /* Bits 0-2: Packet length MSB */
#define SX127X_FOM_PKTCFG2_PLENMSB_MASK (7 << SX127X_FOM_PKTCFG2_PLEN_SHIFT)
#define SX127X_FOM_PKTCFG2_PLENMSB(plen) ((plen >> 8) & SX127X_FOM_PKTCFG2_PLENMSB_MASK)
#define SX127X_FOM_PKTCFG2_BEACONON (1 << 3) /* Bit 3: Beacon mode in fixed packed format */
#define SX127X_FOM_PKTCFG2_IHPF (1 << 4) /* Bit 4: reserved */
#define SX127X_FOM_PKTCFG2_IOHOMEON (1 << 5) /* Bit 5: IO-HOMECONTROL compatibility mode */
#define SX127X_FOM_PKTCFG2_DATAMODE (1 << 6) /* Bit 6: 0 -> contrinous mode, 1 -> packet mode */
/* FSK/OOK: Payload length setting */
#define SX127X_FOM_PAYLOADLEN_MAX (0x7f)
#define SX127X_FOM_PAYLOADLEN_LSB(plen) ((plen >> 0) & 0xff)
/* FSK/OOK: FIFO threshold, TX start condition */
#define SX127X_FOM_FIFOTHR_THR_SHIFT (0) /* Bits 0-5: FIFO threshold */
#define SX127X_FOM_FIFOTHR_THR_MASK (63 << SX127X_FOM_FIFOTHR_THR_SHIFT)
#define SX127X_FOM_FIFOTHR_TXSTARTCOND (1 << 7) /* Bit 7: Packet transmission start condition */
/* FSK/OOK: Top level Sequencer settings 1 */
#define SX127X_FOM_SEQCFG1_TX (1 << 0) /* Bit 0: From Transmit 0 -> LowPowerSelection, 1 -> Receive */
#define SX127X_FOM_SEQCFG1_IDLE (1 << 1) /* Bit 1: From IDLE on T1: 0 -> TX, 1 -> RX*/
#define SX127X_FOM_SEQCFG1_LOWPOWERSEL (1 << 2) /* Bit 2: Low Power Selection */
#define SX127X_FOM_SEQCFG1_START_SHIFT (3) /* Bits 3-4: From Start */
#define SX127X_FOM_SEQCFG1_START_MASK (3 << SX127X_FOM_SEQCFG1_START_SHIFT)
# define SX127X_FOM_SEQCFG1_START_LPS (0 << SX127X_FOM_SEQCFG1_START_SHIFT) /* LowPowerSelection */
# define SX127X_FOM_SEQCFG1_START_RS (1 << SX127X_FOM_SEQCFG1_START_SHIFT) /* RX */
# define SX127X_FOM_SEQCFG1_START_TS (2 << SX127X_FOM_SEQCFG1_START_SHIFT) /* TX */
# define SX127X_FOM_SEQCFG1_START_TSFL (3 << SX127X_FOM_SEQCFG1_START_SHIFT) /* TX on FifoLevel */
#define SX127X_FOM_SEQCFG1_IDLEMODE (1 << 5) /* Bit 5: IDLE Mode 0 -> standby, 1 -> sleep */
#define SX127X_FOM_SEQCFG1_SEQSTOP (1 << 6) /* Bit 6: Sequencer Stop */
#define SX127X_FOM_SEQCFG1_SEQSTART (1 << 7) /* Bit 7: Sequencer Start */
/* FSK/OOK: Top level Sequencer settings 2 */
#define SX127X_FOM_SEQCFG2_PCKRX_SHIFT (0) /* Bits 0-2: From Packet Received */
#define SX127X_FOM_SEQCFG2_PCKRX_MASK (7 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
# define SX127X_FOM_SEQCFG2_PCKRX_1 (0 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
# define SX127X_FOM_SEQCFG2_PCKRX_2 (1 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
# define SX127X_FOM_SEQCFG2_PCKRX_3 (2 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
# define SX127X_FOM_SEQCFG2_PCKRX_4 (3 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
# define SX127X_FOM_SEQCFG2_PCKRX_5 (4 << SX127X_FOM_SEQCFG2_PCKRX_SHIFT)
#define SX127X_FOM_SEQCFG2_RXTOUT_SHIFT (3) /* Bits 3-4: From RX Timeout */
#define SX127X_FOM_SEQCFG2_RXTOUT_MASK (7 << SX127X_FOM_SEQCFG2_RXTOUT_SHIFT)
# define SX127X_FOM_SEQCFG2_RXTOUT_1 (0 << SX127X_FOM_SEQCFG2_RXTOUT_SHIFT)
# define SX127X_FOM_SEQCFG2_RXTOUT_2 (1 << SX127X_FOM_SEQCFG2_RXTOUT_SHIFT)
# define SX127X_FOM_SEQCFG2_RXTOUT_3 (2 << SX127X_FOM_SEQCFG2_RXTOUT_SHIFT)
# define SX127X_FOM_SEQCFG2_RXTOUT_4 (3 << SX127X_FOM_SEQCFG2_RXTOUT_SHIFT)
#define SX127X_FOM_SEQCFG2_RX_SHIFT (5) /* Bits 5: From Receiver */
#define SX127X_FOM_SEQCFG2_RX_MASK (7 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_1 (0 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_2 (1 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_3 (2 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_4 (3 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_5 (4 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_6 (5 << SX127X_FOM_SEQCFG2_RX_SHIFT)
# define SX127X_FOM_SEQCFG2_RX_7 (6 << SX127X_FOM_SEQCFG2_RX_SHIFT)
/* FSK/OOK: Timer 1 and 2 resolution control */
#define SX127X_FOM_TIMRES_TIM1RES_SHIFT (0) /* Bits 0-1: Timer 1 Resolution */
#define SX127X_FOM_TIMRES_TIM1RES_MASK (3 << SX127X_FOM_TIMRES_TIM1RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM1RES_OFF (0 << SX127X_FOM_TIMRES_TIM1RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM1RES_64us (1 << SX127X_FOM_TIMRES_TIM1RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM1RES_4p1ms (2 << SX127X_FOM_TIMRES_TIM1RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM1RES_262ms (3 << SX127X_FOM_TIMRES_TIM1RES_SHIFT)
#define SX127X_FOM_TIMRES_TIM2RES_SHIFT (2) /* Bits 2-3: Timer 2 Resolution */
#define SX127X_FOM_TIMRES_TIM2RES_MASK (3 << SX127X_FOM_TIMRES_TIM2RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM2RES_OFF (0 << SX127X_FOM_TIMRES_TIM2RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM2RES_64us (1 << SX127X_FOM_TIMRES_TIM2RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM2RES_4p1ms (2 << SX127X_FOM_TIMRES_TIM2RES_SHIFT)
# define SX127X_FOM_TIMRES_TIM2RES_262ms (3 << SX127X_FOM_TIMRES_TIM2RES_SHIFT)
/* FSK/OOK: Image calibration engine control */
#define SX127X_FOM_IMAGECAL_TEMPMONOFF (1 << 0) /* Bit 0: Temperature monitor OFF */
#define SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT (1) /* Bit 1-2: Temperature threshold */
#define SX127X_FOM_IMAGECAL_TEMPTHR_MASK (3 << SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT)
# define SX127X_FOM_IMAGECAL_TEMPTHR_5C (0 << SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT)
# define SX127X_FOM_IMAGECAL_TEMPTHR_10C (1 << SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT)
# define SX127X_FOM_IMAGECAL_TEMPTHR_15C (2 << SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT)
# define SX127X_FOM_IMAGECAL_TEMPTHR_20C (3 << SX127X_FOM_IMAGECAL_TEMPTHR_SHIFT)
#define SX127X_FOM_IMAGECAL_TEMPCHANGE (1 << 3) /* Bit 3: Temperature change */
#define SX127X_FOM_IMAGECAL_IMGCALRUN (1 << 5) /* Bit 5: Image Calibration are running */
#define SX127X_FOM_IMAGECAL_IMGCALSTART (1 << 6) /* Bit 6: Image Calibration start */
#define SX127X_FOM_IMAGECAL_AUTOIMGCALON (1 << 7) /* Bit 7: Auto Image Calibration ON */
/* FSK/OOK: Low Battery Indicator settings */
#define SX127X_FOM_LOWBAT_TRIM_SHIFT (0) /* Bits 0-2: Low battery threshold */
#define SX127X_FOM_LOWBAT_TRIM_MASK (7 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_1p695V (0 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_1p764V (1 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_1p835V (2 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_1p905V (3 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_1p976V (4 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_2p045V (5 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_2p116V (6 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
# define SX127X_FOM_LOWBAT_TRIM_2p185V (7 << SX127X_FOM_LOWBAT_TRIM_SHIFT)
#define SX127X_FOM_LOWBAT_LOWBATON (1 << 3) /* Bit 3: Low Battery detecotr enable */
/* FSK/OOK: Status register 1: PLL Lock state, Timeout, RSSI */
#define SX127X_FOM_IRQ1_SYNCADDRMATCH (1 << 0) /* Bit 0: Sync and Address detected */
#define SX127X_FOM_IRQ1_PREAMBE (1 << 1) /* Bit 1: Preamble detected */
#define SX127X_FOM_IRQ1_TIMEOUT (1 << 2) /* Bit 2: Timeout */
#define SX127X_FOM_IRQ1_RSSI (1 << 3) /* Bit 3: RssiValue exceeds RssiThreshold in RX */
#define SX127X_FOM_IRQ1_PLLLOCK (1 << 4) /* Bit 4: PLL is locked (in FS, RX or TX) */
#define SX127X_FOM_IRQ1_TXRDY (1 << 5) /* Bit 5: set in TX mode after PA ramp-up */
#define SX127X_FOM_IRQ1_RXRDY (1 << 6) /* Bit 6: set in RX mode after RSSI, AGC and AFC */
#define SX127X_FOM_IRQ1_MODERDY (1 << 7) /* Bit 7: operation mode request is ready */
/* FSK/OOK: Status register 2: FIFO handling flags, Low Battery */
#define SX127X_FOM_IRQ2_LOWBAT (1 << 0) /* Bit 0: Low Battery */
#define SX127X_FOM_IRQ2_CRCOK (1 << 1) /* Bit 1: CRC of the payload is OK in RX */
#define SX127X_FOM_IRQ2_PAYLOADRDY (1 << 2) /* Bit 2: payload is ready in RX */
#define SX127X_FOM_IRQ2_PCKSENT (1 << 3) /* Bit 3: packet has been sent in TX */
#define SX127X_FOM_IRQ2_FIFOOVR (1 << 4) /* Bit 4: FIFO overrun */
#define SX127X_FOM_IRQ2_FIFOLVL (1 << 5) /* Bit 5: FIFO level */
#define SX127X_FOM_IRQ2_FIFOEMPTY (1 << 6) /* Bit 6: FIFO empty */
#define SX127X_FOM_IRQ2_FIFOFULL (1 << 7) /* Bit 7: FIFO full */
/* FSK/OOK: Control the fast frequency hopping mode */
#define SX127X_FOM_PLLHOP_FASTHOPON (1 << 7) /* Bit 7: Fast frequency hop enable */
/* FSK/OOK: Fractional part in the Bit Rate division ratio */
#define SX127X_FOM_BITRATEFRAC_SHIFT (0)
#define SX127X_FOM_BITRATEFRAC_MASK (0x0f)
/* LORA *********************************************************************/
/* LORA: FIFO SPI pointer */
#define SX127X_LRM_ADDRPTR_DEFAULT (0x00)
/* LORA: Start TX data */
#define SX127X_LRM_TXBASE_DEFAULT (0x80)
/* LORA: Start RX data */
#define SX127X_LRM_RXBASE_DEFAULT (0x00)
/* LORA: IRQ flag / IRQ Flags mask */
#define SX127X_LRM_IRQ_CADDETECT (1 << 0) /* Bit 0: CAD detection */
#define SX127X_LRM_IRQ_FHSSCHANGECHAN (1 << 1) /* Bit 1: FHHS change channel */
#define SX127X_LRM_IRQ_CADDONE (1 << 2) /* Bit 2: CAD done */
#define SX127X_LRM_IRQ_TXDONE (1 << 3) /* Bit 3: TX done */
#define SX127X_LRM_IRQ_VALIDHDR (1 << 4) /* Bit 4: Valid header received in RX */
#define SX127X_LRM_IRQ_PAYLOADCRCERR (1 << 5) /* Bit 5: Payload CRC error */
#define SX127X_LRM_IRQ_RXDONE (1 << 6) /* Bit 6: RX done */
#define SX127X_LRM_IRQ_RXTIMEOUT (1 << 7) /* Bit 7: RX timeout */
/* LORA: Live LORA modem status */
#define SX127X_LRM_MODSTAT_SIGDETECT (1 << 0) /* Bit 0: Signal detected */
#define SX127X_LRM_MODSTAT_SIGSYNC (1 << 1) /* Bit 1: Signal synchronized */
#define SX127X_LRM_MODSTAT_RXONGOING (1 << 2) /* Bit 2: RX on-going */
#define SX127X_LRM_MODSTAT_HDRVALID (1 << 3) /* Bit 3: Header info valid */
#define SX127X_LRM_MODSTAT_MODEMCLR (1 << 4) /* Bit 4: Modem clear */
#define SX127X_LRM_MODSTAT_RXRATE_SHIFT (5) /* Bits 5-7: Coding rate of last header received */
#define SX127X_LRM_MODSTAT_RXRATE_MASK (7 << SX127X_LRM_MODSTAT_RXRATE_SHIFT)
/* LORA: Current RSSI */
#define SX127X_LRM_RSSIVAL_HF_OFFSET (-127)
#define SX127X_LRM_RSSIVAL_LF_OFFSET (-164)
/* LORA: FHSS start channel */
#define SX127X_LRM_HOPCHAN_FHHSP_SHIFT (0) /* Bits 0-5: current value of frequency hopping in use */
#define SX127X_LRM_HOPCHAN_FHHSPN_MASK (63 << SX127X_LRM_HOPCHAN_FHHSPRESCHAN_SHIFT)
#define SX127X_LRM_HOPCHAN_CRCONPAYLOAD (1 << 6) /* Bit 6: CRC on payload */
#define SX127X_LRM_HOPCHAN_PLLTIMEOUT (1 << 7) /* Bit 7: PLL timeout */
/* LORA: Modem PHY config 1 */
#define SX127X_LRM_MDMCFG1_IMPLHDRON (1 << 0) /* Bit 0: Implicit header mode ON */
#define SX127X_LRM_MDMCFG1_CDRATE_SHIFT (1) /* Bits 1-3: Error coding rate */
#define SX127X_LRM_MDMCFG1_CDRATE_MASK (7 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_CDRATE_4d5 (1 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_CDRATE_4d6 (2 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_CDRATE_4d7 (3 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_CDRATE_4d8 (4 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
#define SX127X_LRM_MDMCFG1_BW_SHIFT (4) /* Bits 4-7: Signal bandwidth */
#define SX127X_LRM_MDMCFG1_BW_MASK (31 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_7p8kHz (0 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_10p4kHz (1 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_15p6kHz (2 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_20p8kHz (3 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_31p25kHz (4 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_41p7kHz (5 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_62p5kHz (6 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_125kHz (7 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_250kHz (8 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
# define SX127X_LRM_MDMCFG1_BW_500kHz (9 << SX127X_LRM_MDMCFG1_CDRATE_SHIFT)
/* LORA: Modem PHY config 2 */
#define SX127X_LRM_MDMCFG2_RXTIMOUT_SHIFT (0) /* Bits 0-1: RX timeout MSB */
#define SX127X_LRM_MDMCFG2_RXTIMOUT_MASK (3 << SX127X_LRM_MDMCFG2_RXTIMOUT_SHIFT)
#define SX127X_LRM_MDMCFG2_RXCRCON (1 << 2) /* Bit 2: RX payload CRC ON */
#define SX127X_LRM_MDMCFG2_TXCONT (1 << 3) /* Bit 3: TX continuous mode */
#define SX127X_LRM_MDMCFG2_SPRFACT_SHIFT (4) /* Bits 4-7: Spreading factor */
#define SX127X_LRM_MDMCFG2_SPRFACT_MASK (15 << SX127X_LRM_MDMCFG2_SPRFACT_SHIFT)
/* LORA: Receiver timeout value */
#define SX127X_LRM_RXTIMEOUT_MAX (0x3f)
#define SX127X_LRM_RXTIMEOUT_LSB(t) ((t >> 0) & 0xff)
#define SX127X_LRM_RXTIMEOUT_MSB(t) ((t >> 8) & SX127X_LRM_MDMCFG2_RXTIMOUT_MASK)
/* LORA: Size of preamble */
#define SX127X_LRM_PREMSB_DEFAULT (0x0008)
#define SX127X_LRM_PREMSB_MAX (0xffff)
#define SX127X_LRM_PRE_LSB(p) ((p >> 0) & 0xff)
#define SX127X_LRM_PRE_MSB(p) ((p >> 8) & 0xff)
/* LORA: LORA payload length */
#define SX127X_LRM_PAYLOADLEN_DEFAULT (0x01)
#define SX127X_LRM_PAYLOADLEN_MAX (0xff)
/* LORA: FHSS Hop period */
#define SX127X_LRM_HOPPER_DEFAULT (0x00)
/* LORA: Modem PHY confgi 3 */
#define SX127X_LRM_MODEMCFG3_AGCAUTOON (1 << 2) /* Bit 2: AGC auto ON */
#define SX127X_LRM_MODEMCFG3_LOWDRATEOPT (1 << 3) /* Bit 3: Low data rate optimize enable */
/* LORA: Estimated frequency error */
#define SX127X_LRM_FEIMSB_SHIFT (0)
#define SX127X_LRM_FEIMSB_MASK (15 << SX127X_LRM_FEIMSB_SHIFT)
#define SX127X_LRM_FEI(msb, mid, lsb) ((lsb << 0) | (mid << 8) | ((msb & SX127X_LRM_FEIMSB_MASK) << 16))
#define SX127X_LRM_FEI_GET(fei) () /* TODO */
/* LORA: LORA detection optimize for SF6 */
#define SX127X_LRM_DETECTOPT_DO_SHIFT (0) /* Bits 0-2: Detection optimize */
#define SX127X_LRM_DETECTOPT_DO_MASK (7 << SX127X_LRM_DETECTOPT_DO_SHIFT)
# define SX127X_LRM_DETECTOPT_DO_SF7SF12 (3 << SX127X_LRM_DETECTOPT_DO_SHIFT) /* 0x03: SF7 to SF12 */
# define SX127X_LRM_DETECTOPT_DO_SF6 (5 << SX127X_LRM_DETECTOPT_DO_SHIFT) /* 0x05: SF6 */
/* LORA: Invert LORA I and Q signals */
#define SX127X_LRM_INVERTIQ_IIQ (1 << 6) /* Bit 6: Invert the LORA I and Q signals */
/* LORA: LORA detection threshold for SF6 */
#define SX127X_LRM_DETECTTHR_SF7SF12 (0x0a)
#define SX127X_LRM_DETECTTHR_SF6 (0x0c)
/* LORA: LORA Sync Word */
#define SX127X_LRM_SYNCWORD_DEFAULT (0x12)
#define SX127X_LRM_SYNCWORD_LORAWAN (0x34)
/* Lora data rate:
* DR = SF * BW * CR / (2**SF)
*
* DR - Data rate
* SF - Spreading factor
* BW - Bandwidth
* CR - Coding rate
*/
#define LORA_DATARATE_GET(sf, bw, cr) (sf * bw * cr / (2<<sf))
/* Constants ****************************************************************/
/* FXOSC is 32 MHz */
#define SX127X_FXOSC (32000000)
/* FSTEP is FXOSC/(2**19) =~ 61 Hz */
#define SX127X_FSTEP (SX127X_FXOSC/(2<<18))
/****************************************************************************
* Public Data Types
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __DRIVERS_WIRELESS_LPWAN_SX127X_H */
Reference in New Issue View Git Blame Copy Permalink