037c9ea0a4
Summary The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private files begin with the name of the architecture, not up_. This PR addresses only these name changes for the up_*.h files. There are only three, but almost 1680 files that include them: up_arch.h up_internal.h up_vfork.h The only change to the files is from including up_arch.h to arm_arch.h (for example). The entire job required to be compatible with that Naming Convention will also require changing the naming of the up_() functions that are used only within arch/arm and board/arm. Impact There should be not impact of this change (other that one step toward more consistent naming). Testing stm32f4discovery:netnsh
189 lines
6.6 KiB
C
189 lines
6.6 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32/stm32ldiscovery/src/up_spi.c
|
|
* arch/arm/src/board/up_spi.c
|
|
*
|
|
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <errno.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/spi/spi.h>
|
|
#include <arch/board/board.h>
|
|
|
|
#include "arm_arch.h"
|
|
#include "chip.h"
|
|
#include "stm32.h"
|
|
#include "stm32ldiscovery.h"
|
|
|
|
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_spidev_initialize
|
|
*
|
|
* Description:
|
|
* Called to configure SPI chip select GPIO pins for the stm32ldiscovery board.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void weak_function stm32_spidev_initialize(void)
|
|
{
|
|
#ifdef CONFIG_STM32_SPI1
|
|
stm32_configgpio(GPIO_MEMS_CS); /* MEMS chip select */
|
|
stm32_configgpio(GPIO_MEMS_INT1); /* MEMS interrupts */
|
|
stm32_configgpio(GPIO_MEMS_INT2);
|
|
#endif
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
|
|
*
|
|
* Description:
|
|
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
|
|
* provided by board-specific logic. They are implementations of the select
|
|
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
|
* include/nuttx/spi/spi.h). All other methods (including stm32_spibus_initialize())
|
|
* are provided by common STM32 logic. To use this common SPI logic on your
|
|
* board:
|
|
*
|
|
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
|
|
* pins.
|
|
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
|
|
* board-specific logic. These functions will perform chip selection and
|
|
* status operations using GPIOs in the way your board is configured.
|
|
* 3. Add a calls to stm32_spibus_initialize() in your low level application
|
|
* initialization logic
|
|
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind the
|
|
* SPI driver to higher level logic (e.g., calling
|
|
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
|
* the SPI MMC/SD driver).
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_STM32_SPI1
|
|
void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
|
{
|
|
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
|
|
|
stm32_gpiowrite(GPIO_MEMS_CS, !selected);
|
|
}
|
|
|
|
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_STM32_SPI2
|
|
void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
|
{
|
|
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
|
}
|
|
|
|
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_STM32_SPI3
|
|
void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
|
{
|
|
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
|
}
|
|
|
|
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_spi1cmddata
|
|
*
|
|
* Description:
|
|
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
|
|
* or command (false). This function must be provided by platform-specific
|
|
* logic. This is an implementation of the cmddata method of the SPI
|
|
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
|
|
*
|
|
* Input Parameters:
|
|
*
|
|
* spi - SPI device that controls the bus the device that requires the CMD/
|
|
* DATA selection.
|
|
* devid - If there are multiple devices on the bus, this selects which one
|
|
* to select cmd or data. NOTE: This design restricts, for example,
|
|
* one one SPI display per SPI bus.
|
|
* cmd - true: select command; false: select data
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_SPI_CMDDATA
|
|
#ifdef CONFIG_STM32_SPI1
|
|
int stm32_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_STM32_SPI2
|
|
int stm32_spi2cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_STM32_SPI3
|
|
int stm32_spi3cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_SPI_CMDDATA */
|
|
|
|
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */
|