nuttx

analog

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

audio

Cosmetic changes, mostly to comments

2014-07-29 12:49:40 -06:00

binfmt

Clean-up up some warning

2014-07-11 11:58:46 -06:00

crypto

Move crypto header files from include/crypto to include/nuttx/crypto

2014-07-03 18:35:08 -06:00

fs

The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard

2014-07-29 16:36:15 -06:00

input

WM8904: Add header file support for this forcoming driver

2014-07-18 13:28:51 -06:00

lcd

SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)

2014-05-13 10:38:46 -06:00

mtd

mtd.h needs forward reference to struct spi_dev_s

2014-05-25 07:39:15 -06:00

net

NET: Important fix to the read-ahead buffer queue managment: Consumed bytes were being trimmed from the head of the queue, but the queue head itself was not being updated. From Rony XLN

2014-07-07 07:28:17 -06:00

nx

Costmetic: Update TODO list, README files, refreshed configuration, updated comments

2014-07-30 14:26:50 -06:00

power

LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks

2013-12-05 10:37:55 -06:00

sensors

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

sercomm

Move include/sercomm to include/nuttx/sercomm

2012-03-24 18:33:21 +00:00

serial

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

spi

Nucleo: Remove bogus MPU definitions

2014-04-25 08:52:50 -06:00

syslog

Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE

2014-07-01 12:00:40 -06:00

usb

Cosmetic changes

2014-05-28 14:09:58 -06:00

video

Fix typo RBG -> RGB in several macros

2014-05-12 13:00:48 -06:00

wireless

Cosmetic changes, mostly to comments

2014-07-29 12:49:40 -06:00

.gitignore

Mostly updates and corrections to .gitignore files

2013-04-04 15:39:50 -06:00

arch.h

If the CPU load measurements are being driven by an external clock, then the prototype for sched_process_cpuload() must be available in include/nuttx/arch.h

2014-04-30 15:47:55 -06:00

ascii.h

Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao

2013-07-09 07:59:28 -06:00

can.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

clock.h

CPU load calculations now available for all threads. Available in /proc/pid/loadavg

2014-02-23 10:55:01 -06:00

compiler.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

configdata.h

Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit

2013-11-01 07:39:20 -06:00

float.h

lib/math files not follow coding standard; float, double, and long double versions in separate files to reduce size of dumb link

2012-10-28 18:42:09 +00:00

gran.h

Resync new repository with old repo r5166

2012-09-17 18:35:37 +00:00

i2c.h

maXTouch: Check for successful memory allocation was backward

2014-07-07 09:55:39 -06:00

init.h

Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane

2013-11-01 11:16:51 -06:00

irq.h

Add support for ram vectors to the ARMv7-M architecture

2013-03-18 21:10:08 +00:00

kmalloc.h

/proc task directories can now have sub-directories

2013-12-15 10:31:07 -06:00

kthread.h

NX server needs to be on a kernel thread for the kernel build

2013-12-30 17:55:19 -06:00

lib.h

Move stream data from TCB to task group structure.

2013-01-26 22:25:21 +00:00

math.h

Change double_t to double in rint. Add rintf and rintl while we are at it

2014-06-28 10:14:29 -06:00

mm.h

With these fixes, the kernel build is basically functional (but there is more to be done)

2013-03-09 01:27:42 +00:00

mmcsd.h

Created new directories to hold SPI-related files

2013-07-01 08:11:54 -06:00

mqueue.h

Use uint16_t vs uint8_t in the message queue structure if the max message size is > 128

2014-02-18 14:14:51 -06:00

page.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

poff.h

Fix some cloned errors in SAM GPIO interrupt setup

2014-07-07 15:54:37 -06:00

progmem.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

pthread.h

Header file clean-up

2012-07-17 03:58:11 +00:00

pwm.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

regex.h

Header file clean-up

2012-07-17 03:58:11 +00:00

rtc.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

rwbuffer.h

Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL

2014-07-11 16:19:17 -06:00

sched.h

Make sure that the Z16F build still builds and runs

2014-01-01 10:29:44 -06:00

scsi.h

Header file clean-up

2012-07-17 03:58:11 +00:00

sdio.h

Nucleo F401RE: Remove PX4 cruft that can in with the port

2014-04-22 12:18:08 -06:00

spawn.h

Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h

2013-01-18 01:52:42 +00:00

stdarg.h

Add a generic GCC stdarg.h header file

2012-07-08 14:50:43 +00:00

streams.h

Add seekable standard streams

2014-06-14 16:19:42 -06:00

time.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

timer.h

Timer driver updates from Bob Doiron

2014-05-05 14:40:19 -06:00

tree.h

Fix error in tree.h

2014-06-02 13:44:44 -06:00

userspace.h

Add kernel/user memalign functions. Not fully integrated

2013-08-20 13:04:49 -06:00

vt100.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00

watchdog.h

SAM3/4: Add watchdog timer support. From Bob Doisin

2014-04-21 19:12:02 -06:00

wqueue.h

More trailing whilespace removal

2014-04-13 14:32:20 -06:00