sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0c28094059
nuttx/wireless/bluetooth/bt_netdev.c
Xiang Xiao d5689e070b net/arp: Remove nuttx/net/arp.h 
1.move ARPHRD_ETHER to netinet/arp.h
1.move arp_entry_s to net/arp/arp.h
2.move arp_input to nuttx/net/netdev.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-16 22:10:59 +02:00

1325 lines
37 KiB
C
Raw Blame History

/****************************************************************************
* wireless/bluetooth/bt_netdev.c
* Network stack interface
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <arpa/inet.h>
#include <nuttx/spinlock.h>
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include <nuttx/wqueue.h>
#include <nuttx/mm/iob.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/radiodev.h>
#include <nuttx/net/bluetooth.h>
#include <nuttx/net/sixlowpan.h>
#include <nuttx/wireless/bluetooth/bt_core.h>
#include <netpacket/bluetooth.h>
#include "bt_hcicore.h"
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
#include "bt_l2cap.h"
#include "bt_conn.h"
#endif
#include "bt_ioctl.h"
#if defined(CONFIG_NET_6LOWPAN) || defined(CONFIG_NET_BLUETOOTH)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* If processing is not done at the interrupt level, then work queue support
* is required.
*/
#if !defined(CONFIG_SCHED_WORKQUEUE)
# error Work queue support is required in this configuration (CONFIG_SCHED_WORKQUEUE)
#endif
/* Frame size */
#if BLUETOOTH_MAX_FRAMELEN > CONFIG_IOB_BUFSIZE
# error CONFIG_IOB_BUFSIZE to small for max Bluetooth frame
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* This is our private version of the MAC callback structure */
struct btnet_callback_s
{
/* This holds the information visible to the MAC layer */
FAR struct btnet_driver_s *bc_priv; /* Our priv data */
};
/* The btnet_driver_s encapsulates all state information for a single
* Bluetooth device interface.
*/
struct btnet_driver_s
{
/* This holds the information visible to the NuttX network */
struct radio_driver_s bd_dev; /* Interface understood by the network */
/* Cast compatible with struct btnet_driver_s */
/* For internal use by this driver */
bool bd_bifup; /* true:ifup false:ifdown */
struct work_s bd_pollwork; /* Defer poll work to the work queue */
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
struct bt_conn_cb_s bd_hcicb; /* HCI connection status callbacks */
struct bt_l2cap_chan_s bd_l2capcb; /* L2CAP status callbacks */
#else
struct bt_hci_cb_s bd_hcicb; /* HCI RAW packet callbacks */
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Utility functions ********************************************************/
static int btnet_advertise(FAR struct net_driver_s *netdev);
static inline void btnet_netmask(FAR struct net_driver_s *netdev);
/* Bluetooth callback functions *********************************************/
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
/* L2CAP callbacks */
static void btnet_l2cap_connected(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid);
static void btnet_l2cap_disconnected(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid);
static void btnet_l2cap_encrypt_change(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid);
static void btnet_l2cap_receive(FAR struct bt_conn_s *conn,
FAR struct bt_buf_s *buf, FAR void *context, uint16_t cid);
/* HCI callbacks */
static void btnet_hci_connected(FAR struct bt_conn_s *conn,
FAR void *context);
static void btnet_hci_disconnected(FAR struct bt_conn_s *conn,
FAR void *context);
#else
static void btnet_hci_received(FAR struct bt_buf_s *buf, FAR void *context);
#endif
/* Network interface support ************************************************/
/* Common TX logic */
static int btnet_txpoll_callback(FAR struct net_driver_s *netdev);
/* NuttX callback functions */
static int btnet_ifup(FAR struct net_driver_s *netdev);
static int btnet_ifdown(FAR struct net_driver_s *netdev);
static void btnet_txavail_work(FAR void *arg);
static int btnet_txavail(FAR struct net_driver_s *netdev);
#ifdef CONFIG_NET_MCASTGROUP
static int btnet_addmac(FAR struct net_driver_s *netdev,
FAR const uint8_t *mac);
static int btnet_rmmac(FAR struct net_driver_s *netdev,
FAR const uint8_t *mac);
#endif
static int btnet_get_mhrlen(FAR struct radio_driver_s *netdev,
FAR const void *meta);
static int btnet_req_data(FAR struct radio_driver_s *netdev,
FAR const void *meta, FAR struct iob_s *framelist);
static int btnet_properties(FAR struct radio_driver_s *netdev,
FAR struct radiodev_properties_s *properties);
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
static int btnet_req_l2cap_data(FAR struct btnet_driver_s *priv,
FAR struct bluetooth_frame_meta_s *meta,
FAR struct iob_s *framelist);
#endif
static int btnet_req_hci_data(FAR struct btnet_driver_s *priv,
FAR struct bluetooth_frame_meta_s *meta,
FAR struct iob_s *framelist);
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_NET_6LOWPAN
static struct sixlowpan_reassbuf_s g_iobuffer;
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: btnet_advertise
*
* Description:
* Advertise the MAC and IPv6 address for this node.
*
* Creates a MAC-based IP address from the 6-byte address address assigned
* to the device.
*
* 128 112 96 80 64 48 32 16
* ---- ---- ---- ---- ---- ---- ---- ----
* fe80 0000 0000 0000 0200 xxxx xxxx xxxx
*
****************************************************************************/
static int btnet_advertise(FAR struct net_driver_s *netdev)
{
FAR uint8_t *addr;
DEBUGASSERT(netdev != NULL && netdev->d_private != NULL);
/* Get the 6-byte local address from the device.
*
* REVISIT: The use of the g_btdev global restricts the implementation to
* a single Bluetooth device.
*/
addr = g_btdev.bdaddr.val;
/* Set the MAC address using 6-byte local address from the device. */
BLUETOOTH_ADDRCOPY(netdev->d_mac.radio.nv_addr, addr);
netdev->d_mac.radio.nv_addrlen = BLUETOOTH_ADDRSIZE;
#ifdef CONFIG_NET_IPv6
/* Set the IP address based on the 6-byte address */
netdev->d_ipv6addr[0] = HTONS(0xfe80);
netdev->d_ipv6addr[1] = 0;
netdev->d_ipv6addr[2] = 0;
netdev->d_ipv6addr[3] = 0;
netdev->d_ipv6addr[4] = HTONS(0x0200);
netdev->d_ipv6addr[5] = (uint16_t)addr[0] << 8 | (uint16_t)addr[1];
netdev->d_ipv6addr[6] = (uint16_t)addr[2] << 8 | (uint16_t)addr[3];
netdev->d_ipv6addr[7] = (uint16_t)addr[4] << 8 | (uint16_t)addr[5];
#endif
return OK;
}
/****************************************************************************
* Name: btnet_netmask
*
* Description:
* Create a netmask of a MAC-based IP address which is based on the 6-byte
* Bluetooth address.
*
* 128 112 96 80 64 48 32 16
* ---- ---- ---- ---- ---- ---- ---- ----
* fe80 0000 0000 0000 xxxx xxxx xxxx xxxx
*
****************************************************************************/
static inline void btnet_netmask(FAR struct net_driver_s *netdev)
{
#ifdef CONFIG_NET_IPv6
netdev->d_ipv6netmask[0] = 0xffff;
netdev->d_ipv6netmask[1] = 0xffff;
netdev->d_ipv6netmask[2] = 0xffff;
netdev->d_ipv6netmask[3] = 0xffff;
netdev->d_ipv6netmask[4] = 0;
netdev->d_ipv6netmask[5] = 0;
netdev->d_ipv6netmask[6] = 0;
netdev->d_ipv6netmask[7] = 0;
#endif
}
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
/****************************************************************************
* Name: btnet_hci_connect/disconnect/encrypt_change
*
* Description:
* There are callbacks that are involved by the core HCI layer when a
* change is detected in the connection status or encryption.
*
* Input Parameters:
* conn - The connection whose
*
* Returned Value:
* None
*
* Assumptions:
* No assumption should be made about the thread of execution that these
* are called from
*
****************************************************************************/
static void btnet_l2cap_connected(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid)
{
wlinfo("Connected\n");
#warning Missing logic
}
static void btnet_l2cap_disconnected(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid)
{
wlinfo("Disconnected\n");
#warning Missing logic
}
static void btnet_l2cap_encrypt_change(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid)
{
wlinfo("Encryption change\n");
#warning Missing logic
}
/****************************************************************************
* Name: btnet_l2cap_receive
*
* Description:
* Handle received frames forward by the Bluetooth L2CAP layer.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure. On success, the meta data and its contained iob will be
* freed. The meta data will be intact if this function returns a
* failure.
*
****************************************************************************/
static void btnet_l2cap_receive(FAR struct bt_conn_s *conn,
FAR struct bt_buf_s *buf,
FAR void *context, uint16_t cid)
{
FAR struct btnet_driver_s *priv;
FAR struct iob_s *frame;
struct bluetooth_frame_meta_s meta;
int ret = -ENODEV;
wlinfo("Received frame\n");
DEBUGASSERT(conn != NULL && buf != NULL && buf->frame != NULL &&
context != NULL && cid < UINT8_MAX);
/* Detach the IOB frame from the buffer structure */
frame = buf->frame;
buf->frame = NULL;
/* Ignore the frame if the network is not up */
priv = (FAR struct btnet_driver_s *)context;
if (!priv->bd_bifup)
{
wlwarn("WARNING: Dropped... Network is down\n");
goto drop;
}
/* Make sure that the size/offset data matches the buffer structure data.
* REVISIT: Wouldn't it be better to just have one copy rather than having
* to synchronize?
*/
frame->io_len = buf->len;
frame->io_pktlen = buf->len;
frame->io_offset = (unsigned int)
((uintptr_t)buf->data - (uintptr_t)frame->io_data);
DEBUGASSERT(frame->io_len <= CONFIG_IOB_BUFSIZE);
DEBUGASSERT(frame->io_offset < CONFIG_IOB_BUFSIZE);
/* Construct the frame meta data.
* REVISIT: Where do we get the channel number?
*/
BLUETOOTH_ADDRCOPY(meta.bm_raddr.val, conn->src.val);
meta.bm_channel = cid;
/* Transfer the frame to the network logic */
net_lock();
#ifdef CONFIG_NET_BLUETOOTH
/* Invoke the PF_BLUETOOTH tap first. If the frame matches
* with a connected PF_BLUETOOTH socket, it will take the
* frame and return success.
*/
ret = bluetooth_input(&priv->bd_dev, frame, (FAR void *)&meta);
#endif
#ifdef CONFIG_NET_6LOWPAN
if (ret < 0)
{
/* If the frame is not a 6LoWPAN frame, then thefirst byte at the
* io_offset should be a valid IPHC header.
*/
if ((frame->io_data[frame->io_offset] &
SIXLOWPAN_DISPATCH_NALP_MASK) == SIXLOWPAN_DISPATCH_NALP)
{
wlwarn("WARNING: Dropped... Not a 6LoWPAN frame: %02x\n",
frame->io_data[frame->io_offset]);
ret = -EINVAL;
}
else
{
/* Make sure the our single packet buffer is attached */
priv->bd_dev.r_dev.d_buf = g_iobuffer.rb_buf;
/* And give the packet to 6LoWPAN */
ret = sixlowpan_input(&priv->bd_dev, frame, (FAR void *)&meta);
}
}
#endif
drop:
/* Handle errors */
if (ret < 0)
{
iob_free(frame);
/* Increment statistics */
NETDEV_RXDROPPED(&priv->bd_dev.r_dev);
}
else
{
/* Increment statistics */
NETDEV_RXPACKETS(&priv->bd_dev.r_dev);
NETDEV_RXIPV6(&priv->bd_dev.r_dev);
}
/* Release our reference on the buffer */
bt_buf_release(buf);
net_unlock();
}
/****************************************************************************
* Name: btnet_hci_connect/disconnect
*
* Description:
* There are callbacks that are involved by the core HCI layer when a
* change is detected in the connection status.
*
* Input Parameters:
* conn - The connection whose
*
* Returned Value:
* None
*
* Assumptions:
* No assumption should be made about the thread of execution that these
* are called from
*
****************************************************************************/
static void btnet_hci_connected(FAR struct bt_conn_s *conn,
FAR void *context)
{
wlinfo("Connected\n");
#warning Missing logic
}
static void btnet_hci_disconnected(FAR struct bt_conn_s *conn,
FAR void *context)
{
wlinfo("Disconnected\n");
#warning Missing logic
}
#else
/****************************************************************************
* Name: btnet_hci_received
*
* Description:
* This callback is called from the RX queue handling when an HCI
* packet is received from controller.
*
* Input Parameters:
* buf - The packet
*
* Returned Value:
* None
*
* Assumptions:
* No assumption should be made about the thread of execution that these
* are called from
*
****************************************************************************/
static void btnet_hci_received(FAR struct bt_buf_s *buf, FAR void *context)
{
FAR struct btnet_driver_s *priv;
FAR struct iob_s *frame;
struct bluetooth_frame_meta_s meta;
int ret = -ENODEV;
wlinfo("Received frame\n");
DEBUGASSERT(buf != NULL && buf->frame != NULL);
/* Detach the IOB frame from the buffer structure */
frame = buf->frame;
buf->frame = NULL;
net_lock();
/* Ignore the frame if the network is not up */
priv = (FAR struct btnet_driver_s *)context;
if (!priv->bd_bifup)
{
wlwarn("WARNING: Dropped... Network is down\n");
goto drop;
}
/* Make sure that the size/offset data matches the buffer structure data. */
DEBUGASSERT(frame->io_offset == BLUETOOTH_H4_HDRLEN);
/* Rearrange IOB to consider H4 header */
frame->io_len = buf->len + frame->io_offset;
frame->io_pktlen = buf->len + frame->io_offset;
frame->io_offset = 0;
DEBUGASSERT(frame->io_len <= CONFIG_IOB_BUFSIZE);
/* Write H4 header */
switch (buf->type)
{
case BT_EVT:
frame->io_data[0] = HCI_EVENT_PKT;
break;
case BT_ACL_IN:
frame->io_data[0] = HCI_ACLDATA_PKT;
break;
default:
wlerr("Bad HCI type: %i\n", buf->type);
goto drop;
break;
}
/* Construct the frame meta data.
*/
meta.bm_channel = HCI_CHANNEL_RAW;
meta.bm_proto = BTPROTO_HCI;
/* Transfer the frame to the network logic */
#ifdef CONFIG_NET_BLUETOOTH
/* Invoke the PF_BLUETOOTH tap first. If the frame matches
* with a connected PF_BLUETOOTH socket, it will take the
* frame and return success.
*/
ret = bluetooth_input(&priv->bd_dev, frame, (FAR void *)&meta);
#endif
drop:
/* Handle errors */
if (ret < 0)
{
iob_free(frame);
/* Increment statistics */
NETDEV_RXDROPPED(&priv->bd_dev.r_dev);
}
else
{
/* Increment statistics */
NETDEV_RXPACKETS(&priv->bd_dev.r_dev);
NETDEV_RXIPV6(&priv->bd_dev.r_dev);
}
/* Release our reference on the buffer */
net_unlock();
}
#endif
/****************************************************************************
* Name: btnet_txpoll_callback
*
* Description:
* The transmitter is available, check if the network has any outgoing
* packets ready to send. This is a callback from devif_poll().
* devif_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static int btnet_txpoll_callback(FAR struct net_driver_s *netdev)
{
/* If zero is returned, the polling will continue until all connections
* have been examined.
*/
return 0;
}
/****************************************************************************
* Name: btnet_ifup
*
* Description:
* NuttX Callback: Bring up the Bluetooth interface when an IP address
* is provided
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int btnet_ifup(FAR struct net_driver_s *netdev)
{
FAR struct btnet_driver_s *priv =
(FAR struct btnet_driver_s *)netdev->d_private;
int ret;
/* Set the IP address based on the addressing assigned to the node */
ret = btnet_advertise(netdev);
if (ret >= 0)
{
#ifdef CONFIG_NET_IPv6
wlinfo("Bringing up: IP %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
netdev->d_ipv6addr[0], netdev->d_ipv6addr[1],
netdev->d_ipv6addr[2], netdev->d_ipv6addr[3],
netdev->d_ipv6addr[4], netdev->d_ipv6addr[5],
netdev->d_ipv6addr[6], netdev->d_ipv6addr[7]);
wlinfo(" ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->d_mac.radio.nv_addr[0], netdev->d_mac.radio.nv_addr[1],
netdev->d_mac.radio.nv_addr[2], netdev->d_mac.radio.nv_addr[3],
netdev->d_mac.radio.nv_addr[4], netdev->d_mac.radio.nv_addr[5]);
#else
wlinfo("Bringing up: %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->d_mac.radio.nv_addr[0], netdev->d_mac.radio.nv_addr[1],
netdev->d_mac.radio.nv_addr[2], netdev->d_mac.radio.nv_addr[3],
netdev->d_mac.radio.nv_addr[4], netdev->d_mac.radio.nv_addr[5]);
#endif
/* The interface is now up */
priv->bd_bifup = true;
ret = OK;
}
return ret;
}
/****************************************************************************
* Name: btnet_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int btnet_ifdown(FAR struct net_driver_s *netdev)
{
FAR struct btnet_driver_s *priv =
(FAR struct btnet_driver_s *)netdev->d_private;
irqstate_t flags;
/* Disable interruption */
flags = spin_lock_irqsave(NULL);
/* Put the EMAC in its reset, non-operational state. This should be
* a known configuration that will guarantee the btnet_ifup() always
* successfully brings the interface back up.
*/
/* Mark the device "down" */
priv->bd_bifup = false;
spin_unlock_irqrestore(NULL, flags);
return OK;
}
/****************************************************************************
* Name: btnet_txavail_work
*
* Description:
* Perform an out-of-cycle poll on the worker thread.
*
* Input Parameters:
* arg - Reference to the NuttX driver state structure (cast to void*)
*
* Returned Value:
* None
*
* Assumptions:
* Called on the higher priority worker thread.
*
****************************************************************************/
static void btnet_txavail_work(FAR void *arg)
{
FAR struct btnet_driver_s *priv = (FAR struct btnet_driver_s *)arg;
wlinfo("ifup=%u\n", priv->bd_bifup);
/* Lock the network and serialize driver operations if necessary.
* NOTE: Serialization is only required in the case where the driver work
* is performed on an LP worker thread and where more than one LP worker
* thread has been configured.
*/
net_lock();
/* Ignore the notification if the interface is not yet up */
if (priv->bd_bifup)
{
#ifdef CONFIG_NET_6LOWPAN
/* Make sure the our single packet buffer is attached */
priv->bd_dev.r_dev.d_buf = g_iobuffer.rb_buf;
#endif
/* Then poll the network for new XMIT data */
devif_poll(&priv->bd_dev.r_dev, btnet_txpoll_callback);
}
net_unlock();
}
/****************************************************************************
* Name: btnet_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int btnet_txavail(FAR struct net_driver_s *netdev)
{
FAR struct btnet_driver_s *priv =
(FAR struct btnet_driver_s *)netdev->d_private;
wlinfo("Available=%u\n", work_available(&priv->bd_pollwork));
/* Is our single work structure available? It may not be if there are
* pending interrupt actions and we will have to ignore the Tx
* availability action.
*/
if (work_available(&priv->bd_pollwork))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(LPWORK, &priv->bd_pollwork, btnet_txavail_work, priv, 0);
}
return OK;
}
/****************************************************************************
* Name: btnet_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_MCASTGROUP
static int btnet_addmac(FAR struct net_driver_s *netdev,
FAR const uint8_t *mac)
{
/* Add the MAC address to the hardware multicast routing table.
* Not used with Bluetooth.
*/
return -ENOSYS;
}
#endif
/****************************************************************************
* Name: btnet_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware
* multicast address filtering
*
* Input Parameters:
* netdev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_MCASTGROUP
static int btnet_rmmac(FAR struct net_driver_s *netdev,
FAR const uint8_t *mac)
{
/* Remove the MAC address from the hardware multicast routing table
* Not used with Bluetooth.
*/
return -ENOSYS;
}
#endif
/****************************************************************************
* Name: btnet_get_mhrlen
*
* Description:
* Calculate the MAC header length given the frame meta-data.
*
* Input Parameters:
* netdev - The networkd device that will mediate the MAC interface
* meta - Obfuscated meta-data structure needed to create the radio
* MAC header
*
* Returned Value:
* A non-negative MAC header length is returned on success; a negated
* errno value is returned on any failure.
*
****************************************************************************/
static int btnet_get_mhrlen(FAR struct radio_driver_s *netdev,
FAR const void *meta)
{
const struct bluetooth_frame_meta_s *btmeta = meta;
if (btmeta->bm_proto == BTPROTO_HCI)
{
/* the net device only requires the H4 header, the rest is already
* part of the packet
*/
return BLUETOOTH_H4_HDRLEN;
}
else if (btmeta->bm_proto == BTPROTO_L2CAP)
{
/* Report the complete header size, since H4 + ACL + L2CAP header
* will not be part of the packet
*/
/* TODO: correct? */
return BLUETOOTH_MAX_HDRLEN;
}
return BLUETOOTH_MAX_HDRLEN;
}
/****************************************************************************
* Name: btnet_req_data
*
* Description:
* Requests the transfer of a list of frames to the MAC.
*
* Input Parameters:
* netdev - The networkd device that will mediate the MAC interface
* meta - Obfuscated metadata structure needed to create the radio
* MAC header
* framelist - Head of a list of frames to be transferred.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int btnet_req_data(FAR struct radio_driver_s *netdev,
FAR const void *meta, FAR struct iob_s *framelist)
{
FAR struct btnet_driver_s *priv;
FAR struct bluetooth_frame_meta_s *btmeta;
priv = (FAR struct btnet_driver_s *)netdev;
btmeta = (FAR struct bluetooth_frame_meta_s *)meta;
wlinfo("Received framelist\n");
DEBUGASSERT(priv != NULL && meta != NULL && framelist != NULL);
if (btmeta->bm_proto == BTPROTO_HCI)
{
return btnet_req_hci_data(priv, btmeta, framelist);
}
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
else if (btmeta->bm_proto == BTPROTO_L2CAP)
{
return btnet_req_l2cap_data(priv, btmeta, framelist);
}
#endif
else
{
return -EOPNOTSUPP;
}
return OK;
}
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
/****************************************************************************
* Name: btnet_req_l2cap_data
*
* Description:
* Requests the transfer of a list of L2CAP frames to the MAC.
*
* Input Parameters:
* priv - Bluetooth network device
* btmeta - Bluetooth frame metadata
* framelist - Head of a list of L2CAP frames to be transferred.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int btnet_req_l2cap_data(FAR struct btnet_driver_s *priv,
FAR struct bluetooth_frame_meta_s *btmeta,
FAR struct iob_s *framelist)
{
FAR struct bt_conn_s *conn;
bt_addr_le_t peer;
FAR struct iob_s *iob;
FAR struct bt_buf_s *buf;
UNUSED(priv);
/* Create a connection structure for this peer if one does not already
* exist.
*
* Assumptions to REVISIT:
*
* 1. Role is Master (see bt_conn_create_le())
* 2. Address type is BT_ADDR_LE_PUBLIC (vs. BT_ADDR_LE_RANDOM)
*/
BLUETOOTH_ADDRCOPY(peer.val, btmeta->bm_raddr.val);
peer.type = BT_ADDR_LE_PUBLIC;
conn = bt_conn_create_le(&peer);
if (conn == NULL)
{
/* bt_conn_create_le() can fail if (1) the connection exists, but is
* in a bad state or (2) CONFIG_BLUETOOTH_MAX_CONN has been exceeded.
* Assume the latter.
*/
return -ENOMEM;
}
/* Add the incoming list of frames to the MAC's outgoing queue */
for (iob = framelist; iob != NULL; iob = framelist)
{
/* Increment statistics */
NETDEV_TXPACKETS(&priv->bd_dev.r_dev);
/* Remove the IOB from the queue */
framelist = iob->io_flink;
iob->io_flink = NULL;
DEBUGASSERT(iob->io_offset == BLUETOOTH_MAX_HDRLEN &&
iob->io_len >= BLUETOOTH_MAX_HDRLEN);
/* Allocate a buffer to contain the IOB */
buf = bt_buf_alloc(BT_ACL_OUT, iob, BLUETOOTH_MAX_HDRLEN);
if (buf == NULL)
{
wlerr("ERROR: Failed to allocate buffer container\n");
return -ENOMEM;
}
/* Transfer the frame to the Bluetooth stack. */
bt_l2cap_send(conn, (uint16_t)btmeta->bm_channel, buf);
NETDEV_TXDONE(&priv->bd_dev.r_dev);
}
return OK;
}
#endif
/****************************************************************************
* Name: btnet_req_hci_data
*
* Description:
* Requests the transfer of a list of HCI frames to the MAC.
*
* Input Parameters:
* priv - Bluetooth network device
* btmeta - Bluetooth frame metadata
* framelist - Head of a list of HCI frames to be transferred.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int btnet_req_hci_data(FAR struct btnet_driver_s *priv,
FAR struct bluetooth_frame_meta_s *meta,
FAR struct iob_s *framelist)
{
FAR struct iob_s *iob;
FAR struct bt_buf_s *buf;
/* Add the incoming list of frames to the MAC's outgoing queue */
for (iob = framelist; iob != NULL; iob = framelist)
{
/* Increment statistics */
NETDEV_TXPACKETS(&priv->bd_dev.r_dev);
/* Remove the IOB from the queue */
framelist = iob->io_flink;
iob->io_flink = NULL;
DEBUGASSERT(iob->io_offset == BLUETOOTH_H4_HDRLEN &&
iob->io_len >= BLUETOOTH_H4_HDRLEN);
/* Allocate a buffer to contain the IOB */
switch (iob->io_data[iob->io_offset])
{
case HCI_ACLDATA_PKT:
iob->io_offset += 1;
buf = bt_buf_alloc(BT_ACL_OUT, iob, 0);
break;
case HCI_COMMAND_PKT:
iob->io_offset += 1;
buf = bt_buf_alloc(BT_CMD, iob, 0);
break;
case HCI_EVENT_PKT:
iob->io_offset += 1;
buf = bt_buf_alloc(BT_EVT, iob, 0);
break;
default:
return -EOPNOTSUPP;
break;
}
if (buf == NULL)
{
wlerr("ERROR: Failed to allocate buffer container\n");
return -ENOMEM;
}
bt_send(g_btdev.btdev, buf);
bt_buf_release(buf);
/* Transfer the frame to the Bluetooth stack. */
NETDEV_TXDONE(&priv->bd_dev.r_dev);
}
return OK;
}
/****************************************************************************
* Name: btnet_properties
*
* Description:
* Different packet radios may have different properties. If there are
* multiple packet radios, then those properties have to be queried at
* run time. This information is provided to the 6LoWPAN network via the
* following structure.
*
* Input Parameters:
* netdev - The network device to be queried
* properties - Location where radio properties will be returned.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int btnet_properties(FAR struct radio_driver_s *netdev,
FAR struct radiodev_properties_s *properties)
{
DEBUGASSERT(netdev != NULL && properties != NULL);
memset(properties, 0, sizeof(struct radiodev_properties_s));
/* General */
properties->sp_addrlen = BLUETOOTH_ADDRSIZE; /* Length of an address */
properties->sp_framelen = BLUETOOTH_MAX_FRAMELEN; /* Fixed frame length */
/* Multicast, multicast, and star hub node addresses not supported */
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: bt_netdev_register
*
* Description:
* Register a network driver to access the Bluetooth layer using a 6LoWPAN
* IPv6 or AF_BLUETOOTH socket.
*
* Input Parameters:
* btdev - An instance of the low-level drivers interface structure.
*
* Returned Value:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int bt_netdev_register(FAR struct bt_driver_s *btdev)
{
FAR struct btnet_driver_s *priv;
FAR struct radio_driver_s *radio;
FAR struct net_driver_s *netdev;
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
FAR struct bt_conn_cb_s *hcicb;
FAR struct bt_l2cap_chan_s *l2capcb;
#else
FAR struct bt_hci_cb_s *hcicb;
#endif
int ret;
/* Get the interface structure associated with this interface number. */
priv = (FAR struct btnet_driver_s *)
kmm_zalloc(sizeof(struct btnet_driver_s));
if (priv == NULL)
{
nerr("ERROR: Failed to allocate the device structure\n");
return -ENOMEM;
}
/* Initialize the driver structure */
radio = &priv->bd_dev;
netdev = &radio->r_dev;
netdev->d_ifup = btnet_ifup; /* I/F up (new IP address) callback */
netdev->d_ifdown = btnet_ifdown; /* I/F down callback */
netdev->d_txavail = btnet_txavail; /* New TX data callback */
#ifdef CONFIG_NET_MCASTGROUP
netdev->d_addmac = btnet_addmac; /* Add multicast MAC address */
netdev->d_rmmac = btnet_rmmac; /* Remove multicast MAC address */
#endif
#if defined(CONFIG_NETDEV_IOCTL) && defined(CONFIG_WIRELESS_BLUETOOTH_HOST)
netdev->d_ioctl = btnet_ioctl; /* Handle network IOCTL commands */
#endif
netdev->d_private = priv; /* Used to recover private state from netdev */
/* Connection status change callbacks */
#ifdef CONFIG_WIRELESS_BLUETOOTH_HOST
hcicb = &priv->bd_hcicb;
hcicb->context = priv;
hcicb->connected = btnet_hci_connected;
hcicb->disconnected = btnet_hci_disconnected;
bt_conn_cb_register(hcicb);
/* L2CAP status change callbacks */
l2capcb = &priv->bd_l2capcb;
l2capcb->context = priv;
l2capcb->connected = btnet_l2cap_connected;
l2capcb->disconnected = btnet_l2cap_disconnected;
l2capcb->encrypt_change = btnet_l2cap_encrypt_change;
l2capcb->receive = btnet_l2cap_receive;
bt_l2cap_chan_default(l2capcb);
#else
hcicb = &priv->bd_hcicb;
hcicb->context = priv;
hcicb->received = btnet_hci_received;
bt_hci_cb_register(hcicb);
#endif
/* Set the network mask. */
btnet_netmask(netdev);
/* Initialize the Network frame-related callbacks */
radio->r_get_mhrlen = btnet_get_mhrlen; /* Get MAC header length */
radio->r_req_data = btnet_req_data; /* Enqueue frame for transmission */
radio->r_properties = btnet_properties; /* Return radio properties */
btdev->receive = bt_receive;
/* Associate the driver in with the Bluetooth stack.
*
* REVISIT: We will eventually need to remember which Bluetooth device
* we a serving. Not a problem now because only a single BLE device is
* supported.
*/
ret = bt_driver_register(btdev);
if (ret < 0)
{
nerr("ERROR: bt_driver_register() failed: %d\n", ret);
goto errout;
}
/* Initialize the Bluetooth stack.
*
* REVISIT: This function should be called only once after all BLE
* drivers are registered. Not a problem now because only a single
* BLE device is supported.
*/
ret = bt_initialize();
if (ret < 0)
{
nerr("ERROR: bt_initialize() failed: %d\n", ret);
goto errout;
}
/* Put the interface in the down state. */
btnet_ifdown(netdev);
#ifdef CONFIG_NET_6LOWPAN
/* Make sure the our single packet buffer is attached.
* We must do this before registering the device since, once the device is
* registered, a packet may be attempted to be forwarded and require the
* buffer.
*/
priv->bd_dev.r_dev.d_buf = g_iobuffer.rb_buf;
#endif
/* Register the network device with the OS so that socket IOCTLs can be
* performed
*/
ret = netdev_register(&priv->bd_dev.r_dev, NET_LL_BLUETOOTH);
if (ret >= 0)
{
return OK;
}
nerr("ERROR: netdev_register() failed: %d\n", ret);
errout:
/* Free memory and return the error */
kmm_free(priv);
return ret;
}
#endif /* CONFIG_NET && CONFIG_NET_skeleton */
Reference in New Issue View Git Blame Copy Permalink