nuttx/graphics/nxbe/nxbe.h
patacongo d68afa9783 Add rectinside(), vectsubtract(), visible()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1381 42af7a65-404d-4744-a932-0658087f49c3
2008-12-01 18:51:48 +00:00

460 lines
16 KiB
C

/****************************************************************************
* graphics/nxbe/nxbe.h
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __GRAPHICS_NXBE_NXBE_H
#define __GRAPHICS_NXBE_NXBE_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <nuttx/fb.h>
#include <nuttx/nxglib.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_NX_NPLANES
# define CONFIG_NX_NPLANES 1 /* Max number of color planes supported */
#endif
#ifndef CONFIG_NX_NCOLORS
# define CONFIG_NX_NCOLORS 256
#endif
/* These are the values for the clipping order provided to nx_clipper */
#define NX_CLIPORDER_TLRB (0) /* Top-left-right-bottom */
#define NX_CLIPORDER_TRLB (1) /* Top-right-left-bottom */
#define NX_CLIPORDER_BLRT (2) /* Bottom-left-right-top */
#define NX_CLIPORDER_BRLT (3) /* Bottom-right-left-top */
#define NX_CLIPORDER_DEFAULT NX_CLIPORDER_TLRB
/****************************************************************************
* Public Types
****************************************************************************/
/* Rasterization ************************************************************/
/* A tiny vtable of raster operation function pointers. The types of the
* function points must match the rasterizer types exported by nxglib
*/
struct nxbe_plane_s
{
/* Raster operation callbacks for this bits-per-pixel value */
void (*fillrectangle)(FAR struct fb_planeinfo_s *pinfo,
FAR const struct nxgl_rect_s *rect,
nxgl_mxpixel_t color);
void (*filltrapezoid)(FAR struct fb_planeinfo_s *pinfo,
FAR const struct nxgl_trapezoid_s *trap,
FAR const struct nxgl_rect_s *bounds,
nxgl_mxpixel_t color);
void (*moverectangle)(FAR struct fb_planeinfo_s *pinfo,
FAR const struct nxgl_rect_s *rect,
FAR struct nxgl_point_s *offset);
void (*copyrectangle)(FAR struct fb_planeinfo_s *pinfo,
FAR const struct nxgl_rect_s *dest,
FAR const void *src,
FAR const struct nxgl_point_s *origin,
unsigned int srcstride);
/* Framebuffer plane info describing destination video plane */
struct fb_planeinfo_s pinfo;
};
/* Clipping *****************************************************************/
/* Clipping callback functions called nxbe_clipper for each visible and
* obscured region of a rectangle within a window.
*/
struct nxbe_clipops_s
{
void (*visible)(FAR struct nxbe_clipops_s *cops,
FAR struct nxbe_plane_s *plane,
FAR const struct nxgl_rect_s *rect);
void (*obscured)(FAR struct nxbe_clipops_s *cops,
FAR struct nxbe_plane_s *plane,
FAR const struct nxgl_rect_s *rect);
};
/* Windows ******************************************************************/
/* This structure represents one window. */
struct nxbe_state_s;
struct nxfe_conn_s;
struct nxbe_window_s
{
/* State information */
FAR struct nxbe_state_s *be; /* The back-end state structure */
#ifdef CONFIG_NX_MULTIUSER
FAR struct nxfe_conn_s *conn; /* Connection to the window client */
#endif
FAR const struct nx_callback_s *cb; /* Event handling callbacks */
/* The following links provide the window's vertical position using a
* singly linked list.
*/
FAR struct nxbe_window_s *above; /* The window "above" this window */
FAR struct nxbe_window_s *below; /* The window "below this one */
/* Window geometry */
struct nxgl_rect_s bounds; /* The bounding rectangle of window */
struct nxgl_point_s origin; /* The position of the top-left corner of the window */
/* Client state information this is provide in window callbacks */
FAR void *arg;
};
/* Back-end state ***********************************************************/
/* This structure describes the overall back-end window state */
struct nxbe_state_s
{
/* The window list (with the background window always at the bottom) */
FAR struct nxbe_window_s *topwnd; /* The window at the top of the display */
struct nxbe_window_s bkgd; /* The background window is always at the bottom */
/* At present, only a solid colored background is supported for refills. The
* following provides the background color. It would be nice to support
* background bitmap images as well.
*/
nxgl_mxpixel_t bgcolor[CONFIG_NX_NPLANES];
/* vinfo describes the video controller and plane[n].pinfo describes color
* plane 'n' supported by the video controller. Most common color models
* fit in one plane, but this array provides future support for hardware
* with planar YUV types with 3 or 4 color planes.
*/
struct fb_videoinfo_s vinfo;
/* Rasterizing functions selected to match the BPP reported in pinfo[] */
struct nxbe_plane_s plane[CONFIG_NX_NPLANES];
};
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nxbe_colormap
*
* Description:
* Set the harware color map to the palette expected by NX
*
****************************************************************************/
#if CONFIG_FB_CMAP
EXTERN int nxbe_colormap(FAR struct fb_vtable_s *fb);
#endif
/****************************************************************************
* Name: nx_fbconfigure
*
* Description:
* Configure the back end state structure based on information from the
* framebuffer driver
*
****************************************************************************/
EXTERN int nxbe_fbconfigure(FAR struct fb_vtable_s *fb,
FAR struct nxbe_state_s *be);
/****************************************************************************
* Name: nxbe_closewindow
*
* Description:
* Close an existing window
*
* Input Parameters:
* wnd - The window to be closed (and deallocated)
*
* Return:
* None
*
****************************************************************************/
EXTERN void nxbe_closewindow(struct nxbe_window_s *wnd);
/****************************************************************************
* Name: nxbe_setposition
*
* Descripton:
* This function checks for intersections and redraws the display after
* a change in the position of a window.
*
****************************************************************************/
EXTERN void nxbe_setposition(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_point_s *pos);
/****************************************************************************
* Name: nxbe_setsize
*
* Descripton:
* This function checks for intersections and redraws the display after
* a change in the size of a window.
*
****************************************************************************/
EXTERN void nxbe_setsize(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *size);
/****************************************************************************
* Name: nxbe_raise
*
* Description:
* Bring the specified window to the top of the display.
*
****************************************************************************/
EXTERN void nxbe_raise(FAR struct nxbe_window_s *wnd);
/****************************************************************************
* Name: nxbe_lower
*
* Description:
* Lower the specified window to the bottom of the display.
*
****************************************************************************/
EXTERN void nxbe_lower(FAR struct nxbe_window_s *wnd);
/****************************************************************************
* Name: nxbe_fill
*
* Description:
* Fill the specified rectangle in the window with the specified color
*
* Input Parameters:
* wnd - The window structure reference
* rect - The location to be filled
* col - The color to use in the fill
*
* Return:
* None
*
****************************************************************************/
EXTERN void nxbe_fill(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *rect,
nxgl_mxpixel_t color[CONFIG_NX_NPLANES]);
/****************************************************************************
* Name: nxbe_filltrapezoid
*
* Description:
* Fill the specified rectangle in the window with the specified color
*
* Input Parameters:
* wnd - The window structure reference
* rect - The location to be filled
* col - The color to use in the fill
*
* Return:
* None
*
****************************************************************************/
EXTERN void nxbe_filltrapezoid(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_trapezoid_s *trap,
nxgl_mxpixel_t color[CONFIG_NX_NPLANES]);
/****************************************************************************
* Name: nxbe_move
*
* Description:
* Move a rectangular region within the window
*
* Input Parameters:
* wnd - The window within which the move is to be done
* rect - Describes the rectangular region to move
* offset - The offset to move the region
*
* Return:
* None
*
****************************************************************************/
EXTERN void nxbe_move(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *rect,
FAR const struct nxgl_point_s *offset);
/****************************************************************************
* Name: nxbe_bitmap
*
* Description:
* Copy a rectangular region of a larger image into the rectangle in the
* specified window.
*
* Input Parameters:
* wnd - The window that will receive the bitmap image
* dest - Describes the rectangular on the display that will receive the
* the bit map.
* src - The start of the source image.
* origin - The origin of the upper, left-most corner of the full bitmap.
* Both dest and origin are in window coordinates, however, origin
* may lie outside of the display.
* stride - The width of the full source image in pixels.
*
* Return:
* OK on success; ERROR on failure with errno set appropriately
*
****************************************************************************/
EXTERN void nxbe_bitmap(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *dest,
FAR const void *src[CONFIG_NX_NPLANES],
FAR const struct nxgl_point_s *origin,
unsigned int stride);
/****************************************************************************
* Name: nxbe_redraw
*
* Descripton:
* Re-draw the visible portions of the rectangular region for the
* specified window
*
****************************************************************************/
EXTERN void nxbe_redraw(FAR struct nxbe_state_s *be,
FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *rect);
/****************************************************************************
* Name: nxbe_redrawbelow
*
* Descripton:
* Re-draw the visible portions of the rectangular region for all windows
* below (and including) the specified window. This function is called
* whenever a window is closed, moved, lowered or re-sized in order to
* expose newly visible portions of lower windows.
*
****************************************************************************/
EXTERN void nxbe_redrawbelow(FAR struct nxbe_state_s *be,
FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *rect);
/****************************************************************************
* Name: nxbe_visible
*
* Descripton:
* Return true if the point, pt, in window wnd is visible. pt is in
* absolute screen coordinates
*
****************************************************************************/
EXTERN boolean nxbe_visible(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_point_s *pos);
/****************************************************************************
* Name: nxbe_clipper
*
* Descripton:
* Perform flexible clipping operations. Callbacks are executed for
* each oscured and visible portions of the window.
*
* Input Parameters:
* wnd - The window to be clipped.
* rect - The region of concern within the window
* order - Specifies the order to process the parts of the non-intersecting
* sub-rectangles.
* cops - The callbacks to handle obscured and visible parts of the
* sub-rectangles.
* plane - The raster operations to be used by the callback functions.
* These may vary with different color formats.
*
* Returned Value:
* None
*
****************************************************************************/
EXTERN void nxbe_clipper(FAR struct nxbe_window_s *wnd,
FAR const struct nxgl_rect_s *dest, ubyte order,
FAR struct nxbe_clipops_s *cops,
FAR struct nxbe_plane_s *plane);
/****************************************************************************
* Name: nxbe_clipnull
*
* Descripton:
* The do-nothing clipping callback function
*
****************************************************************************/
EXTERN void nxbe_clipnull(FAR struct nxbe_clipops_s *cops,
FAR struct nxbe_plane_s *plane,
FAR const struct nxgl_rect_s *rect);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __GRAPHICS_NXBE_NXBE_H */