sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0c3cb0cb66
nuttx/drivers/wireless/spirit/lib/spirit_radio.c
Alin Jerpelea e1d361eddf drivers: nxstyle fixes 
Fixes for errors reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-05 07:31:45 -05:00

4785 lines
129 KiB
C
Raw Blame History

/******************************************************************************
* drivers/wireless/spirit/lib/spirit_radio.c
* This file provides all the low level API to manage Analog and Digital radio
* part of SPIRIT.
*
* Copyright(c) 2015 STMicroelectronics
* Author: VMA division - AMS
* Version 3.2.2 08-July-2015
*
* Adapted for NuttX by:
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
/******************************************************************************
* Included Files
******************************************************************************/
#include <sys/types.h>
#include <stdint.h>
#include <unistd.h>
#include <math.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/signal.h>
#include "spirit_config.h"
#include "spirit_types.h"
#include "spirit_management.h"
#include "spirit_calibration.h"
#include "spirit_radio.h"
#include "spirit_spi.h"
/******************************************************************************
* Pre-processor Definitions
******************************************************************************/
#define XTAL_FLAG(xtalFrequency) \
(xtalFrequency >= 25e6) ? XTAL_FLAG_26_MHz : XTAL_FLAG_24_MHz
#define ROUND(a) \
(((a - (uint32_t)a) > 0.5) ? (uint32_t)a + 1 : (uint32_t)a)
/* Returns the absolute value. */
#define S_ABS(a) ((a) > 0 ? (a) : -(a))
/******************************************************************************
* Private Data
******************************************************************************/
/* Factor is: B/2 used in the formula for SYNTH word calculation */
static const uint8_t g_vectc_bhalf[4] =
{
(HIGH_BAND_FACTOR / 2),
(MIDDLE_BAND_FACTOR / 2),
(LOW_BAND_FACTOR / 2),
(VERY_LOW_BAND_FACTOR / 2)
};
/* BS value to write in the SYNT0 register according to the selected band */
static const uint8_t g_vectc_bandval[4] =
{
SYNT0_BS_6, SYNT0_BS_12, SYNT0_BS_16, SYNT0_BS_32
};
/* It represents the available channel bandwidth times 10 for 26 MHz xtal.
* NOTE: The channel bandwidth for others xtal frequencies can be computed
* since this table multiplying the current table by a factor
* xtal_frequency/26e6.
*/
static const uint16_t g_vectn_bandwidth[90] =
{
8001, 7951, 7684, 7368, 7051, 6709, 6423, 5867, 5414,
4509, 4259, 4032, 3808, 3621, 3417, 3254, 2945, 2703,
2247, 2124, 2015, 1900, 1807, 1706, 1624, 1471, 1350,
1123, 1062, 1005, 950, 903, 853, 812, 735, 675,
561, 530, 502, 474, 451, 426, 406, 367, 337,
280, 265, 251, 237, 226, 213, 203, 184, 169,
140, 133, 126, 119, 113, 106, 101, 92, 84,
70, 66, 63, 59, 56, 53, 51, 46, 42,
35, 33, 31, 30, 28, 27, 25, 23, 21,
18, 17, 16, 15, 14, 13, 13, 12, 11
};
/* These values are used to interpolate the power curves. Interpolation
* curves are linear in the following 3 regions:
*
* - reg value: 1 to 13 (up region)
* - reg value: 13 to 40 (mid region)
* - reg value: 41 to 90 (low region)
*
* power_reg = m*power_dBm + q
*
* For each band the order is: {m-up, q-up, m-mid, q-mid, m-low, q-low}.
*
* NOTE: The power interpolation curves have been extracted by
* measurements done on the divisional evaluation boards.
*/
static const float g_power_factors[5][6] =
{
{-2.11, 25.66, -2.11, 25.66, -2.00, 31.28}, /* 915 */
{-2.04, 23.45, -2.04, 23.45, -1.95, 27.66}, /* 868 */
{-3.48, 38.45, -1.89, 27.66, -1.92, 30.23}, /* 433 */
{-3.27, 35.43, -1.80, 26.31, -1.89, 29.61}, /* 315 */
{-4.18, 50.66, -1.80, 30.04, -1.86, 32.22}, /* 169 */
};
/* It represents the available VCO frequencies */
static const uint16_t g_vectn_vcofreq[16] =
{
4644, 4708, 4772, 4836, 4902, 4966, 5030, 5095,
5161, 5232, 5303, 5375, 5448, 5519, 5592, 5663
};
/******************************************************************************
* Public Functions
******************************************************************************/
/******************************************************************************
* Name: spirit_radio_initialize
*
* Description:
* Initializes the SPIRIT analog and digital radio part according to the
* specified parameters in the radioinit.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* radioinit - Pointer to a struct radio_init_s that contains the
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_initialize(FAR struct spirit_library_s *spirit,
FAR const struct radio_init_s *radioinit)
{
float ifoff;
int32_t offset;
int16_t fcoffset;
uint8_t anaoffset;
uint8_t digregs[4];
uint8_t anaregs[8];
uint8_t drm;
uint8_t dre;
uint8_t fdevm;
uint8_t fdeve;
uint8_t bwm;
uint8_t bwe;
uint8_t regval;
uint8_t value;
int ret;
/* Workaround for Vtune */
value = 0xa0;
ret = spirit_reg_write(spirit, 0x9f, &value, 1);
if (ret < 0)
{
return ret;
}
/* Calculates the offset respect to RF frequency and according to xtal_ppm
* parameter: (xtal_ppm*FBase)/10^6
*/
offset = (int32_t)(((float)radioinit->foffset * radioinit->base_frequency) /
PPM_FACTOR);
/* Check the parameters */
DEBUGASSERT(IS_FREQUENCY_BAND(radioinit->base_frequency));
DEBUGASSERT(IS_MODULATION_SELECTED(radioinit->modselect));
DEBUGASSERT(IS_DATARATE(radioinit->datarate));
DEBUGASSERT(IS_FREQUENCY_OFFSET(offset, spirit->xtal_frequency));
DEBUGASSERT(IS_CHANNEL_SPACE(radioinit->chspace, spirit->xtal_frequency));
DEBUGASSERT(IS_F_DEV(radioinit->freqdev, spirit->xtal_frequency));
/* Make sure that we are in the READY state */
ret = spirit_waitstatus(spirit, MC_STATE_READY, 5);
if (ret < 0)
{
wlerr("ERROR: Failed to go to READY state: %d\n", ret);
return ret;
}
/* Disable the digital, ADC, SMPS reference clock divider if fXO > 24MHz or
* fXO < 26MHz
*/
ret = spirit_command(spirit, COMMAND_STANDBY);
if (ret < 0)
{
return ret;
}
/* Delay for state transition */
nxsig_usleep(100);
/* Wait for the device to enter STANDBY */
ret = spirit_waitstatus(spirit, MC_STATE_STANDBY, 5);
if (ret < 0)
{
wlerr("ERROR: Failed to go to STANDBY state: %d\n", ret);
return ret;
}
if (spirit->xtal_frequency < DOUBLE_XTAL_THR)
{
ret = spirit_radio_enable_digdivider(spirit, S_DISABLE);
DEBUGASSERT(IS_CH_BW(radioinit->bandwidth, spirit->xtal_frequency));
}
else
{
ret = spirit_radio_enable_digdivider(spirit, S_ENABLE);
DEBUGASSERT(IS_CH_BW(radioinit->bandwidth,
(spirit->xtal_frequency >> 1)));
}
if (ret < 0)
{
return ret;
}
/* Go to READY state */
ret = spirit_command(spirit, COMMAND_READY);
if (ret < 0)
{
return ret;
}
/* Delay for state transition */
nxsig_usleep(100);
/* Make sure that the device becomes READY */
ret = spirit_waitstatus(spirit, MC_STATE_READY, 5);
if (ret < 0)
{
wlerr("ERROR: Failed to go to READY state: %d\n", ret);
return ret;
}
/* Calculates the FC_OFFSET parameter and cast as signed int: offset =
* (Fxtal/2^18)*FC_OFFSET
*/
fcoffset = (int16_t)(((float)offset * FBASE_DIVIDER) /
spirit->xtal_frequency);
anaregs[2] = (uint8_t)((((uint16_t)fcoffset) >> 8) & 0x0f);
anaregs[3] = (uint8_t)fcoffset;
/* Calculates the channel space factor */
anaregs[0] = ((uint32_t)radioinit->chspace << 9) /
(spirit->xtal_frequency >> 6) + 1;
spirit_management_initcommstate(spirit, radioinit->base_frequency);
/* 2nd order DEM algorithm enabling */
ret = spirit_reg_read(spirit, 0xa3, &regval, 1);
if (ret < 0)
{
return ret;
}
regval &= ~0x02;
ret = spirit_reg_write(spirit, 0xa3, &regval, 1);
if (ret < 0)
{
return ret;
}
/* Check the channel center frequency is in one of the possible range */
DEBUGASSERT(IS_FREQUENCY_BAND((radioinit->base_frequency +
((fcoffset * spirit->xtal_frequency) /
FBASE_DIVIDER) +
radioinit->chspace * radioinit->chnum)));
/* Calculates the datarate mantissa and exponent */
ret = spirit_radio_convert_datarate(spirit, radioinit->datarate,
&drm, &dre);
if (ret < 0)
{
return ret;
}
digregs[0] = (uint8_t)(drm);
digregs[1] = (uint8_t)(radioinit->modselect | dre);
/* Read the fdev register to preserve the clock recovery algo bit */
ret = spirit_reg_read(spirit, 0x1c, &regval, 1);
if (ret < 0)
{
return ret;
}
/* Calculates the frequency deviation mantissa and exponent */
ret = spirit_radio_convert_freqdev(spirit, radioinit->freqdev,
&fdevm, &fdeve);
if (ret < 0)
{
return ret;
}
digregs[2] = (uint8_t)((fdeve << 4) | (regval & 0x08) | fdevm);
/* Calculates the channel filter mantissa and exponent */
ret = spirit_radio_convert_chbandwidth(spirit, radioinit->bandwidth,
&bwm, &bwe);
if (ret < 0)
{
return ret;
}
digregs[3] = (uint8_t)((bwm << 4) | bwe);
ifoff = (3.0 * 480140) / (spirit->xtal_frequency >> 12) - 64;
anaoffset = ROUND(ifoff);
if (spirit->xtal_frequency < DOUBLE_XTAL_THR)
{
/* if offset digital is the same in case of single xtal */
anaregs[1] = anaoffset;
}
else
{
ifoff = (3.0 * 480140) / (spirit->xtal_frequency >> 13) - 64;
/* ... otherwise recompute it */
anaregs[1] = ROUND(ifoff);
}
#if 0
if (spirit->xtal_frequency == 24000000)
{
anaoffset = 0xb6;
anaregs[1] = 0xb6;
}
if (spirit->xtal_frequency == 25000000)
{
anaoffset = 0xac;
anaregs[1] = 0xac;
}
if (spirit->xtal_frequency == 26000000)
{
anaoffset = 0xa3;
anaregs[1] = 0xa3;
}
if (spirit->xtal_frequency == 48000000)
{
anaoffset = 0x3b;
anaregs[1] = 0xb6;
}
if (spirit->xtal_frequency == 50000000)
{
anaoffset = 0x36;
anaregs[1] = 0xac;
}
if (spirit->xtal_frequency == 52000000)
{
anaoffset = 0x31;
anaregs[1] = 0xa3;
}
#endif
ret = spirit_reg_write(spirit, IF_OFFSET_ANA_BASE, &anaoffset, 1);
if (ret < 0)
{
return ret;
}
/* Set Xtal configuration */
if (spirit->xtal_frequency > DOUBLE_XTAL_THR)
{
enum xtal_flag_e xtlflag = XTAL_FLAG((spirit->xtal_frequency / 2));
ret = spirit_radio_set_xtalflag(spirit, xtlflag);
}
else
{
enum xtal_flag_e xtlflag = XTAL_FLAG(spirit->xtal_frequency);
ret = spirit_radio_set_xtalflag(spirit, xtlflag);
}
if (ret < 0)
{
return ret;
}
/* Sets the channel number in the corresponding register */
ret = spirit_reg_write(spirit, CHNUM_BASE, &radioinit->chnum, 1);
if (ret < 0)
{
return ret;
}
/* Configures the Analog Radio registers */
ret = spirit_reg_write(spirit, CHSPACE_BASE, anaregs, 4);
if (ret < 0)
{
return ret;
}
/* Configures the Digital Radio registers */
ret = spirit_reg_write(spirit, MOD1_BASE, digregs, 4);
if (ret < 0)
{
return ret;
}
/* Enable the freeze option of the AFC on the SYNC word */
ret = spirit_radio_afcfreezeonsync(spirit, S_ENABLE);
if (ret < 0)
{
return ret;
}
/* Set the IQC correction optimal value */
anaregs[0] = 0x80;
anaregs[1] = 0xe3;
ret = spirit_reg_write(spirit, 0x99, anaregs, 2);
if (ret < 0)
{
return ret;
}
return spirit_radio_set_basefrequency(spirit, radioinit->base_frequency);
}
/******************************************************************************
* Name: spirit_radio_get_setup
*
* Description:
* Returns the SPIRIT analog and digital radio structure according to the
* registers value.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* radioinit pointer to a struct radio_init_s thatcontains the
* configuration information for the analog radio part of
* SPIRIT.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on any
* failure.
*
******************************************************************************/
int spirit_radio_get_setup(FAR struct spirit_library_s *spirit,
FAR struct radio_init_s *radioinit)
{
uint32_t synthword;
uint16_t xtaloff;
int16_t fcoffset;
uint8_t anaregs[8];
uint8_t digregs[4];
uint8_t refdiv;
uint8_t fdevm;
uint8_t fdeve;
uint8_t bwm;
uint8_t bwe;
uint8_t divider;
enum spirit_bandselect_e band;
int ret;
#if 0
/* Get the RF board version */
enum spirit_version_e spirit_version = spirit_general_get_version(spirit);
#endif
/* Read the Analog Radio registers */
ret = spirit_reg_read(spirit, SYNT3_BASE, anaregs, 8);
if (ret < 0)
{
return ret;
}
/* Read the Digital Radio registers */
ret = spirit_reg_read(spirit, MOD1_BASE, digregs, 4);
if (ret < 0)
{
return ret;
}
/* Get the operating band masking the Band selected field */
if ((anaregs[3] & 0x07) == SYNT0_BS_6)
{
band = HIGH_BAND;
}
else if ((anaregs[3] & 0x07) == SYNT0_BS_12)
{
band = MIDDLE_BAND;
}
else if ((anaregs[3] & 0x07) == SYNT0_BS_16)
{
band = LOW_BAND;
}
else if ((anaregs[3] & 0x07) == SYNT0_BS_32)
{
band = VERY_LOW_BAND;
}
else
{
uint8_t regval;
/* If it is another value, set it to a valid one in order to avoid access
* violation
*/
regval = (anaregs[3] & 0xf8) | SYNT0_BS_6;
ret = spirit_reg_write(spirit, SYNT0_BASE, &regval, 1);
if (ret < 0)
{
return ret;
}
band = HIGH_BAND;
}
/* Compute the synth word */
synthword = ((((uint32_t)(anaregs[0] & 0x1f)) << 21) +
(((uint32_t)(anaregs[1])) << 13) +
(((uint32_t)(anaregs[2])) << 5) +
(((uint32_t)(anaregs[3])) >> 3));
/* Calculate the frequency base */
refdiv = (uint8_t)spirit_radio_get_refdiv(spirit) + 1;
radioinit->base_frequency = (uint32_t)
round(synthword * (((double)spirit->xtal_frequency) /
(FBASE_DIVIDER * refdiv * g_vectc_bhalf[band])));
/* Calculate the Offset Factor */
xtaloff = (((uint16_t)anaregs[6] << 8) | (uint16_t)anaregs[7]);
/* If a negative number then convert the 12 bit 2-complement in a 16 bit
* number
*/
if ((xtaloff & 0x0800) != 0)
{
xtaloff = xtaloff | 0xf000;
}
else
{
xtaloff = xtaloff & 0x0fff;
}
fcoffset = (int16_t)xtaloff;
/* Calculate the frequency offset in ppm */
radioinit->foffset = (int16_t)
((uint32_t)fcoffset * spirit->xtal_frequency * PPM_FACTOR) /
((uint32_t)FBASE_DIVIDER * radioinit->base_frequency);
/* Channel space */
radioinit->chspace = anaregs[4] * (spirit->xtal_frequency >> 15);
/* Channel number */
radioinit->chnum = spirit_radio_get_channel(spirit);
/* Modulation select */
radioinit->modselect = (enum modulation_select_e)(digregs[1] & 0x70);
/* Get the frequency deviation for mantissa and exponent */
fdevm = digregs[2] & 0x07;
fdeve = (digregs[2] & 0xf0) >> 4;
/* Get the channel filter register for mantissa and exponent */
bwm = (digregs[3] & 0xf0) >> 4;
bwe = digregs[3] & 0x0f;
divider = spirit_radio_isenabled_digdivider(spirit);
/* Calculate the datarate */
radioinit->datarate =
((spirit->xtal_frequency >> (5 + divider)) *
(256 + digregs[0])) >> (23 - (digregs[1] & 0x0f));
/* Calculates the frequency deviation */
radioinit->freqdev = (uint32_t)
((float)spirit->xtal_frequency / (((uint32_t) 1) << 18) *
(uint32_t)((8.0 + fdevm) / 2 * (1 << fdeve)));
/* Get the channel filter bandwidth from the look-up table and return it */
radioinit->bandwidth = (uint32_t)
(100.0 * g_vectn_bandwidth[bwm + (bwe * 9)] *
((spirit->xtal_frequency >> divider) / 26e6));
return OK;
}
/******************************************************************************
* Name: spirit_radio_set_xtalflag
*
* Description:
* Sets the Xtal configuration in the ANA_FUNC_CONF0 register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* xtalflag - One of the possible value of the enum type xtal_flag_e.
* XTAL_FLAG_24_MHz: in case of 24 MHz crystal
* XTAL_FLAG_26_MHz: in case of 26 MHz crystal
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_set_xtalflag(FAR struct spirit_library_s *spirit,
enum xtal_flag_e xtalflag)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_XTAL_FLAG(xtalflag));
/* Read the ANA_FUNC_CONF_0 register */
ret = spirit_reg_read(spirit, ANA_FUNC_CONF0_BASE, &regval, 1);
if (ret >= 0)
{
if (xtalflag == XTAL_FLAG_26_MHz)
{
regval |= SELECT_24_26_MHZ_MASK;
}
else
{
regval &= (~SELECT_24_26_MHZ_MASK);
}
/* Sets the 24_26MHz_SELECT field in the ANA_FUNC_CONF_0 register */
ret = spirit_reg_write(spirit, ANA_FUNC_CONF0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_xtalflag
*
* Description:
* Returns the Xtal configuration in the ANA_FUNC_CONF0 register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* XtalFrequency Settled Xtal configuration.
*
******************************************************************************/
enum xtal_flag_e spirit_radio_get_xtalflag(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the Xtal configuration in the ANA_FUNC_CONF_0 register and return
* the value.
*/
spirit_reg_read(spirit, ANA_FUNC_CONF0_BASE, &regval, 1);
return (enum xtal_flag_e)((regval & 0x40) >> 6);
}
/******************************************************************************
* Name: spirit_radio_search_wcp
*
* Description:
* Returns the charge pump word for a given VCO frequency.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fc - Channel center frequency expressed in Hz. This parameter may
* be a value in one of the following ranges:
*
* High_Band: from 779 MHz to 915 MHz
* Middle Band: from 387 MHz to 470 MHz
* Low Band: from 300 MHz to 348 MHz
* Very low Band: from 150 MHz to 174 MHz
*
* Returned Value:
* Charge pump word.
*
******************************************************************************/
uint8_t spirit_radio_search_wcp(FAR struct spirit_library_s *spirit,
uint32_t fc)
{
uint32_t vcofreq;
uint8_t bfactor;
int8_t i;
/* Check the channel center frequency is in one of the possible range */
DEBUGASSERT(IS_FREQUENCY_BAND(fc));
/* Search the operating band */
if (IS_FREQUENCY_BAND_HIGH(fc))
{
bfactor = HIGH_BAND_FACTOR;
}
else if (IS_FREQUENCY_BAND_MIDDLE(fc))
{
bfactor = MIDDLE_BAND_FACTOR;
}
else if (IS_FREQUENCY_BAND_LOW(fc))
{
bfactor = LOW_BAND_FACTOR;
}
else
{
bfactor = VERY_LOW_BAND_FACTOR;
}
/* Calculates the VCO frequency VCOFreq = fc*B */
vcofreq = (fc / 1000000) * bfactor;
/* Search in the vco frequency array the charge pump word */
if (vcofreq >= g_vectn_vcofreq[15])
{
i = 15;
}
else
{
/* Search the value */
for (i = 0; i < 15 && vcofreq > g_vectn_vcofreq[i]; i++);
/* Be sure that it is the best approssimation */
if (i != 0 &&
g_vectn_vcofreq[i] - vcofreq > vcofreq - g_vectn_vcofreq[i - 1])
{
i--;
}
}
/* Return index */
return (i & 7);
}
/******************************************************************************
* Name: spirit_radio_get_synthword
*
* Description:
* Returns the synth word.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* 32-bit Synth word. Errors are not reported.
*
******************************************************************************/
uint32_t spirit_radio_get_synthword(FAR struct spirit_library_s *spirit)
{
uint8_t regvalues[4];
/* Read the SYNTH registers, build the synth word and return it */
spirit_reg_read(spirit, SYNT3_BASE, regvalues, 4);
return ((((uint32_t)(regvalues[0] & 0x1f)) << 21) +
(((uint32_t)(regvalues[1])) << 13) +
(((uint32_t)(regvalues[2])) << 5) +
(((uint32_t)(regvalues[3])) >> 3));
}
/******************************************************************************
* Name: spirit_radio_set_synthword
*
* Description:
* Sets the SYNTH registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* synthword - The synth word to write in the SYNTH[3:0] registers.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_set_synthword(FAR struct spirit_library_s *spirit,
uint32_t synthword)
{
uint8_t regvalues[4];
uint8_t synt0;
int ret;
/* Read the SYNT0 register */
ret = spirit_reg_read(spirit, SYNT0_BASE, &synt0, 1);
if (ret < 0)
{
return ret;
}
/* Mask the Band selected field */
synt0 &= 0x07;
/* Build the array for SYNTH registers */
regvalues[0] = (uint8_t)((synthword >> 21) & (0x0000001f));
regvalues[1] = (uint8_t)((synthword >> 13) & (0x000000ff));
regvalues[2] = (uint8_t)((synthword >> 5) & (0x000000ff));
regvalues[3] = (uint8_t)(((synthword & 0x0000001f) << 3) | synt0);
/* Write the synth word to the SYNTH registers */
ret = spirit_reg_write(spirit, SYNT3_BASE, regvalues, 4);
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_band
*
* Description:
* Sets the operating band.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* band - The band to set. This parameter can be one of following values:
* HIGH_BAND High_Band selected: from 779 MHz to 915 MHz
* MIDDLE_BAND: Middle Band selected: from 387 MHz to 470 MHz
* LOW_BAND: Low Band selected: from 300 MHz to 348 MHz
* VERY_LOW_BAND: Very low Band selected: from 150 MHz to 174 MHz
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_set_band(FAR struct spirit_library_s *spirit,
enum spirit_bandselect_e band)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_BAND_SELECTED(band));
/* Read the SYNT0 register */
ret = spirit_reg_read(spirit, SYNT0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the SYNTH[4;0] field and write the BS value */
regval &= 0xf8;
regval |= g_vectc_bandval[band];
/* Configures the SYNT0 register setting the operating band */
ret = spirit_reg_write(spirit, SYNT0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_band
*
* Description:
* Returns the operating band.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* BandSelect Settled band. This returned value may be one of the
* following values:
* HIGH_BAND High_Band selected: from 779 MHz to 915 MHz
* MIDDLE_BAND: Middle Band selected: from 387 MHz to 470 MHz
* LOW_BAND: Low Band selected: from 300 MHz to 348 MHz
* VERY_LOW_BAND: Very low Band selected: from 150 MHz to 174 MHz
*
******************************************************************************/
enum spirit_bandselect_e
spirit_radio_get_band(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the SYNT0 register */
spirit_reg_read(spirit, SYNT0_BASE, &regval, 1);
/* Mask the Band selected field */
if ((regval & 0x07) == SYNT0_BS_6)
{
return HIGH_BAND;
}
else if ((regval & 0x07) == SYNT0_BS_12)
{
return MIDDLE_BAND;
}
else if ((regval & 0x07) == SYNT0_BS_16)
{
return LOW_BAND;
}
else
{
return VERY_LOW_BAND;
}
}
/******************************************************************************
* Name: spirit_radio_set_channel
*
* Description:
* Sets the channel number.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* chnum the channel number.
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_channel(FAR struct spirit_library_s *spirit,
uint8_t chnum)
{
/* Write the CHNUM register */
return spirit_reg_write(spirit, CHNUM_BASE, &chnum, 1);
}
/******************************************************************************
* Name: spirit_radio_get_channel
*
* Description:
* Returns the actual channel number.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Actual channel number.
*
******************************************************************************/
uint8_t spirit_radio_get_channel(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the CHNUM register and return the value */
spirit_reg_read(spirit, CHNUM_BASE, &regval, 1);
return regval;
}
/******************************************************************************
* Name: spirit_radio_set_chspace
*
* Description:
* Sets the channel space factor in channel space register. The channel
* spacing step is computed as F_Xo/32768.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* chspace - The channel space expressed in Hz.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_chspace(FAR struct spirit_library_s *spirit,
uint32_t chspace)
{
uint8_t factor;
/* Round to the nearest integer */
factor = ((uint32_t)chspace * CHSPACE_DIVIDER) / spirit->xtal_frequency;
/* Write value into the register */
return spirit_reg_write(spirit, CHSPACE_BASE, &factor, 1);
}
/******************************************************************************
* Name: spirit_radio_get_chspace
*
* Description:
* Returns the channel space register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Channel space. The channel space is:
*
* CS = channel_space_factor x XtalFrequency/2^15
*
* where channel_space_factor is the CHSPACE register value.
*
******************************************************************************/
uint32_t spirit_radio_get_chspace(FAR struct spirit_library_s *spirit)
{
uint8_t factor;
/* Read the CHSPACE register, calculate the channel space and return it */
spirit_reg_read(spirit, CHSPACE_BASE, &factor, 1);
/* Compute the Hertz value and return it */
return ((factor * spirit->xtal_frequency) / CHSPACE_DIVIDER);
}
/******************************************************************************
* Name: spirit_radio_set_foffset_ppm
*
* Description:
* Sets the FC OFFSET register starting from xtal ppm value.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* xtaloffset - The xtal offset expressed in ppm.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on any
* failure.
*
******************************************************************************/
int spirit_radio_set_foffset_ppm(FAR struct spirit_library_s *spirit,
int16_t xtaloffset)
{
enum spirit_bandselect_e band;
uint32_t synthword;
uint32_t fbase;
int32_t offset;
int16_t fcoffset;
uint8_t refdiv;
uint8_t tmp[2];
/* Get the synth word */
synthword = spirit_radio_get_synthword(spirit);
/* Get the operating band */
band = spirit_radio_get_band(spirit);
/* Calculate the frequency base */
refdiv = (uint8_t)spirit_radio_get_refdiv(spirit) + 1;
fbase = synthword * (spirit->xtal_frequency /
(g_vectc_bhalf[band] * refdiv) /
FBASE_DIVIDER);
/* Calculate the offset respect to RF frequency and according to xtal_ppm
* parameter.
*/
offset = (int32_t)(((float)xtaloffset * fbase) / PPM_FACTOR);
/* Check the Offset is in the correct range */
DEBUGASSERT(IS_FREQUENCY_OFFSET(offset, spirit->xtal_frequency));
/* Calculate the FC_OFFSET value to write in the corresponding register */
fcoffset = (int16_t)(((float)offset * FBASE_DIVIDER) /
spirit->xtal_frequency);
/* Build the array related to the FC_OFFSET_1 and FC_OFFSET_0 register */
tmp[0] = (uint8_t)((((uint16_t) fcoffset) >> 8) & 0x0f);
tmp[1] = (uint8_t)fcoffset;
/* Write the FC_OFFSET registers */
return spirit_reg_write(spirit, FC_OFFSET1_BASE, tmp, 2);
}
/******************************************************************************
* Name: spirit_radio_set_foffset_hz
*
* Description:
* Sets the FC OFFSET register starting from frequency offset expressed in
* Hz.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* foffset - Frequency offset expressed in Hz as signed word.
*
* Returned Value:
* Zero (OK) returned on success; a negated errno value is returned on any
* failure.
*
******************************************************************************/
int spirit_radio_set_foffset_hz(FAR struct spirit_library_s *spirit,
int32_t foffset)
{
uint8_t tmp[2];
int16_t offset;
/* Check that the Offset is in the correct range */
DEBUGASSERT(IS_FREQUENCY_OFFSET(foffset, spirit->xtal_frequency));
/* Calculates the offset value to write in the FC_OFFSET register */
offset = (int16_t)(((float)foffset * FBASE_DIVIDER) /
spirit->xtal_frequency);
/* Build the array related to the FC_OFFSET_1 and FC_OFFSET_0 register */
tmp[0] = (uint8_t)((((uint16_t) offset) >> 8) & 0x0f);
tmp[1] = (uint8_t)offset;
/* Write the FC_OFFSET registers */
return spirit_reg_write(spirit, FC_OFFSET1_BASE, tmp, 2);
}
/******************************************************************************
* Name: spirit_radio_get_foffset
*
* Description:
* Returns the actual frequency offset.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Frequency offset expressed in Hz as signed word.
*
******************************************************************************/
int32_t spirit_radio_get_foffset(FAR struct spirit_library_s *spirit)
{
uint16_t offtmp;
int16_t fcoffset;
uint8_t tmp[2];
/* Read the FC_OFFSET registers */
spirit_reg_read(spirit, FC_OFFSET1_BASE, tmp, 2);
/* Calculates the Offset Factor */
offtmp = (((uint16_t)tmp[0] << 8) + (uint16_t)tmp[1]);
if ((offtmp & 0x0800) != 0)
{
offtmp |= 0xf000;
}
else
{
offtmp &= 0x0fff;
}
fcoffset = *((int16_t *)(&offtmp));
/* Calculates the frequency offset and return it */
return ((int32_t)(fcoffset * spirit->xtal_frequency) / FBASE_DIVIDER);
}
/******************************************************************************
* Name: spirit_radio_set_basefrequency
*
* Description:
* Sets the Synth word and the Band Select register according to desired
* base carrier frequency. In this API the Xtal configuration is read out
* from the corresponding register. The user shall fix it before call this
* API.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fbase - The base carrier frequency expressed in Hz as unsigned word.
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_set_basefrequency(FAR struct spirit_library_s *spirit,
uint32_t fbase)
{
int32_t foffset;
uint32_t synthword;
uint32_t chspace;
uint32_t fc;
uint8_t anaregs[4];
uint8_t refdiv;
uint8_t band;
uint8_t wcp;
uint8_t chnum;
int ret;
/* Check the parameter */
DEBUGASSERT(IS_FREQUENCY_BAND(fbase));
/* Search the operating band */
if (IS_FREQUENCY_BAND_HIGH(fbase))
{
band = HIGH_BAND;
}
else if (IS_FREQUENCY_BAND_MIDDLE(fbase))
{
band = MIDDLE_BAND;
}
else if (IS_FREQUENCY_BAND_LOW(fbase))
{
band = LOW_BAND;
}
else
{
band = VERY_LOW_BAND;
}
foffset = spirit_radio_get_foffset(spirit);
chspace = spirit_radio_get_chspace(spirit);
chnum = spirit_radio_get_channel(spirit);
/* Calculates the channel center frequency */
fc = fbase + foffset + chspace * chnum;
/* Read the reference divider */
refdiv = (uint8_t)spirit_radio_get_refdiv(spirit) + 1;
/* Selects the VCO */
switch (band)
{
case VERY_LOW_BAND:
if (fc < 161281250)
{
spirit_calib_select_vco(spirit, VCO_L);
}
else
{
spirit_calib_select_vco(spirit, VCO_H);
}
break;
case LOW_BAND:
if (fc < 322562500)
{
spirit_calib_select_vco(spirit, VCO_L);
}
else
{
spirit_calib_select_vco(spirit, VCO_H);
}
break;
case MIDDLE_BAND:
if (fc < 430083334)
{
spirit_calib_select_vco(spirit, VCO_L);
}
else
{
spirit_calib_select_vco(spirit, VCO_H);
}
break;
case HIGH_BAND:
if (fc < 860166667)
{
spirit_calib_select_vco(spirit, VCO_L);
}
else
{
spirit_calib_select_vco(spirit, VCO_H);
}
}
/* Search the VCO charge pump word and set the corresponding register */
wcp = spirit_radio_search_wcp(spirit, fc);
synthword = (uint32_t)(fbase * g_vectc_bhalf[band] *
(((double)(FBASE_DIVIDER * refdiv)) /
spirit->xtal_frequency));
/* Build the array of registers values for the analog part */
anaregs[0] = (uint8_t)(((synthword >> 21) & 0x0000001f) | (wcp << 5));
anaregs[1] = (uint8_t)((synthword >> 13) & 0x000000ff);
anaregs[2] = (uint8_t)((synthword >> 5) & 0x000000ff);
anaregs[3] = (uint8_t)(((synthword & 0x0000001f) << 3) |
g_vectc_bandval[band]);
/* Configures the needed Analog Radio registers */
ret = spirit_reg_write(spirit, SYNT3_BASE, anaregs, 4);
if (ret < 0)
{
return ret;
}
/* Should be perform the VCO calibration WA? */
if (spirit->vcocalib == S_ENABLE)
{
return spirit_managment_wavco_calibration(spirit);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_enable_wavco_calibration
*
* Description:
* Enable/disable the VCO calibration WA at the end of
* spirit_radio_set_basefrequency()
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* S_ENABLE or S_DISABLE the WA procedure.
*
* Returned Value:
* None.
*
******************************************************************************/
void spirit_radio_enable_wavco_calibration(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
spirit->vcocalib = newstate;
}
/******************************************************************************
* Name: spirit_radio_get_basefrequency
*
* Description:
* Returns the base carrier frequency.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Base carrier frequency expressed in Hz as unsigned word.
*
******************************************************************************/
uint32_t spirit_radio_get_basefrequency(FAR struct spirit_library_s *spirit)
{
enum spirit_bandselect_e band;
uint32_t synthword;
uint8_t refdiv;
/* Read the synth word */
synthword = spirit_radio_get_synthword(spirit);
/* Read the operating band */
band = spirit_radio_get_band(spirit);
refdiv = (uint8_t)spirit_radio_get_refdiv(spirit) + 1;
/* Calculates the frequency base and return it */
return (uint32_t) round(synthword * (((double)spirit->xtal_frequency) /
(FBASE_DIVIDER * refdiv *
g_vectc_bhalf[band])));
}
/******************************************************************************
* Name: spirit_radio_get_centerfreq
*
* Description:
* Returns the actual channel center frequency.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Actual channel center frequency expressed in Hz.
*
******************************************************************************/
uint32_t spirit_radio_get_centerfreq(FAR struct spirit_library_s *spirit)
{
int32_t offset;
uint8_t channel;
uint32_t fbase;
uint32_t chspace;
/* Get the frequency base */
fbase = spirit_radio_get_basefrequency(spirit);
/* Get the frequency offset */
offset = spirit_radio_get_foffset(spirit);
/* Get the channel space */
chspace = spirit_radio_get_chspace(spirit);
/* Get the channel number */
channel = spirit_radio_get_channel(spirit);
/* Calculate the channel center frequency and return it */
return (uint32_t)(fbase + offset + (uint32_t)(chspace * channel));
}
/******************************************************************************
* Name: spirit_radio_convert_datarate
*
* Description:
* Returns the mantissa and exponent, whose value used in the datarate
* formula will give the datarate value closer to the given datarate.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* datarate - datarate expressed in bps. This parameter ranging between
* 100 and 500000.
* pcm - pointer to the returned mantissa value.
* pce - pointer to the returned exponent value.
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_convert_datarate(FAR struct spirit_library_s *spirit,
uint32_t datarate, FAR uint8_t *pcm,
FAR uint8_t *pce)
{
int16_t intermediate[3];
uint16_t delta;
uint8_t mantissa;
uint8_t divider = 0;
int8_t i = 15;
uint8_t j;
volatile bool find = false;
/* Check the parameters */
DEBUGASSERT(IS_DATARATE(datarate));
divider = (uint8_t)spirit_radio_isenabled_digdivider(spirit);
/* Search in the datarate array the exponent value */
while (!find && i >= 0)
{
if (datarate >= (spirit->xtal_frequency >> (20 - i + divider)))
{
find = true;
}
else
{
i--;
}
}
i < 0 ? i = 0 : i;
*pce = i;
/* Calculates the mantissa value according to the datarate formula */
mantissa = (datarate * ((uint32_t)1 << (23 - i))) /
(spirit->xtal_frequency >> (5 + divider)) - 256;
/* Finds the mantissa value with less approximation */
for (j = 0; j < 3; j++)
{
if ((mantissa + j - 1))
{
intermediate[j] = datarate - (((256 + mantissa + j - 1) *
(spirit->xtal_frequency >> (5 + divider))) >>
(23 - i));
}
else
{
intermediate[j] = 0x7fff;
}
}
delta = 0xffff;
for (j = 0; j < 3; j++)
{
if (S_ABS(intermediate[j]) < delta)
{
delta = S_ABS(intermediate[j]);
*pcm = mantissa + j - 1;
}
}
return OK;
}
/******************************************************************************
* Name: spirit_radio_convert_chbandwidth
*
* Description:
* Returns the mantissa and exponent for a given bandwidth. Even if it is
* possible to pass as parameter any value in the below mentioned range, the
* API will search the closer value according to a fixed table of channel
* bandwidth values (@ref s_vectnBandwidth), as defined in the datasheet,
* returning the corresponding mantissa and exponent value.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* bandwidth - bandwidth expressed in Hz. This parameter ranging between
* 1100 and 800100.
* pcm - pointer to the returned mantissa value.
* pce - pointer to the returned exponent value.
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_convert_chbandwidth(FAR struct spirit_library_s *spirit,
uint32_t bandwidth, FAR uint8_t *pcm,
FAR uint8_t *pce)
{
uint32_t chfltfactor;
int16_t intermediate[3];
uint16_t delta;
uint8_t divider = 1;
int8_t tmp;
int8_t i;
int8_t j;
/* Search in the channel filter bandwidth table the exponent value */
if (spirit_radio_isenabled_digdivider(spirit) != S_DISABLE)
{
divider = 2;
}
else
{
divider = 1;
}
DEBUGASSERT(IS_CH_BW(bandwidth, spirit->xtal_frequency / divider));
chfltfactor = (spirit->xtal_frequency / divider) / 100;
for (i = 0;
i < 90 && (bandwidth < (uint32_t)((g_vectn_bandwidth[i] *
chfltfactor) / 2600));
i++);
if (i != 0)
{
/* Finds the mantissa value with less approximation */
tmp = i;
for (j = 0; j < 3; j++)
{
if (((tmp + j - 1) >= 0) || ((tmp + j - 1) <= 89))
{
intermediate[j] = bandwidth -
(uint32_t)((g_vectn_bandwidth[tmp + j - 1] *
chfltfactor) / 2600);
}
else
{
intermediate[j] = 0x7fff;
}
}
delta = 0xffff;
for (j = 0; j < 3; j++)
{
if (S_ABS(intermediate[j]) < delta)
{
delta = S_ABS(intermediate[j]);
i = tmp + j - 1;
}
}
}
*pce = (uint8_t)(i / 9);
*pcm = (uint8_t)(i % 9);
return OK;
}
/******************************************************************************
* Name: spirit_radio_convert_freqdev
*
* Description:
* Returns the mantissa and exponent, whose value used in the frequency
* deviation formula will give a frequency deviation value most closer to
* the given frequency deviation.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fdev - Frequency deviation expressed in Hz. This parameter can be a
* value in the range [F_Xo*8/2^18, F_Xo*7680/2^18].
* pcm - pointer to the returned mantissa value.
* pce - pointer to the returned exponent value.
*
* Returned Value:
* Error code: 0=no error, <0=error during calibration of VCO.
*
******************************************************************************/
int spirit_radio_convert_freqdev(FAR struct spirit_library_s *spirit,
uint32_t fdev, FAR uint8_t *pcm,
FAR uint8_t *pce)
{
uint32_t a;
uint32_t bp;
uint32_t b = 0;
uint8_t i;
float divtmp = (float)spirit->xtal_frequency / (((uint32_t) 1) << 18);
/* Check the parameters */
DEBUGASSERT(IS_F_DEV(fdev, spirit->xtal_frequency));
for (i = 0; i < 10; i++)
{
a = (uint32_t)(divtmp * (uint32_t)(7.5 * (1 << i)));
if (fdev < a)
{
break;
}
}
*pce = i;
for (i = 0; i < 8; i++)
{
bp = b;
b = (uint32_t)(divtmp * (uint32_t)((8.0 + i) / 2 * (1 << (*pce))));
if (fdev < b)
{
break;
}
}
if ((fdev - bp) < (b - fdev))
{
i--;
}
*pcm = i;
return OK;
}
/******************************************************************************
* Name: spirit_radio_set_datarate
*
* Description:
* Sets the datarate.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* datarate - Datarate expressed in bps. This value must be in the range
* [100 500000].
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_datarate(FAR struct spirit_library_s *spirit,
uint32_t datarate)
{
uint8_t regval[2];
uint8_t dre;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_DATARATE(datarate));
/* Calculate the datarate mantissa and exponent */
ret = spirit_radio_convert_datarate(spirit, datarate, &regval[0], &dre);
if (ret >= 0)
{
/* Read the MOD_O register */
spirit_reg_read(spirit, MOD0_BASE, &regval[1], 1);
/* Mask the other fields and set the datarate exponent */
regval[1] &= 0xf0;
regval[1] |= dre;
/* Write the Datarate registers */
ret = spirit_reg_write(spirit, MOD1_BASE, regval, 2);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_datarate
*
* Description:
* Returns the datarate.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Settled datarate expressed in bps.
*
******************************************************************************/
uint32_t spirit_radio_get_datarate(FAR struct spirit_library_s *spirit)
{
uint8_t regval[2];
uint8_t divider = 0;
/* Read the datarate registers for mantissa and exponent */
spirit_reg_read(spirit, MOD1_BASE, regval, 2);
/* Calculates the datarate */
divider = (uint8_t) spirit_radio_isenabled_digdivider(spirit);
return (((spirit->xtal_frequency >> (5 + divider)) *
(256 + regval[0])) >> (23 - (regval[1] & 0x0f)));
}
/******************************************************************************
* Name: spirit_radio_set_freqdev
*
* Description:
* Sets the frequency deviation.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fdev - Frequency deviation expressed in Hz. Be sure that this value
* is in the correct range [F_Xo*8/2^18, F_Xo*7680/2^18] Hz.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_freqdev(FAR struct spirit_library_s *spirit,
uint32_t fdev)
{
uint8_t fdevm;
uint8_t fdeve;
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_F_DEV(fdev, spirit->xtal_frequency));
/* Calculates the frequency deviation mantissa and exponent */
ret = spirit_radio_convert_freqdev(spirit, fdev, &fdevm, &fdeve);
if (ret < 0)
{
return ret;
}
/* Read the FDEV0 register */
ret = spirit_reg_read(spirit, FDEV0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the other fields and set the frequency deviation mantissa and
* exponent
*/
regval &= 0x08;
regval |= ((fdeve << 4) | (fdevm));
/* Write the Frequency deviation register */
ret = spirit_reg_write(spirit, FDEV0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_freqdev
*
* Description:
* Returns the frequency deviation.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Frequency deviation value expressed in Hz.
* This value will be in the range [F_Xo*8/2^18, F_Xo*7680/2^18] Hz.
*
******************************************************************************/
uint32_t spirit_radio_get_freqdev(FAR struct spirit_library_s *spirit)
{
uint8_t fdevm;
uint8_t fdeve;
uint8_t regval;
/* Read the frequency deviation register for mantissa and exponent */
spirit_reg_read(spirit, FDEV0_BASE, &regval, 1);
fdevm = regval & 0x07;
fdeve = (regval & 0xf0) >> 4;
/* Calculates the frequency deviation and return it */
return (uint32_t)((float)spirit->xtal_frequency / (((uint32_t) 1) << 18) *
(uint32_t)((8.0 + fdevm) / 2 * (1 << fdeve)));
}
/******************************************************************************
* Name: spirit_radio_set_chfilterbw
*
* Description:
* Sets the channel filter bandwidth.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* bandwidth - Channel filter bandwidth expressed in Hz. This parameter
* must be in the range [1100 800100]. The API will search the
* closest value according to a fixed table of channel bandwidth
* values, as defined in the datasheet. To verify the settled
* channel bandwidth it is possible to use the
* spirit_radio_get_chfilterbw() API.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_chfilterbw(FAR struct spirit_library_s *spirit,
uint32_t bandwidth)
{
uint8_t bwm;
uint8_t bwe;
uint8_t regval;
int ret;
/* Search in the channel filter bandwidth table the exponent value */
if (spirit_radio_isenabled_digdivider(spirit))
{
DEBUGASSERT(IS_CH_BW(bandwidth, (spirit->xtal_frequency / 2)));
}
else
{
DEBUGASSERT(IS_CH_BW(bandwidth, (spirit->xtal_frequency)));
}
/* Calculates the channel bandwidth mantissa and exponent */
ret = spirit_radio_convert_chbandwidth(spirit, bandwidth, &bwm, &bwe);
if (ret >= 0)
{
regval = (bwm << 4) | (bwe);
/* Write the Channel filter register */
ret = spirit_reg_write(spirit, CHFLT_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_chfilterbw
*
* Description:
* Returns the channel filter bandwidth.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Channel filter bandwidth expressed in Hz.
*
******************************************************************************/
uint32_t spirit_radio_get_chfilterbw(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
uint8_t bwm;
uint8_t bwe;
/* Read the channel filter register for mantissa and exponent */
spirit_reg_read(spirit, CHFLT_BASE, &regval, 1);
bwm = (regval & 0xf0) >> 4;
bwe = regval & 0x0f;
/* Read the channel filter bandwidth from the look-up table and return it */
return (uint32_t)(100.0 * g_vectn_bandwidth[bwm + (bwe * 9)] *
spirit->xtal_frequency / 26e6);
}
/******************************************************************************
* Name: spirit_radio_set_modulation
*
* Description:
* Sets the modulation type.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* modulation - Modulation to set.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_modulation(FAR struct spirit_library_s *spirit,
enum modulation_select_e modulation)
{
uint8_t regval;
/* Check the parameters */
DEBUGASSERT(IS_MODULATION_SELECTED(modulation));
/* Read the modulation register */
spirit_reg_read(spirit, MOD0_BASE, &regval, 1);
/* Mask the other fields and set the modulation type */
regval &= 0x8f;
regval |= modulation;
/* Write the modulation register */
return spirit_reg_write(spirit, MOD0_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_modulation
*
* Description:
* Returns the modulation type used.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Settled modulation type.
*
******************************************************************************/
enum modulation_select_e
spirit_radio_get_modulation(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the modulation register MOD0 */
spirit_reg_read(spirit, MOD0_BASE, &regval, 1);
/* Return the modulation type */
return (enum modulation_select_e)(regval & 0x70);
}
/******************************************************************************
* Name: spirit_radio_enable_cwtxmode
*
* Description:
* Enables or Disables the Continuous Wave transmit mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for power ramping. This parameter can be: S_ENABLE
* or S_DISABLE .
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_enable_cwtxmode(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the modulation register MOD0 and mask the CW field */
ret = spirit_reg_read(spirit, MOD0_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= MOD0_CW;
}
else
{
regval &= (~MOD0_CW);
}
/* Write the new value to the MOD0 register */
ret = spirit_reg_write(spirit, MOD0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_ookpeackdecay
*
* Description:
* Sets the OOK Peak Decay.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ookdelay - Peak decay control for OOK.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errnor value is returned on
* any failure.
*
******************************************************************************/
int spirit_radio_set_ookpeackdecay(FAR struct spirit_library_s *spirit,
enum spirit_ookpeakdelay_e ookdelay)
{
uint8_t regval;
/* Check the parameters */
DEBUGASSERT(IS_OOK_PEAK_DECAY(ookdelay));
/* Read the RSSI_FLT register */
spirit_reg_read(spirit, RSSI_FLT_BASE, &regval, 1);
/* Mask the other fields and set OOK Peak Decay */
regval &= 0xfc;
regval |= ookdelay;
/* Write the RSSI_FLT register to set the new OOK peak dacay value */
return spirit_reg_write(spirit, RSSI_FLT_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_ookpeackdecay
*
* Description:
* Returns the OOK Peak Decay.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Ook peak decay value.
*
******************************************************************************/
enum spirit_ookpeakdelay_e
spirit_radio_get_ookpeackdecay(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the OOK peak decay register RSSI_FLT_BASE */
spirit_reg_read(spirit, RSSI_FLT_BASE, &regval, 1);
/* Returns the OOK peak decay */
return (enum spirit_ookpeakdelay_e)(regval & 0x03);
}
/******************************************************************************
* Name: spirit_radio_convert_power2reg
*
* Description:
* Returns the PA register value that corresponds to the passed dBm power.
*
* NOTE: The power interpolation curves used by this function have been
* extracted by measurements done on the divisional evaluation boards.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fbase - Frequency base expressed in Hz.
* power - Desired power in dBm.
*
* Returned Value:
* Register value as byte.
*
******************************************************************************/
uint8_t spirit_radio_convert_power2reg(FAR struct spirit_library_s *spirit,
uint32_t fbase, float power)
{
float pavalue;
uint8_t i = 0;
uint8_t j = 0;
if (IS_FREQUENCY_BAND_HIGH(fbase))
{
i = 0;
if (fbase < 900000000)
{
i = 1; /* 868 */
}
}
else if (IS_FREQUENCY_BAND_MIDDLE(fbase))
{
i = 2;
}
else if (IS_FREQUENCY_BAND_LOW(fbase))
{
i = 3;
}
else if (IS_FREQUENCY_BAND_VERY_LOW(fbase))
{
i = 4;
}
j = 1;
if (power > 0 &&
13.0 / g_power_factors[i][2] - g_power_factors[i][3] /
g_power_factors[i][2] < power)
{
j = 0;
}
else if (power <= 0 &&
40.0 / g_power_factors[i][2] - g_power_factors[i][3] /
g_power_factors[i][2] > power)
{
j = 2;
}
pavalue = g_power_factors[i][2 * j] * power +
g_power_factors[i][2 * j + 1];
if (pavalue < 1)
{
pavalue = 1;
}
else if (pavalue > 90)
{
pavalue = 90;
}
return (uint8_t)pavalue;
}
/******************************************************************************
* Name: spirit_radio_convert_reg2power
*
* Description:
* Returns the dBm power that corresponds to the value of PA register.
*
* NOTE: The power interpolation curves used by this function have been
* extracted by measurements done on the divisional evaluation boards.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* fbase - Frequency base expressed in Hz.
* regval - Register value of the PA.
*
* Returned Value:
* Power in dBm as float.
*
******************************************************************************/
float spirit_radio_convert_reg2power(FAR struct spirit_library_s *spirit,
uint32_t fbase, uint8_t regval)
{
uint8_t i = 0;
uint8_t j = 0;
float power;
if (regval == 0 || regval > 90)
{
return -130.0;
}
if (IS_FREQUENCY_BAND_HIGH(fbase))
{
i = 0;
if (fbase < 900000000)
{
i = 1; /* 868 */
}
}
else if (IS_FREQUENCY_BAND_MIDDLE(fbase))
{
i = 2;
}
else if (IS_FREQUENCY_BAND_LOW(fbase))
{
i = 3;
}
else if (IS_FREQUENCY_BAND_VERY_LOW(fbase))
{
i = 4;
}
j = 1;
if (regval < 13)
{
j = 0;
}
else if (regval > 40)
{
j = 2;
}
power = (((float)regval) / g_power_factors[i][2 * j] -
g_power_factors[i][2 * j + 1] / g_power_factors[i][2 * j]);
return power;
}
/******************************************************************************
* Name: spirit_radio_config_patable_dbm
*
* Description:
* Configures the Power Amplifier Table and registers with value expressed
* in dBm.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* nlevels - Number of levels to set. This parameter must be in the range
* [0:7].
* width - Step width expressed in terms of bit period units Tb/8. This
* parameter must be in the range [1:4].
* load - The of the possible value of the enum type enum
* pirit_paload_capacitor_e.
*
* LOAD_0_PF No additional PA load capacitor
* LOAD_1_2_PF 1.2pF additional PA load capacitor
* LOAD_2_4_PF 2.4pF additional PA load capacitor
* LOAD_3_6_PF 3.6pF additional PA load capacitor
*
* table - Pointer to an array of PA values in dbm between
* [-PA_LOWER_LIMIT: PA_UPPER_LIMIT] dbm. The first element must
* be the lower level (PA_LEVEL[0]) value and the last element
* the higher level one (PA_LEVEL[paLevelMaxIndex]).
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_config_patable_dbm(FAR struct spirit_library_s *spirit,
uint8_t nlevels, uint8_t width,
enum spirit_paload_capacitor_e load,
FAR float *table)
{
uint8_t palevel[9];
uint8_t regaddr;
uint8_t value;
uint32_t fbase = spirit_radio_get_basefrequency(spirit);
int i;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(nlevels));
DEBUGASSERT(IS_PA_STEP_WIDTH(width));
DEBUGASSERT(IS_PA_LOAD_CAP(load));
/* Check the PA level in dBm is in the range and calculate the PA_LEVEL value
* to write in the corresponding register using the linearization formula.
*/
for (i = 0; i <= nlevels; i++)
{
DEBUGASSERT(IS_PAPOWER_DBM(*table));
value = spirit_radio_convert_power2reg(spirit, fbase, *table);
palevel[nlevels - i] = value;
table++;
}
/* Set the PA_POWER[0] register */
palevel[nlevels + 1] = load | (width - 1) << 3 | nlevels;
/* Get the base address */
regaddr = PA_POWER8_BASE + 7 - nlevels;
/* Configuresthe PA_POWER registers */
return spirit_reg_write(spirit, regaddr, palevel, nlevels + 2);
}
/******************************************************************************
* Name: spirit_radio_get_patable_dbm
*
* Description:
* Returns the Power Amplifier Table and registers, returning values in dBm.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* nlevels - Pointer to the number of levels settled. This parameter must
* be in the range [0:7].
* table - Pointer to an array of 8 elements containing the PA value in
* dbm.
* The first element will be the PA_LEVEL_0 and the last element
* will be PA_LEVEL_7. Any value higher than PA_UPPER_LIMIT
* implies no output power (output stage is in high impedance).
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_get_patable_dbm(FAR struct spirit_library_s *spirit,
FAR uint8_t *nlevels, FAR float *table)
{
uint32_t fbase = spirit_radio_get_basefrequency(spirit);
uint8_t palevel[9];
int ret;
int i;
/* Reads the PA_LEVEL_x registers and the PA_POWER_0 register */
ret = spirit_reg_read(spirit, PA_POWER8_BASE, palevel, 9);
if (ret >= 0)
{
/* Fill the PAtable */
for (i = 7; i >= 0; i--)
{
*table++ = spirit_radio_convert_reg2power(spirit, fbase, palevel[i]);
}
/* Return the settled index */
*nlevels = palevel[8] & 0x07;
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_palevel_dbm
*
* Description:
* Sets a specific PA_LEVEL register, with a value given in dBm.
*
* NOTE: This function makes use of the spirit_radio_convert_power2reg fcn
* to interpolate the power value.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ndx - PA_LEVEL to set. This parameter shall be in the range [0:7].
* power - PA value to write expressed in dBm . Be sure that this values
* is in the correct range [-PA_LOWER_LIMIT: PA_UPPER_LIMIT] dBm.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_palevel_dbm(FAR struct spirit_library_s *spirit,
uint8_t ndx, float power)
{
uint32_t basefrequency;
uint8_t address;
uint8_t level;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(ndx));
DEBUGASSERT(IS_PAPOWER_DBM(power));
/* Interpolate the power level */
basefrequency = spirit_radio_get_basefrequency(spirit);
level = spirit_radio_convert_power2reg(spirit, basefrequency, power);
/* Sets the base address */
address = PA_POWER8_BASE + 7 - ndx;
/* Configures the PA_LEVEL register */
return spirit_reg_write(spirit, address, &level, 1);
}
/******************************************************************************
* Name: spirit_radio_get_palevel_dbm
*
* Description:
* Returns a specific PA_LEVEL register, returning a value in dBm.
*
* NOTE:
* This function makes use of the @ref spirit_radio_convert_reg2power fcn
* to interpolate the power value.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ndx - PA_LEVEL to read. This parameter shall be in the range [0:7]
*
* Returned Value:
* Settled power level expressed in dBm. A value higher than PA_UPPER_LIMIT
* dBm implies no output power (output stage is in high impedance).
*
******************************************************************************/
float spirit_radio_get_palevel_dbm(FAR struct spirit_library_s *spirit,
uint8_t ndx)
{
uint8_t regaddr;
uint8_t value;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(ndx));
/* Sets the base address */
regaddr = PA_POWER8_BASE + 7 - ndx;
/* Reads the PA_LEVEL[ndx] register */
spirit_reg_read(spirit, regaddr, &value, 1);
return spirit_radio_convert_reg2power(spirit,
spirit_radio_get_basefrequency(spirit),
value);
}
/******************************************************************************
* Name: spirit_radio_config_patable
*
* Description:
* Configures the Power Amplifier Table and registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* nlevels - Number of levels to set. This parameter must be in the range
* [0:7].
* width - Step width expressed in terms of bit period units Tb/8. This
* parameter must be in the range [1:4].
* load - One of the possible value of the enum type enum
* spirit_paload_capacitor_e.
*
* LOAD_0_PF No additional PA load capacitor
* LOAD_1_2_PF 1.2pF additional PA load capacitor
* LOAD_2_4_PF 2.4pF additional PA load capacitor
* LOAD_3_6_PF 3.6pF additional PA load capacitor
*
* table - Pointer to an array of PA values in the range [0: 90], where
* 0 implies no output power, 1 will be the maximum level and 90
* the minimum one. The first element must be the lower level
* (PA_LEVEL[0]) value and the last element the higher level one
* (PA_LEVEL[paLevelMaxIndex]).
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_config_patable(FAR struct spirit_library_s *spirit,
uint8_t nlevels, uint8_t width,
enum spirit_paload_capacitor_e load,
FAR uint8_t *table)
{
uint8_t palevel[9];
uint8_t regaddr;
int i;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(nlevels));
DEBUGASSERT(IS_PA_STEP_WIDTH(width));
DEBUGASSERT(IS_PA_LOAD_CAP(load));
/* Check the PA levels are in the range */
for (i = 0; i <= nlevels; i++)
{
DEBUGASSERT(IS_PAPOWER(*table));
palevel[nlevels - i] = *table;
table++;
}
/* Sets the PA_POWER[0] register */
palevel[nlevels + 1] = load | ((width - 1) << 3) | nlevels;
/* Sets the base address */
regaddr = PA_POWER8_BASE + 7 - nlevels;
/* Configures the PA_POWER registers */
return spirit_reg_write(spirit, regaddr, palevel, nlevels + 2);
}
/******************************************************************************
* Name: spirit_radio_get_patable
*
* Description:
* Returns the Power Amplifier Table and registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* nlevels - Pointer to the number of levels settled. This parameter must
* be in the range [0:7].
* table - Pointer to an array of 8 elements containing the PA value. The
* first element will be the PA_LEVEL_0 and the last element will
* be PA_LEVEL_7. Any value equals to 0 implies that level has no
* output power (output stage is in high impedance).
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_get_patable(FAR struct spirit_library_s *spirit,
FAR uint8_t *nlevels, FAR uint8_t *table)
{
uint8_t palevels[9];
int ret;
int i;
/* Reads the PA_LEVEL_x registers and the PA_POWER_0 register */
ret = spirit_reg_read(spirit, PA_POWER8_BASE, palevels, 9);
if (ret >= 0)
{
/* Fill the PAtable */
for (i = 7; i >= 0; i--)
{
*table++ = palevels[i];
}
/* Return the settled index */
*nlevels = palevels[8] & 0x07;
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_palevel
*
* Description:
* Sets a specific PA_LEVEL register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ndx - PA_LEVEL to set. This parameter shall be in the range [0:7].
* power - PA value to write in the register. Be sure that this values is
* in the correct range [0 : 90].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_palevel(FAR struct spirit_library_s *spirit,
uint8_t ndx, uint8_t power)
{
uint8_t regaddr;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(ndx));
DEBUGASSERT(IS_PAPOWER(power));
/* Sets the base address */
regaddr = PA_POWER8_BASE + 7 - ndx;
/* Configures the PA_LEVEL register */
return spirit_reg_write(spirit, regaddr, &power, 1);
}
/******************************************************************************
* Name: spirit_radio_get_palevel
*
* Description:
* Returns a specific PA_LEVEL register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ndx - PA_LEVEL to read. This parameter shall be in the range [0:7].
*
* Returned Value:
* PA_LEVEL value. A value equal to zero
* implies no output power (output stage is in high impedance).
*
******************************************************************************/
uint8_t spirit_radio_get_palevel(FAR struct spirit_library_s *spirit,
uint8_t ndx)
{
uint8_t regaddr;
uint8_t regval;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(ndx));
/* Sets the base address */
regaddr = PA_POWER8_BASE + 7 - ndx;
/* Reads the PA_LEVEL[ndx] register and return the value */
spirit_reg_read(spirit, regaddr, &regval, 1);
return regval;
}
/******************************************************************************
* Name: spirit_radio_set_outputload
*
* Description:
* Sets the output stage additional load capacitor bank.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* load one of the possible value of the enum type enum
* spirit_paload_capacitor_e.
* LOAD_0_PF No additional PA load capacitor
* LOAD_1_2_PF 1.2pF additional PA load capacitor
* LOAD_2_4_PF 2.4pF additional PA load capacitor
* LOAD_3_6_PF 3.6pF additional PA load capacitor
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_outputload(FAR struct spirit_library_s *spirit,
enum spirit_paload_capacitor_e load)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_PA_LOAD_CAP(load));
/* Read the PA_POWER_0 register */
ret = spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the CWC[1:0] field and write the new value */
regval &= 0x3f;
regval |= load;
/* Configures the PA_POWER_0 register */
ret = spirit_reg_write(spirit, PA_POWER0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_outputload
*
* Description:
* Returns the output stage additional load capacitor bank.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Output stage additional load capacitor bank. This value may be:
*
* LOAD_0_PF No additional PA load capacitor
* LOAD_1_2_PF 1.2pF additional PA load capacitor
* LOAD_2_4_PF 2.4pF additional PA load capacitor
* LOAD_3_6_PF 3.6pF additional PA load capacitor
*
******************************************************************************/
enum spirit_paload_capacitor_e
spirit_radio_get_outputload(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the PA_POWER_0 register */
spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
/* Mask the CWC[1:0] field and return the value */
return (enum spirit_paload_capacitor_e)(regval & 0xc0);
}
/******************************************************************************
* Name: spirit_radio_set_palevel_maxindex
*
* Description:
* Sets a specific PA_LEVEL_MAX_INDEX.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* ndx - PA_LEVEL_MAX_INDEX to set. This parameter must be in the range
* [0:7].
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_set_palevel_maxindex(FAR struct spirit_library_s *spirit,
uint8_t ndx)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_PA_MAX_INDEX(ndx));
/* Read the PA_POWER_0 register */
ret = spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the PA_LEVEL_MAX_INDEX[1:0] field and write the new value */
regval &= 0xf8;
regval |= ndx;
/* Configures the PA_POWER_0 register */
ret = spirit_reg_write(spirit, PA_POWER0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_palevel_maxindex
*
* Description:
* Returns the actual PA_LEVEL_MAX_INDEX.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Actual PA_LEVEL_MAX_INDEX. This value will be in the range [0:7].
*
******************************************************************************/
uint8_t spirit_radio_get_palevel_maxindex(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the PA_POWER_0 register */
spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
/* Mask the PA_LEVEL_MAX_INDEX[1:0] field and return the value */
return (regval & 0x07);
}
/******************************************************************************
* Name: spirit_radio_set_pastep_width
*
* Description:
* Sets a specific PA_RAMP_STEP_WIDTH.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* width - Step width expressed in terms of bit period units Tb/8. This
* value must be in the range [1:4].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_pastep_width(FAR struct spirit_library_s *spirit,
uint8_t width)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_PA_STEP_WIDTH(width));
/* Read the PA_POWER_0 register */
ret = spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the PA_RAMP_STEP_WIDTH[1:0] field and write the new value */
regval &= 0xe7;
regval |= (width - 1) << 3;
/* Configures the PA_POWER_0 register */
ret = spirit_reg_write(spirit, PA_POWER0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_pastep_width
*
* Description:
* Returns the actual PA_RAMP_STEP_WIDTH.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Step width value expressed in terms of bit period units Tb/8. This
* value will be in the range [1:4].
*
******************************************************************************/
uint8_t spirit_radio_get_pastep_width(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the PA_POWER_0 register */
spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
/* Mask the PA_RAMP_STEP_WIDTH[1:0] field and return the value */
regval &= 0x18;
return ((regval >> 3) + 1);
}
/******************************************************************************
* Name: spirit_radio_enable_paramp
*
* Description:
* Enables or Disables the Power Ramping.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for power ramping. This value can be: S_ENABLE
* or S_DISABLE.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_paramp(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the PA_POWER_0 register and configure the PA_RAMP_ENABLE field */
ret = spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= PA_POWER0_PA_RAMP_MASK;
}
else
{
regval &= (~PA_POWER0_PA_RAMP_MASK);
}
/* Set the PA_POWER_0 register */
ret = spirit_reg_write(spirit, PA_POWER0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_isenabled_paramp
*
* Description:
* Returns the state of the Power Ramping enable bit.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for power ramping. This value can be: S_ENABLE
* or S_DISABLE.
*
* Returned Value:
* Power Ramping enable state.
*
******************************************************************************/
enum spirit_functional_state_e
spirit_radio_isenabled_paramp(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the PA_POWER_0 register and configure the PA_RAMP_ENABLE field */
spirit_reg_read(spirit, PA_POWER0_BASE, &regval, 1);
/* Mask and return data */
return (enum spirit_functional_state_e)((regval >> 5) & 0x01);
}
/******************************************************************************
* Name: spirit_radio_enable_afc
*
* Description:
* Enables or Disables the AFC.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for AFC. This value can be: S_ENABLE or
* S_DISABLE.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_afc(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AFC_2 register and configure the AFC Enabled field */
ret = spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AFC2_AFC_MASK;
}
else
{
regval &= (~AFC2_AFC_MASK);
}
/* Set the AFC_2 register */
ret = spirit_reg_write(spirit, AFC2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_afcfreezeonsync
*
* Description:
* Enables or Disables the AFC freeze on sync word detection.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - new state for AFC freeze on sync word detection.
* This parameter can be: S_ENABLE or S_DISABLE.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_afcfreezeonsync(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AFC_2 register and configure the AFC Freeze on Sync field */
ret = spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AFC2_AFC_FREEZE_ON_SYNC_MASK;
}
else
{
regval &= (~AFC2_AFC_FREEZE_ON_SYNC_MASK);
}
/* Sets the AFC_2 register */
ret = spirit_reg_write(spirit, AFC2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_afcmode
*
* Description:
* Sets the AFC working mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mode - The AFC mode. This value can be one of the values defined in
* enum spirit_afcmode_e:
*
* AFC_SLICER_CORRECTION AFC loop closed on slicer
* AFC_2ND_IF_CORRECTION AFC loop closed on 2nd conversion stage
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_afcmode(FAR struct spirit_library_s *spirit,
enum spirit_afcmode_e mode)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_AFC_MODE(mode));
/* Read the AFC_2 register and configure the AFC Mode field */
ret = spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
if (ret >= 0)
{
if (mode == AFC_2ND_IF_CORRECTION)
{
regval |= AFC_2ND_IF_CORRECTION;
}
else
{
regval &= (~AFC_2ND_IF_CORRECTION);
}
/* Set the AFC_2 register */
ret = spirit_reg_write(spirit, AFC2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_afcmode
*
* Description:
* Returns the AFC working mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Settled AFC mode. This value will be one of the values defined in
* enum spirit_afcmode_e:
*
* AFC_SLICER_CORRECTION AFC loop closed on slicer
* AFC_2ND_IF_CORRECTION AFC loop closed on 2nd conversion stage
*
******************************************************************************/
enum spirit_afcmode_e
spirit_radio_get_afcmode(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC_2 register */
spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
/* Mask the AFC Mode field and returns the value */
return (enum spirit_afcmode_e)(regval & 0x20);
}
/******************************************************************************
* Name: spirit_radio_set_afcpdleakage
*
* Description:
* Sets the AFC peak detector leakage.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* leakage - The peak detector leakage. This value must be in the
* range: [0:31].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_afcpdleakage(FAR struct spirit_library_s *spirit,
uint8_t leakage)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_AFC_PD_LEAKAGE(leakage));
/* Read the AFC_2 register and configure the AFC PD leakage field */
ret = spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
if (ret >= 0)
{
regval &= 0xe0;
regval |= leakage;
/* Set the AFC_2 register */
ret = spirit_reg_write(spirit, AFC2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_afcpdleakage
*
* Description:
* Returns the AFC peak detector leakage.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Peak detector leakage value. This value will be in the range: [0:31].
*
******************************************************************************/
uint8_t spirit_radio_get_afcpdleakage(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC_2 register */
spirit_reg_read(spirit, AFC2_BASE, &regval, 1);
/* Mask the AFC PD leakage field and return the value */
return (regval & 0x1f);
}
/******************************************************************************
* Name: spirit_radio_set_afcfastperiod
*
* Description:
* Sets the length of the AFC fast period expressed as number of samples.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* length - Length of the fast period in number of samples.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_afcfastperiod(FAR struct spirit_library_s *spirit,
uint8_t length)
{
/* Set the AFC_1 register */
return spirit_reg_write(spirit, AFC1_BASE, &length, 1);
}
/******************************************************************************
* Name: spirit_radio_get_afcfastperiod
*
* Description:
* Returns the AFC fast period expressed as number of samples.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Length of the fast period in number of samples.
*
******************************************************************************/
uint8_t spirit_radio_get_afcfastperiod(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC 1 register and return the value */
spirit_reg_read(spirit, AFC1_BASE, &regval, 1);
return regval;
}
/******************************************************************************
* Name: spirit_radio_set_afcfastgain
*
* Description:
* Sets the AFC loop gain in fast mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* gain - AFC loop gain in fast mode. This value must be in the range:
* [0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_afcfastgain(FAR struct spirit_library_s *spirit,
uint8_t gain)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_AFC_FAST_GAIN(gain));
/* Read the AFC_0 register and configure the AFC Fast Gain field */
ret = spirit_reg_read(spirit, AFC0_BASE, &regval, 1);
if (ret >= 0)
{
regval &= 0x0f;
regval |= gain << 4;
/* Set the AFC_0 register */
ret = spirit_reg_write(spirit, AFC0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_afcfastgain
*
* Description:
* Returns the AFC loop gain in fast mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* uint8_t AFC loop gain in fast mode. This value will be in the range:
* [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_afcfastgain(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC_0 register, mask the AFC Fast Gain field and return the
* value.
*/
spirit_reg_read(spirit, AFC0_BASE, &regval, 1);
return ((regval & 0xf0) >> 4);
}
/******************************************************************************
* Name: spirit_radio_set_afclowgain
*
* Description:
* Sets the AFC loop gain in slow mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* gain - AFC loop gain in slow mode. This value must be in the range:
* [0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_afclowgain(FAR struct spirit_library_s *spirit,
uint8_t gain)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_AFC_SLOW_GAIN(gain));
/* Read the AFC_0 register and configure the AFC Slow Gain field */
ret = spirit_reg_read(spirit, AFC0_BASE, &regval, 1);
if (ret >= 0)
{
regval &= 0xf0;
regval |= gain;
/* Set the AFC_0 register */
ret = spirit_reg_write(spirit, AFC0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_afclowgain
*
* Description:
* Returns the AFC loop gain in slow mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AFC loop gain in slow mode. This value will be in the range: [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_afclowgain(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC_0 register, mask the AFC Slow Gain field and return the
* value.
*/
spirit_reg_read(spirit, AFC0_BASE, &regval, 1);
return (regval & 0x0f);
}
/******************************************************************************
* Name: spirit_radio_get_afccorrection
*
* Description:
* Returns the AFC correction from the corresponding register.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AFC correction, read from the corresponding register. This value
* will be in the range [-128:127].
*
******************************************************************************/
int8_t spirit_radio_get_afccorrection(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AFC_CORR register, cast the read value as signed char and return
* it.
*/
spirit_reg_read(spirit, AFC_CORR_BASE, &regval, 1);
return (int8_t)regval;
}
/******************************************************************************
* Name: spirit_radio_get_afccorrection_hz
*
* Description:
* Returns the AFC correction expressed in Hz.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AFC correction expressed in Hz according to the following formula:
*
* Fafc[Hz]= (Fdig/(12*2^10))*AFC_CORR
*
* where AFC_CORR is the value read in the AFC_CORR register
*
******************************************************************************/
int32_t spirit_radio_get_afccorrection_hz(FAR struct spirit_library_s *spirit)
{
int8_t correction;
uint32_t xtal = spirit->xtal_frequency;
/* Read the AFC correction register */
correction = spirit_radio_get_afccorrection(spirit);
if (xtal > DOUBLE_XTAL_THR)
{
xtal /= 2;
}
/* Calculates and return the Frequency Correction */
return (int32_t)(xtal / (12 * pow(2, 10)) * correction);
}
/******************************************************************************
* Name: spirit_radio_enable_agc
*
* Description:
* Enables or Disables the AGC.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for AGC.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_agc(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AGCCTRL_0 register and configure the AGC Enabled field */
ret = spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AGCCTRL0_AGC_MASK;
}
else
{
regval &= (~AGCCTRL0_AGC_MASK);
}
/* Set the AGCCTRL_0 register */
ret = spirit_reg_write(spirit, AGCCTRL0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_agcmode
*
* Description:
* Sets the AGC working mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mode - The AGC mode. This value can be one of the values defined in
* enum spirit_agcmode_e:
*
* AGC_LINEAR_MODE AGC works in linear mode
* AGC_BINARY_MODE AGC works in binary mode
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agcmode(FAR struct spirit_library_s *spirit,
enum spirit_agcmode_e mode)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_AGC_MODE(mode));
/* Read the AGCCTRL_0 register and configure the AGC Mode field */
ret = spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
if (ret >= 0)
{
if (mode == AGC_BINARY_MODE)
{
regval |= AGC_BINARY_MODE;
}
else
{
regval &= (~AGC_BINARY_MODE);
}
/* Set the AGCCTRL_0 register */
ret = spirit_reg_write(spirit, AGCCTRL0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_agcmode
*
* Description:
* Returns the AGC working mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Settled AGC mode. This value can be one of the values defined in
* enum spirit_agcmode_e:
*
* AGC_LINEAR_MODE AGC works in linear mode
* AGC_BINARY_MODE AGC works in binary mode
*
******************************************************************************/
enum spirit_agcmode_e
spirit_radio_get_agcmode(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_0 register, mask the AGC Mode field and return the
* value
*/
spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
return (enum spirit_agcmode_e)(regval & 0x40);
}
/******************************************************************************
* Name: spirit_radio_enable_agcfreeze_steady
*
* Description:
* Enables or Disables the AGC freeze on steady state.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for AGC freeze on steady state.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_agcfreeze_steady(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AGCCTRL_2 register and configure the AGC Freeze On Steady field */
ret = spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AGCCTRL2_FREEZE_ON_STEADY_MASK;
}
else
{
regval &= (~AGCCTRL2_FREEZE_ON_STEADY_MASK);
}
/* Set the AGCCTRL_2 register */
ret = spirit_reg_write(spirit, AGCCTRL2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_enable_agcfreeze_sync
*
* Description:
* Enable or Disable the AGC freeze on sync detection.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for AGC freeze on sync detection.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_agcfreeze_sync(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AGCCTRL_2 register and configure the AGC Freeze On Sync field */
ret = spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AGCCTRL2_FREEZE_ON_SYNC_MASK;
}
else
{
regval &= (~AGCCTRL2_FREEZE_ON_SYNC_MASK);
}
/* Set the AGCCTRL_2 register */
ret = spirit_reg_write(spirit, AGCCTRL2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_enable_agcfreeze_maxatten
*
* Description:
* Enable or Disable the AGC to start with max attenuation.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for AGC start with max attenuation mode.
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_enable_agcfreeze_maxatten(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the AGCCTRL_2 register and configure the AGC Start Max Attenuation
* field.
*/
ret = spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= AGCCTRL2_START_MAX_ATTENUATION_MASK;
}
else
{
regval &= (~AGCCTRL2_START_MAX_ATTENUATION_MASK);
}
/* Set the AGCCTRL_2 register */
ret = spirit_reg_write(spirit, AGCCTRL2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_agcmeasure_us
*
* Description:
* Sets the AGC measure time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* time - AGC measure time expressed in us. This value must be in the
* range [0, 393216/F_Xo].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agcmeasure_us(FAR struct spirit_library_s *spirit,
uint16_t time)
{
uint8_t regval;
uint8_t measure;
int ret;
/* Check the parameter */
DEBUGASSERT(IS_AGC_MEASURE_TIME_US(time, spirit->xtal_frequency));
/* Read the AGCCTRL_2 register */
ret = spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
if (ret >= 0)
{
/* Calculates the measure time value to write in the register */
measure = (uint8_t)
lroundf(log2((float)time / 1e6 * spirit->xtal_frequency / 12));
if (measure > 15)
{
measure = 15;
}
/* Mask the MEAS_TIME field and write the new value */
regval &= 0xf0;
regval |= measure;
/* Set the AGCCTRL_2 register */
ret = spirit_reg_write(spirit, AGCCTRL2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_agcmeasure_us
*
* Description:
* Returns the AGC measure time in microseconds.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC measure time expressed in microseconds. This value will be in
* the range [0, 393216/Fxo].
*
******************************************************************************/
uint16_t spirit_radio_get_agcmeasure_us(FAR struct spirit_library_s *spirit)
{
uint8_t measure;
/* Read the AGCCTRL_2 register */
spirit_reg_read(spirit, AGCCTRL2_BASE, &measure, 1);
/* Mask the MEAS_TIME field */
measure &= 0x0f;
/* Calculates the measure time value to write in the register */
return (uint16_t)((12.0 / spirit->xtal_frequency) *
(float)pow(2, measure) * 1e6);
}
/******************************************************************************
* Name: spirit_radio_set_agcmeasure
*
* Description:
* Sets the AGC measure time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* time - AGC measure time to write in the MEAS_TIME field of AGCCTRL_2
* register. This value must be in the range [0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agcmeasure(FAR struct spirit_library_s *spirit,
uint8_t time)
{
uint8_t regval;
int ret;
/* Check the parameter */
DEBUGASSERT(IS_AGC_MEASURE_TIME(time));
/* Read the AGCCTRL_2 register */
ret = spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the MEAS_TIME field and write the new value */
regval &= 0xf0;
regval |= time;
/* Set the AGCCTRL_2 register */
ret = spirit_reg_write(spirit, AGCCTRL2_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_agcmeasure
*
* Description:
* Returns the AGC measure time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC measure time read from the MEAS_TIME field of AGCCTRL_2 register.
* This value will be in the range [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_agcmeasure(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_2 register, mask the MEAS_TIME field and return the
* value.
*/
spirit_reg_read(spirit, AGCCTRL2_BASE, &regval, 1);
return (regval & 0x0f);
}
/******************************************************************************
* Name: spirit_radio_set_agcholdtime_us
*
* Description:
* Sets the AGC hold time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* time - AGC hold time expressed in us. This value must be in the
* range [0, 756/F_Xo].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agcholdtime_us(FAR struct spirit_library_s *spirit,
uint8_t time)
{
uint8_t regval;
uint8_t hold;
/* Check the parameter */
DEBUGASSERT(IS_AGC_HOLD_TIME_US(time, spirit->xtal_frequency));
/* Read the AGCCTRL_0 register */
spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
/* Calculates the hold time value to write in the register */
hold = (uint8_t) lroundf(((float)time / 1e6 * spirit->xtal_frequency) / 12);
(hold > 63) ? (hold = 63) : (hold);
/* Mask the HOLD_TIME field and write the new value */
regval &= 0xc0;
regval |= hold;
/* Set the AGCCTRL_0 register */
return spirit_reg_write(spirit, AGCCTRL0_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_agcholdtime_us
*
* Description:
* Returns the AGC hold time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC hold time expressed in us. This value will be in the range:
* [0, 756/F_Xo].
*
******************************************************************************/
uint8_t spirit_radio_get_agcholdtime_us(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_0 register */
spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
/* Mask the HOLD_TIME field */
regval &= 0x3f;
/* Calculates the hold time value and return it */
return (uint8_t) lroundf((12.0 / spirit->xtal_frequency) * (regval * 1e6));
}
/******************************************************************************
* Name: spirit_radio_set_agcholdtime
*
* Description:
* Sets the AGC hold time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* time - AGC hold time to write in the HOLD_TIME field of AGCCTRL_0
* register. This value must be in the range [0:63].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agcholdtime(FAR struct spirit_library_s *spirit,
uint8_t time)
{
uint8_t regval;
int ret;
/* Check the parameter */
DEBUGASSERT(IS_AGC_HOLD_TIME(time));
/* Read the AGCCTRL_0 register */
ret = spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
if (ret >= 0)
{
/* Mask the HOLD_TIME field and write the new value */
regval &= 0xc0;
regval |= time;
/* Set the AGCCTRL_0 register */
ret = spirit_reg_write(spirit, AGCCTRL0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_agcholdtime
*
* Description:
* Returns the AGC hold time.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC hold time read from the HOLD_TIME field of AGCCTRL_0 register. This
* value will be in the range [0:63].
*
******************************************************************************/
uint8_t spirit_radio_get_agcholdtime(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_0 register, mask the MEAS_TIME field and return the
* value.
*/
spirit_reg_read(spirit, AGCCTRL0_BASE, &regval, 1);
return (regval & 0x3f);
}
/******************************************************************************
* Name: spirit_radio_set_agchighthres
*
* Description:
* Sets the AGC high threshold.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* highthres - AGC high threshold to write in the THRESHOLD_HIGH field of
* AGCCTRL_1 register. This value must be in the range
* [0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agchighthres(FAR struct spirit_library_s *spirit,
uint8_t highthres)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_AGC_THRESHOLD(highthres));
/* Read the AGCCTRL_1 register */
spirit_reg_read(spirit, AGCCTRL1_BASE, &regval, 1);
/* Mask the THRESHOLD_HIGH field and write the new value */
regval &= 0x0f;
regval |= highthres << 4;
/* Set the AGCCTRL_1 register */
return spirit_reg_write(spirit, AGCCTRL1_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_agchighthres
*
* Description:
* Returns the AGC high threshold.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC high threshold read from the THRESHOLD_HIGH field of AGCCTRL_1
* register. This value will be in the range [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_agchighthres(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_1 register, mask the THRESHOLD_HIGH field and return the
* value.
*/
spirit_reg_read(spirit, AGCCTRL1_BASE, &regval, 1);
return ((regval & 0xf0) >> 4);
}
/******************************************************************************
* Name: spirit_radio_set_agclowthres
*
* Description:
* Sets the AGC low threshold.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* lowthres - AGC low threshold to write in the THRESHOLD_LOW field of
* AGCCTRL_1 register. This value must be in the range
* 0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_agclowthres(FAR struct spirit_library_s *spirit,
uint8_t lowthres)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_AGC_THRESHOLD(lowthres));
/* Read the AGCCTRL_1 register */
spirit_reg_read(spirit, AGCCTRL1_BASE, &regval, 1);
/* Mask the THRESHOLD_LOW field and write the new value */
regval &= 0xf0;
regval |= lowthres;
/* Set the AGCCTRL_1 register */
return spirit_reg_write(spirit, AGCCTRL1_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_agclowthres
*
* Description:
* Returns the AGC low threshold.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* AGC low threshold read from the THRESHOLD_LOW field of AGCCTRL_1 register.
* This value will be in the range [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_agclowthres(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the AGCCTRL_1 register, mask the THRESHOLD_LOW field and return the
* value.
*/
spirit_reg_read(spirit, AGCCTRL1_BASE, &regval, 1);
return (regval & 0x0f);
}
/******************************************************************************
* Name: spirit_radio_set_clkrecmode
*
* Description:
* Sets the clock recovery algorithm.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mode - The Clock Recovery mode. This value can be one of the values
* defined in enum spirit_clkrecmode_e :
*
* CLK_REC_PLL PLL algorithm for clock recovery
* CLK_REC_DLL DLL algorithm for clock recovery
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_clkrecmode(FAR struct spirit_library_s *spirit,
enum spirit_clkrecmode_e mode)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_CLK_REC_MODE(mode));
/* Read the FDEV_0 register */
spirit_reg_read(spirit, FDEV0_BASE, &regval, 1);
/* Mask the CLOCK_REC_ALGO_SEL field and write the new value */
regval &= 0xf7;
regval |= (uint8_t) mode;
/* Set the FDEV_0 register */
return spirit_reg_write(spirit, FDEV0_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_clkrecmode
*
* Description:
* Returns the Clock Recovery working mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Clock Recovery mode. This value can be one of the values defined in
* enum spirit_clkrecmode_e:
*
* CLK_REC_PLL PLL algorithm for clock recovery
* CLK_REC_DLL DLL algorithm for clock recovery
*
******************************************************************************/
enum spirit_clkrecmode_e
spirit_radio_get_clkrecmode(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the FDEV_0 register, mask the CLOCK_REC_ALGO_SEL field and return
* the value.
*/
spirit_reg_read(spirit, FDEV0_BASE, &regval, 1);
return (enum spirit_clkrecmode_e)(regval & 0x08);
}
/******************************************************************************
* Name: spirit_radio_set_clkrecgain
*
* Description:
* Sets the clock recovery proportional gain.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* pgain - The Clock Recovery proportional gain to write in the
* CLK_REC_P_GAIN field of CLOCKREC register. This is the log2
* value of the clock recovery proportional gain. This value
* must be in the range [0:7].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_clkrecgain(FAR struct spirit_library_s *spirit,
uint8_t pgain)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_CLK_REC_P_GAIN(pgain));
/* Read the CLOCKREC register */
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
/* Mask the CLK_REC_P_GAIN field and write the new value */
regval &= 0x1f;
regval |= (pgain << 5);
/* Set the CLOCKREC register */
return spirit_reg_write(spirit, CLOCKREC_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_clkrecgain
*
* Description:
* Returns the log2 of the clock recovery proportional gain.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Clock Recovery proportional gain read from the CLK_REC_P_GAIN field of
* CLOCKREC register. This value will be in the range [0:7].
*
******************************************************************************/
uint8_t spirit_radio_get_clkrecgain(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the CLOCKREC register, mask the CLK_REC_P_GAIN field and return the
* value.
*/
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
return ((regval & 0xef) >> 5);
}
/******************************************************************************
* Name: spirit_radio_set_clkrecigain
*
* Description:
* Sets the clock recovery integral gain.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* igain - The Clock Recovery integral gain to write in the CLK_REC_I_GAIN
* field of CLOCKREC register. This value must be in the range
* [0:15].
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_clkrecigain(FAR struct spirit_library_s *spirit,
uint8_t igain)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_CLK_REC_I_GAIN(igain));
/* Read the CLOCKREC register */
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
/* Mask the CLK_REC_P_GAIN field and write the new value */
regval &= 0xf0;
regval |= igain;
/* Set the CLOCKREC register */
return spirit_reg_write(spirit, CLOCKREC_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_clkrecigain
*
* Description:
* Returns the clock recovery integral gain.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Clock Recovery integral gain read from the CLK_REC_I_GAIN field of
* CLOCKREC register. This value will be in the range [0:15].
*
******************************************************************************/
uint8_t spirit_radio_get_clkrecigain(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the CLOCKREC register, mask the CLK_REC_I_GAIN field and return the
* value.
*/
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
return (regval & 0x0f);
}
/******************************************************************************
* Name: spirit_radio_set_clkrecpstfltlen
*
* Description:
* Sets the postfilter length for clock recovery algorithm.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* length - The postfilter length in symbols. This value can be one of
* the values defined in enum spirit_pstfltlen_e :
*
* PSTFLT_LENGTH_8 Postfilter length is 8 symbols
* PSTFLT_LENGTH_16 Postfilter length is 16 symbols
*
* Returned Value:
* Zero (OK) on success. A negated errno value is returned on any failure.
*
******************************************************************************/
int spirit_radio_set_clkrecpstfltlen(FAR struct spirit_library_s *spirit,
enum spirit_pstfltlen_e length)
{
uint8_t regval;
/* Check the parameter */
DEBUGASSERT(IS_PST_FLT_LENGTH(length));
/* Read the CLOCKREC register */
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
/* Mask the PSTFLT_LEN field and write the new value */
regval &= 0xef;
regval |= (uint8_t) length;
/* Set the CLOCKREC register */
return spirit_reg_write(spirit, CLOCKREC_BASE, &regval, 1);
}
/******************************************************************************
* Name: spirit_radio_get_clkrecpstfltlen
*
* Description:
* Returns the postfilter length for clock recovery algorithm.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Postfilter length in symbols. This value can be one of the values
* defined in enum spirit_pstfltlen_e:
*
* PSTFLT_LENGTH_8 Postfilter length is 8 symbols
* PSTFLT_LENGTH_16 Postfilter length is 16 symbols
*
******************************************************************************/
enum spirit_pstfltlen_e
spirit_radio_get_clkrecpstfltlen(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
/* Read the CLOCKREC register, mask the PSTFLT_LEN field and return the
* value.
*/
spirit_reg_read(spirit, CLOCKREC_BASE, &regval, 1);
return (enum spirit_pstfltlen_e)(regval & 0x10);
}
/******************************************************************************
* Name: spirit_radio_enable_csblanking
*
* Description:
* Enables or Disables the received data blanking when the CS is under the
* threshold.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state of this mode.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_enable_csblanking(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the ANT_SELECT_CONF_BASE and mask the CS_BLANKING BIT field */
ret = spirit_reg_read(spirit, ANT_SELECT_CONF_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= ANT_SELECT_CS_BLANKING_MASK;
}
else
{
regval &= (~ANT_SELECT_CS_BLANKING_MASK);
}
/* Write the new value to the ANT_SELECT_CONF register */
ret = spirit_reg_write(spirit, ANT_SELECT_CONF_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_persistentrx
*
* Description:
* Enables or Disables the persistent RX mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state of this mode.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_persistentrx(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval = 0;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the PROTOCOL0_BASE and mask the PROTOCOL0_PERS_RX_MASK bitfield */
ret = spirit_reg_read(spirit, PROTOCOL0_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= PROTOCOL0_PERS_RX_MASK;
}
else
{
regval &= (~PROTOCOL0_PERS_RX_MASK);
}
/* Write the new value to the PROTOCOL0_BASE register */
ret = spirit_reg_write(spirit, PROTOCOL0_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_set_refdiv
*
* Description:
* Enables or Disables the synthesizer reference divider.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate new state for synthesizer reference divider.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_set_refdiv(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the SYNTH_CONFIG1_BASE and mask the REFDIV bit field */
ret = spirit_reg_read(spirit, SYNTH_CONFIG1_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= 0x80;
}
else
{
regval &= 0x7f;
}
/* Write the new value to the SYNTH_CONFIG1_BASE register */
ret = spirit_reg_write(spirit, SYNTH_CONFIG1_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_get_refdiv
*
* Description:
* Get the the synthesizer reference divider state.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* S_ENABLE or S_DISABLE. Errors are not reported.
*
******************************************************************************/
enum spirit_functional_state_e
spirit_radio_get_refdiv(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
spirit_reg_read(spirit, SYNTH_CONFIG1_BASE, &regval, 1);
if (((regval >> 7) & 0x1) != 0)
{
return S_ENABLE;
}
else
{
return S_DISABLE;
}
}
/******************************************************************************
* Name: spirit_radio_enable_digdivider
*
* Description:
* Enables or Disables the synthesizer reference divider.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for synthesizer reference divider.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_radio_enable_digdivider(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
/* Check the parameters */
DEBUGASSERT(IS_SPIRIT_FUNCTIONAL_STATE(newstate));
/* Read the XO_RCO_TEST_BASE and mask the PD_CLKDIV bit field */
ret = spirit_reg_read(spirit, XO_RCO_TEST_BASE, &regval, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval &= 0xf7;
}
else
{
regval |= 0x08;
}
/* Write the new value to the XO_RCO_TEST_BASE register */
ret = spirit_reg_write(spirit, XO_RCO_TEST_BASE, &regval, 1);
}
return ret;
}
/******************************************************************************
* Name: spirit_radio_isenabled_digdivider
*
* Description:
* Get the the synthesizer reference divider state.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* S_ENABLE or S_DISABLE. Error conditions are not detected.
*
******************************************************************************/
enum spirit_functional_state_e
spirit_radio_isenabled_digdivider(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
spirit_reg_read(spirit, XO_RCO_TEST_BASE, &regval, 1);
if (((regval >> 3) & 0x1) != 0)
{
return S_DISABLE;
}
else
{
return S_ENABLE;
}
}
Reference in New Issue View Git Blame Copy Permalink