d6f7821b15
Mac OS X was renamed to macOS at some point. Update references to OSX, OS X, Mac OS X, Mac OSX, and other permutations, to macOS, in README files and in comments of other files.
542 lines
18 KiB
Plaintext
542 lines
18 KiB
Plaintext
README
|
|
^^^^^
|
|
|
|
This is the README file for the port of NuttX to the Micropendous 3 board.
|
|
This board is develepmend by http://code.google.com/p/opendous/. The
|
|
Micropendous 3 is based on an Atmel AT90USB646, 647, 1286 or 1287 MCU.
|
|
NuttX was ported using the AT90USB647 version. As of this writing,
|
|
documentation for the Micropendous board is available here:
|
|
http://code.google.com/p/micropendous/wiki/Micropendous3
|
|
|
|
Contents
|
|
^^^^^^^^
|
|
|
|
o Micropendous3 Features
|
|
o Pin Usage
|
|
o Atmel AVRISP mkII Connection
|
|
o DFU Bootloader
|
|
o Serial Console
|
|
o Toolchains
|
|
o Windows Native Toolchains
|
|
o NuttX buildroot Toolchain
|
|
o avr-libc
|
|
o Micropendous3 Configuration Options
|
|
o Configurations
|
|
|
|
Micropendous3 Features
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
o Based on the 64-pin USB AVR Microcontrollers: AT90USB646, AT90USB647,
|
|
AT90USB1286, or AT90USB1287.
|
|
o USB Full Speed (12Mbit/s)
|
|
o USB Device Mode (Host mode supported with AT90USBxx7 devices)
|
|
o 60kb (AT90USB64) or 120kb (AT90USB128) of available FLASH memory for
|
|
your programs (4kb(AT90USB64)/8kb(AT90USB128) used by USB bootloader -
|
|
stock Atmel or LUFA)
|
|
o 4 kbytes SRAM and 2 kbytes of EEPROM (AT90USB64) or 8 kbytes SRAM and 4
|
|
kbytes of EEPROM (AT90USB128)
|
|
o External SRAM is possible. Layout for CY7C1019D 1-Mbit SRAM (unpopulated)
|
|
o USB powered
|
|
o 16MHz crystal
|
|
o 48 General Purpose IO Pins (47 with external SRAM)
|
|
o Vcc=VBUS jumper selects whether USB VBUS or an external supply is used
|
|
to power the board
|
|
o RESET and HWB buttons to enable firmware loading over USB (no external
|
|
programmer required)
|
|
o HWB can be used as a user button
|
|
o USB-A Plug
|
|
o JTAG header
|
|
o Size LxWxH (including headers): 3.15" x 0.8" x 0.6" =~ 8cm x 2cm x 1.5cm
|
|
o Completely OpenHardware Design
|
|
|
|
Pin Usage
|
|
^^^^^^^^^
|
|
|
|
AT90USB90128/64 TQFP64
|
|
-- ------------------------ ---------------------------------------------
|
|
PIN SIGNAL BOARD CONNECTION
|
|
-- ------------------------ ---------------------------------------------
|
|
(left)
|
|
1 (INT.6/AIN.0) PE6 J3-25 E6, CY7C1019D ^CE (Unpopulated)
|
|
2 (INT.7/AIN.1/UVcon) PE7 J3-26 E7, CY7C1019D A16 (Unpopulated)
|
|
3 UVcc
|
|
4 D- USB DP
|
|
5 D+ USB DM
|
|
6 UGnd GND
|
|
7 UCap GND (via cap)
|
|
8 VBus USB VBUS
|
|
9 (IUID) PE3 J3-22 E3
|
|
10 (SS/PCINT0) PB0 J3-28 B0
|
|
11 (PCINT1/SCLK) PB1 J3-29 B1
|
|
12 (PDI/PCINT2/MOSI) PB2 J3-30 B2
|
|
13 (PDO/PCINT3/MISO) PB3 J3-31 B3
|
|
14 (PCINT4/OC.2A) PB4 J3-32 B4
|
|
15 (PCINT5/OC.1A) PB5 J3-33 B5
|
|
16 (PCINT6/OC.1B) PB6 J3-34 B6
|
|
(bottom)
|
|
17 (PCINT7/OC.0A/OC.1C) PB7 J3-35 B7
|
|
18 (INT4/TOSC1) PE4 J3-23 E4
|
|
19 (INT.5/TOSC2) PE5 J3-24 E5
|
|
20 RESET SW1
|
|
21 VCC VCC
|
|
22 GND GND
|
|
23 XTAL2 X1
|
|
24 XTAL1 X1
|
|
25 (OC0B/SCL/INT0) PD0 J3-36 D0
|
|
26 (OC2B/SDA/INT1) PD1 J3-37 D1
|
|
27 (RXD1/INT2) PD2 J3-38 D2
|
|
28 (TXD1/INT3) PD3 J3-39 D3
|
|
29 (ICP1) PD4 J3-40 D4
|
|
30 (XCK1) PD5 J3-41 D5
|
|
31 (T1) PD6 J3-42 D6
|
|
32 (T0) PD7 J3-43 D7
|
|
(right)
|
|
48 PA3 (AD3) J3-14 A3, 74AHC573 D3, CY7C1019D |O3 (Unpopulated)
|
|
47 PA4 (AD4) J3-15 A4, 74AHC573 D4, CY7C1019D |O4 (Unpopulated)
|
|
46 PA5 (AD5) J3-16 A5, 74AHC573 D5, CY7C1019D |O5 (Unpopulated)
|
|
45 PA6 (AD6) J3-17 A6, 74AHC573 D6, CY7C1019D |O6 (Unpopulated)
|
|
44 PA7 (AD7) J3-18 A7, 74AHC573 D7, CY7C1019D |O7 (Unpopulated)
|
|
43 PE2 (ALE/HWB) SW-2 (pulled-up), J3-21 E2, 74AHC573 Cp
|
|
42 PC7 (A15/IC.3/CLKO) J3-51 C7, CY7C1019D A15 (Unpopulated)
|
|
41 PC6 (A14/OC.3A) J3-50 C6, CY7C1019D A14 (Unpopulated)
|
|
40 PC5 (A13/OC.3B) J3-49 C5, CY7C1019D A13 (Unpopulated)
|
|
39 PC4 (A12/OC.3C) J3-48 C4, CY7C1019D A12 (Unpopulated)
|
|
38 PC3 (A11/T.3) J3-47 C3, CY7C1019D A11 (Unpopulated)
|
|
37 PC2 (A10) J3-46 C2, CY7C1019D A10 (Unpopulated)
|
|
36 PC1 (A9) J3-45 C1, CY7C1019D A9 (Unpopulated)
|
|
35 PC0 (A8) J3-44 C0, CY7C1019D A8 (Unpopulated)
|
|
34 PE1 (RD) J3-20 E1, CY7C1019D ^OE (Unpopulated)
|
|
33 PE0 (WR) J3-19 E0, CY7C1019D ^WE (Unpopulated)
|
|
(top)
|
|
64 AVCC (Power circuitry)
|
|
63 GND GND
|
|
62 AREF J3-2 AREF, (Power circuitry)
|
|
61 PF0 (ADC0) J3-3 F0
|
|
60 PF1 (ADC1) J3-4 F1
|
|
59 PF2 (ADC2) J3-5 F2
|
|
58 PF3 (ADC3) J3-6 F3
|
|
57 PF4 (ADC4/TCK) J3-7 F4, JTAG TCK
|
|
56 PF5 (ADC5/TMS) J3-8 F5, JTAG TMS
|
|
55 PF6 (ADC6/TDO) J3-9 F6, JTAG TD0
|
|
54 PF7 (ADC7/TDI) J3-20 F7, JTAG TDI
|
|
53 GND GND
|
|
52 VCC VCC
|
|
51 PA0 (AD0) J3-11 A0, 74AHC573 D0, CY7C1019D |O0 (Unpopulated)
|
|
50 PA1 (AD1) J3-12 A1, 74AHC573 D1, CY7C1019D |O1 (Unpopulated)
|
|
49 PA2 (AD2) J3-13 A2, 74AHC573 D2, CY7C1019D |O2 (Unpopulated)
|
|
|
|
Atmel AVRISP mkII Connection
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
ISP6PIN Header
|
|
--------------
|
|
|
|
1 2
|
|
MISO o o VCC
|
|
SCK o o MOSI
|
|
RESET o o GND
|
|
|
|
Micropendous 3 JTAG (JTAG10PIN Connector)
|
|
------------------- ---------------------
|
|
|
|
1 2 1 2
|
|
TCK o o GND TCK o o GND
|
|
TDO o o VCC TDO o o VTref
|
|
TMS o o RESET TMS o o nSRST
|
|
VCC o o N/C o o (nTRST)
|
|
TDI o o GND TDI o o GND
|
|
|
|
JTAGICE mkII Connection to 10-pin Header
|
|
------------------------------------------
|
|
10PIN Header 6PIN Header
|
|
-------------------- ---------------------
|
|
Pin 1 TCK Pin 3 SCK
|
|
Pin 2 GND Pin 6 GND
|
|
Pin 3 TDO Pin 1 MISO
|
|
Pin 4 VTref Pin 2 Vcc
|
|
Pin 6 nSRT Pin 5 Reset
|
|
Pin 9 TDI Pin 4 MOSI
|
|
|
|
DFU Bootloader
|
|
^^^^^^^^^^^^^^
|
|
|
|
There is also an DFU bootloader that resides in the upper 8Kb of FLASH
|
|
(unless you ERASE the flash with ICE). You can enter this bootloader
|
|
(if it is in FLASH) by:
|
|
|
|
Holding both the SW1 (RESET) and SW2, then releasing SW1 while continuing
|
|
to hold SW2. SW2 connects to the PE2/HWB signal and causes a reset into
|
|
the bootloader memory region.
|
|
|
|
Then you can use FLIP to load code into FLASH (available at the Atmel Web
|
|
Site). The DFU USB driver for the DFU bootload is available in the usb
|
|
subdirectory in the FLIP installation location.
|
|
|
|
Serial Console
|
|
^^^^^^^^^^^^^^
|
|
|
|
A serial console is supported on an external MAX232/MAX3232 Connected
|
|
on PD2 and PD3:
|
|
|
|
Port D, Bit 2: RXD1, Receive Data (Data input pin for the USART1). When
|
|
the USART1 receiver is enabled this pin is configured as an input
|
|
regardless of the value of DDD2. When the USART forces this pin to
|
|
be an input, the pull-up can still be controlled by the PORTD2 bit.
|
|
Port D, Bit 3: TXD1, Transmit Data (Data output pin for the USART1).
|
|
When the USART1 Transmitter is enabled, this pin is configured as
|
|
an output regardless of the value of DDD3.
|
|
|
|
AT90USB90128/64 TQFP64
|
|
-- ------------------------ ---------------------------------------------
|
|
PIN SIGNAL BOARD CONNECTION
|
|
-- ------------------------ ---------------------------------------------
|
|
27 (RXD1/INT2) PD2 J3-38 D2
|
|
28 (TXD1/INT3) PD3 J3-39 D3
|
|
|
|
Toolchains
|
|
^^^^^^^^^^
|
|
|
|
There are several toolchain options. However, testing has been performed
|
|
using *only* the NuttX buildroot toolchain described below. Therefore,
|
|
the NuttX buildroot toolchain is the recommended choice.
|
|
|
|
The toolchain may be selected using the kconfig-mconf tool (via 'make menuconfig'),
|
|
by editing the existing configuration file (defconfig), or by overriding
|
|
the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
|
|
|
|
The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
|
|
|
|
Buildroot:
|
|
|
|
There is a DIY buildroot version for the AVR boards here:
|
|
http://bitbucket.org/nuttx/buildroot/downloads/. See the
|
|
following section for details on building this toolchain.
|
|
|
|
Before building, make sure that the path to the new toolchain is included
|
|
in your PATH environment variable.
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_BUILDROOT_TOOLCHAIN=y is set in your
|
|
.config file.
|
|
|
|
WinAVR:
|
|
|
|
For Cygwin development environment on Windows machines, you can use
|
|
WinAVR: http://sourceforge.net/projects/winavr/files/
|
|
|
|
Before building, make sure that the path to the new toolchain is included
|
|
in your PATH environment variable.
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_WINAVR_TOOLCHAIN=y is set in your
|
|
.config file.
|
|
|
|
WARNING: There is an incompatible version of cygwin.dll in the WinAVR/bin
|
|
directory! Make sure that the path to the correct cygwin.dll file precedes
|
|
the path to the WinAVR binaries!
|
|
|
|
Linux:
|
|
|
|
For Linux, there are widely available avr-gcc packages. On Ubuntu, use:
|
|
sudo apt-get install gcc-avr gdb-avr avr-libc
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC_TOOLCHAIN=y is set in your
|
|
.config file.
|
|
|
|
macOS:
|
|
|
|
For macOS, the CrossPack for AVR toolchain is available from:
|
|
|
|
http://www.obdev.at/products/crosspack/index.html
|
|
|
|
This toolchain is functionally equivalent to the Linux GCC toolchain.
|
|
|
|
Windows Native Toolchains
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The WinAVR toolchain is a Windows native toolchain. There are several
|
|
limitations to using a Windows native toolchain in a Cygwin environment.
|
|
The three biggest are:
|
|
|
|
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
|
performed automatically in the Cygwin makefiles using the 'cygpath'
|
|
utility but you might easily find some new path problems. If so, check
|
|
out 'cygpath -w'
|
|
|
|
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic
|
|
links are used in Nuttx (e.g., include/arch). The make system works
|
|
around these problems for the Windows tools by copying directories
|
|
instead of linking them. But this can also cause some confusion for
|
|
you: For example, you may edit a file in a "linked" directory and find
|
|
that your changes had no effect. That is because you are building the
|
|
copy of the file in the "fake" symbolic directory. If you use a
|
|
Windows toolchain, you should get in the habit of making like this:
|
|
|
|
make clean_context all
|
|
|
|
An alias in your .bashrc file might make that less painful.
|
|
|
|
An additional issue with the WinAVR toolchain, in particular, is that it
|
|
contains an incompatible version of the Cygwin DLL in its bin/ directory.
|
|
You must take care that the correct Cygwin DLL is used.
|
|
|
|
NuttX buildroot Toolchain
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
If NuttX buildroot toolchain source tarball cne can be downloaded from the
|
|
NuttX Bitbucket download site (https://bitbucket.org/nuttx/nuttx/downloads/).
|
|
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
|
|
|
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
|
|
|
tools/configure.sh micropendous3:<sub-dir>
|
|
|
|
NOTE: you also must copy avr-libc header files into the NuttX include
|
|
directory with command perhaps like:
|
|
|
|
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
|
|
|
2. Download the latest buildroot package into <some-dir>
|
|
|
|
3. unpack the buildroot tarball. The resulting directory may
|
|
have versioning information on it like buildroot-x.y.z. If so,
|
|
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
|
|
|
4. cd <some-dir>/buildroot
|
|
|
|
5. cp boards/avr-defconfig-4.5.2 .config
|
|
|
|
6. make oldconfig
|
|
|
|
7. make
|
|
|
|
8. Make sure that the PATH variable includes the path to the newly built
|
|
binaries.
|
|
|
|
See the file boards/README.txt in the buildroot source tree. That has more
|
|
detailed PLUS some special instructions that you will need to follow if you
|
|
are building a toolchain for Cygwin under Windows.
|
|
|
|
avr-libc
|
|
^^^^^^^^
|
|
|
|
Header Files
|
|
|
|
In any case, header files from avr-libc are required: http://www.nongnu.org/avr-libc/.
|
|
A snapshot of avr-lib is included in the WinAVR installation. For Linux
|
|
development platforms, avr-libc package is readily available (and would
|
|
be installed in the apt-get command shown above). But if you are using
|
|
the NuttX buildroot configuration on Cygwin, then you will have to build
|
|
get avr-libc from binaries.
|
|
|
|
Header File Installation
|
|
|
|
The NuttX build will required that the AVR header files be available via
|
|
the NuttX include directory. This can be accomplished by either copying
|
|
the avr-libc header files into the NuttX include directory:
|
|
|
|
cp -a <avr-libc-path>/include/avr <nuttx-path>/include/.
|
|
|
|
Or simply using a symbolic link:
|
|
|
|
ln -s <avr-libc-path>/include/avr <nuttx-path>/include/.
|
|
|
|
Build Notes:
|
|
|
|
It may not necessary to have a built version of avr-lib; only header files
|
|
are required. Bu if you choose to use the optimized libraru functions of
|
|
the flowing point library, then you may have to build avr-lib from sources.
|
|
Below are instructions for building avr-lib from fresh sources:
|
|
|
|
1. Download the avr-libc package from:
|
|
|
|
http://savannah.nongnu.org/projects/avr-libc/
|
|
|
|
I am using avr-lib-1.7.1.tar.bz2
|
|
|
|
2. Upack the tarball and cd into the
|
|
|
|
tar jxf avr-lib-1.7.1.tar.bz2
|
|
cd avr-lib-1.7.1
|
|
|
|
3. Configure avr-lib. Assuming that WinAVR is installed at the following
|
|
location:
|
|
|
|
export PATH=/cygdrive/c/WinAVR/bin:$PATH
|
|
./configure --build=`./config.guess` --host=avr
|
|
|
|
This takes a *long* time.
|
|
|
|
4. Make avr-lib.
|
|
|
|
make
|
|
|
|
This also takes a long time because it generates variants for nearly
|
|
all AVR chips.
|
|
|
|
5. Install avr-lib.
|
|
|
|
make install
|
|
|
|
Micropendous3 Configuration Options
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
|
be set to:
|
|
|
|
CONFIG_ARCH=avr
|
|
|
|
CONFIG_ARCH_family - For use in C code:
|
|
|
|
CONFIG_ARCH_AVR=y
|
|
|
|
CONFIG_ARCH_architecture - For use in C code:
|
|
|
|
CONFIG_ARCH_CHIP_AT90USB=y
|
|
|
|
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
|
|
|
CONFIG_ARCH_CHIP=at90usb
|
|
|
|
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
|
chip. This should be exactly one of
|
|
|
|
CONFIG_ARCH_CHIP_AT90USB646=y
|
|
CONFIG_ARCH_CHIP_AT90USB647=y
|
|
CONFIG_ARCH_CHIP_AT90USB1286=y
|
|
CONFIG_ARCH_CHIP_AT90USB1287=y
|
|
|
|
Depending on which Micropendous3 version you have.
|
|
|
|
CONFIG_ARCH_BOARD - Identifies the boards/ subdirectory and
|
|
hence, the board that supports the particular chip or SoC.
|
|
|
|
CONFIG_ARCH_BOARD=micropendous3
|
|
|
|
CONFIG_ARCH_BOARD_name - For use in C code
|
|
|
|
CONFIG_ARCH_BOARD_MICROPENOUS3=y
|
|
|
|
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
|
of delay loops
|
|
|
|
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
|
endian)
|
|
|
|
CONFIG_RAM_SIZE - Describes the installed DRAM. One of:
|
|
|
|
CONFIG_RAM_SIZE=(4*1024) - (4Kb)
|
|
CONFIG_RAM_SIZE=(8*1024) - (8Kb)
|
|
|
|
CONFIG_RAM_START - The start address of installed SRAM
|
|
|
|
CONFIG_RAM_START=0x800100
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
|
have LEDs
|
|
|
|
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
|
stack. If defined, this symbol is the size of the interrupt
|
|
stack in bytes. If not defined, the user task stacks will be
|
|
used during interrupt handling.
|
|
|
|
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
|
|
|
Individual subsystems can be enabled:
|
|
|
|
CONFIG_AVR_INT0=n
|
|
CONFIG_AVR_INT1=n
|
|
CONFIG_AVR_INT2=n
|
|
CONFIG_AVR_INT3=n
|
|
CONFIG_AVR_INT4=n
|
|
CONFIG_AVR_INT5=n
|
|
CONFIG_AVR_INT6=n
|
|
CONFIG_AVR_INT7=n
|
|
CONFIG_AVR_USBHOST=n
|
|
CONFIG_AVR_USBDEV=n
|
|
CONFIG_AVR_WDT=n
|
|
CONFIG_AVR_TIMER0=n
|
|
CONFIG_AVR_TIMER1=n
|
|
CONFIG_AVR_TIMER2=n
|
|
CONFIG_AVR_TIMER3=n
|
|
CONFIG_AVR_SPI=n
|
|
CONFIG_AVR_USART1=y
|
|
CONFIG_AVR_ANACOMP=n
|
|
CONFIG_AVR_ADC=n
|
|
CONFIG_AVR_TWI=n
|
|
|
|
If the watchdog is enabled, this specifies the initial timeout. Default
|
|
is maximum supported value.
|
|
|
|
CONFIG_WDTO_15MS
|
|
CONFIG_WDTO_30MS
|
|
CONFIG_WDTO_60MS
|
|
CONFIG_WDTO_120MS
|
|
CONFIG_WDTO_1250MS
|
|
CONFIG_WDTO_500MS
|
|
CONFIG_WDTO_1S
|
|
CONFIG_WDTO_2S
|
|
CONFIG_WDTO_4S
|
|
CONFIG_WDTO_8S
|
|
|
|
AT90USB specific device driver settings
|
|
|
|
CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
|
|
console and ttys0 (default is no serial console).
|
|
CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
|
|
This specific the size of the receive buffer
|
|
CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
|
|
being sent. This specific the size of the transmit buffer
|
|
CONFIG_USARTn_BAUD - The configure BAUD of the USART. Must be
|
|
CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8.
|
|
CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
|
CONFIG_USARTn_2STOP - Two stop bits
|
|
|
|
Configurations
|
|
^^^^^^^^^^^^^^
|
|
|
|
Common Configuration Notes
|
|
--------------------------
|
|
|
|
1. Each Micropendous3 configuration is maintained in a sub-directory and
|
|
can be selected as follow:
|
|
|
|
tools/configure.sh micropendous3:<subdir>
|
|
|
|
Where <subdir> is one of the configuration sub-directories described in
|
|
the following paragraph.
|
|
|
|
NOTE: You must also copy avr-libc header files, perhaps like:
|
|
|
|
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
|
|
|
2. These configurations use the mconf-based configuration tool. To
|
|
change a configurations using that tool, you should:
|
|
|
|
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
|
see additional README.txt files in the NuttX tools repository.
|
|
|
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
|
reconfiguration process.
|
|
|
|
3. By default, all configurations assume the NuttX Buildroot toolchain
|
|
under Cygwin with Windows. This is easily reconfigured:
|
|
|
|
CONFIG_HOST_WINDOWS=y
|
|
CONFIG_WINDOWS_CYGWIN=y
|
|
CONFIG_AVR_BUILDROOT_TOOLCHAIN=y
|
|
|
|
Configuration Sub-Directories
|
|
-----------------------------
|
|
|
|
hello:
|
|
The simple apps/examples/hello "Hello, World!" example.
|
|
|
|
FLASH/SRAM Requirements (as of 6/16/2011):
|
|
|
|
$ avr-nuttx-elf-size nuttx
|
|
text data bss dec hex filename
|
|
24816 978 308 26102 65f6 nuttx
|
|
|
|
Strings are in SRAM.
|