nuttx/mm/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

choice
	prompt "Build heap manager"
	default MM_DEFAULT_MANAGER

config MM_DEFAULT_MANAGER
	bool "Default heap manager"
	---help---
		NuttX original memory manager strategy.

config MM_CUSTOMIZE_MANAGER
	bool "Customized heap manager"
	---help---
		Customized memory manager policy. The build will fail
		if the MM heap module not defined by customer.

endchoice

config MM_KERNEL_HEAP
	bool "Support a protected, kernel heap"
	default y
	depends on !BUILD_FLAT
	---help---
		Partition heap memory into two parts:  (1) a protected, kernel-mode
		heap accessible only by the NuttX kernel, and (2) an unprotected
		user-mode heap for use by applications.  If you are only interested
		in protected the kernel from read access, then this option is not
		necessary.  If you wish to secure the kernel data as well, then
		this option should be selected.

		The kernel heap size that is used is provided a a platform-specific
		up_allocate_kheap() interface.  This configuration setting is made
		available to that platform specific code.  However, the
		up_allocate_kheap() interface may chose to ignore this setting if it
		has a more appropriate heap allocation strategy.

config MM_KERNEL_HEAPSIZE
	int "Kernel heap size"
	default 8192
	depends on MM_KERNEL_HEAP
	---help---
		This is the size of the a protected, kernel-mode heap (in bytes).
		The remaining of available memory is given to the unprotected
		user-mode heap.  This value may need to be aligned to units of the
		size of the smallest memory protection region.

config MM_SMALL
	bool "Small memory model"
	default n
	---help---
		Each memory allocation has a small allocation overhead.  The size
		of that overhead is normally determined by the "width" of the
		address support by the MCU.  MCUs that support 16-bit addressability
		have smaller overhead than devices that support 32-bit addressability.
		However, there are many MCUs that support 32-bit addressability *but*
		have internal SRAM of size less than or equal to 64Kb.  In this case,
		MM_SMALL can be defined so that those MCUs will also benefit
		from the smaller, 16-bit-based allocation overhead.

		WARNING:  This selection will also change the alignment of allocated
		memory.  For example, on ARM memory will have 8-byte alignment by
		default.  If MM_SMALL is selected, then allocated memory will have
		only 4-byte alignment.  This may be important on some platforms where
		64-bit data is in allocated structures and 8-byte alignment is required.

config MM_REGIONS
	int "Number of memory regions"
	default 1
	---help---
		If the architecture includes multiple, non-contiguous regions of
		memory to allocate from, this specifies the number of memory regions
		that the memory manager must handle and enables the API
		mm_addregion(heap, start, end);

config ARCH_HAVE_HEAP2
	bool
	default n

if ARCH_HAVE_HEAP2

config HEAP2_BASE
	hex "Start address of second user heap region"
	default 0x00000000
	---help---
		The base address of the second heap region.

config HEAP2_SIZE
	int "Size of the second user heap region"
	default 0
	---help---
		The size of the second heap region.

endif # ARCH_HAVE_HEAP2

config GRAN
	bool "Enable Granule Allocator"
	default n
	---help---
		Enable granule allocator support.  Allocations will be aligned to the
		granule size; allocations will be in units of the granule size.
		Larger granules will give better performance and less overhead but
		more losses of memory due to alignment and quantization waste.

		NOTE: The current implementation also restricts the maximum
		allocation size to 32 granules.  That restriction could be
		eliminated with some additional coding effort.

config GRAN_INTR
	bool "Interrupt level support"
	default n
	depends on GRAN
	---help---
		Normally mutual exclusive access to granule allocator data is assured
		using a semaphore.  If this option is set then, instead, mutual
		exclusion logic will disable interrupts.  While this options is more
		invasive to system performance, it will also support use of the granule
		allocator from interrupt level logic.

config DEBUG_GRAN
	bool "Granule Allocator Debug"
	default n
	depends on GRAN && DEBUG_FEATURES
	---help---
		Just like DEBUG_MM, but only generates output from the gran
		allocation logic.

config MM_PGALLOC
	bool "Enable Page Allocator"
	default n
	depends on ARCH_USE_MMU
	select GRAN
	---help---
		Enable support for a MMU physical page allocator based on the
		granule allocator.

if MM_PGALLOC

config MM_PGSIZE
	int "Page Size"
	default 4096
	---help---
		The MMU page size.  Must be one of {1024, 2048, 4096, 8192, or
		16384}.  This is easily extensible, but only those values are
		currently support.

config DEBUG_PGALLOC
	bool "Page Allocator Debug"
	default n
	depends on DEBUG_FEATURES
	---help---
		Just like DEBUG_MM, but only generates output from the page
		allocation logic.

endif # MM_PGALLOC

config MM_SHM
	bool "Shared memory support"
	default n
	depends on MM_PGALLOC && BUILD_KERNEL
	---help---
		Build in support for the shared memory interfaces shmget(), shmat(),
		shmctl(), and shmdt().

config MM_CIRCBUF
	bool "Circular buffer support"
	default n
	---help---
		Build in support for the circular buffer management.

config MM_MEMPOOL
	bool "Enable memory buffer pool"
	default n
	---help---
		Memory buffer pool support. Such pools are mostly used
		for guaranteed, deadlock-free memory allocations.

config FS_PROCFS_EXCLUDE_MEMPOOL
	bool "Exclude mempool"
	default n
	depends on FS_PROCFS

config MM_KASAN
	bool "Kernel Address Sanitizer"
	default n
	---help---
		KASan is a fast compiler-based tool for detecting memory
		bugs in native code. After turn on this option, Please
		add -fsanitize=kernel-address to CFLAGS/CXXFLAGS too.

config MM_KASAN_ALL
	bool "Enable KASan for the entire image"
	depends on MM_KASAN
	default y
	---help---
		This option activates address sanitizer for the entire image.
		If you don't enable this option, you have to explicitly specify
		"-fsanitize=kernel-address" for the files/directories you want
		to check. Enabling this option will get image size increased
		and performance decreased significantly.

config MM_UBSAN
	bool "Undefined Behavior Sanitizer"
	default n
	---help---
		UBSan is a fast undefined behavior detector. UBSan modifies
		the program at compile-time to catch various kinds of
		undefined behavior during program execution

config MM_UBSAN_ALL
	bool "Enable UBSan for the entire image"
	depends on MM_UBSAN
	default y
	---help---
		This option activates UBSan instrumentation for the
		entire image. If you don't enable this option, you have to
		explicitly specify "-fsanitize=undefined" for
		the files/directories you want to check. Enabling this option
		will get image size increased and performance decreased
		significantly.

config MM_UBSAN_OPTION
	string "UBSan options"
	depends on MM_UBSAN || SIM_UBSAN
	default "-fsanitize=undefined"
	---help---
		This option activates specified UBSan instrumentation. Please
		refer to https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html
		for available options.

config MM_UBSAN_TRAP_ON_ERROR
	bool "Enable UBSan trap on error to crash immediately"
	depends on MM_UBSAN
	default y
	---help---
		The undefined instruction trap should cause your program to crash,
		save the code space significantly.

config MM_FILL_ALLOCATIONS
	bool "Fill allocations with debug value"
	default n
	---help---
		Fill all malloc() allocations with 0xAA. This helps
		detecting uninitialized variable errors.

config MM_BACKTRACE
	int "The depth of backtrace"
	default -1
	---help---
		Config the depth of backtrace in memory block by specified this
		config: disable backtrace by -1, only record pid info by zero and
		enable record backtrace info by 8(fixed depth).

config MM_BACKTRACE_DEFAULT
	bool "Enable the backtrace record by default"
	default n
	depends on MM_BACKTRACE > 0

config MM_DUMP_ON_FAILURE
	bool "Dump heap info on allocation failure"
	default n
	depends on DEBUG_MM

config MM_PANIC_ON_FAILURE
	bool "Panic on allocation failure"
	default n
	depends on DEBUG_MM

source "mm/iob/Kconfig"