177 lines
4.6 KiB
Plaintext
177 lines
4.6 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see misc/tools/kconfig-language.txt.
|
|
#
|
|
|
|
if ARCH_BOARD_SAMA5D3_XPLAINED
|
|
|
|
choice
|
|
prompt "CPU Frequency"
|
|
default SAMA5D3XPLAINED_396MHZ
|
|
|
|
config SAMA5D3XPLAINED_384MHZ
|
|
bool "384 MHz"
|
|
|
|
config SAMA5D3XPLAINED_396MHZ
|
|
bool "396 MHz"
|
|
|
|
config SAMA5D3XPLAINED_528MHZ
|
|
bool "528 MHz"
|
|
|
|
endchoice # CPU Frequency
|
|
|
|
config SAMA5D3XPLAINED_SLOWCLOCK
|
|
bool
|
|
default y if SCHED_TICKLESS
|
|
default n if !SCHED_TICKLESS
|
|
|
|
choice
|
|
prompt "SAMA5D3-Xplained DRAM Type"
|
|
default SAMA5D3XPLAINED_MT47H128M16RT
|
|
depends on SAMA5_DDRCS
|
|
|
|
config SAMA5D3XPLAINED_MT47H128M16RT
|
|
bool "MT47H128M16RT"
|
|
---help---
|
|
Micron 2Gbit x16 DDR2-1066 128Mb
|
|
|
|
config SAMA5D3XPLAINED_MT47H64M16HR
|
|
bool "MT47H64M16HR"
|
|
---help---
|
|
Micron 1Gbit x16 DDR2-800 64Mb
|
|
|
|
endchoice # SAMA5D3-Xplained DRAM Type
|
|
|
|
config SAMA5D3XPLAINED_NAND_BLOCKMOUNT
|
|
bool "NAND FLASH auto-mount"
|
|
default n
|
|
depends on NSH_ARCHINIT && SAMA5_EBICS3_NAND
|
|
---help---
|
|
Automatically initialize the NAND FLASH driver when NSH starts.
|
|
|
|
choice
|
|
prompt "NAND FLASH configuration"
|
|
default SAMA5D3XPLAINED_NAND_NXFFS
|
|
depends on SAMA5D3XPLAINED_NAND_BLOCKMOUNT
|
|
|
|
config SAMA5D3XPLAINED_NAND_FTL
|
|
bool "Create NAND FLASH block driver"
|
|
depends on MTD && MTD_NAND
|
|
---help---
|
|
Create the MTD driver for the NAND and "wrap" the NAND as a standard
|
|
block driver that could then, for example, be mounted using FAT or
|
|
any other file system. Any file system may be used, but there will
|
|
be no wear-leveling.
|
|
|
|
NOTE: This options is not currently recommended. There is not now
|
|
NuttX file system that can handle the NAND back blocks or performs
|
|
wear-leveling other than NXFFS and NXFFS does not use a block driver
|
|
but, rather, operates directly upon the NAND MTD device.
|
|
|
|
config SAMA5D3XPLAINED_NAND_NXFFS
|
|
bool "Create NAND FLASH NXFFS file system"
|
|
depends on MTD && MTD_NAND && FS_NXFFS && NXFFS_NAND
|
|
---help---
|
|
Create the MTD driver for the NAND and mount the NAND device as
|
|
a wear-leveling, NuttX FLASH file system (NXFFS). The downside of
|
|
NXFFS is that it can be very slow.
|
|
|
|
NOTE: NXFFS is recommended because (1) it can handle the NAND back
|
|
blocks and (1) performs wear-leveling.
|
|
|
|
endchoice # NAND FLASH configuration
|
|
|
|
config SAMA5D3XPLAINED_AT25_AUTOMOUNT
|
|
bool "AT25 serial FLASH auto-mount"
|
|
default n
|
|
depends on NSH_ARCHINIT && SAMA5_SPI0 && MTD_AT25
|
|
---help---
|
|
Automatically initialize the AT25 SPI FLASH driver when NSH starts.
|
|
|
|
choice
|
|
prompt "AT25 serial FLASH configuration"
|
|
default SAMA5D3XPLAINED_AT25_FTL
|
|
depends on SAMA5D3XPLAINED_AT25_AUTOMOUNT
|
|
|
|
config SAMA5D3XPLAINED_AT25_FTL
|
|
bool "Create AT25 Serial FLASH block driver"
|
|
---help---
|
|
Create the MTD driver for the AT25 and "wrap" the AT25 as a standard
|
|
block driver that could then, for example, be mounted using FAT or
|
|
any other file system. Any file system may be used, but there will
|
|
be no wear-leveling.
|
|
|
|
config SAMA5D3XPLAINED_AT25_NXFFS
|
|
bool "Create AT25 serial FLASH NXFFS file system"
|
|
depends on FS_NXFFS
|
|
---help---
|
|
Create the MTD driver for the AT25 and mount the AT25 device as
|
|
a wear-leveling, NuttX FLASH file system (NXFFS). The downside of
|
|
NXFFS is that it can be very slow.
|
|
|
|
endchoice # AT25 serial FLASH configuration
|
|
|
|
config SAMA5D3XPLAINED_USBHOST_STACKSIZE
|
|
int "USB host waiter stack size"
|
|
default 1536 if USBHOST_HUB
|
|
default 1024 if !USBHOST_HUB
|
|
depends on USBHOST
|
|
|
|
config SAMA5D3XPLAINED_USBHOST_PRIO
|
|
int "USB host waiter task priority"
|
|
default 100
|
|
depends on USBHOST
|
|
|
|
config SAMA5D3XPLAINED_CHANNEL
|
|
int "PWM channel number"
|
|
default 0 if SAMA5_PWM_CHAN0
|
|
default 1 if SAMA5_PWM_CHAN1
|
|
default 2 if SAMA5_PWM_CHAN2
|
|
default 3 if SAMA5_PWM_CHAN3
|
|
range 0 3
|
|
depends on PWM && SAMA5_PWM
|
|
---help---
|
|
Selects the PWM channel number that will be used to perform the PWM
|
|
test. See apps/examples/pwm.
|
|
|
|
if AUDIO_I2SCHAR && (SAMA5_SSC0 || SAMA5_SSC1)
|
|
|
|
if SAMA5_SSC0 && SAMA5_SSC1
|
|
|
|
config SAMA5D3XPLAINED_SSC_PORT
|
|
int "SSC port number"
|
|
default 0
|
|
range 0 1
|
|
---help---
|
|
Specify the I2S port to use, i.e., 0 for SSC0 or 1 for SSC1
|
|
|
|
endif # SAMA5_SSC0 && SAMA5_SSC1
|
|
|
|
if SAMA5_SSC0 && !SAMA5_SSC1
|
|
|
|
config SAMA5D3XPLAINED_SSC_PORT
|
|
int
|
|
default 0
|
|
|
|
endif # SAMA5_SSC0 && !SAMA5_SSC1
|
|
|
|
if !SAMA5_SSC0 && SAMA5_SSC1
|
|
|
|
config SAMA5D3XPLAINED_SSC_PORT
|
|
int
|
|
default 1
|
|
|
|
endif # SAMA5_SSC0 && !SAMA5_SSC1
|
|
|
|
config SAMA5D3XPLAINED_I2SCHAR_MINOR
|
|
int "I2S character driver minor number"
|
|
default 0
|
|
---help---
|
|
The minor device number to use when registering the I2S character
|
|
device. The driver will be registered at /dev/is2charN where N is
|
|
the value provided by this setting.
|
|
|
|
endif # AUDIO_I2SCHAR && (SAMA5_SSC0 || SAMA5_SSC1)
|
|
|
|
endif # ARCH_BOARD_SAMA5D3_XPLAINED
|