443 lines
12 KiB
Plaintext
443 lines
12 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config ARCH_BOARD_NUCLEO_WL55JC_DEMO_LED_IRQ
|
|
bool "[demo] LED on button interrupt"
|
|
depends on ARCH_BUTTONS
|
|
depends on NSH_ARCHINIT
|
|
---help---
|
|
When enabled, pressing B3 button will toggle red LED.
|
|
This options is mostly for demo purposes of how one
|
|
can install GPIO interrupt.
|
|
|
|
comment "[demo] LED on button interrupt requires NSH_ARCHINIT"
|
|
depends on !NSH_ARCHINIT || !ARCH_BUTTONS
|
|
|
|
menuconfig ARCH_BOARD_FLASH_MOUNT
|
|
bool "Enable FLASH partitioning and mounting"
|
|
depends on !DISABLE_MOUNTPOINT
|
|
select MTD
|
|
select MTD_PROGMEM
|
|
select MTD_PARTITION
|
|
select MTD_PARTITION_NAMES
|
|
select FS_PROCFS
|
|
default n
|
|
---help---
|
|
When enabled, you will be able to configure partition table
|
|
for onboard FLASH memory to create and mount flash filesystems.
|
|
All partition sizes are specified in PAGE_SIZE size. On
|
|
STM32WL5 page size is always 2048.
|
|
|
|
On STM32WL55JC there are 128 pages of flash memory. Size of
|
|
all configured partitions shall not exceed 128. In fact, it
|
|
should be equal to 128 or else you will simply have unused
|
|
space on flash. Even if you want some raw flash access you
|
|
should specify this partition in table and select fs_raw.
|
|
|
|
By default there are only 4 partitions defined, if you need
|
|
more, you can define more in Kconfig and stm32_flash.c files.
|
|
|
|
comment "FLASH partitioning and mounting requires !DISABLE_MOUNTPOINT"
|
|
depends on DISABLE_MOUNTPOINT
|
|
|
|
if ARCH_BOARD_FLASH_MOUNT
|
|
|
|
config ARCH_BOARD_FLASH_BL_PROG_SIZE
|
|
int "Size reserved for bootloader program code"
|
|
default 0
|
|
---help---
|
|
How much memory to reserve for bootloader program code.
|
|
If you are using bootloader in your application, specify
|
|
max size of bootloader partition. This memory will be
|
|
reserved at the beginning of flash, and CPU1 progmem will
|
|
be right after bootloader.
|
|
|
|
If you don't use bootloader and just want to run program
|
|
directly after reset, set this to 0.
|
|
|
|
config ARCH_BOARD_FLASH_CPU1_PROG_SIZE
|
|
int "Size reserved for CPU1 program code"
|
|
default 127
|
|
---help---
|
|
How much memory to reserve for CPU1 program code. This should
|
|
specified as other partitions will be created at offset to
|
|
this partition.
|
|
|
|
config ARCH_BOARD_FLASH_CPU2_PROG_SIZE
|
|
int "Size reserved for CPU2 program code"
|
|
default 0
|
|
---help---
|
|
How much memory to reserve for CPU2 program code. If you use
|
|
dual CPU you should specify how much memory you want to
|
|
reserve for code for second CPU. User partition will be
|
|
created at this offset. If you don't use CPU2, set this to 0.
|
|
|
|
config ARCH_BOARD_FLASH_PART1_SIZE
|
|
int "Size of user partition 1"
|
|
default 1
|
|
---help---
|
|
Size of partition specified in PAGE_SIZE. Page size on
|
|
stm32wl5xxx is always 2048.
|
|
|
|
config ARCH_BOARD_FLASH_PART1_NAME
|
|
string "Name of user partition 1"
|
|
default "part1"
|
|
---help---
|
|
MTD partition name, this can be later read by MTD API,
|
|
or it can also be read from /proc/partitions to easily
|
|
identify partitions.
|
|
|
|
config ARCH_BOARD_FLASH_PART1_MNT
|
|
string "Mount point for user partition 1"
|
|
default "/mnt/part1"
|
|
---help---
|
|
Directory where filesystem should be mounted.
|
|
|
|
Note: not all filesystems can be mounted. rawfs and
|
|
mtdconfig for example cannot be mounted. In that case
|
|
this config will be ignored.
|
|
|
|
config ARCH_BOARD_FLASH_PART1_FS
|
|
string
|
|
default "rawfs" if ARCH_BOARD_FLASH_PART1_FS_RAWFS
|
|
default "nxffs" if ARCH_BOARD_FLASH_PART1_FS_NXFFS
|
|
default "smartfs" if ARCH_BOARD_FLASH_PART1_FS_SMARTFS
|
|
default "mtdconfig" if ARCH_BOARD_FLASH_PART1_FS_MTDCONFIG
|
|
|
|
choice
|
|
prompt "Filesystem of user partition 1"
|
|
default ARCH_BOARD_FLASH_PART1_FS_RAW
|
|
|
|
config ARCH_BOARD_FLASH_PART1_FS_RAWFS
|
|
bool "rawfs"
|
|
---help---
|
|
Raw block device /dev/mtdblockN will be available to use
|
|
with standard open(2)/fopen(3) functions.
|
|
|
|
config ARCH_BOARD_FLASH_PART1_FS_NXFFS
|
|
select FS_NXFFS
|
|
bool "nxffs"
|
|
---help---
|
|
Partition will be used as nxffs. Only one nxffs partition
|
|
can be enabled at one given time!
|
|
|
|
config ARCH_BOARD_FLASH_PART1_FS_SMARTFS
|
|
select FS_SMARTFS
|
|
select MTD_SMART
|
|
bool "smartfs"
|
|
---help---
|
|
Partition will be used as smartfs. After first flash, you
|
|
will have to format partition with "mksmartfs /dev/smartN"
|
|
command. This has to be done only once unless you change
|
|
partition table that would affect offsets and/or sizes.
|
|
Programmers (like openocd) should not touch this memory
|
|
when flashing new software, unless you exceeded reserved
|
|
memory for program code.
|
|
|
|
Smartfs uses quite substential ammount of FLASH data to
|
|
get to workable state and mount. Looks like 8 page sizes
|
|
is absolute minimum (so a 16KiB!).
|
|
|
|
config ARCH_BOARD_FLASH_PART1_FS_MTDCONFIG
|
|
select MTD_CONFIG
|
|
bool "mtdconfig"
|
|
---help---
|
|
Purpose build filesystem to hold application's configuration.
|
|
It's not a filesystem per se, as it cannot be mounted and
|
|
setting and retrieving configuration is done via ioctl(2)
|
|
calls.
|
|
|
|
endchoice # Filesystem of user partition 1
|
|
|
|
config ARCH_BOARD_FLASH_PART2_SIZE
|
|
int "Size of user partition 2"
|
|
default 0
|
|
|
|
if ARCH_BOARD_FLASH_PART2_SIZE > 0
|
|
|
|
config ARCH_BOARD_FLASH_PART2_NAME
|
|
string "Name of user partition 2"
|
|
default "part2"
|
|
|
|
config ARCH_BOARD_FLASH_PART2_MNT
|
|
string "Mount point for user partition 2"
|
|
default "/mnt/part2"
|
|
|
|
config ARCH_BOARD_FLASH_PART2_FS
|
|
string
|
|
default "rawfs" if ARCH_BOARD_FLASH_PART2_FS_RAWFS
|
|
default "nxffs" if ARCH_BOARD_FLASH_PART2_FS_NXFFS
|
|
default "smartfs" if ARCH_BOARD_FLASH_PART2_FS_SMARTFS
|
|
default "mtdconfig" if ARCH_BOARD_FLASH_PART2_FS_MTDCONFIG
|
|
|
|
choice
|
|
prompt "Filesystem of user partition 2"
|
|
default ARCH_BOARD_FLASH_PART2_FS_RAW
|
|
|
|
config ARCH_BOARD_FLASH_PART2_FS_RAWFS
|
|
bool "rawfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART2_FS_NXFFS
|
|
select FS_NXFFS
|
|
bool "nxffs"
|
|
|
|
config ARCH_BOARD_FLASH_PART2_FS_SMARTFS
|
|
select FS_SMARTFS
|
|
select MTD_SMART
|
|
bool "smartfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART2_FS_MTDCONFIG
|
|
select MTD_CONFIG
|
|
bool "mtdconfig"
|
|
|
|
endchoice # Filesystem of user partition 2
|
|
|
|
config ARCH_BOARD_FLASH_PART3_SIZE
|
|
int "Size of user partition 3"
|
|
default 0
|
|
|
|
if ARCH_BOARD_FLASH_PART3_SIZE > 0
|
|
|
|
config ARCH_BOARD_FLASH_PART3_NAME
|
|
string "Name of user partition 3"
|
|
default "part3"
|
|
|
|
config ARCH_BOARD_FLASH_PART3_MNT
|
|
string "Mount point for user partition 3"
|
|
default "/mnt/part3"
|
|
|
|
config ARCH_BOARD_FLASH_PART3_FS
|
|
string
|
|
default "rawfs" if ARCH_BOARD_FLASH_PART3_FS_RAWFS
|
|
default "nxffs" if ARCH_BOARD_FLASH_PART3_FS_NXFFS
|
|
default "smartfs" if ARCH_BOARD_FLASH_PART3_FS_SMARTFS
|
|
default "mtdconfig" if ARCH_BOARD_FLASH_PART3_FS_MTDCONFIG
|
|
|
|
choice
|
|
prompt "Filesystem of user partition 3"
|
|
default ARCH_BOARD_FLASH_PART3_FS_RAW
|
|
|
|
config ARCH_BOARD_FLASH_PART3_FS_RAWFS
|
|
bool "rawfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART3_FS_NXFFS
|
|
select FS_NXFFS
|
|
bool "nxffs"
|
|
|
|
config ARCH_BOARD_FLASH_PART3_FS_SMARTFS
|
|
select FS_SMARTFS
|
|
select MTD_SMART
|
|
bool "smartfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART3_FS_MTDCONFIG
|
|
select MTD_CONFIG
|
|
bool "mtdconfig"
|
|
|
|
endchoice # Filesystem of user partition 3
|
|
|
|
config ARCH_BOARD_FLASH_PART4_SIZE
|
|
int "Size of user partition 4"
|
|
default 0
|
|
|
|
if ARCH_BOARD_FLASH_PART4_SIZE > 0
|
|
|
|
config ARCH_BOARD_FLASH_PART4_NAME
|
|
string "Name of user partition 4"
|
|
default "part4"
|
|
|
|
config ARCH_BOARD_FLASH_PART4_MNT
|
|
string "Mount point for user partition 4"
|
|
default "/mnt/part4"
|
|
|
|
config ARCH_BOARD_FLASH_PART4_FS
|
|
string
|
|
default "rawfs" if ARCH_BOARD_FLASH_PART4_FS_RAWFS
|
|
default "nxffs" if ARCH_BOARD_FLASH_PART4_FS_NXFFS
|
|
default "smartfs" if ARCH_BOARD_FLASH_PART4_FS_SMARTFS
|
|
default "mtdconfig" if ARCH_BOARD_FLASH_PART4_FS_MTDCONFIG
|
|
|
|
choice
|
|
prompt "Filesystem of user partition 4"
|
|
default ARCH_BOARD_FLASH_PART4_FS_RAW
|
|
|
|
config ARCH_BOARD_FLASH_PART4_FS_RAWFS
|
|
bool "rawfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART4_FS_NXFFS
|
|
select FS_NXFFS
|
|
bool "nxffs"
|
|
|
|
config ARCH_BOARD_FLASH_PART4_FS_SMARTFS
|
|
select FS_SMARTFS
|
|
select MTD_SMART
|
|
bool "smartfs"
|
|
|
|
config ARCH_BOARD_FLASH_PART4_FS_MTDCONFIG
|
|
select MTD_CONFIG
|
|
bool "mtdconfig"
|
|
|
|
endchoice # Filesystem of user partition 4
|
|
|
|
endif # ARCH_BOARD_FLASH_PART2_SIZE > 0
|
|
endif # ARCH_BOARD_FLASH_PART3_SIZE > 0
|
|
endif # ARCH_BOARD_FLASH_PART4_SIZE > 0
|
|
|
|
endif # ARCH_BOARD_FLASH_MOUNT
|
|
|
|
if LCD_SSD1680 && ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
menu "E-ink SSD1680 pins config"
|
|
|
|
choice
|
|
prompt "Port that handles Chip Select line (output)"
|
|
default SSD1680_GPIO_CS_PORTA if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config SSD1680_GPIO_CS_DISABLED
|
|
bool "Not available"
|
|
|
|
config SSD1680_GPIO_CS_PORTA
|
|
bool "Port A"
|
|
|
|
config SSD1680_GPIO_CS_PORTB
|
|
bool "Port B"
|
|
|
|
config SSD1680_GPIO_CS_PORTC
|
|
bool "Port C"
|
|
|
|
config SSD1680_GPIO_CS_PORTD
|
|
bool "Port D"
|
|
|
|
endchoice
|
|
|
|
if SSD1680_GPIO_CS_PORTA || SSD1680_GPIO_CS_PORTB || SSD1680_GPIO_CS_PORTC || SSD1680_GPIO_CS_PORTD
|
|
config SSD1680_GPIO_PIN_CS
|
|
int "Pin that select the chip on SPI bus (output)"
|
|
default "4" if ARCH_BOARD_NUCLEO_WL55JC
|
|
range 0 15
|
|
endif #SSD1680_GPIO_CS_PORTA || SSD1680_GPIO_CS_PORTB || SSD1680_GPIO_CS_PORTC || SSD1680_GPIO_CS_PORTD
|
|
|
|
choice
|
|
prompt "Port that handles Data/!Command line"
|
|
default SSD1680_GPIO_DTA_CMD_PORTA if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config SSD1680_GPIO_DTA_CMD_DISABLED
|
|
bool "Not available"
|
|
|
|
config SSD1680_GPIO_DTA_CMD_PORTA
|
|
bool "Port A"
|
|
|
|
config SSD1680_GPIO_DTA_CMD_PORTB
|
|
bool "Port B"
|
|
|
|
config SSD1680_GPIO_DTA_CMD_PORTC
|
|
bool "Port C"
|
|
|
|
config SSD1680_GPIO_DTA_CMD_PORTD
|
|
bool "Port D"
|
|
|
|
endchoice
|
|
|
|
if SSD1680_GPIO_DTA_CMD_PORTA || SSD1680_GPIO_DTA_CMD_PORTB || SSD1680_GPIO_DTA_CMD_PORTC || SSD1680_GPIO_DTA_CMD_PORTD
|
|
config SSD1680_GPIO_PIN_DTA_CMD
|
|
int "Pin that switch between command and data on 4-wire SPI bus"
|
|
default "9" if ARCH_BOARD_NUCLEO_WL55JC
|
|
range 0 15
|
|
endif #SSD1680_GPIO_DTA_CMD_PORTA || SSD1680_GPIO_DTA_CMD_PORTB || SSD1680_GPIO_DTA_CMD_PORTC || SSD1680_GPIO_DTA_CMD_PORTD
|
|
|
|
choice
|
|
prompt "Port that handles reset line (output)"
|
|
default SSD1680_GPIO_RST_PORTC if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config SSD1680_GPIO_RST_DISABLED
|
|
bool "Not available"
|
|
|
|
config SSD1680_GPIO_RST_PORTA
|
|
bool "Port A"
|
|
|
|
config SSD1680_GPIO_RST_PORTB
|
|
bool "Port B"
|
|
|
|
config SSD1680_GPIO_RST_PORTC
|
|
bool "Port C"
|
|
|
|
config SSD1680_GPIO_RST_PORTD
|
|
bool "Port D"
|
|
endchoice
|
|
|
|
if SSD1680_GPIO_RST_PORTA || SSD1680_GPIO_RST_PORTB || SSD1680_GPIO_RST_PORTC || SSD1680_GPIO_RST_PORTD
|
|
config SSD1680_GPIO_PIN_RST
|
|
int "Pin that handles the reset line (output)"
|
|
default "2" if ARCH_BOARD_NUCLEO_WL55JC
|
|
range 0 15
|
|
endif #SSD1680_GPIO_RST_PORTA || SSD1680_GPIO_RST_PORTB || SSD1680_GPIO_RST_PORTC || SSD1680_GPIO_RST_PORTD
|
|
|
|
choice
|
|
prompt "Port that handles busy line (input)"
|
|
default SSD1680_GPIO_BUSY_PORTC if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config SSD1680_GPIO_BUSY_DISABLED
|
|
bool "Not available"
|
|
|
|
config SSD1680_GPIO_BUSY_PORTA
|
|
bool "Port A"
|
|
|
|
config SSD1680_GPIO_BUSY_PORTB
|
|
bool "Port B"
|
|
|
|
config SSD1680_GPIO_BUSY_PORTC
|
|
bool "Port C"
|
|
|
|
config SSD1680_GPIO_BUSY_PORTD
|
|
bool "Port D"
|
|
|
|
endchoice
|
|
|
|
if SSD1680_GPIO_BUSY_PORTA || SSD1680_GPIO_BUSY_PORTB || SSD1680_GPIO_BUSY_PORTC || SSD1680_GPIO_BUSY_PORTD
|
|
config SSD1680_GPIO_PIN_BUSY
|
|
int "Pin that handles the busy line (input)"
|
|
default "1" if ARCH_BOARD_NUCLEO_WL55JC
|
|
range 0 15
|
|
endif #SSD1680_GPIO_BUSY_PORTA || SSD1680_GPIO_BUSY_PORTB || SSD1680_GPIO_BUSY_PORTC || SSD1680_GPIO_BUSY_PORTD
|
|
|
|
choice
|
|
prompt "Port that handles power line"
|
|
default SSD1680_GPIO_PWR_DISABLED if ARCH_BOARD_NUCLEO_WL55JC
|
|
|
|
config SSD1680_GPIO_PWR_DISABLED
|
|
bool "Not available"
|
|
|
|
config SSD1680_GPIO_PWR_PORTA
|
|
bool "Port A"
|
|
|
|
config SSD1680_GPIO_PWR_PORTB
|
|
bool "Port B"
|
|
|
|
config SSD1680_GPIO_PWR_PORTC
|
|
bool "Port C"
|
|
|
|
config SSD1680_GPIO_PWR_PORTD
|
|
bool "Port D"
|
|
|
|
endchoice
|
|
|
|
if SSD1680_GPIO_PWR_PORTA || SSD1680_GPIO_PWR_PORTB || SSD1680_GPIO_PWR_PORTC || SSD1680_GPIO_PWR_PORTD
|
|
config SSD1680_GPIO_PIN_PWR
|
|
int "Pin that handles the pwr on/off line (output)"
|
|
range 0 31
|
|
endif #SSD1680_GPIO_PWR_PORTA || SSD1680_GPIO_PWR_PORTB || SSD1680_GPIO_PWR_PORTC || SSD1680_GPIO_PWR_PORTD
|
|
|
|
|
|
config SSD1680_SPI_BUS
|
|
int "Spi bus no"
|
|
range 1 2
|
|
default "1"
|
|
endmenu
|
|
|
|
endif #LCD_SSD1680
|
|
|
|
endif # ARCH_BOARD_NUCLEO_WL55JC
|