204 lines
7.3 KiB
C
204 lines
7.3 KiB
C
/************************************************************************************
|
|
* configs/stm32f103-minimum/include/board.h
|
|
*
|
|
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
|
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
|
* Laurent Latil <laurent@latil.nom.fr>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_STM32F103_MINIMUM_BOARD_H
|
|
#define __CONFIGS_STM32F103_MINIMUM_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
#ifdef __KERNEL__
|
|
# include "stm32_rcc.h"
|
|
# include "stm32_sdio.h"
|
|
# include "stm32.h"
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* On-board crystal frequency is 8MHz (HSE) */
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul
|
|
|
|
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
|
|
|
|
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
|
#define STM32_CFGR_PLLXTPRE 0
|
|
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
|
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLL */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* APB2 timers 1 and 8 will receive PCLK2. */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB1 timers 2-7 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* USB divider -- Divide PLL clock by 1.5 */
|
|
|
|
#define STM32_CFGR_USBPRE 0
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1 */
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM3_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM4_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM5_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM6_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM7_FREQUENCY STM32_PCLK1_FREQUENCY
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
|
* to service FIFOs in interrupt driven mode. These values have not been
|
|
* tuned!!!
|
|
*
|
|
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
|
*/
|
|
|
|
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* BUTTON definitions ***************************************************************/
|
|
|
|
#define NUM_BUTTONS 2
|
|
|
|
#define BUTTON_USER1 0
|
|
#define BUTTON_USER2 1
|
|
#define BUTTON_USER1_BIT (1 << BUTTON_USER1)
|
|
#define BUTTON_USER2_BIT (1 << BUTTON_USER2)
|
|
|
|
/* LED definitions ******************************************************************/
|
|
|
|
/* Define how many LEDs this board has (needed by userleds) */
|
|
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* The board has only one controllable LED */
|
|
|
|
#define LED_STARTED 0 /* No LEDs */
|
|
#define LED_HEAPALLOCATE 1 /* LED1 on */
|
|
#define LED_IRQSENABLED 2 /* LED2 on */
|
|
#define LED_STACKCREATED 3 /* LED1 on */
|
|
#define LED_INIRQ 4 /* LED1 off */
|
|
#define LED_SIGNAL 5 /* LED2 on */
|
|
#define LED_ASSERTION 6 /* LED1 + LED2 */
|
|
#define LED_PANIC 7 /* LED1 / LED2 blinking */
|
|
|
|
/* PWM
|
|
*
|
|
* The STM32F103-Minimum has no real on-board PWM devices, but the board can
|
|
* be configured to output a pulse train using TIM3 CH3 on PB0.
|
|
*
|
|
* Note: we don't need redefine GPIO_TIM3_CH3OUT because PB0 is not remap pin.
|
|
*/
|
|
|
|
/* RGB LED
|
|
*
|
|
* R = TIM1 CH1 on PA8 | G = TIM2 CH2 on PA1 | B = TIM4 CH4 on PB9
|
|
*
|
|
* Note: Pin configs: GPIO_TIM1_CH1OUT ; GPIO_TIM2_CH2OUT ; GPIO_TIM4_CH4OUT
|
|
*/
|
|
|
|
#define RGBLED_RPWMTIMER 1
|
|
#define RGBLED_RPWMCHANNEL 1
|
|
#define RGBLED_GPWMTIMER 2
|
|
#define RGBLED_GPWMCHANNEL 2
|
|
#define RGBLED_BPWMTIMER 4
|
|
#define RGBLED_BPWMCHANNEL 4
|
|
|
|
#endif /* __CONFIGS_STM32F103_MINIMUM_BOARD_H */
|