This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
README
^^^^^^
README for NuttX port to the Embedded Artists LPCXpresso LPC1115 board
featuring the NXP LPC1115 MCU.
Contents
^^^^^^^^
LCPXpresso LPC1115 Board
Code Red IDE
Using OpenOCD
LEDs
LPCXpresso Configuration Options
Configurations
LCPXpresso LPC1115 Board
^^^^^^^^^^^^^^^^^^^^^^^^
Pin Description Connector
-------------------------------- ---------
P0[0]/RD1/TXD3/SDA1 J6-9
P0[1]/TD1/RXD3/SCL J6-10
P0[2]/TXD0/AD0[7] J6-21
P0[3]/RXD0/AD0[6] J6-22
P0[4]/I2SRX-CLK/RD2/CAP2.0 J6-38
P0[5]/I2SRX-WS/TD2/CAP2.1 J6-39
P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8
P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7
P0[8]/I2STX_WS/MISO1/MAT2[2] J6-6
P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5
P0[10] J6-40
P0[11] J6-41
P1[0]/ENET-TXD0 J6-34?
P1[1]/ENET_TXD1 J6-35?
P1[4]/ENET_TX_EN
P1[8]/ENET_CRS
P1[9]/ENET_RXD0
P1[10]/ENET_RXD1
P2[0]/PWM1.1/TXD1
P2[1]/PWM1.2/RXD1 J6-43
P2[2]/PWM1.3/CTS1/TRACEDATA[3] J6-44
P2[3]/PWM1.4/DCD1/TRACEDATA[2] J6-45
P2[4]/PWM1.5/DSR1/TRACEDATA[1] J6-46
P2[5]/PWM1[6]/DTR1/TRACEDATA[0] J6-47
P2[6]/PCAP1[0]/RI1/TRACECLK J6-48
P2[7]/RD2/RTS1 J6-49
P2[8]/TD2/TXD2 J6-50
P2[9]/USB_CONNECT/RXD2 PAD19
P2[10]/EINT0/NMI J6-51
P3[25]/MAT0.0/PWM1.2 PAD13
P3[26]/STCLK/MAT0.1/PWM1.3 PAD14
Code Red IDE
^^^^^^^^^^^^
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project.
Makefile Build
--------------
Under Linux Eclipse, it is pretty easy to set up an "empty makefile project" and
simply use the NuttX makefile to build the system. That is almost for free
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
there is a lot of help on the internet).
Native Build
------------
Here are a few tips before you start that effort:
1) Select the toolchain that you will be using in your .config file
2) Start the NuttX build at least one time from the Cygwin command line
before trying to create your project. This is necessary to create
certain auto-generated files and directories that will be needed.
3) Set up include pathes: You will need include/, arch/arm/src/lpc11xx,
arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
4) All assembly files need to have the definition option -D __ASSEMBLY__
on the command line.
Startup files will probably cause you some headaches. The NuttX startup file
is arch/arm/src/lpc11x/lpc11_vectors.S.
Using Code Red GNU Tools from Cygwin
------------------------------------
Under Cygwin, the Code Red command line tools (e.g., arm-non-eabi-gcc) cannot
be executed because they only have execute privileges for Administrators. I
worked around this by:
Opening a native Cygwin RXVT as Administrator (Right click, "Run as administrator"),
then executing 'chmod 755 *.exe' in the following directories:
/cygdrive/c/nxp/lpcxpreeso_3.6/bin, and
/cygdrive/c/nxp/lpcxpreeso_3.6/Tools/bin
Command Line Flash Programming
------------------------------
During the port development was used a STLink-v2 SWD programmer with OpenOCD to
write the firmware in the flash and GDB to debug NuttX initialization.
If using LPCLink as your debug connection, first of all boot the LPC-Link using
the script:
bin\Scripts\bootLPCXpresso type
where type = winusb for Windows XP, or type = hid for Windows Vista / 7.
Now run the flash programming utility with the following options
flash_utility wire -ptarget -flash-load[-exec]=filename [-load-base=base_address]
Where flash_utility is one of:
crt_emu_lpc11_13 (for LPC11xx or LPC13xx parts)
crt_emu_cm3_nxp (for LPC11xx parts)
crt_emu_a7_nxp (for LPC21/22/23/24 parts)
crt_emu_a9_nxp (for LPC31/32 and LPC29xx parts)
crt_emu_cm3_lmi (for TI Stellaris parts)
wire is one of:
(empty) (for Red Probe+, Red Probe, RDB1768v1, or TI Stellaris evaluation boards)
-wire=hid (for RDB1768v2 without upgraded firmware)
-wire=winusb (for RDB1768v2 with upgraded firmware)
-wire=winusb (for LPC-Link on Windows XP)
-wire=hid (for LPC-Link on Windows Vista/ Windows 7)
target is the target chip name. For example LPC1343, LPC1114/301, LPC1115 etc.
filename is the file to flash program. It may be an executable (axf) or a binary
(bin) file. If using a binary file, the base_address must be specified.
base_address is the base load address when flash programming a binary file. It
should be specified as a hex value with a leading 0x.
Note:
- flash-load will leave the processor in a stopped state
- flash-load-exec will start execution of application as soon as download has
completed.
Examples
To load the executable file app.axf and start it executing on an LPC1158
target using Red Probe, use the following command line:
crt_emu_cm3_nxp -pLPC1158 -flash-load-exec=app.axf
To load the binary file binary.bin to address 0x1000 to an LPC1343 target
using LPC-Link on Windows XP, use the following command line:
crt_emu_lpc11_13_nxp -wire=hid -pLPC1343 -flash-load=binary.bin -load-base=0x1000
tools/flash.sh
--------------
All of the above steps are automated in the bash script flash.sh that can
be found in the configs/lpcxpresso/tools directory.
Using OpenOCD
^^^^^^^^^^^^^
https://acassis.wordpress.com/2015/03/29/using-openocd-to-program-the-lpc1115-lpcxpresso-board/
Using OpenOCD to program the LPC1115 LPCXpresso board
March 29, 2015 by acassis
Unfortunately NXP uses a built-in programmer in the LPCXpresso board
called LPCLink that is not supported by OpenOCD and there is not (AFAIK)
an option to replace its firmware.
Then I decided to cut the board to separate the “LPCXpresso LPC1115 REV A”
from the LPCLink programmer.
So I used a simple and low cost STLink-v2 programmer board that is
supported by OpenOCD. In order to use OpenOCD to reprogram the LPC1115
board we need to connect four wires from STLink-v2 to LPC1115 board:
STLink-v2 | LPC1115 Board
------------------------------
GND GND
3V3 3V3
IO AD4
CLK P0.10
Also we need to instruct OpenOCD to use SWD protocol. You can do it
creating the following config openocd.cfg file:
# LPC1115 LPCXpresso Target
# Using stlink as SWD programmer
source [find interface/stlink-v2.cfg]
# SWD as transport
transport select hla_swd
# Use LPC1115 target
set WORKAREASIZE 0x4000
source [find target/lpc11xx.cfg]
Now execute OpenOCD using the created config file:
$ sudo openocd -f openocd.cfg
Open On-Chip Debugger 0.9.0-dev-00251-g1fa4c72 (2015-01-28-20:08)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 10 kHz
adapter_nsrst_delay: 200
Info : Unable to match requested speed 10 kHz, using 5 kHz
Info : Unable to match requested speed 10 kHz, using 5 kHz
Info : clock speed 5 kHz
Info : STLINK v2 JTAG v17 API v2 SWIM v4 VID 0x0483 PID 0x3748
Info : using stlink api v2
Info : Target voltage: 3.137636
Info : lpc11xx.cpu: hardware has 4 breakpoints, 2 watchpoints
Connect to OpenOCD server:
$ telnet 127.0.0.1 4444
Reset the CPU and flash the lpc1115_blink.bin file:
> reset halt
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x1fff0040 msp: 0x10000ffc
> flash probe 0
flash 'lpc2000' found at 0x00000000
> flash write_image erase blink_lpc1115.bin 0x00000000
auto erase enabled
target state: halted
target halted due to breakpoint, current mode: Thread
xPSR: 0x01000000 pc: 0x10000108 msp: 0x100001b8
Verification will fail since checksum in image (0x00000000) to be written to flash is different from calculated vector checksum (0xefffebe9).
To remove this warning modify build tools on developer PC to inject correct LPC vector checksum.
wrote 4096 bytes from file blink_lpc1115.bin in 0.592621s (6.750 KiB/s)
> reset run
The checksum warning message could be removed if you add the checksum to
binary, read this post:
http://sigalrm.blogspot.com.br/2011/10/cortex-m3-exception-vector-checksum.html.
The blink LED sample I got from Frank Duignan’s page:
http://eleceng.dit.ie/frank/arm/BareMetalLPC1114/index.html
Edit Makefile and configure LIBSPEC to point out to the right path:
LIBSPEC=-L /usr/lib/gcc/arm-none-eabi/4.8/armv6-m
$ make
To generate the final binary I used objcopy:
$ arm-none-eabi-objcopy -O binary main.elf blink_lpc1115.bin
https://acassis.wordpress.com/2015/05/22/using-openocd-and-gdb-to-debug-my-nuttx-port-to-lpc11xx/
Using OpenOCD and gdb to debug my NuttX port to LPC11xx
May 22, 2015 by acassis
I’m porting NuttX to LPC11xx (using the LPCXpresso LPC1115 board) and
these are the steps I used to get OpenOCD and GDB working to debug my firmware:
The openocd.cfg to use with STLink-v2 SWD programmer:
# LPC1115 LPCXpresso Target
# Using stlink as SWD programmer
source [find interface/stlink-v2.cfg]
# SWD as transport
transport select hla_swd
# Use LPC1115 target
set WORKAREASIZE 0x4000
source [find target/lpc11xx.cfg]
You need to execute “reset halt” from OpenOCD telnet server to get
“monitor reset halt” working on gdb:
$ telnet 127.0.0.1 4444Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Open On-Chip Debugger
> reset halt
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x1fff0040 msp: 0x10000ffc
> exit
Now execute the command arm-none-eabi-gdb (from Debian/Ubuntu package
“gdb-arm-none-eabi”) passing the nuttx ELF file:
$ arm-none-eabi-gdb nuttx
GNU gdb (7.7.1+dfsg-1+6) 7.7.1
Reading symbols from nuttx...done.
(gdb) target remote localhost:3333
Remote debugging using localhost:3333
0x1fff0040 in ?? ()
(gdb) monitor reset halt
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x1fff0040 msp: 0x10000ffc
(gdb) load
Loading section .vectors, size 0xc0 lma 0x0
Loading section .text, size 0x9197 lma 0x410
Loading section .ARM.exidx, size 0x8 lma 0x95a8
Loading section .data, size 0x48 lma 0x95b0
Start address 0x410, load size 37543
Transfer rate: 9 KB/sec, 6257 bytes/write.
(gdb) b __start
Breakpoint 1 at 0x410: file chip/lpc11_start.c, line 109.
(gdb) step
Note: automatically using hardware breakpoints for read-only addresses.
Breakpoint 1, __start () at chip/lpc11_start.c:109
109 {
(gdb)
115 lpc11_clockconfig();
(gdb)
lpc11_clockconfig () at chip/lpc11_clockconfig.c:93
93 putreg32(SYSCON_SYSPLLCLKSEL_IRCOSC, LPC11_SYSCON_SYSPLLCLKSEL);
(gdb)
96 putreg32((SYSCON_SYSPLLCTRL_MSEL_DIV(4) | SYSCON_SYSPLLCTRL_PSEL_DIV2), LPC11_SYSCON_SYSPLLCTRL);
(gdb) p /x *0x40048008 <--- this is the LPC11_SYSCON_SYSPLLCTRL register address
$2 = 0x23
(gdb)
You can use breakpoints, steps and many other GDB features.
That is it!
LEDs
^^^^
If CONFIG_ARCH_LEDS is defined, then support for the LPCXpresso LEDs will be
included in the build. See:
- configs/lpcxpresso-lpc1115/include/board.h - Defines LED constants, types and
prototypes the LED interface functions.
- configs/lpcxpresso-lpc1115/src/lpcxpresso-lpc1115.h - GPIO settings for the LEDs.
- configs/lpcxpresso-lpc1115/src/up_leds.c - LED control logic.
The LPCXpresso LPC1115 has a single LEDs. Usage this single LED by NuttX
is as follows:
- The LED is not illuminated until the LPCXpresso completes initialization.
If the LED is stuck in the OFF state, this means that the LPCXpresso did not
complete initializeation.
- Each time the OS enters an interrupt (or a signal) it will turn the LED OFF and
restores its previous stated upon return from the interrupt (or signal).
The normal state, after initialization will be a dull glow. The brightness of
the glow will be inversely related to the proportion of time spent within interrupt
handling logic. The glow may decrease in brightness when the system is very
busy handling device interrupts and increase in brightness as the system becomes
idle.
Stuck in the OFF state suggests that that the system never completed
initialization; Stuck in the ON state would indicated that the system
intialialized, but is not takint interrupts.
- If a fatal assertion or a fatal unhandled exception occurs, the LED will flash
strongly as a slow, 2Hz rate.
LPCXpresso Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
General Architecture Settings:
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=arm
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CORTEXM0=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=lpc11xx
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP_LPC1115=y
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=lpcxpresso-lpc1115
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_LPCEXPRESSO=y
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_RAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
CONFIG_RAM_SIZE=(8*1024) (8Kb)
There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
CONFIG_RAM_START - The start address of installed DRAM
CONFIG_RAM_START=0x10000000
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
Individual subsystems can be enabled:
CONFIG_LPC11_MAINOSC=y
CONFIG_LPC11_PLL0=y
CONFIG_LPC11_UART0=y
CONFIG_LPC11_CAN1=n
CONFIG_LPC11_SPI=n
CONFIG_LPC11_SSP0=n
CONFIG_LPC11_SSP1=n
CONFIG_LPC11_I2C0=n
CONFIG_LPC11_I2S=n
CONFIG_LPC11_TMR0=n
CONFIG_LPC11_TMR1=n
CONFIG_LPC11_PWM0=n
CONFIG_LPC11_ADC=n
CONFIG_LPC11_FLASH=n
LPC11xx specific device driver settings
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
console and ttys0 (default is the UART0).
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
LPC11xx specific CAN device driver settings. These settings all
require CONFIG_CAN:
CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default
Standard 11-bit IDs.
CONFIG_LPC11_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC11_CAN1
is defined.
CONFIG_LPC11_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this
number. (the CCLK frequency is divided by this number to get the CAN
clock). Options = {1,2,4,6}. Default: 4.
CONFIG_LPC11_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
Configurations
^^^^^^^^^^^^^^
Each LPCXpresso configuration is maintained in a sub-directory and can be
selected as follow:
tools/configure.sh lpcxpresso-lpc1115/<subdir>
Where <subdir> is one of the following:
nsh:
---
Configures the NuttShell (nsh) located at apps/examples/nsh. The
Configuration enables both the serial and telnet NSH interfaces.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
see additional README.txt files in the NuttX tools repository.
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. This configuration has been used for testing the microSD card.
This support is, however, disabled in the base configuration.
At last attempt, the SPI-based mircroSD does not work at
higher fequencies. Setting the SPI frequency to 400000
removes the problem. There must be some more optimal
value that could be determined with additional experimetnation.
Jumpers: J55 must be set to provide chip select PIO1_11 signal as
the SD slot chip select.
