nuttx/boards/arm/s32k3xx/mr-canhubk3/scripts/flash.ld
2022-12-01 08:00:32 -05:00

163 lines
4.6 KiB
Plaintext

/****************************************************************************
* boards/arm/s32k3xx/mr-canhubk3/scripts/flash.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* Copyright 2022 NXP */
/* TO DO: ADD DESCRIPTION
*
* 0x00400000 - 0x007fffff 4194304 Program Flash (last 64K sBAF)
* 0x10000000 - 0x1003ffff 262144 Data Flash (last 32K HSE_NVM)
* 0x20400000 - 0x20408000 32768 Standby RAM_0 (32K)
* 0x20400000 - 0x20427fff 163840 SRAM_0
* 0x20428000 - 0x2044ffff 163840 SRAM_1
*
* Last 48 KB of SRAM_1 reserved by HSE Firmware
* Last 128 KB of CODE_FLASH_3 reserved by HSE Firmware
* Last 128 KB of DATA_FLASH reserved by HSE Firmware (not supported in this linker file)
*
* Note Standby RAM and SRAM overlaps in NuttX since we dont use the Standby functionality
*
*/
MEMORY
{
BOOT_HEADER (R) : ORIGIN = 0x00400000, LENGTH = 0x00001000 /* 0x00400000 - 0x00400fff */
flash (rx) : ORIGIN = 0x00401000, LENGTH = 0x003cffff /* 0x00401000 - (0x007fffff - 0x20000 (128 KB) = 0x007dffff) */
sram0_stdby (rwx) : ORIGIN = 0x20400000, LENGTH = 32K
sram (rwx) : ORIGIN = 0x20400000, LENGTH = 272K
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
EXTERN(boot_header)
ENTRY(_stext)
SECTIONS
{
.boot_header :
{
KEEP(*(.boot_header))
} > BOOT_HEADER
.text :
{
_stext = ABSOLUTE(.);
*(.vectors)
*(.text.__start)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section :
{
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
.ARM.extab :
{
*(.ARM.extab*)
} >flash
.ARM.exidx :
{
__exidx_start = ABSOLUTE(.);
*(.ARM.exidx*)
__exidx_end = ABSOLUTE(.);
} >flash
/* Due ECC initialization sequence __data_start__ and __data_end__ should be aligned on 8 bytes */
.data :
{
. = ALIGN(8);
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(8);
_edata = ABSOLUTE(.);
} > sram AT > flash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(8):
{
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfuncs = ABSOLUTE(.);
} > sram AT > flash
_framfuncs = LOADADDR(.ramfunc);
/* Due ECC initialization sequence __bss_start__ and __bss_end__ should be aligned on 8 bytes */
.bss :
{
. = ALIGN(8);
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(8);
_ebss = ABSOLUTE(.);
} > sram
CM7_0_START_ADDRESS = ORIGIN(flash);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
SRAM_BASE_ADDR = ORIGIN(sram);
SRAM_END_ADDR = ORIGIN(sram) + LENGTH(sram);
SRAM_STDBY_BASE_ADDR = ORIGIN(sram0_stdby);
SRAM_STDBY_END_ADDR = ORIGIN(sram0_stdby) + LENGTH(sram0_stdby);
SRAM_INIT_END_ADDR = ORIGIN(sram) + 320K;
ITCM_BASE_ADDR = ORIGIN(itcm);
ITCM_END_ADDR = ORIGIN(itcm) + LENGTH(itcm);
DTCM_BASE_ADDR = ORIGIN(dtcm);
DTCM_END_ADDR = ORIGIN(dtcm) + LENGTH(dtcm);
FLASH_BASE_ADDR = ORIGIN(BOOT_HEADER);
FLASH_END_ADDR = ORIGIN(flash) + LENGTH(flash);
}