28180b49d1
This change adds the following: - Rename the board configuration name from qemu-a53 to qemu-v8a. - Add the configurations for Cortex-A57 and Cortex-A72. Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
318 lines
12 KiB
Plaintext
318 lines
12 KiB
Plaintext
README.txt
|
||
==========
|
||
|
||
This board configuration will use QEMU to emulate generic ARM64 v8-A series
|
||
hardware platform and provides support for these devices:
|
||
|
||
- GICv3 interrupt controller
|
||
- ARM Generic Timer
|
||
- PL011 UART controller
|
||
|
||
Contents
|
||
========
|
||
- Getting Started
|
||
- Status
|
||
- Platform Features
|
||
- Debugging with QEMU
|
||
- FPU Support and Performance
|
||
- SMP Support
|
||
- References
|
||
|
||
Getting Started
|
||
===============
|
||
|
||
1. Compile Toolchain
|
||
1.1 Host environment
|
||
GNU/Linux: Ubuntu 18.04 or greater
|
||
1.2 Download and Install
|
||
$ wget https://developer.arm.com/-/media/Files/downloads/gnu/11.2-2022.02/binrel/gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf.tar.xz
|
||
$ xz -d gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf.tar.xz
|
||
$ tar xf gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf.tar
|
||
|
||
Put gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf/bin/ to your host PATH environment variable, like:
|
||
$ export PATH=$PATH:/opt/software/arm/linaro-toolchain/gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf/bin
|
||
check the toolchain:
|
||
$ aarch64-none-elf-gcc -v
|
||
|
||
2. Install QEMU
|
||
In Ubuntu 18.04(or greater), install qemu:
|
||
$ sudo apt-get install qemu-system-arm qemu-efi-aarch64 qemu-utils
|
||
And make sure install is properly:
|
||
$ qemu-system-aarch64 --help
|
||
|
||
3. Configuring and running
|
||
3.1 Single Core
|
||
Configuring NuttX and compile:
|
||
$ ./tools/configure.sh -l qemu-armv8a:nsh
|
||
$ make
|
||
Running with qemu
|
||
$ qemu-system-aarch64 -cpu cortex-a53 -nographic \
|
||
-machine virt,virtualization=on,gic-version=3 \
|
||
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
|
||
-mon chardev=con,mode=readline -kernel ./nuttx
|
||
|
||
3.2 SMP
|
||
Configuring NuttX and compile:
|
||
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
|
||
$ make
|
||
Running with qemu
|
||
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
|
||
-machine virt,virtualization=on,gic-version=3 \
|
||
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
|
||
-mon chardev=con,mode=readline -kernel ./nuttx
|
||
|
||
Note:
|
||
1. Make sure the aarch64-none-elf toolchain install PATH has been added to environment variable
|
||
2. To quit QEMU, type Ctrl + X
|
||
3. Nuttx default core number is 4, and Changing CONFIG_SMP_NCPUS > 4 and setting qemu command
|
||
option -smp will boot more core. For qemu, core limit is 32.
|
||
|
||
Status
|
||
======
|
||
|
||
2022-10-13:
|
||
1. Renamed the board configuration name from qemu-a53 to qemu-v8a.
|
||
|
||
2. Added the configurations for Cortex-A57 and Cortex-A72.
|
||
|
||
2022-07-01:
|
||
|
||
1. It's very stranger to see that signal testing of ostest is PASSED at Physical Ubuntu PC
|
||
rather than an Ubuntu at VMWare. For Physical Ubuntu PC, I have run the ostest
|
||
for 10 times at least but never see the crash again, but it's almost crashed every time
|
||
running the ostest at Virtual Ubuntu in VMWare
|
||
I check the fail point. It's seem at signal routine to access another CPU's task context reg
|
||
will get a NULL pointer, but I watch the task context with GDB, everything is OK.
|
||
So maybe this is a SMP cache synchronize issue? But I have done cache synchronize
|
||
operation at thread switch and how to explain why the crash not happening at
|
||
Physical Ubuntu PC?
|
||
So maybe this is a qemu issue at VMWare. I am planning to run
|
||
the arm64 to real hardware platform like IMX8 and will check the issue again
|
||
|
||
2022-06-12:
|
||
|
||
1. SMP is support at QEMU. Add psci interface, armv8 cache operation(data cache)
|
||
and smccc support. The system can run into nsh shell, SMP test is PASSED, but
|
||
ostest crash at signal testing
|
||
|
||
|
||
2022-05-22:
|
||
Arm64 support version for NuttX is Ready, These Features supported:
|
||
1.Cotex-a53 single core support: With the supporting of GICv3,
|
||
Arch timer, PL101 UART, The system can run into nsh shell.
|
||
Running ostest seem PASSED.
|
||
|
||
2.qemu-a53 board configuration support: qemu-a53 board can configuring
|
||
and compiling, And running with qemu-system-aarch64
|
||
at Ubuntu 18.04.
|
||
3.FPU support for armv8-a: FPU context switching in NEON/floating-point
|
||
TRAP was supported. FPU registers saving at vfork and independent
|
||
FPU context for signal routine was considered but more testing
|
||
needs to be do.
|
||
|
||
Platform Features
|
||
=================
|
||
|
||
The following hardware features are supported:
|
||
+--------------+------------+----------------------+
|
||
| Interface | Controller | Driver/Component |
|
||
+==============+============+======================+
|
||
| GIC | on-chip | interrupt controller |
|
||
+--------------+------------+----------------------+
|
||
| PL011 UART | on-chip | serial port |
|
||
+--------------+------------+----------------------+
|
||
| ARM TIMER | on-chip | system clock |
|
||
+--------------+------------+----------------------+
|
||
|
||
The kernel currently does not support other hardware features on this
|
||
qemu platform.
|
||
|
||
|
||
Debugging with QEMU
|
||
===================
|
||
|
||
The nuttx ELF image can be debugged with QEMU.
|
||
|
||
1. To debug the nuttx (ELF) with symbols, make sure the following change have
|
||
applied to defconfig.
|
||
|
||
+CONFIG_DEBUG_SYMBOLS=y
|
||
|
||
2. Run QEMU(at shell terminal 1)
|
||
|
||
Single Core
|
||
$ qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 \
|
||
-net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline \
|
||
-kernel ./nuttx -S -s
|
||
SMP
|
||
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 \
|
||
-net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline \
|
||
-kernel ./nuttx -S -s
|
||
|
||
|
||
3. Run gdb with TUI, connect to QEMU, load nuttx and continue (at shell terminal 2)
|
||
|
||
$ aarch64-none-elf-gdb -tui --eval-command='target remote localhost:1234' nuttx
|
||
(gdb) set debug aarch64
|
||
(gdb) c
|
||
Continuing.
|
||
^C
|
||
Program received signal SIGINT, Interrupt.
|
||
arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
(gdb)
|
||
(gdb) where
|
||
#0 arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
#1 0x00000000402823ec in nx_start () at init/nx_start.c:742
|
||
#2 0x0000000040280148 in arm64_boot_primary_c_routine () at common/arm64_boot.c:184
|
||
#3 0x00000000402a5bf8 in switch_el () at common/arm64_head.S:201
|
||
(gdb)
|
||
|
||
SMP Case
|
||
Thread 1 received signal SIGINT, Interrupt.
|
||
arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
(gdb) info threads
|
||
Id Target Id Frame
|
||
* 1 Thread 1 (CPU#0 [halted ]) arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
2 Thread 2 (CPU#1 [halted ]) arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
3 Thread 3 (CPU#2 [halted ]) arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
4 Thread 4 (CPU#3 [halted ]) arch_cpu_idle () at common/arm64_cpu_idle.S:37
|
||
(gdb)
|
||
|
||
Note:
|
||
1. it will make your debugging more easier in source level if you setting
|
||
CONFIG_DEBUG_FULLOPT=n. but there is a risk of stack overflow when the
|
||
option is disabled. Just enlarging your stack size will avoid the
|
||
issue (eg. enlarging CONFIG_DEFAULT_TASK_STACKSIZE)
|
||
2. TODO: ARMv8-A Supporting for tools/nuttx-gdbinit
|
||
|
||
|
||
FPU Support and Performance
|
||
===========================
|
||
I was using FPU trap to handle FPU context switch. For threads accessing
|
||
the FPU (FPU instructions or registers), a trap will happen at this thread,
|
||
the FPU context will be saved/restore for the thread at the trap handler.
|
||
It will improve performance for thread switch since it's not to save/restore
|
||
the FPU context (almost 512 bytes) at the thread switch anymore. But some issue
|
||
need to be considered:
|
||
|
||
1. Floating point argument passing issue
|
||
In many cases, the FPU trap is triggered by va_start() that copies
|
||
the content of FP registers used for floating point argument passing
|
||
into the va_list object in case there were actual float arguments from
|
||
the caller. But In practice this is almost never the case.
|
||
Seeing the save_count/restore_count at the g_cpu_fpu_ctx, which will
|
||
be increase when saving/restoring FPU context. After running ostest,
|
||
we can see the count with GDB:
|
||
|
||
(gdb) p g_cpu_fpu_ctx
|
||
$1 = {{fpu_owner = 0x0, idle_thread = 0x402b3110 <g_idletcb>,
|
||
save_count = 1293, restore_count = 2226, switch_count = 4713,
|
||
exe_depth_count = 0}}
|
||
(gdb)
|
||
|
||
adding -mgeneral-regs-only option will make compiler not use the FPU
|
||
register, we can use the following patch to syslog:
|
||
|
||
diff --git a/libs/libc/syslog/Make.defs b/libs/libc/syslog/Make.defs
|
||
index c58fb45512..acac6febaa
|
||
--- a/libs/libc/syslog/Make.defs
|
||
+++ b/libs/libc/syslog/Make.defs
|
||
@@ -26,3 +26,4 @@ CSRCS += lib_syslog.c lib_setlogmask.c
|
||
|
||
DEPPATH += --dep-path syslog
|
||
VPATH += :syslog
|
||
+syslog/lib_syslog.c_CFLAGS += -mgeneral-regs-only
|
||
|
||
With the option to make NuttX and booting. After running ostest, see
|
||
the count with GDB again:
|
||
|
||
(gdb) p g_cpu_fpu_ctx
|
||
$1 = {{fpu_owner = 0x0, idle_thread = 0x402b3110 <g_idletcb>, save_count = 141,
|
||
restore_count = 170, switch_count = 4715, exe_depth_count = 0}}
|
||
(gdb)
|
||
|
||
it's only 141/170 for saving/restoring FPU context, which is 1293/2226 before
|
||
add this compile option. Almost all of FPU accessing switch is argument passing
|
||
at the syslog.
|
||
I cannot commit the patch for NuttX mainline because it's very special case
|
||
since ostest is using syslog for lots of information printing. but this is
|
||
a clue for FPU performance analysis. va_list object is using for many C code to
|
||
handle argument passing, but if it's not passing floating point argument indeed.
|
||
Add the option to your code maybe increase FPU performance
|
||
|
||
2. FPU trap at IRQ handler
|
||
it's probably need to handle FPU trap at IRQ routine. Exception_depth is
|
||
handling for this case, it will inc/dec at enter/leave exception. If the
|
||
exception_depth > 1, that means an exception occurring when another exception
|
||
is executing, the present implement is to switch FPU context to idle thread,
|
||
it will handle most case for calling printf-like routine at IRQ routine.
|
||
But in fact, this case will make uncertainty interrupt processing time sine
|
||
it's uncertainty for trap exception handling. It would be best to add
|
||
"-mgeneral-regs-only" option to compile the IRQ code avoiding accessing FP
|
||
register.
|
||
if it's necessarily for the exception routine to use FPU, calling function to
|
||
save/restore FPU context directly maybe become a solution. Linux kernel introduce
|
||
kernel_neon_begin/kernel_neon_end function for this case. Similar function will
|
||
be add to NuttX if this issue need to be handle.
|
||
|
||
SMP Support
|
||
===========
|
||
1. Booting
|
||
Primary core call sequence
|
||
arm64_start
|
||
->arm64_boot_primary_c_routine
|
||
->arm64_chip_boot
|
||
->set init TBBR and Enable MMU
|
||
->nx_start
|
||
->OS component initialize
|
||
->Initialize GIC: GICD and Primary core GICR
|
||
->nx_smp_start
|
||
for every CPU core
|
||
->up_cpu_start
|
||
->arm64_start_cpu(call PCSI to boot CPU)
|
||
->waiting for every core to boot
|
||
->nx_bringup
|
||
|
||
Secondary Core call sequence
|
||
arm64_start
|
||
->arm64_boot_secondary_c_routine
|
||
->Enable MMU
|
||
->Initialize GIC: Secondary core GICR
|
||
->Notify Primary core booting is Ready
|
||
->nx_idle_trampoline
|
||
|
||
2. interrupt
|
||
|
||
SGI
|
||
SGI_CPU_PAUSE: for core pause request, for every core
|
||
|
||
PPI
|
||
ARM_ARCH_TIMER_IRQ: timer interrupt, handle by primary Core
|
||
|
||
SPI
|
||
CONFIG_QEMU_UART_IRQ: serial driver interrupt, handle by primary Core
|
||
|
||
3. Timer
|
||
The origin design for ARMv8-A timer is assigned private timer to
|
||
every PE(CPU core), the ARM_ARCH_TIMER_IRQ is a PPI so it's
|
||
should be enabled at every core.
|
||
|
||
But for NuttX, it's design only for primary core to handle timer
|
||
interrupt and call nxsched_process_timer at timer tick mode.
|
||
So we need only enable timer for primary core
|
||
|
||
IMX6 use GPT which is a SPI rather than generic timer to handle
|
||
timer interrupt
|
||
|
||
References
|
||
===========
|
||
|
||
1. (ID050815) ARM® Cortex®-A Series - Programmer’s Guide for ARMv8-A
|
||
2. (ID020222) Arm® Architecture Reference Manual - for A profile architecture
|
||
3. (ARM062-948681440-3280) Armv8-A Instruction Set Architecture
|
||
4. AArch64 Exception and Interrupt Handling
|
||
5. AArch64 Programmer's Guides Generic Timer
|
||
6. Arm Generic Interrupt Controller v3 and v4 Overview
|
||
7. Arm® Generic Interrupt Controller Architecture Specification GIC architecture version 3 and version 4
|
||
8. (DEN0022D.b) Arm Power State Coordination Interface Platform Design Document
|