a8de37fbec
by this command: git ls-files -z | while IFS= read -rd '' f; do tail -c1 < "$f" | read -r _ || echo >> "$f"; done
280 lines
10 KiB
C
280 lines
10 KiB
C
/*******************************************************************************************
|
|
* drivers/lcd/ft80x.h
|
|
* Definitions for the FTDI FT80x GUI
|
|
*
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* References:
|
|
* - Document No.: FT_000792, "FT800 Embedded Video Engine", Datasheet Version 1.1,
|
|
* Clearance No.: FTDI# 334, Future Technology Devices International Ltd.
|
|
* - Document No.: FT_000986, "FT801 Embedded Video Engine Datasheet", Version 1.0,
|
|
* Clearance No.: FTDI#376, Future Technology Devices International Ltd.
|
|
* - Some definitions derive from FTDI sample code.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*******************************************************************************************/
|
|
|
|
#ifndef __DRIVERS_LCD_FT80X_H
|
|
#define __DRIVERS_LCD_FT80X_H
|
|
|
|
/*******************************************************************************************
|
|
* Included Files
|
|
*******************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <nuttx/signal.h>
|
|
#include <nuttx/wqueue.h>
|
|
|
|
/*******************************************************************************************
|
|
* Public Types
|
|
*******************************************************************************************/
|
|
|
|
/* Host write command
|
|
*
|
|
* For a SPI write command write transaction, the host writes a zero bit followed by a one
|
|
* bit, followed by the 5-bit command, followed by two bytes of zero. All data is streamed
|
|
* with a single chip select.
|
|
*
|
|
* I2C data format is equivalent (with obvious differences in bus protocol)
|
|
*/
|
|
|
|
struct ft80x_hostwrite_s
|
|
{
|
|
uint8_t cmd; /* Bits 6-7: 01, Bits 0-5: command */
|
|
uint8_t pad1; /* Zero */
|
|
uint8_t pad2; /* Zero */
|
|
};
|
|
|
|
/* For SPI memory read transaction, the host sends two zero bits, followed by the 22-bit
|
|
* address. This is followed by a dummy byte. After the dummy byte, the FT80x responds to
|
|
* each host byte with read data bytes.
|
|
*
|
|
* For I2C memory read transaction, bytes are packed in the I2C protocol as follow:
|
|
*
|
|
* [start] <DEVICE ADDRESS + write bit>
|
|
* <00b+Address[21:16]>
|
|
* <Address[15:8]>
|
|
* <Address[7:0]>
|
|
* [restart] <DEVICE ADDRESS + read bit>
|
|
* <Read data byte 0>
|
|
* ....
|
|
* <Read data byte n> [stop]
|
|
*/
|
|
|
|
struct ft80x_spiread_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 00, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
uint8_t dummy; /* Dummy byte */
|
|
};
|
|
|
|
struct ft80x_i2cread_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 00, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
};
|
|
|
|
/* For SPI memory write transaction, the host sends a '1' bit and '0' bit, followed by the
|
|
* 22-bit address. This is followed by the write data.
|
|
*
|
|
* For I2C memory write transaction, bytes are packed in the I2C protocol as follow:
|
|
*
|
|
* [start] <DEVICE ADDRESS + write bit>
|
|
* <10b,Address[21:16]>
|
|
* <Address[15:8]>
|
|
* <Address[7:0]>
|
|
* <Write data byte 0>
|
|
* ....
|
|
* <Write data byte n> [stop]
|
|
*/
|
|
|
|
struct ft80x_spiwrite_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 10, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
/* Write data follows */
|
|
};
|
|
|
|
struct ft80x_spiwrite8_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 10, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
uint8_t data; /* 8-bit data follows */
|
|
};
|
|
struct ft80x_spiwrite16_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 10, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
uint8_t data[2]; /* 16-bit data follows */
|
|
};
|
|
struct ft80x_spiwrite32_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 10, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
uint8_t data[4]; /* 32-bit data follows */
|
|
};
|
|
struct ft80x_i2cwrite_s
|
|
{
|
|
uint8_t addrh; /* Bits 6-7: 10, Bits 0-5: Address[21:16] */
|
|
uint8_t addrm; /* Address[15:8] */
|
|
uint8_t addrl; /* Address[7:0] */
|
|
/* Write data follows */
|
|
};
|
|
|
|
/* This structure describes one signal notification */
|
|
|
|
struct ft80x_eventinfo_s
|
|
{
|
|
struct sigevent event; /* Describe the way a task is to be notified */
|
|
struct sigwork_s work; /* Work for SIGEV_THREAD */
|
|
bool enable; /* True: enable notification; false: disable */
|
|
int16_t pid; /* Send the notification to this task */
|
|
};
|
|
|
|
/* This structure describes the overall state of the FT80x driver */
|
|
|
|
struct spi_dev_s; /* Forward reference */
|
|
struct i2c_master_s; /* Forward reference */
|
|
|
|
struct ft80x_dev_s
|
|
{
|
|
/* Cached interface instances */
|
|
|
|
#ifdef CONFIG_LCD_FT80X_SPI
|
|
FAR struct spi_dev_s *spi; /* Cached SPI device reference */
|
|
#else
|
|
FAR struct i2c_master_s *i2c; /* Cached SPI device reference */
|
|
#endif
|
|
FAR const struct ft80x_config_s *lower; /* Cached lower half instance */
|
|
|
|
/* Internal driver logic */
|
|
|
|
struct work_s intwork; /* Support back end interrupt processing */
|
|
uint32_t frequency; /* Effective frequency */
|
|
sem_t exclsem; /* Mutual exclusion semaphore */
|
|
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
|
|
uint8_t crefs; /* Number of open references */
|
|
bool unlinked; /* True if the driver has been unlinked */
|
|
#endif
|
|
|
|
/* Event notification support */
|
|
|
|
struct ft80x_eventinfo_s notify[FT80X_INT_NEVENTS];
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: ft80x_host_command
|
|
*
|
|
* Description:
|
|
* Send a host command to the FT80x
|
|
*
|
|
* FFor a SPI write command write transaction, the host writes a zero bit
|
|
* followed by a one bit, followed by the 5-bit command, followed by two
|
|
* bytes of zero. All data is streamed with a single chip select.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void ft80x_host_command(FAR struct ft80x_dev_s *priv, uint8_t cmd);
|
|
|
|
/****************************************************************************
|
|
* Name: ft80x_read_memory
|
|
*
|
|
* Description:
|
|
* Read from FT80X memory
|
|
*
|
|
* For SPI memory read transaction, the host sends two zero bits, followed
|
|
* by the 22-bit address. This is followed by a dummy byte. After the dummy
|
|
* byte, the FT80x responds to each host byte with read data bytes.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void ft80x_read_memory(FAR struct ft80x_dev_s *priv, uint32_t addr,
|
|
FAR void *buffer, size_t buflen);
|
|
|
|
/****************************************************************************
|
|
* Name: ft80x_read_byte, ft80x_read_hword, ft80x_read_word
|
|
*
|
|
* Description:
|
|
* Read an 8-, 16-, or 32-bt bit value from FT80X memory
|
|
*
|
|
* For SPI memory read transaction, the host sends two zero bits, followed
|
|
* by the 22-bit address. This is followed by a dummy byte. After the dummy
|
|
* byte, the FT80x responds to each host byte with read data bytes.
|
|
*
|
|
****************************************************************************/
|
|
|
|
uint8_t ft80x_read_byte(FAR struct ft80x_dev_s *priv, uint32_t addr);
|
|
uint16_t ft80x_read_hword(FAR struct ft80x_dev_s *priv, uint32_t addr);
|
|
uint32_t ft80x_read_word(FAR struct ft80x_dev_s *priv, uint32_t addr);
|
|
|
|
/****************************************************************************
|
|
* Name: ft80x_write_memory
|
|
*
|
|
* Description:
|
|
* Write to FT80X memory
|
|
*
|
|
* For SPI memory write transaction, the host sends a '1' bit and '0' bit,
|
|
* followed by the 22-bit address. This is followed by the write data.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void ft80x_write_memory(FAR struct ft80x_dev_s *priv, uint32_t addr,
|
|
FAR const void *buffer, size_t buflen);
|
|
|
|
/****************************************************************************
|
|
* Name: ft80x_write_byte, ft80x_write_hword, ft80x_write_word
|
|
*
|
|
* Description:
|
|
* Write an 8-, 16-, or 32-bt bit value to FT80X memory
|
|
*
|
|
* For SPI memory write transaction, the host sends a '1' bit and '0' bit,
|
|
* followed by the 22-bit address. This is followed by the write data.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void ft80x_write_byte(FAR struct ft80x_dev_s *priv, uint32_t addr,
|
|
uint8_t data);
|
|
void ft80x_write_hword(FAR struct ft80x_dev_s *priv, uint32_t addr,
|
|
uint16_t data);
|
|
void ft80x_write_word(FAR struct ft80x_dev_s *priv, uint32_t addr,
|
|
uint32_t data);
|
|
|
|
#endif /* __DRIVERS_LCD_FT80X_H */
|